Merge pull request #1072 from alvinhochun/alvin/translations-zh-update

Update Chinese translations

3 files changed, 24 insertions, 43 deletions

diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json
index e7c9c1a5..d5b8ed78 100644
--- a/Translations/translation_YUE_HK.json
+++ b/Translations/translation_YUE_HK.json
@@ -4,25 +4,19 @@
   "fonts": ["ascii_basic", "cjk"],

   "tempUnitFahrenheit": true,

   "messages": {

-    "SettingsCalibrationDone": "校正完成！",

     "SettingsCalibrationWarning": "開始温度校正之前，請先確定辣雞咀係處於室温！",

     "SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？",

     "UVLOWarningString": "電壓過低",

     "UndervoltageString": "Undervoltage",

     "InputVoltageString": "Input V: ",

-    "WarningTipTempString": "Tip temp: ",

-    "BadTipString": "BAD TIP",

     "SleepingSimpleString": "Zzzz",

     "SleepingAdvancedString": "Sleeping...",

-    "WarningSimpleString": "HOT!",

-    "WarningAdvancedString": "!!! HOT TIP !!!",

     "SleepingTipAdvancedString": "Tip:",

     "IdleTipString": "Tip:",

     "IdleSetString": " Set:",

     "TipDisconnectedString": "NO TIP",

     "SolderingAdvancedPowerPrompt": "Power: ",

-    "OffString": "關",

-    "YourGainMessage": "Your gain:"

+    "OffString": "關"

   },

   "messagesWarn": {

     "ResetOKMessage": "已重設！",

@@ -32,7 +26,7 @@
     "LockingKeysString": "已鎖定",

     "UnlockingKeysString": "已解除鎖定",

     "WarningKeysLockedString": "!撳掣鎖定!",

-    "WarningThermalRunaway": ["Thermal", "Runaway"]

+    "WarningThermalRunaway": "加熱失控"

   },

   "characters": {

     "SettingRightChar": "右",

@@ -147,8 +141,8 @@
       "desc": "使用QC電源時請求嘅最高目標電壓"

     },

     "PDNegTimeout": {

-      "text2": ["PD", "timeout"],

-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"

+      "text2": "PD逾時",

+      "desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"

     },

     "PowerLimit": {

       "text2": "功率限制",

@@ -203,12 +197,12 @@
       "desc": ""

     },

     "Brightness": {

-      "text2": ["Screen", "Brightness"],

-      "desc": "Adjust the contrast/brightness of the OLED screen"

+      "text2": "熒幕亮度",

+      "desc": "設定OLED熒幕嘅亮度"

     },

     "ColourInversion": {

-      "text2": ["Screen", "Invert"],

-      "desc": "Invert the colours of the OLED screen"

+      "text2": "熒幕反轉色",

+      "desc": "反轉OLED熒幕嘅黑白色"

     }

   }

 }

diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json
index 022a08d4..18a6527a 100644
--- a/Translations/translation_ZH_CN.json
+++ b/Translations/translation_ZH_CN.json
@@ -4,25 +4,19 @@
   "fonts": ["ascii_basic", "cjk"],

   "tempUnitFahrenheit": true,

   "messages": {

-    "SettingsCalibrationDone": "校正完成！",

     "SettingsCalibrationWarning": "开始温度校正前，请先确定铬铁头正处于室温！",

     "SettingsResetWarning": "你是否确定要将全部设置重置为默认值？",

     "UVLOWarningString": "电压过低",

     "UndervoltageString": "Undervoltage",

     "InputVoltageString": "Input V: ",

-    "WarningTipTempString": "Tip temp: ",

-    "BadTipString": "BAD TIP",

     "SleepingSimpleString": "Zzzz",

     "SleepingAdvancedString": "Sleeping...",

-    "WarningSimpleString": "HOT!",

-    "WarningAdvancedString": "!!! HOT TIP !!!",

     "SleepingTipAdvancedString": "Tip:",

     "IdleTipString": "Tip:",

     "IdleSetString": " Set:",

     "TipDisconnectedString": "NO TIP",

     "SolderingAdvancedPowerPrompt": "Power: ",

-    "OffString": "关",

-    "YourGainMessage": "Your gain:"

+    "OffString": "关"

   },

   "messagesWarn": {

     "ResetOKMessage": "已重置！",

@@ -32,7 +26,7 @@
     "LockingKeysString": "已锁定",

     "UnlockingKeysString": "已解除锁定",

     "WarningKeysLockedString": "!按键锁定!",

-    "WarningThermalRunaway": ["Thermal", "Runaway"]

+    "WarningThermalRunaway": "加热失控"

   },

   "characters": {

     "SettingRightChar": "右",

@@ -147,8 +141,8 @@
       "desc": "使用QC电源时请求的最高目标电压"

     },

     "PDNegTimeout": {

-      "text2": ["PD", "timeout"],

-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"

+      "text2": "PD超时",

+      "desc": "设定USB PD协议交涉的超时时限；为兼容某些QC电源而设 <x100ms（亳秒）>"

     },

     "PowerLimit": {

       "text2": "功率限制",

@@ -203,12 +197,12 @@
       "desc": ""

     },

     "Brightness": {

-      "text2": ["Screen", "Brightness"],

-      "desc": "Adjust the contrast/brightness of the OLED screen"

+      "text2": "屏幕亮度",

+      "desc": "设定OLED屏幕的亮度"

     },

     "ColourInversion": {

-      "text2": ["Screen", "Invert"],

-      "desc": "Invert the colours of the OLED screen"

+      "text2": "螢幕反轉色",

+      "desc": "反转OLED屏幕的黑白色彩"

     }

   }

 }

diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json
index cdb013ff..34727748 100644
--- a/Translations/translation_ZH_TW.json
+++ b/Translations/translation_ZH_TW.json
@@ -4,25 +4,19 @@
   "fonts": ["ascii_basic", "cjk"],

   "tempUnitFahrenheit": true,

   "messages": {

-    "SettingsCalibrationDone": "校正完成！",

     "SettingsCalibrationWarning": "開始溫度校正前，請先確定鉻鐵頭正處於室溫！",

     "SettingsResetWarning": "你是否確定要將全部設定重設到預設值？",

     "UVLOWarningString": "電壓過低",

     "UndervoltageString": "Undervoltage",

     "InputVoltageString": "Input V: ",

-    "WarningTipTempString": "Tip temp: ",

-    "BadTipString": "BAD TIP",

     "SleepingSimpleString": "Zzzz",

     "SleepingAdvancedString": "Sleeping...",

-    "WarningSimpleString": "HOT!",

-    "WarningAdvancedString": "!!! HOT TIP !!!",

     "SleepingTipAdvancedString": "Tip:",

     "IdleTipString": "Tip:",

     "IdleSetString": " Set:",

     "TipDisconnectedString": "NO TIP",

     "SolderingAdvancedPowerPrompt": "Power: ",

-    "OffString": "關",

-    "YourGainMessage": "Your gain:"

+    "OffString": "關"

   },

   "messagesWarn": {

     "ResetOKMessage": "已重設！",

@@ -32,8 +26,7 @@
     "LockingKeysString": "已鎖定",

     "UnlockingKeysString": "已解除鎖定",

     "WarningKeysLockedString": "!按鍵鎖定!",

-    "WarningThermalRunaway": ["Thermal", "Runaway"],

-    "WarningThermalRunaway": ["Thermal", "Runaway"]

+    "WarningThermalRunaway": "加熱失控"

   },

   "characters": {

     "SettingRightChar": "右",

@@ -148,8 +141,8 @@
       "desc": "使用QC電源時請求的最高目標電壓"

     },

     "PDNegTimeout": {

-      "text2": ["PD", "timeout"],

-      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"

+      "text2": "PD逾時",

+      "desc": "設定USB PD協定交涉的逾時時限；為兼容某些QC電源而設 <x100ms（亳秒）>"

     },

     "PowerLimit": {

       "text2": "功率限制",

@@ -204,12 +197,12 @@
       "desc": ""

     },

     "Brightness": {

-      "text2": ["Screen", "Brightness"],

-      "desc": "Adjust the contrast/brightness of the OLED screen"

+      "text2": "螢幕亮度",

+      "desc": "設定OLED螢幕的亮度"

     },

     "ColourInversion": {

-      "text2": ["Screen", "Invert"],

-      "desc": "Invert the colours of the OLED screen"

+      "text2": "螢幕反轉色",

+      "desc": "反轉OLED螢幕的黑白色彩"

     }

   }

 }