aboutsummaryrefslogtreecommitdiffhomepage
diff options
context:
space:
mode:
authorBen V. Brown <[email protected]>2017-01-23 19:45:23 +1100
committerBen V. Brown <[email protected]>2017-01-23 19:45:23 +1100
commitc3d8d246dc7e11c105a191b85138b495b037a8e9 (patch)
tree4e139e4c8eb7803cc9a505d01d0159744d3a5425
parent1f7cdf9694d2e836dc973b6f8c01932a51a4c391 (diff)
downloadIronOS-c3d8d246dc7e11c105a191b85138b495b037a8e9.tar.gz
IronOS-c3d8d246dc7e11c105a191b85138b495b037a8e9.zip
Update readme
-rw-r--r--README.md9
-rw-r--r--TS100.pngbin0 -> 82801 bytes
2 files changed, 8 insertions, 1 deletions
diff --git a/README.md b/README.md
index d658bd14..0a45ad8b 100644
--- a/README.md
+++ b/README.md
@@ -31,8 +31,15 @@ This is completely safe, if it goes wrong just put the .hex file from the offici
6. If it ends with .RDY your done! Otherwise something went wrong.
7. If it went wrong try on a windows computer, some Mac / Linux machines do not play well with their boot loader.
+There is also a complete device flash backup included in this repository. (Note this includes the bootloader, so will need a SWD programmer to load onto the unit).
# New Menu System
This new firmware uses a new menu system to allow access to the settings on the device.
This menu can be accessed as shown in following flow chart, in the settings numbers roll over from top to bottom.
-![TS100: Software Menu](http://ralimtek.com/images/TS100.png "Fairly easy to learn")
+![TS100: Software Menu](TS100.png "Fairly easy to learn")
+
+
+# Version Changes:
+V1.02
+ - Adds hold both buttons on IDLE to access the therometer mode.
+ - Changes the exit soldering mode to be holding both buttons (Like original firmware). \ No newline at end of file
diff --git a/TS100.png b/TS100.png
new file mode 100644
index 00000000..00b8fcb0
--- /dev/null
+++ b/TS100.png
Binary files differ