aboutsummaryrefslogtreecommitdiffhomepage
diff options
context:
space:
mode:
authorRockman18 <[email protected]>2017-12-16 12:36:17 +0100
committerBen V. Brown <[email protected]>2017-12-16 22:36:16 +1100
commitf01a2d35051bde702bfa2b53b1dc10c49eae87bd (patch)
tree9d6e90d65f3faf3aabf0f9af8c0f4aa68f47349e
parent549c5aa6b9499a2c737f9ada887f54b20289ed1a (diff)
downloadIronOS-f01a2d35051bde702bfa2b53b1dc10c49eae87bd.tar.gz
IronOS-f01a2d35051bde702bfa2b53b1dc10c49eae87bd.zip
French Translation - Double Line Mode (#161)
-rw-r--r--workspace/TS100/src/Translation.c80
1 files changed, 40 insertions, 40 deletions
diff --git a/workspace/TS100/src/Translation.c b/workspace/TS100/src/Translation.c
index a045f327..6ff2812f 100644
--- a/workspace/TS100/src/Translation.c
+++ b/workspace/TS100/src/Translation.c
@@ -355,56 +355,56 @@ const char* SettingsShortNames[16][2] = {
const char* SettingsLongNames[16] = {
// These are all the help text for all the settings.
// No requirements on spacing or length.
- /* Power source (DC or batt) */"Type d\'alimentation. Regle la tension de coupure. <DC=10V S=3.3V par cellules>",
- /* Sleep temperature */"Temperature en veille. <C>",
- /* Sleep timeout */"Temps avant mise en veille. <Minutes>",
- /* Shutdown timeout */"Temps avant extinction. <Minutes>",
- /* Motion sensitivity level */"Sensibilitee du capteur de mouvement. <0=Inactif 1=Peu sensible 9=Tres sensible>",
- /* Temperature in F and C */"Unitee de temperature.",
- /* Advanced idle display mode enabled */"Afficher des informations detaillees en petit lors de la veille",
- /* Display rotation mode */"Orientation de l\'affichage. <A=Automatique G=Gaucher D=Droitier>",
- /* Boost enabled */"Active le mode \"Boost\" 450C sur le bouton de devant pendant la soudure.",
- /* Boost temperature */"Temperature du mode \"Boost\". <C>",
- /* Automatic start mode */"Demarre automatiquement la soudure a l\'allumage. <A=Active, V=Mode Veille, D=Desactive>",
- /* Cooldown blink */"Fait clignotter la temperature lors du refroidissement pendant que la panne est chaude."
- /* Temperature calibration enter menu */"Compenser l\'erreur de la panne",
- /* Settings reset command */"Reinitialiser tout les reglages",
- /* Calibrate input voltage */"Calibration VIN. Boutons pour ajuster, appui long pour quitter",
- /* Advanced soldering screen enabled */"Afficher des informations detaillees pendant la soudure",
+ /* Power source (DC or batt) */"Source d'alimentation. Règle la tension de coupure <DC=10V S=3.3V par cellules>",
+ /* Sleep temperature */"Température en veille <C>",
+ /* Sleep timeout */"Délai avant mise en veille <Minutes>",
+ /* Shutdown timeout */"Délai avant extinction <Minutes>",
+ /* Motion sensitivity level */"Sensibilité du capteur de mouvement <0=Inactif 1=Peu sensible 9=Tres sensible>",
+ /* Temperature in F and C */"Unité de temperature",
+ /* Advanced idle display mode enabled */"Afficher des informations détaillées lors de la veille",
+ /* Display rotation mode */"Orientation de l'affichage <A=Automatique G=Gaucher D=Droitier>",
+ /* Boost enabled */"Activer le mode \"Boost\" en maintenant le bouton de devant pendant la soudure",
+ /* Boost temperature */"Température du mode \"Boost\" <C>",
+ /* Automatic start mode */"Démarrer automatiquement la soudure a l'allumage <A=Activé, V=Mode Veille, D=Désactivé>",
+ /* Cooldown blink */"Faire clignoter la température lors du refroidissement tant que la panne est chaude"
+ /* Temperature calibration enter menu */"Etalonner température de la panne",
+ /* Settings reset command */"Réinitialiser tous les réglages",
+ /* Calibrate input voltage */"Etalonner tension d'entrée. Boutons pour ajuster, appui long pour quitter",
+ /* Advanced soldering screen enabled */"Afficher des informations détaillées pendant la soudure",
};
-const char* SettingsCalibrationWarning = "Please ensure the tip is at room temperature before continuing!";
-const char* SettingsResetWarning = "Are you sure to reset settings to default values?";
+const char* SettingsCalibrationWarning = "Assurez-vous que la panne est à température ambiante avant de continuer!";
+const char* SettingsResetWarning = "Voulez-vous vraiment réinitialiser les paramètres aux valeurs d'usine?";
const char* UVLOWarningString = "LOW VOLT"; // Fixed width 8 chars
const char* SleepingSimpleString = "Zzzz"; // Must be <= 4 chars
-const char* SleepingAdvancedString = "Sleeping..."; // <=17 chars
+const char* SleepingAdvancedString = "En veille..."; // <=17 chars
const char* WarningSimpleString = "HOT!"; // Must be <= 4 chars
-const char* WarningAdvancedString = "WARNING! TIP HOT!";
+const char* WarningAdvancedString = "ATTENTION! PANNE CHAUDE!";
-const char SettingTrueChar = 'T';
+const char SettingTrueChar = 'V';
const char SettingFalseChar = 'F';
-const char SettingRightChar = 'R';
-const char SettingLeftChar = 'L';
+const char SettingRightChar = 'D';
+const char SettingLeftChar = 'G';
const char SettingAutoChar = 'A';
-const enum ShortNameType SettingsShortNameType = SHORT_NAME_SINGLE_LINE;
+const enum ShortNameType SettingsShortNameType = SHORT_NAME_DOUBLE_LINE;
const char* SettingsShortNames[16][2] = {
- /* (<= 5) Power source (DC or batt) */ {"PWRSC"},
- /* (<= 4) Sleep temperature */ {"STMP"},
- /* (<= 4) Sleep timeout */ {"STME"},
- /* (<= 5) Shutdown timeout */ {"SHTME"},
- /* (<= 6) Motion sensitivity level */ {"MSENSE"},
- /* (<= 6) Temperature in F and C */ {"TMPUNT"},
- /* (<= 6) Advanced idle display mode enabled */ {"ADVIDL"},
- /* (<= 6) Display rotation mode */ {"DSPROT"},
- /* (<= 6) Boost enabled */ {"BOOST"},
- /* (<= 4) Boost temperature */ {"BTMP"},
- /* (<= 6) Automatic start mode */ {"ASTART"},
- /* (<= 6) Cooldown blink */ {"CLBLNK"},
- /* (<= 8) Temperature calibration enter menu */ {"TMP CAL?"},
- /* (<= 8) Settings reset command */ {"RESET?"},
- /* (<= 8) Calibrate input voltage */ {"CAL VIN?"},
- /* (<= 6) Advanced soldering screen enabled */ {"ADVSLD"},
+ /* (<= 11) Power source (DC or batt) */ {"Source", "d'alim"},
+ /* (<= 9) Sleep temperature */ {"Temp.", "veille"},
+ /* (<= 9) Sleep timeout */ {"Délai", "veille"},
+ /* (<= 11) Shutdown timeout */ {"Délai", "extinction"},
+ /* (<= 13) Motion sensitivity level */ {"Sensibilité", "au mouvement"},
+ /* (<= 13) Temperature in F and C */ {"Unité de", "température"},
+ /* (<= 13) Advanced idle display mode enabled */ {"Ecran veille", "détaillé"},
+ /* (<= 13) Display rotation mode */ {"Orientation", "de l'écran"},
+ /* (<= 13) Boost enabled */ {"Activation du", "mode Boost"},
+ /* (<= 9) Boost temperature */ {"Temp.", "Boost"},
+ /* (<= 13) Automatic start mode */ {"Démarrage", "automatique"},
+ /* (<= 13) Cooldown blink */ {"Refroidir en", "clignottant"},
+ /* (<= 16) Temperature calibration enter menu */ {"Etalonner", "température"},
+ /* (<= 16) Settings reset command */ {"Réinitialisation", "d'usine"},
+ /* (<= 16) Calibrate input voltage */ {"Etalonner", "tension d'entrée"},
+ /* (<= 13) Advanced soldering screen enabled */ {"Ecran soudure", "détaillé"},
};
#endif