diff options
Diffstat (limited to 'kauf-plug.yaml')
| -rw-r--r-- | kauf-plug.yaml | 43 |
1 files changed, 40 insertions, 3 deletions
diff --git a/kauf-plug.yaml b/kauf-plug.yaml index 1dbc699..0be5492 100644 --- a/kauf-plug.yaml +++ b/kauf-plug.yaml @@ -15,11 +15,11 @@ substitutions: # https://esphome.io/components/esphome.html#esphome-creators-project project_name: Kauf.PLF10 - project_ver_num: "1.983" + project_ver_num: "1.99" project_ver_let: y # https://esphome.io/components/switch/gpio.html?highlight=restore_mode - sub_restore_mode: RESTORE_DEFAULT_OFF # overwrite to change boot up behavior of relay + sub_restore_mode: RESTORE_DEFAULT_ON # overwrite to change boot up behavior of relay disable_entities: "true" # set to "false" to have all entities show up in Home Assistant automatically @@ -90,7 +90,7 @@ esp8266: board: esp01_1m restore_from_flash: true early_pin_init: false - start_free: 74 + start_free: 76 global_addr: global_forced_addr @@ -134,6 +134,7 @@ esphome: then: # implementing on_boot automation as a script makes it run in parallel # with any other on_boot scripts. + - script.execute: script_set_power_leds - script.execute: on_wifi_connect @@ -867,6 +868,41 @@ select: id(global_has_powermode) = true; } + - platform: template + name: $friendly_name Boot State + id: select_boot_state + optimistic: true + options: + - "Restore Power Off State" + - "Invert Power Off State" + - "Always On" + - "Always Off" + - "YAML Configured ($sub_restore_mode)" + initial_option: "Restore Power Off State" + restore_value: true + icon: mdi:restart-alert + entity_category: config + forced_hash: 2390278151 + forced_addr: 74 + global_addr: global_forced_addr + on_value: + - lambda: |- + if ( x == "Restore Power Off State") + relay->set_restore_mode(gpio::GPIO_SWITCH_RESTORE_DEFAULT_OFF); + else if ( x == "Invert Power Off State") + relay->set_restore_mode(gpio::GPIO_SWITCH_RESTORE_INVERTED_DEFAULT_OFF); + else if ( x == "Always On") + relay->set_restore_mode(gpio::GPIO_SWITCH_ALWAYS_ON); + else if ( x == "Always Off") + relay->set_restore_mode(gpio::GPIO_SWITCH_ALWAYS_OFF); + else + relay->set_restore_mode(gpio::GPIO_SWITCH_$sub_restore_mode); + + // republish state so it gets saved if necessary + id(relay).publish_state(id(relay).state); + + - script.execute: script_save_changes + # Send IP Address to HA # https://esphome.io/components/text_sensor/wifi_info.html @@ -905,3 +941,4 @@ interval: # 58-59: Scale Current # 60-61: Scale Voltage # 62-73: Red LED light entity +# 74-75: Boot State select entity |