V1.02 Add Thermometer Mode

4 files changed, 33 insertions, 18 deletions

diff --git a/workspace/ts100/.cproject b/workspace/ts100/.cproject
index e6af6223..331cce44 100644
--- a/workspace/ts100/.cproject
+++ b/workspace/ts100/.cproject
@@ -103,7 +103,7 @@
 				</extensions>
 			</storageModule>
 			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1113492345" name="Release" parent="fr.ac6.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary &quot;${BuildArtifactFileBaseName}.elf&quot; &quot;${BuildArtifactFileBaseName}.bin&quot;; arm-none-eabi-size -B &quot;${BuildArtifactFileName}&quot;">
+				<configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe,org.eclipse.cdt.build.core.buildType=org.eclipse.cdt.build.core.buildType.release" cleanCommand="rm -rf" description="" id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1113492345" name="Release" parent="fr.ac6.managedbuild.config.gnu.cross.exe.release" postannouncebuildStep="Generating binary and Printing size information:" postbuildStep="arm-none-eabi-objcopy -O binary &quot;${BuildArtifactFileBaseName}.elf&quot; &quot;${BuildArtifactFileBaseName}.bin&quot;; arm-none-eabi-size -B &quot;${BuildArtifactFileName}&quot;;arm-none-eabi-objcopy -O ihex &quot;${BuildArtifactFileBaseName}.elf&quot; &quot;${BuildArtifactFileBaseName}.hex&quot;">
 					<folderInfo id="fr.ac6.managedbuild.config.gnu.cross.exe.release.1113492345." name="/" resourcePath="">
 						<toolChain id="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release.668479481" name="Ac6 STM32 MCU GCC" superClass="fr.ac6.managedbuild.toolchain.gnu.cross.exe.release">
 							<option id="fr.ac6.managedbuild.option.gnu.cross.mcu.302274410" name="Mcu" superClass="fr.ac6.managedbuild.option.gnu.cross.mcu" value="STM32F103T8Ux" valueType="string"/>
diff --git a/workspace/ts100/inc/Modes.h b/workspace/ts100/inc/Modes.h
index 38a97211..9c44d5df 100644
--- a/workspace/ts100/inc/Modes.h
+++ b/workspace/ts100/inc/Modes.h
@@ -24,10 +24,11 @@ enum {
 	SLEEP,
 	COOLING,
 	UVLOWARN,
+	THERMOMETER,
 } operatingMode;
 
 enum {
-	UVCO = 0, SLEEP_TEMP, SLEEP_TIME, MOTIONDETECT, TEMPDISPLAY,LEFTY
+	UVCO = 0, SLEEP_TEMP, SLEEP_TIME, MOTIONDETECT, TEMPDISPLAY, LEFTY
 
 } settingsPage;
 
diff --git a/workspace/ts100/src/Main.c b/workspace/ts100/src/Main.c
index c898c3ab..377d921d 100644
--- a/workspace/ts100/src/Main.c
+++ b/workspace/ts100/src/Main.c
@@ -36,7 +36,7 @@ void setup() {
 	restoreSettings();					//Load settings

 	if (systemSettings.flipDisplay)

 		Oled_DisplayFlip();

-	OLED_DrawString("VER 1.01",8);

+	OLED_DrawString("VER 1.02",8);

 	delayMs(800);

 	Start_Watchdog(1000); 		//start the system watchdog as 1 seconds timeout

 }

diff --git a/workspace/ts100/src/Modes.c b/workspace/ts100/src/Modes.c
index b3f56a0d..7e93e981 100644
--- a/workspace/ts100/src/Modes.c
+++ b/workspace/ts100/src/Modes.c
@@ -16,12 +16,16 @@ void ProcessUI() {
 	switch (operatingMode) {
 	case STARTUP:
 		if ((millis() - getLastButtonPress() > 1000)) {
-			if (Buttons & BUT_A) {
+			if (Buttons == (BUT_A | BUT_B)) {
+				operatingMode = THERMOMETER;
+				resetLastButtonPress();
+				resetButtons();
+			} else if (Buttons == BUT_A) {
 				//A key pressed so we are moving to soldering mode
 				operatingMode = SOLDERING;
 				resetLastButtonPress();
 				resetButtons();
-			} else if (Buttons & BUT_B) {
+			} else if (Buttons == BUT_B) {
 				//B Button was pressed so we are moving to the Settings menu
 				operatingMode = SETTINGS;
 				resetLastButtonPress();
@@ -174,16 +178,11 @@ void ProcessUI() {
 			operatingMode = STARTUP;
 			resetLastButtonPress();
 			resetButtons();
-		} else { //we check if the user has pushed a button to ack
-			if ((millis() - getLastButtonPress() > 800)
-					&& (millis() - getLastButtonPress() < 5000)) {
-				if (getButtons() & (BUT_A | BUT_B)) {
-					//Either button was pushed
-					operatingMode = STARTUP;
-					resetLastButtonPress();
-					resetButtons();
-				}
-			}
+		} else if (Buttons & (BUT_A | BUT_B)) { //we check if the user has pushed a button to ack
+			//Either button was pushed
+			operatingMode = STARTUP;
+			resetLastButtonPress();
+			resetButtons();
 		}
 	}
 		break;
@@ -194,6 +193,17 @@ void ProcessUI() {
 			operatingMode = STARTUP;		//jump back to idle mode
 		}
 		break;
+	case THERMOMETER: {
+		//This lets the user check the tip temp without heating the iron.. And eventually calibration will be added here
+		if ((millis() - getLastButtonPress() > 1000))
+			if (Buttons == (BUT_A | BUT_B)) {
+				//If the user is holding both button, exit the temp screen
+				operatingMode = STARTUP;
+				resetLastButtonPress();
+				resetButtons();
+			}
+	}
+		break;
 	default:
 		break;
 	}
@@ -231,7 +241,7 @@ void DrawUI() {
 		if (getIronTimer() == 0) {
 			OLED_DrawChar('C', 5);
 		} else {
-			if (getIronTimer() < 500) {
+			if (getIronTimer() < 900) {
 				OLED_DrawChar(' ', 5);
 			} else {		//we are heating
 				OLED_DrawChar('H', 5);
@@ -302,16 +312,20 @@ void DrawUI() {
 		//The iron is in sleep temp mode
 		//Draw in temp and sleep
 		OLED_DrawString("SLP", 3);
-		drawTemp(temp, 3);
+		drawTemp(temp, 4);
 		break;
 	case COOLING:
 		//We are warning the user the tip is cooling
 		OLED_DrawString("COOL", 4);
-		drawTemp(temp, 4);
+		drawTemp(temp, 5);
 		break;
 	case UVLOWARN:
 		OLED_DrawString("LOW VOLT", 8);
 		break;
+	case THERMOMETER:
+		OLED_DrawString("TEMP ", 5);//extra one to it clears the leftover 'L' from IDLE
+		drawTemp(temp, 5);
+		break;
 	default:
 		break;
 	}