1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
|
substitutions:
name: kauf-plug # **** CHANGE DEVICE NAME TO SOMETHING UNIQUE PER DEVICE. RENAME YAML FILE TO SAME NAME. ****
# **** USE DASHES (-) INSTEAD OF SPACES OR UNDERSCORE (_). USE ONLY LOWER CASE LETTERS. ****
friendly_name: Kauf Plug # **** CHANGE FRIENDLY NAME TO SOMETHING UNIQUE PER DEVICE ****
sub_restore_mode: RESTORE_DEFAULT_OFF # overwrite to change boot up behavior of relay
disable_entities: "true" # set to "false" to have all entities show up in Home Assistant automatically
# substitutions for button actions. yaml dashboard import uses press, but update bin file uses hold_short to allow hold_long
# to turn on wifi ap. These substitutions can be overwritten in the user's yaml file to do anything.
sub_on_press: script_toggle # executes right when button is initially pressed
sub_on_release: script_do_nothing # executes right when button is released
sub_on_release_quick: script_do_nothing # executes when button is released after being held under 750ms
sub_on_release_short: script_do_nothing # executes when button is released after being held between 750ms and 5s
# For a longer hold, see kauf-plug-update.yaml in the config-update directory.
# You have to start a time in the on_press script and cancel the timer in the on_release script.
# or if you wanted to require release, then start a counter on press and check the value on release.
# If you want to have a hold action, you probably want to toggle on release_quick instead of on_press so that
# you can perform the hold action without toggling the plug's relay.
# substitutions for power monitoring calibration. Allows end users to change calibration in their yaml and still
# incorporate this file as a package to get all the updates we release.
current_resistor_val: "0.001"
voltage_divider_val: "2401"
power_cal_val1_in: "0.0"
power_cal_val1_out: "0.0"
power_cal_val2_in: "333.8"
power_cal_val2_out: "60"
current_cal_val1_in: "0.0"
current_cal_val1_out: "0.0"
current_cal_val2_in: "0.6"
current_cal_val2_out: "0.515"
voltage_cal_val1_in: "0.0"
voltage_cal_val1_out: "0.0"
voltage_cal_val2_in: "302.1"
voltage_cal_val2_out: "117.1"
# set power monitoring mode in yaml https://esphome.io/components/sensor/hlw8012.html#configuration-variables
sub_change_mode_every: "1"
sub_update_interval: 10s
sub_initial_mode: CURRENT
esp8266: # https://esphome.io/components/esp8266.html
board: esp01_1m
restore_from_flash: true
preferences:
flash_write_interval: 3s
esphome:
name: $name
project:
name: "Kauf.PLF10"
version: "1.90(l)"
on_boot:
priority: 700
then:
# priority 700 ensures power monitoring mode variables are changed
# in this script before HLW component is setup
- script.execute: script_set_monitor_mode
wifi:
# **** ENTER WI-FI CREDENTIALS HERE, USING SECRETS.YAML RECOMMENDED ****
ssid: initial_ap # !secret wifi_ssid
password: asdfasdfasdfasdf # !secret wifi_password
# Uncomment below to set a static IP
# manual_ip:
# static_ip: !secret kauf_bulb_rgb_ip_address
# gateway: !secret wifi_gateway
# subnet: !secret wifi_subnet
# dns1: !secret wifi_dns1
# use_address allows wireless programming through dashboard.
# Set to the bulb's IP Address. Remove after programming.
# use_address: 192.168.86.244
# default is 20, 17 is recommended.
output_power: 17
# using fast_connect as default since it is required for hidden networks.
fast_connect: true
logger: # Enable logging
# baud_rate: 0 # Disable UART logging since TX pad not easily available
api: # Enable Home Assistant API
id: kauf_api
# password: !secret api_password # optional password field for Home Assistant API.
ota:
# password: !secret ota_password # optional password for OTA updates.
on_error:
then:
- button.press: restart_button
debug: # outputs additional debug info when logs start
web_server: # web server allows access to device with a web browser
local: true
# auth: # optional login details for web interface
# username: admin
# password: !secret web_server_password
# red led, blink when not connected to WiFi or Home Assistant
status_led:
pin:
number: GPIO0
inverted: true
binary_sensor:
# button input toggles relay and thereby blue led
- platform: gpio
id: button_in
name: $friendly_name Button
pin:
number: GPIO13
mode:
input: true
pullup: true
inverted: true
entity_category: ''
on_press:
then:
- script.execute: $sub_on_press
on_release:
then:
- script.execute: $sub_on_release
on_click:
- min_length: 20ms
max_length: 750ms
then:
- script.execute: $sub_on_release_quick
- min_length: 750ms
max_length: 5s
then:
- script.execute: $sub_on_release_short
# indicates whether plugged-in device is running based on configurable threshold.
- platform: template
id: in_use
name: ${friendly_name} Device In Use
script:
- id: script_toggle
then:
- if:
condition: # only toggle relay if button is enabled
lambda: return (id(select_button).state == "Enabled");
then:
switch.toggle: relay
- id: script_do_nothing
then:
- lambda: return;
- id: script_no_hass
then:
- delay: 1ms
- lambda: |-
if ( id(switch_no_hass).state ) {
id(kauf_api)->set_reboot_timeout(0);
id(kauf_api)->status_clear_warning();
}
else {
id(kauf_api)->set_reboot_timeout(900000);
}
- id: script_set_monitor_mode
then:
- lambda: |-
if ( id(select_monitor_mode).state == "10s P / 40s V,I") {
id(hlw_main)->set_update_interval(10000);
id(hlw_main)->set_change_mode_every(1);
} else if ( id(select_monitor_mode).state == "10s P,I Only" ) {
id(hlw_main)->set_update_interval(10000);
id(hlw_main)->set_change_mode_every(4294967295);
id(hlw_main)->set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_CURRENT);
} else if ( id(select_monitor_mode).state == "10s P,V Only" ) {
id(hlw_main)->set_update_interval(10000);
id(hlw_main)->set_change_mode_every(4294967295);
id(hlw_main)->set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_VOLTAGE);
} else if ( id(select_monitor_mode).state == " 2s P,I Only" ) {
id(hlw_main)->set_update_interval(2000);
id(hlw_main)->set_change_mode_every(4294967295);
id(hlw_main)->set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_CURRENT);
} else if ( id(select_monitor_mode).state == " 2s P,V Only" ) {
id(hlw_main)->set_update_interval(2000);
id(hlw_main)->set_change_mode_every(4294967295);
id(hlw_main)->set_initial_mode(hlw8012::HLW8012_INITIAL_MODE_VOLTAGE);
}
output:
- platform: esp8266_pwm
id: blue_led_pwm
frequency: 1000 Hz
pin: GPIO2
inverted: true
light:
- platform: monochromatic
name: $friendly_name Blue LED
id: blue_led
output: blue_led_pwm
entity_category: config
default_transition_length: 0s
effects:
- flicker:
name: Flicker
alpha: 90%
intensity: 10%
switch:
# relay output
- platform: gpio
id: relay
name: $friendly_name
pin: GPIO4
entity_category: ''
restore_mode: $sub_restore_mode
# automatically make blue led equal relay state
# don't turn LED on or off if disabled.
on_turn_on:
- if:
condition: # only if blue LED enabled
lambda: return (id(select_led).state == "Enabled");
then:
light.turn_on: blue_led
- if:
condition: # only if blue LED enabled
lambda: return (id(select_led).state == "Inverted");
then:
light.turn_off: blue_led
on_turn_off:
- if:
condition: # only if blue LED enabled
lambda: return (id(select_led).state == "Enabled");
then:
light.turn_off: blue_led
- if:
condition: # only if blue LED enabled
lambda: return (id(select_led).state == "Inverted");
then:
light.turn_on: blue_led
- platform: template
id: switch_no_hass
name: $friendly_name No HASS
optimistic: true
restore_state: true
entity_category: config
disabled_by_default: $disable_entities
icon: mdi:toggle-switch-off-outline
on_turn_on:
- script.execute: script_no_hass
on_turn_off:
- script.execute: script_no_hass
button:
- platform: restart
id: restart_button
name: $friendly_name Restart Firmware
entity_category: diagnostic
disabled_by_default: $disable_entities
# clock input from Home Assistant used to calculate total daily energy
time:
- platform: homeassistant
id: homeassistant_time
sensor: # Power monitoring sensors output to Home Assistant
- platform: hlw8012
id: hlw_main
sel_pin:
number: GPIO12
inverted: True
cf_pin: GPIO5
cf1_pin: GPIO14
current_resistor: $current_resistor_val # The value of the shunt resistor for current measurement.
voltage_divider: $voltage_divider_val # The value of the voltage divider on the board as (R_upstream + R_downstream) / R_downstream.
change_mode_every: $sub_change_mode_every
update_interval: $sub_update_interval
initial_mode: $sub_initial_mode
power:
name: ${friendly_name} Power
unit_of_measurement: W
id: wattage
filters:
- calibrate_linear:
- $power_cal_val1_in -> $power_cal_val1_out
- $power_cal_val2_in -> $power_cal_val2_out
- lambda: return x * id(scale_power).state/100.0f;
on_value: # set or clear in_use template binary sensor depending on whether power usage is over threshold
- if:
condition:
lambda: return (x >= id(threshold).state);
then:
- binary_sensor.template.publish:
id: in_use
state: ON
else:
- binary_sensor.template.publish:
id: in_use
state: OFF
current:
name: ${friendly_name} Current
unit_of_measurement: A
id: current
filters:
- calibrate_linear:
- $current_cal_val1_in -> $current_cal_val1_out
- $current_cal_val2_in -> $current_cal_val2_out
- lambda: return x * id(scale_current).state/100.0f;
voltage:
name: ${friendly_name} Voltage
unit_of_measurement: V
id: voltage
filters:
- calibrate_linear:
- $voltage_cal_val1_in -> $voltage_cal_val1_out
- $voltage_cal_val2_in -> $voltage_cal_val2_out
- lambda: return x * id(scale_voltage).state/100.0f;
# Reports the total Power so-far each day, resets at midnight
# See https://esphome.io/components/sensor/total_daily_energy.html
- platform: total_daily_energy
name: ${friendly_name} Total Daily Energy
power_id: wattage
filters:
- multiply: 0.001 ## convert Wh to kWh
unit_of_measurement: kWh
min_save_interval: 5min
- platform: uptime
name: $friendly_name Uptime
update_interval: 60s
entity_category: diagnostic
disabled_by_default: $disable_entities
number: # used as a threshold for whether the plugged-in devices is running.
- platform: template
name: ${friendly_name} Use Threshold
min_value: 1
max_value: 100
step: 1
initial_value: 3
id: threshold
entity_category: config
optimistic: true
restore_value: true
unit_of_measurement: Watt(s)
mode: box
disabled_by_default: $disable_entities
on_value:
- if: # set or clear in_use template binary sensor depending on whether power usage is above threshold
condition:
lambda: return (id(wattage).state >= x);
then:
- binary_sensor.template.publish:
id: in_use
state: ON
else:
- binary_sensor.template.publish:
id: in_use
state: OFF
- platform: template
name: ${friendly_name} Scale Power
min_value: 50
max_value: 200
step: .1
initial_value: 100
id: scale_power
entity_category: config
optimistic: true
restore_value: true
unit_of_measurement: "%"
mode: box
disabled_by_default: $disable_entities
on_value:
- lambda: id(wattage)->publish_state(id(wattage)->get_raw_state());
- platform: template
name: ${friendly_name} Scale Current
min_value: 50
max_value: 200
step: .1
initial_value: 100
id: scale_current
entity_category: config
optimistic: true
restore_value: true
unit_of_measurement: "%"
mode: box
disabled_by_default: $disable_entities
on_value:
- lambda: id(current)->publish_state(id(current)->get_raw_state());
- platform: template
name: ${friendly_name} Scale Voltage
min_value: 50
max_value: 200
step: .1
initial_value: 100
id: scale_voltage
entity_category: config
optimistic: true
restore_value: true
unit_of_measurement: "%"
mode: box
disabled_by_default: $disable_entities
on_value:
- lambda: id(voltage)->publish_state(id(voltage)->get_raw_state());
select:
# option to disable button
- platform: template
name: $friendly_name Button
id: select_button
optimistic: true
options:
- Enabled
- Disabled
initial_option: Enabled
restore_value: true
icon: mdi:circle-double
entity_category: config
# option to disable blue LED
- platform: template
name: $friendly_name LED
id: select_led
optimistic: true
entity_category: config
options:
- Enabled
- Disabled
- Inverted
initial_option: Enabled
restore_value: true
icon: mdi:led-on
on_value:
then: # changing to "disabled" will turn off LED, but then relay will not turn on or off LED.
- if: # when "Disabled", LED is initially turned off but then 100% controlled by light entity.
condition:
lambda: |-
if ( id(select_led).state == "Enabled" ) { return id(relay).state; }
else if ( id(select_led).state == "Inverted" ) { return !id(relay).state; }
else /* id(select_led).state == "Disabled" */ { return false; }
then:
light.turn_on: blue_led
else:
light.turn_off: blue_led
# change mode of power monitoring
- platform: template
name: $friendly_name Monitoring Mode
id: select_monitor_mode
optimistic: true
options:
- "10s P / 40s V,I"
- "10s P,I Only"
- "10s P,V Only"
- " 2s P,I Only"
- " 2s P,V Only"
- "YAML Configured"
initial_option: "10s P / 40s V,I"
restore_value: true
icon: mdi:wrench-clock
entity_category: config
disabled_by_default: $disable_entities
set_action:
- delay: 1s
- lambda: global_preferences->sync();
- delay: 1s
- button.press: restart_button
# Send IP Address to HA
text_sensor:
- platform: wifi_info
ip_address:
name: $friendly_name IP Address
disabled_by_default: $disable_entities
|