diff options
| -rw-r--r-- | kauf-plug-factory.yaml | 47 | ||||
| -rw-r--r-- | kauf-plug.yaml | 2 |
2 files changed, 35 insertions, 14 deletions
diff --git a/kauf-plug-factory.yaml b/kauf-plug-factory.yaml index 8347348..52125b7 100644 --- a/kauf-plug-factory.yaml +++ b/kauf-plug-factory.yaml @@ -39,38 +39,59 @@ script: # set scaling factors to expected test load. # required ranges helps prevent calibration without proper test load. - lambda: |- + uint32_t num_ok = 0; + if ( (id(wattage).state > 20) && (id(wattage).state < 40) ) { auto call = id(scale_power).make_call(); call.set_value(ceil((10.0f*100.0f*26.800f) / id(wattage).state) / 10.0f); call.perform(); + num_ok++; } if ( (id(current).state > 0.05) && (id(current).state < 1.0) ) { auto call = id(scale_current).make_call(); call.set_value(ceil((10.0f*100.0f*0.226f) / id(current).state) / 10.0f); call.perform(); + num_ok++; } if ( (id(voltage).state > 90) && (id(voltage).state < 150) ) { auto call = id(scale_voltage).make_call(); call.set_value(ceil((10.0f*100.0f*120.0f) / id(voltage).state) / 10.0f); call.perform(); + num_ok++; } //test passed, clear first_boot variable so we don't run this again id(first_boot) = false; - # blink blue led to indicate pass test until button is pressed then stay on - - while: - condition: - binary_sensor.is_off: button_in - then: - - light.toggle: blue_led - - delay: 100ms - - # set power monitoring mode to lower frequency default - - select.set: - id: select_monitor_mode - option: "10s P / 40s V,I" - - lambda: global_preferences->sync(); + // finish factory test with results argument + id(finish_factory_test)->execute(num_ok); + + - id: finish_factory_test + parameters: + num_ok: int + then: + + # blink led to indicate finish test until button is pressed then stay on + - while: + condition: + binary_sensor.is_off: button_in + then: + - lambda: |- + if ( num_ok == 3 ) { + auto call = id(blue_led).toggle(); + call.perform(); + } else { + auto call = id(red_led).toggle(); + call.perform(); + } + - delay: 100ms + + # set power monitoring mode to lower frequency default + - select.set: + id: select_monitor_mode + option: "10s P / 40s V,I" + - lambda: global_preferences->sync(); + globals: - id: first_boot # used to run test routine at factory diff --git a/kauf-plug.yaml b/kauf-plug.yaml index ab5a800..31dfc79 100644 --- a/kauf-plug.yaml +++ b/kauf-plug.yaml @@ -15,7 +15,7 @@ substitutions: # https://esphome.io/components/esphome.html#esphome-creators-project project_name: Kauf.PLF10 - project_ver_num: "2.00" + project_ver_num: "2.011" project_ver_let: y # https://esphome.io/components/switch/gpio.html?highlight=restore_mode |