diff options
| -rw-r--r-- | kauf-plug-lite.yaml | 63 | ||||
| -rw-r--r-- | kauf-plug-minimal.yaml | 2 |
2 files changed, 4 insertions, 61 deletions
diff --git a/kauf-plug-lite.yaml b/kauf-plug-lite.yaml index fab1985..bc007ec 100644 --- a/kauf-plug-lite.yaml +++ b/kauf-plug-lite.yaml @@ -15,7 +15,7 @@ substitutions: # https://esphome.io/components/esphome.html#esphome-creators-project project_name: Kauf.PLF10 - project_ver_num: "2.00" + project_ver_num: "2.02" project_ver_let: l # https://esphome.io/components/switch/gpio.html?highlight=restore_mode @@ -64,13 +64,11 @@ substitutions: voltage_cal_val2_in: "302.1" voltage_cal_val2_out: "117.1" - # set power monitoring mode in yaml, selecting the "yaml_configured" option in the select entity will cause these - # values to be used after next reboot. + # set power monitoring mode in yaml using substitutions # https://esphome.io/components/sensor/hlw8012.html#configuration-variables sub_change_mode_every: "1" sub_update_interval: 10s sub_initial_mode: CURRENT - select_monitor_mode_initial_option: "10s P / 40s V,I" # GPIO definitions sub_pm_sel_pin: GPIO12 @@ -103,10 +101,6 @@ globals: type: boolean restore_value: no initial_value: "false" - - id: global_has_powermode - type: boolean - restore_value: no - initial_value: "false" # https://esphome.io/components/esphome.html#adjusting-flash-writes @@ -708,55 +702,6 @@ select: - light.turn_off: red_led - script.execute: script_set_power_leds - # change mode of power monitoring - - platform: template - name: $friendly_name Monitoring Mode - id: select_monitor_mode - optimistic: true - options: - - "10s P / 40s V,I" - - "10s P,I Only" - - "10s P,V Only" - - " 2s P,I Only" - - " 2s P,V Only" - - "YAML Configured" - - " 2s P / 8s V,I" - initial_option: $select_monitor_mode_initial_option - restore_value: true - icon: mdi:wrench-clock - entity_category: config - disabled_by_default: $disable_entities - set_action: - - script.execute: script_save_changes - - script.execute: script_setting_reboot - on_value: - - lambda: |- - if ( !id(global_has_powermode) ) { - if ( x == "10s P / 40s V,I") { - id(hlw_main).set_update_interval(10000); - id(hlw_main).set_change_mode_every(1); } - else if ( x == "10s P,I Only" ) { - id(hlw_main).set_update_interval(10000); - id(hlw_main).set_change_mode_every(4294967295); - id(hlw_main).set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_CURRENT); } - else if ( x == "10s P,V Only" ) { - id(hlw_main).set_update_interval(10000); - id(hlw_main).set_change_mode_every(4294967295); - id(hlw_main).set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_VOLTAGE); } - else if ( x == " 2s P / 8s V,I" ) { - id(hlw_main).set_update_interval(2000); - id(hlw_main).set_change_mode_every(1); } - else if ( x == " 2s P,I Only" ) { - id(hlw_main).set_update_interval(2000); - id(hlw_main).set_change_mode_every(4294967295); - id(hlw_main).set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_CURRENT); } - else if ( x == " 2s P,V Only" ) { - id(hlw_main).set_update_interval(2000); - id(hlw_main).set_change_mode_every(4294967295); - id(hlw_main).set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_VOLTAGE); } - id(global_has_powermode) = true; - } - - platform: template name: $friendly_name Boot State id: select_boot_state @@ -784,10 +729,8 @@ select: else relay->set_restore_mode(gpio::GPIO_SWITCH_$sub_restore_mode); - // republish state so it gets saved if necessary - id(relay).publish_state(id(relay).state); - - script.execute: script_save_changes + - script.execute: script_setting_reboot # Send IP Address to HA diff --git a/kauf-plug-minimal.yaml b/kauf-plug-minimal.yaml index a2ad1a1..992f624 100644 --- a/kauf-plug-minimal.yaml +++ b/kauf-plug-minimal.yaml @@ -49,7 +49,7 @@ esphome: # https://esphome.io/components/esphome.html#esphome-creators-project project: name: "Kauf.PLF10" - version: "2.00(m)" + version: "2.02(m)" # https://esphome.io/components/esp8266.html |