substitutions:
  project_ver_let: "f"


packages:
  kauf_plug_update: !include kauf-plug-update.yaml


esphome:
  on_boot:
    then:
      - script.execute: script_factory_test


script:
  - id: script_factory_test
    then:
      # little sequence so factory can confirm firwmare is working.
      - if:
          condition:
            lambda: 'return id(first_boot);'
          then:

            # get AP going ASAP
            - lambda: 'wifi_wificomponent->set_ap_timeout(1);'

            # disable button toggling relay
            - select.set:
                id: select_button
                option: "Don't Toggle"

            # turn on relay to draw current
            - switch.turn_on: relay
            - delay: 1s
            - light.turn_off: blue_led

            # wait until button is pressed, then turn on led
            - while:
                condition:
                  binary_sensor.is_off: button_in
                then:
                  - light.turn_off: blue_led
                  - delay: 50ms
            - while:
                condition:
                  binary_sensor.is_on: button_in
                then:
                  - light.turn_on: blue_led
                  - delay: 50ms

            # give it some time to see if a crash occurs with both AP and relay on
            - delay: 8s

            # test passed, clear first_boot variable so we don't run this again
            - globals.set:
                id: first_boot
                value: 'false'

            # re-enable button toggling relay
            - select.set:
                id: select_button
                option: "Toggle on Release"

            # delay time to save above changes
            - delay: 3s

            # blink blue led to indicate pass test until button is pressed then stay on
            - while:
                condition:
                  binary_sensor.is_off: button_in
                then:
                  - light.toggle: blue_led
                  - delay: 100ms


globals:
  - id: first_boot          # used to run test routine at factory
    type: bool
    restore_value: yes
    initial_value: 'true'