path: root/kauf-plug.yaml

substitutions:

  name: kauf-plug              # **** CHANGE DEVICE NAME TO SOMETHING UNIQUE PER DEVICE.  RENAME YAML FILE TO SAME NAME.    ****
                               # **** USE DASHES (-) INSTEAD OF SPACES OR UNDERSCORE (_).  USE ONLY LOWER CASE LETTERS.     ****
  
  friendly_name: Kauf Plug     # **** CHANGE FRIENDLY NAME TO SOMETHING UNIQUE PER DEVICE ****


esp8266:                       # https://esphome.io/components/esp8266.html
  board: esp01_1m
  restore_from_flash: true


esphome:

  name: $name

  project:
    name: "kauf.plf10"
    version: "1.84y"

external_components:
  - source:
      type: git
      url: https://github.com/KaufHA/PLF10
    refresh: 0s
  # - source:
  #     type: local
  #     path: kauf_plf10_components
  - source:
      type: git
      url: https://github.com/KaufHA/common
    refresh: 0s

wifi:

  # **** ENTER WI-FI CREDENTIALS HERE, USING SECRETS.YAML RECOMMENDED ****
  ssid: initial_ap2 #!secret wifi_ssid
  password: asdfasdfasdfasdf # !secret wifi_password

  # Uncomment below to set a static IP
  # manual_ip:
  #   static_ip: !secret kauf_bulb_rgb_ip_address
  #   gateway: !secret wifi_gateway
  #   subnet: !secret wifi_subnet
  #   dns1: !secret wifi_dns1

  # use_address allows wireless programming through dashboard.
  # Set to the bulb's IP Address.  Remove after programming.
  # use_address: 192.168.86.244

  # default is 20, 17 is recommended.
  output_power: 17

  # using fast_connect as default since it is required for hidden networks.
  # feel free to change or override.
  fast_connect: true

  forced_hash: 1432266978


logger:                               # Enable logging
  # baud_rate: 0                      # Disable UART logging since TX pad not easily available

api:                                  # Enable Home Assistant API
  # password: !secret api_password    # optional password field for Home Assistant API.

ota:
  # password: !secret ota_password    # optional password for OTA updates.

debug:                                # outputs additional debug info when logs start

web_server:                           # web server allows access to device with a web browser
  # auth:                             # optional login details for web interface
  #   username: admin
  #   password: !secret web_server_password



# red led, blink when not connected to WiFi or Home Assistant
status_led:
    pin:
      number: GPIO0
      inverted: true

  
binary_sensor:  

    # button input toggles relay and thereby blue led
  - platform: gpio
    id: button_in
    name: $friendly_name Button
    pin:
      number: GPIO13
      mode: INPUT_PULLUP
      inverted: true
    entity_category: ''
    

    on_press:
        then:
          - if:
              condition: # only toggle relay if button is enabled
                lambda: 'return (id(select_button).state == "Enabled");'
              then:
                switch.toggle: relay


    # indicates whether plugged-in device is running based on configurable threshold.
  - platform: template
    id: in_use
    name: ${friendly_name} Device In Use



switch:    

    # blue LED follows relay power state
  - platform: gpio
    id: blue_led
    pin:
      number: GPIO2
      inverted: true

    # relay output
  - platform: gpio
    id: relay
    name: $friendly_name
    pin: GPIO4
    entity_category: ''
    forced_hash: 41191675
    
    # automatically make blue led equal relay state
    on_turn_on:
      - if:
          condition: # only if blue LED enabled
            lambda: 'return (id(select_led).state == "Enabled");'
          then:
            switch.turn_on: blue_led

    on_turn_off:
      - switch.turn_off: blue_led
    


button:
  - platform: restart
    id: restart_button
    name: $friendly_name Restart Firmware
    entity_category: diagnostic
    disabled_by_default: true


# clock input from Home Assistant used to calculate total daily energy
time:
  - platform: homeassistant
    id: homeassistant_time


sensor:   # Power monitoring sensors output to Home Assistant
  - platform: hlw8012
    sel_pin:
      number: GPIO12
      inverted: True
    cf_pin: GPIO5
    cf1_pin: GPIO14
    current_resistor: 0.001 # The value of the shunt resistor for current measurement. 
    voltage_divider: 2401   # The value of the voltage divider on the board as (R_upstream + R_downstream) / R_downstream. 
    power:
      name: ${friendly_name} Power
      unit_of_measurement: W
      id: wattage
      filters:
        - calibrate_linear:
            - 0.0 -> 0.0  
            - 333.8 -> 60 # value with 60W bulb.
      on_value:   # set or clear in_use template binary sensor depending on whether power usage is over threshold
        - if:
            condition:
              lambda: 'return (x >= id(threshold).state);'
            then:
              - binary_sensor.template.publish:
                  id: in_use
                  state: ON
            else:
              - binary_sensor.template.publish:
                  id: in_use
                  state: OFF
    current:
      name: ${friendly_name} Current
      unit_of_measurement: A
      filters:
        - calibrate_linear:
            - 0.0 -> 0.0
            - 0.6 -> 0.515  # value with 60W bulb.
    voltage:
      name: ${friendly_name} Voltage
      unit_of_measurement: V
      filters:
        - calibrate_linear:
            - 0.0 -> 0.0
            - 302.1 -> 117.1 # Tested using a meter
    change_mode_every: 1 
    update_interval: 10s # 20 second effective update rate for Power, 40 second for Current and Voltage.

# Reports the total Power so-far each day, resets at midnight
# See https://esphome.io/components/sensor/total_daily_energy.html
  - platform: total_daily_energy
    name: ${friendly_name} Total Daily Energy
    power_id: wattage
    filters:
        - multiply: 0.001  ## convert Wh to kWh
    unit_of_measurement: kWh
    forced_hash: 1903527169

number:      # used as a threshold for whether the plugged-in devices is running.
  - platform: template
    name: ${friendly_name} Use Threshold
    min_value: 1
    max_value: 100
    step: 1
    initial_value: 3
    id: threshold
    entity_category: config
    optimistic: true     # required for changing value from home assistant
    restore_value: true
    unit_of_measurement: Watt(s)
    mode: box
    forced_hash: 3932521563
    on_value:
      - if:               # set or clear in_use template binary sensor depending on whether power usage is above threshold
          condition:
            lambda: 'return (id(wattage).state >= x);'
          then:
            - binary_sensor.template.publish:
                id: in_use
                state: ON
          else:
            - binary_sensor.template.publish:
                id: in_use
                state: OFF


select:

    # option to disable button
  - platform: template
    name: $friendly_name Button
    id: select_button
    optimistic: true
    options:
      - Enabled
      - Disabled
    initial_option: Enabled
    restore_value: true
    icon: mdi:circle-double
    entity_category: config
    forced_hash: 3616613942

    # option to disable blue LED
  - platform: template
    name: $friendly_name LED
    id: select_led
    optimistic: true
    entity_category: config
    options:
      - Enabled
      - Disabled
    initial_option: Enabled
    restore_value: true
    icon: mdi:led-on
    forced_hash: 3104663617
    on_value:
      then:
      - if:
          condition:
            lambda: 'return ( (id(select_led).state == "Enabled") && id(relay).state );'
          then:
            switch.turn_on: blue_led
          else:
            switch.turn_off: blue_led


# Send IP Address to HA
text_sensor:
  - platform: wifi_info
    ip_address:
      name: $friendly_name IP Address
      disabled_by_default: true