blob: f3fbfc00a8ffa20a6cc26fa722f009d011b3e504 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
|
substitutions:
# **** CHANGE FRIENDLY NAME TO SOMETHING UNIQUE PER DEVICE ****
friendly_name: Kauf Plug
esphome:
# **** CHANGE DEVICE NAME TO SOMETHING UNIQUE PER DEVICE ****
name: kauf-plug # **** RENAME YAML FILE TO SAME NAME ****
platform: ESP8266
board: esp01_1m
esp8266_restore_from_flash: true
# remove next line if renaming to something unique above
name_add_mac_suffix: true
project:
name: "kauf.plf10"
version: "1.5"
wifi:
ssid: initial_ap2
password: asdfasdfasdfasdf
# Uncomment below to set a static IP
# manual_ip:
# static_ip: !secret kauf_bulb_ip_address
# gateway: !secret wifi_gateway
# subnet: !secret wifi_subnet
# dns1: !secret wifi_dns1
# use_address allows wireless programming through dashboard. remove after programming.
# use_address: 192.168.1.3
# default is 20, 17 is recommended.
output_power: 17
ap:
ssid: ${friendly_name} Hotspot
ap_timeout: 10s
captive_portal: # for fallback wifi hotspot
logger: # Enable logging
# baud_rate: 0 # Disable UART logging since TX pad not easily available
api: # Enable Home Assistant API
# password: !secret api_password # optional password field for Home Assistant API.
ota:
# password: !secret ota_password # optional password for OTA updates.
debug: # outputs additional debug info when logs start
web_server: # web server allows access to device with a web browser
# auth: # optional login details for web interface
# username: admin
# password: !secret web_server_password
# red led, blink when not connected to wifi or Home Assistant
status_led:
pin:
number: GPIO0
inverted: true
binary_sensor:
# button input toggles relay and thereby blue led
- platform: gpio
id: button
pin:
number: GPIO13
mode: INPUT_PULLUP
inverted: true
on_press:
then:
- switch.toggle: relay
- platform: template
id: in_use
name: ${friendly_name} Device In Use
switch:
# blue LED follows relay power state
- platform: gpio
id: blue_led
pin:
number: GPIO2
inverted: true
# relay output
- platform: gpio
id: relay
name: $friendly_name
pin: GPIO4
# automatically make blue led equal relay state
on_turn_on:
- switch.turn_on: blue_led
on_turn_off:
- switch.turn_off: blue_led
# clock input from Home Assistant used for total daily energy
time:
- platform: homeassistant
id: homeassistant_time
sensor: # Power monitoring sensors output to Home Assistant
- platform: hlw8012
sel_pin:
number: GPIO12
inverted: True
cf_pin: GPIO5
cf1_pin: GPIO14
current_resistor: 0.001 # The value of the shunt resistor for current measurement.
voltage_divider: 2401 # The value of the voltage divider on the board as (R_upstream + R_downstream) / R_downstream.
power:
name: ${friendly_name} Power
unit_of_measurement: W
id: wattage
filters:
- calibrate_linear:
- 0.0 -> 0.0
- 333.8 -> 60 # value with 60W bulb.
on_value: # set or clear in_use template binary sensor depending on whether power usage is over threshold
- if:
condition:
lambda: 'return (x >= id(threshold).state);'
then:
- binary_sensor.template.publish:
id: in_use
state: ON
else:
- binary_sensor.template.publish:
id: in_use
state: OFF
current:
name: ${friendly_name} Current
unit_of_measurement: A
filters:
- calibrate_linear:
- 0.0 -> 0.0
- 0.6 -> 0.515 # value with 60W bulb.
voltage:
name: ${friendly_name} Voltage
unit_of_measurement: V
filters:
- calibrate_linear:
- 0.0 -> 0.0
- 302.1 -> 117.1 # Tested using a meter
change_mode_every: 1
update_interval: 10s # 20 second effective update rate for Power, 40 second for Current and Voltage.
# Reports the total Power so-far each day, resets at midnight, see https://esphome.io/components/sensor/total_daily_energy.html
- platform: total_daily_energy
name: ${friendly_name} Total Daily Energy
power_id: wattage
filters:
- multiply: 0.001 ## convert Wh to kWh
unit_of_measurement: kWh
number:
- platform: template
name: ${friendly_name} Use Threshold
min_value: 1
max_value: 100
step: 1
initial_value: 2
id: threshold
optimistic: true # required for changing value from home assistant
restore_value: true
on_value:
- if: # set or clear in_use template binary sensor depending on whether power usage is above threshold
condition:
lambda: 'return (id(wattage).state >= x);'
then:
- binary_sensor.template.publish:
id: in_use
state: ON
else:
- binary_sensor.template.publish:
id: in_use
state: OFF
# Send IP Address to HA
text_sensor:
- platform: wifi_info
ip_address:
name: $friendly_name IP Address
|
