diff options
| -rw-r--r-- | kauf-plug.yaml | 35 |
1 files changed, 14 insertions, 21 deletions
diff --git a/kauf-plug.yaml b/kauf-plug.yaml index 101cb52..bafd239 100644 --- a/kauf-plug.yaml +++ b/kauf-plug.yaml @@ -15,7 +15,7 @@ substitutions: # https://esphome.io/components/esphome.html#esphome-creators-project project_name: Kauf.PLF10 - project_ver_num: "1.963" + project_ver_num: "1.964" project_ver_let: y # https://esphome.io/components/switch/gpio.html?highlight=restore_mode @@ -30,7 +30,7 @@ substitutions: # * have a delay for the desired hold in the on_press script # * stop the on_press script in the on_release script # * place actions in the on_press script after the delay to perform them while still holding the button - # * place actions in the on_release script, with the condition that the on_press script is not running, to + # * place actions in the on_release script, with the condition that the on_press script is not running, to # perform them on release of the button. sub_on_press: script_do_nothing # executes right when button is initially pressed sub_on_release: script_do_nothing # executes right when button is released @@ -127,9 +127,6 @@ wifi: ssid: initial_ap # !secret wifi_ssid password: asdfasdfasdfasdf # !secret wifi_password - # default is 20, 17 is recommended. - output_power: 17 - # using fast_connect as default since it is required for hidden networks. fast_connect: true @@ -159,7 +156,7 @@ web_server: # https://esphome.io/components/binary_sensor/index.html -binary_sensor: +binary_sensor: # button input toggles relay and thereby power led # https://esphome.io/components/binary_sensor/gpio.html @@ -293,14 +290,10 @@ script: - id: script_new_debounce mode: restart # only reboot plug once number is static for 10s. changing value again restarts timer. - then: # only do it if wifi is connected, keeps initial loading of value on boot from causing restart. - - if: - condition: - - wifi.connected - then: - - lambda: ESP_LOGD("kauf-plug.yaml","New debounce value detected, rebooting in 10 seconds to effect change."); - - delay: 10s - - button.press: restart_button + then: + - lambda: ESP_LOGD("kauf-plug.yaml","New debounce value detected, rebooting in 10 seconds to effect change."); + - delay: 10s + - button.press: restart_button - id: script_5s_timer then: @@ -353,7 +346,7 @@ script: else if ( id(select_monitor_mode).state == " 2s P,V Only" ) { id(hlw_main).set_update_interval(2000); id(hlw_main).set_change_mode_every(4294967295); - id(hlw_main).set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_VOLTAGE); } + id(hlw_main).set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_VOLTAGE); } ////////////////////////////////////////////////////////////////////// // Recover legacy button config if present, delete June 1, 2023. If @@ -403,7 +396,7 @@ script: id(button_in).add_filters({button_delayedonfilter}); - + # pwm outputs for LEDs so they can be dimmed # https://esphome.io/components/output/esp8266_pwm.html @@ -456,7 +449,7 @@ light: # https://esphome.io/components/switch/index.html -switch: +switch: # relay output # https://esphome.io/components/switch/gpio.html @@ -527,8 +520,8 @@ sensor: # Power monitoring sensors output to Home Assistant current_resistor: $current_resistor_val voltage_divider: $voltage_divider_val - change_mode_every: $sub_change_mode_every - update_interval: $sub_update_interval + change_mode_every: $sub_change_mode_every + update_interval: $sub_update_interval initial_mode: $sub_initial_mode power: @@ -688,8 +681,8 @@ number: # used as a threshold for whether the plugged-in devices is running forced_hash: 2232959069 forced_addr: 40 global_addr: global_forced_addr - on_value: # currently, have to reboot plug to apply new delayed_on time - - script.execute: script_new_debounce + set_action: # currently, have to reboot plug to apply new delayed_on time + - script.execute: script_new_debounce # https://esphome.io/components/select/index.html # https://esphome.io/components/select/template.html |