aboutsummaryrefslogtreecommitdiffhomepage
path: root/kauf-plug.yaml
AgeCommit message (Collapse)Author
2022-06-15simplify new debounce scriptKaufman Home Automation
2022-06-10bump versionKaufman Home Automation
2022-06-08bump versionKaufman Home Automation
2022-06-08on_turn_on and on_turn_off scriptsKaufman Home Automation
2022-06-03bump version for new common componentsKaufman Home Automation
2022-05-17v1.96 updateKaufman Home Automation
2022-05-10default to 100ms debounceKaufman Home Automation
2022-05-10v1.94v1.94Kaufman Home Automation
adds button press duration sensor
2022-05-08v1.93Kaufman Home Automation
2022-05-07add button debounce optionsKaufman Home Automation
2022-05-01Update kauf-plug.yamlKaufman Home Automation
2022-05-01Update kauf-plug.yamlKaufman Home Automation
2022-04-30v1.91Kaufman Home Automation
independent configuration of red and blue led functions.
2022-04-27Update kauf-plug.yamlKaufman Home Automation
2022-04-27use modern pin mode definitionKaufman Home Automation
2022-04-26add links etc in commentsKaufman Home Automation
2022-04-01formattingKaufman Home Automation
2022-04-01disable pm mode by defaultKaufman Home Automation
2022-04-01Power monitoring configuration entitiesKaufman Home Automation
2022-03-29bump version for reset functionKaufman Home Automation
2022-03-25add sub version numberKaufman Home Automation
adding sub version for edits to yaml without binary release.
2022-03-25add min save interval for total daily energyKaufman Home Automation
Just realized total daily energy was writing to flash every 10 seconds. With a 5-minute min_save_interval, you could lose up to 5 minutes of data.
2022-03-25Add inverted led optionKaufman Home Automation
2022-03-23Update kauf-plug.yamlKaufman Home Automation
2022-03-22force release versions of external componentsKaufman Home Automation
2022-03-19Use default refresh for external componentsKaufman Home Automation
Make external component refresh at default interval which is hopefully same as dashboard refreshes this yaml file. Keeping changes of yaml in sync with changes of external components.
2022-03-19add project info substitutionsKaufman Home Automation
2022-03-18Capitalize project nameKaufman Home Automation
2022-03-18Update kauf-plug.yamlKaufman Home Automation
2022-03-16rename no api to no hassKaufman Home Automation
api could mean different things. Hass means just home assistant.
2022-03-16bump versionKaufman Home Automation
2022-03-16add local to web serverKaufman Home Automation
2022-03-11update yaml to 1.86Kaufman Home Automation
2022-03-09Load common components firstKaufman Home Automation
2022-03-041.85 base yamlKaufman Home Automation
2022-02-20move forced hash to update yamlKaufman Home Automation
2022-02-16add wifi forced_hashKaufman Home Automation
2022-02-16add common external componentsKaufman Home Automation
2022-02-06v1.84 uploadKaufman Home Automation
2022-01-21Add external componentsKaufman Home Automation
2022-01-21Add y to project versionKaufman Home Automation
Adding y in project version to signify that firmware was built by the user from this yaml file.
2021-12-18v1.83 updateKaufHA
2021-12-14v1.82 config fileKaufHA
2021-12-14Make device name a substitutionKaufHA
2021-12-14Remove WiFi WarningKaufHA
Remove WiFi warning so that dashboard import occurs without error.
2021-12-14upload v1.8 config filesv1.8KaufHA
2021-10-181.7 UpdateKaufHA
Only thing that changed was the version number.
2021-10-11Fix kauf-plug.yaml disable button functionalityKaufHA
2021-10-021.6 upload 1KaufHA
2021-09-23Update kauf-plug.yamlKaufHA
Remove some unnecessary stuff that is recommended to be removed when importing to ESPHome dashboard.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 02:59:42 +0000