path: root/kauf-plug-lite.yaml

substitutions:

  name: kauf-plug              # **** CHANGE DEVICE NAME TO SOMETHING UNIQUE PER DEVICE.  RENAME YAML FILE TO SAME NAME.    ****
                               # **** USE DASHES (-) INSTEAD OF SPACES OR UNDERSCORE (_).  USE ONLY LOWER CASE LETTERS.     ****
  friendly_name: Kauf Plug     # **** CHANGE FRIENDLY NAME TO SOMETHING UNIQUE PER DEVICE ****


  sub_restore_mode: "RESTORE_DEFAULT_OFF" # overwrite to change boot up behavior of relay
  disable_entities: "true"     # set to "false" to have all entities show up in Home Assistant automatically


  # substitutions for button actions.  yaml dashboard import uses press, but update bin file uses hold_short to allow hold_long
  # to turn on wifi ap.  These substitutions can be overwritten in the user's yaml file to do anything.
  sub_on_press:         script_toggle     # executes right when button is initially pressed
  sub_on_release:       script_do_nothing # executes right when button is released
  sub_on_release_quick: script_do_nothing # executes when button is released after being held under 750ms
  sub_on_release_short: script_do_nothing # executes when button is released after being held between 750ms and 5s
  # For a longer hold, see kauf-plug-update.yaml in the config-update directory.
  # You have to start a time in the on_press script and cancel the timer in the on_release script.
  # or if you wanted to require release, then start a counter on press and check the value on release.
  # If you want to have a hold action, you probably want to toggle on release_quick instead of on_press so that
  # you can perform the hold action without toggling the plug's relay.


  # substitutions for power monitoring calibration.  Allows end users to change calibration in their yaml and still
  # incorporate this file as a package to get all the updates we release.
  current_resistor_val: "0.001"
  voltage_divider_val:  "2401"
  power_cal_val1_in:    "0.0"
  power_cal_val1_out:   "0.0"
  power_cal_val2_in:    "333.8"
  power_cal_val2_out:   "60"
  current_cal_val1_in:  "0.0"
  current_cal_val1_out: "0.0"
  current_cal_val2_in:  "0.6"
  current_cal_val2_out: "0.515"
  voltage_cal_val1_in:  "0.0"
  voltage_cal_val1_out: "0.0"
  voltage_cal_val2_in:  "302.1"
  voltage_cal_val2_out: "117.1"


esp8266:                       # https://esphome.io/components/esp8266.html
  board: esp01_1m
  restore_from_flash: true


preferences:
  flash_write_interval: 3s


esphome:
  name: $name
  project:
    name: "Kauf.PLF10"
    version: "1.87(l)"

wifi:

  # **** ENTER WI-FI CREDENTIALS HERE, USING SECRETS.YAML RECOMMENDED ****
  ssid: initial_ap            # !secret wifi_ssid
  password: asdfasdfasdfasdf  # !secret wifi_password

  # Uncomment below to set a static IP
  # manual_ip:
  #   static_ip: !secret kauf_bulb_rgb_ip_address
  #   gateway: !secret wifi_gateway
  #   subnet: !secret wifi_subnet
  #   dns1: !secret wifi_dns1

  # use_address allows wireless programming through dashboard.
  # Set to the bulb's IP Address.  Remove after programming.
  # use_address: 192.168.86.244

  # default is 20, 17 is recommended.
  output_power: 17

  # using fast_connect as default since it is required for hidden networks.
  fast_connect: true


logger:                               # Enable logging
  # baud_rate: 0                      # Disable UART logging since TX pad not easily available


api:                                  # Enable Home Assistant API
  id: kauf_api
  # password: !secret api_password    # optional password field for Home Assistant API.


ota:
  # password: !secret ota_password    # optional password for OTA updates.
  on_error:
    then:
      - button.press: restart_button


debug:                                # outputs additional debug info when logs start


web_server:                           # web server allows access to device with a web browser
  local: true
  # auth:                             # optional login details for web interface
  #   username: admin
  #   password: !secret web_server_password



# red led, blink when not connected to WiFi or Home Assistant
status_led:
    pin:
      number: GPIO0
      inverted: true

  
binary_sensor:  

    # button input toggles relay and thereby blue led
  - platform: gpio
    id: button_in
    name: $friendly_name Button
    pin:
      number: GPIO13
      mode: INPUT_PULLUP
      inverted: true
    entity_category: ''
    on_press:
        then:
          - script.execute: $sub_on_press
    on_release:
        then:
          - script.execute: $sub_on_release
    on_click:
      - min_length: 20ms
        max_length: 750ms
        then:
          - script.execute: $sub_on_release_quick
      - min_length: 750ms
        max_length: 5s
        then:
          - script.execute: $sub_on_release_short


    # indicates whether plugged-in device is running based on configurable threshold.
  - platform: template
    id: in_use
    name: ${friendly_name} Device In Use

script:
  - id: script_toggle
    then:
      - if:
          condition: # only toggle relay if button is enabled
            lambda: 'return (id(select_button).state == "Enabled");'
          then:
            switch.toggle: relay
  - id: script_do_nothing
    then:
      - lambda: return;
  - id: script_no_hass
    then:
      - delay: 1ms
      - lambda: |-
          if ( id(switch_no_hass).state ) {
            id(kauf_api)->set_reboot_timeout(0);
            id(kauf_api)->status_clear_warning();
          }
          else {
            id(kauf_api)->set_reboot_timeout(900000);
          }


output:
  - platform: esp8266_pwm
    id: blue_led_pwm
    frequency: 1000 Hz
    pin: GPIO2
    inverted: true


light:
  - platform: monochromatic
    name: $friendly_name Blue LED
    id: blue_led
    output: blue_led_pwm
    entity_category: config
    default_transition_length: 0s
    effects:
      - flicker:
          name: Flicker
          alpha: 90%
          intensity: 10%

switch:    

# relay output
  - platform: gpio
    id: relay
    name: $friendly_name
    pin: GPIO4
    entity_category: ''
    restore_mode: $sub_restore_mode

    # automatically make blue led equal relay state
    # don't turn LED on or off if disabled.
    on_turn_on:
      - if:
          condition: # only if blue LED enabled
            lambda: 'return (id(select_led).state == "Enabled");'
          then:
            light.turn_on: blue_led

    on_turn_off:
      - if:
          condition: # only if blue LED enabled
            lambda: 'return (id(select_led).state == "Enabled");'
          then:
            light.turn_off: blue_led
    
  - platform: template
    id: switch_no_hass
    name: $friendly_name No HASS
    optimistic: true
    restore_state: true
    entity_category: config
    disabled_by_default: $disable_entities
    icon: mdi:toggle-switch-off-outline
    on_turn_on:
      - script.execute: script_no_hass
    on_turn_off:
      - script.execute: script_no_hass

button:
  - platform: restart
    id: restart_button
    name: $friendly_name Restart Firmware
    entity_category: diagnostic
    disabled_by_default: $disable_entities


# clock input from Home Assistant used to calculate total daily energy
time:
  - platform: homeassistant
    id: homeassistant_time


sensor:   # Power monitoring sensors output to Home Assistant
  - platform: hlw8012
    sel_pin:
      number: GPIO12
      inverted: True
    cf_pin: GPIO5
    cf1_pin: GPIO14
    current_resistor: $current_resistor_val  # The value of the shunt resistor for current measurement. 
    voltage_divider: $voltage_divider_val    # The value of the voltage divider on the board as (R_upstream + R_downstream) / R_downstream. 
    power:
      name: ${friendly_name} Power
      unit_of_measurement: W
      id: wattage
      filters:
        - calibrate_linear:
            - $power_cal_val1_in -> $power_cal_val1_out
            - $power_cal_val2_in -> $power_cal_val2_out
      on_value:   # set or clear in_use template binary sensor depending on whether power usage is over threshold
        - if:
            condition:
              lambda: 'return (x >= id(threshold).state);'
            then:
              - binary_sensor.template.publish:
                  id: in_use
                  state: ON
            else:
              - binary_sensor.template.publish:
                  id: in_use
                  state: OFF
    current:
      name: ${friendly_name} Current
      unit_of_measurement: A
      filters:
        - calibrate_linear:
            - $current_cal_val1_in -> $current_cal_val1_out
            - $current_cal_val2_in -> $current_cal_val2_out
    voltage:
      name: ${friendly_name} Voltage
      unit_of_measurement: V
      filters:
        - calibrate_linear:
            - $voltage_cal_val1_in -> $voltage_cal_val1_out
            - $voltage_cal_val2_in -> $voltage_cal_val2_out
    change_mode_every: 1 
    update_interval: 10s # 20 second effective update rate for Power, 40 second for Current and Voltage.

# Reports the total Power so-far each day, resets at midnight
# See https://esphome.io/components/sensor/total_daily_energy.html
  - platform: total_daily_energy
    name: ${friendly_name} Total Daily Energy
    power_id: wattage
    filters:
        - multiply: 0.001  ## convert Wh to kWh
    unit_of_measurement: kWh


  - platform: uptime
    name: $friendly_name Uptime
    update_interval: 60s
    entity_category: diagnostic
    disabled_by_default: $disable_entities


number:      # used as a threshold for whether the plugged-in devices is running.
  - platform: template
    name: ${friendly_name} Use Threshold
    min_value: 1
    max_value: 100
    step: 1
    initial_value: 3
    id: threshold
    entity_category: config
    optimistic: true     # required for changing value from home assistant
    restore_value: true
    unit_of_measurement: Watt(s)
    mode: box
    on_value:
      - if:               # set or clear in_use template binary sensor depending on whether power usage is above threshold
          condition:
            lambda: 'return (id(wattage).state >= x);'
          then:
            - binary_sensor.template.publish:
                id: in_use
                state: ON
          else:
            - binary_sensor.template.publish:
                id: in_use
                state: OFF


select:

    # option to disable button
  - platform: template
    name: $friendly_name Button
    id: select_button
    optimistic: true
    options:
      - Enabled
      - Disabled
    initial_option: Enabled
    restore_value: true
    icon: mdi:circle-double
    entity_category: config

    # option to disable blue LED
  - platform: template
    name: $friendly_name LED
    id: select_led
    optimistic: true
    entity_category: config
    options:
      - Enabled
      - Disabled
    initial_option: Enabled
    restore_value: true
    icon: mdi:led-on
    on_value:
      then:           # changing to "disabled" will turn off LED, but then relay will not turn on or off LED.
      - if:           # when "disabled", LED is 100% controlled by light entity.
          condition:
            lambda: 'return ( (id(select_led).state == "Enabled") && id(relay).state );'
          then:
            light.turn_on: blue_led
          else:
            light.turn_off: blue_led


# Send IP Address to HA
text_sensor:
  - platform: wifi_info
    ip_address:
      name: $friendly_name IP Address
      disabled_by_default: $disable_entities