Merge branch 'dev' into discip-patch-2

3 files changed, 102 insertions, 61 deletions

diff --git a/Documentation/History.md b/Documentation/History.md
index af4f753f..f638b73e 100644
--- a/Documentation/History.md
+++ b/Documentation/History.md
@@ -1,6 +1,8 @@
 # Version Changes
 
-## V2.19
+
+# V2.19
+
 - Bug-fix Infinite Boot Logo
 - Shutdown settings for MHP30
 - Accelerometer sensitivity for MHP30
@@ -9,7 +11,9 @@
 - Updated translations
 - Improved documents, added features table
 
-## V2.18
+
+# V2.18
+
 - Support for animated bootup logo's
 - Bootup logo's moved to their own IronOS-Meta repo
 - New Vietnamese translation (limited due to screen size)
@@ -17,8 +21,11 @@
 - Updated translations
 - Better Instructions/documents
 
-## V2.17
+
+# V2.17
+
 ### Big changes
+
 - Indicate status of VBus for modding Pinecil (debug menu)
 - Better hall effect sensor sensitivity adjustment (larger range with more steps)
 - Temperature increment will "round" to nearest multiple of increase amount
@@ -32,7 +39,9 @@
 - Fixed automatic orientation for newer TS80P's with the SC7 accelerometer
 - User interface slight changes
 - New `metadata.zip` file to allow the Pine Updater to automatically fetch information on releases
+
 ### Notes
+
 - VBus mod detection may not play well with all PPS chargers. If your iron reboots when you view this in the debug menu its not a fault. ([#1226](https://github.com/Ralim/IronOS/issues/1226))
 - `metadata.zip` is only designed for use by automatic software, ignore it for normal use
 - More details on Pinecil VBus mod coming via other channels.
@@ -41,39 +50,38 @@
 - -> Release has been updated to build `e065be3` after one bug with the BMA223 was found.
 
 
-## V2.16
+# V2.16
 
-* Overhaul of the Timer+ADC setup with help from @sandmanRO
-* Overhaul of the PID with help from @sandmanRO
-* Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
-* Shows error if tip runaway (failed temperature sensor) is detected
-* USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
-* QC3 Voltages are now adjustable to user desired setpoint
-* Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
-* * Please note: Doing this is entirely at your own risk!
-* New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
-* OLED brightness and contrast thanks to @alvinhochun
-* Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
-* Moved to `.dfu` files from `.bin` to make flashing commands easier
-* Every language had translation updates I believe
-* Romanian language added
+- Overhaul of the Timer+ADC setup with help from @sandmanRO
+- Overhaul of the PID with help from @sandmanRO
+- Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings
+- Shows error if tip runaway (failed temperature sensor) is detected
+- USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster
+- QC3 Voltages are now adjustable to user desired setpoint
+- Added a small tolerance to allow "overvoltage" on QC3 above unit specifications.
+    - Please note: Doing this is entirely at your own risk!
+- New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior
+- OLED brightness and contrast thanks to @alvinhochun
+- Scrollbar is fixed so it doesnt jump around when menus are shown/hidden
+- Moved to `.dfu` files from `.bin` to make flashing commands easier
+- Every language had translation updates I believe
+- Romanian language added
 
 
-## V2.15
+# V2.15
 
+### Feature upgrades:
 
-## Feature upgrades:
+- MHP30 support
+- Multi-lingual firmware combinations now exist for Pinecil
+- More fine grained voltage controlled options
+- USB-PD improvements (version one and two)
+- More configuration options for power pulse
+- All font / character encoding has been very reworked
+- More translation updates than one can count 
+- More languages 😱 
 
-* MHP30 support
-* Multi-lingual firmware combinations now exist for Pinecil
-* More fine grained voltage controlled options
-* USB-PD improvements (version one and two)
-* More configuration options for power pulse
-* All font / character encoding has been very reworked
-* More translation updates than one can count 
-* More languages 😱 
-
-### MHP30
+### MHP30 support
 
 The MHP30 is a small reflow station from Miniware.
 Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit.
@@ -84,7 +92,8 @@ Programs the same as any one Miniware unit using drag and drop.
 
 The flood doors are now open for feature requests for this unit :)
 
-## V2.14
+
+# V2.14
 
 - Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P
 - Adds support for two new accelerometers
@@ -101,7 +110,8 @@ The flood doors are now open for feature requests for this unit :)
 - Cleanup the folder name of the source code #800
 - clang-format spec setup #801
 
-## V2.13
+
+# V2.13
 
 - First _official_ Pinecil release
 - All of the wire for Pinecil releases added
@@ -118,7 +128,8 @@ The flood doors are now open for feature requests for this unit :)
 - Fixed bug with accelerometer model on Pinecil
 - Rework of all of the temperature curves for better accuracy
 
-## V2.12
+
+# V2.12
 
 - Only released as pre-release
 - [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly
@@ -126,36 +137,42 @@ The flood doors are now open for feature requests for this unit :)
 - Clean up the menu (removed both enables and settings, so that you can turn things off easier)
 - Removing the very old single line menu style.
 
-## V2.11
+
+# V2.11
 
 - First TS80P support
 - Added in a USB-PD driver stack for the FUSB302
 - Fixed some graphical glitches
 
-## V2.10
+
+# V2.10
 
 - GUI polish (animations and scroll bars)
 - Power pulse to keep power supplies alive
 - Adjustable tip response gain
 
-## V2.09
+
+# V2.09
 
 - Adjustable steps in temperature adjustment
 - Git hash now in build string
 - Adjustable language to set if US units are available or not
 - Some minor QC3 improvements
 
-## V2.08
+
+# V2.08
 
 - Fixes auto start in sleep mode
 - Power limiters
 
-## V2.07
+
+# V2.07
 
 - QC fixes
 - Cosmetic fixes for leading 0's
 
-## V2.06
+
+# V2.06
 
 - Warning on settings reset
 - Temp temp re-write
@@ -163,27 +180,33 @@ The flood doors are now open for feature requests for this unit :)
 - Hide some leading 0's
 - Menu timeouts
 
-## V2.05
+
+# V2.05
 
 - Language updates
 
-## V2.04
+
+# V2.04
 
 - GUI updates
 
-## V2.03
+
+# V2.03
 
 - Support for new accelerometers
 
-## V2.02
+
+# V2.02
 
 - Adds small font
 
-## V2.01
+
+# V2.01
 
 - Newer settings menu
 
-## V2.00
+
+# V2.00
 
 - Complete re-write of the low layer system to use the STM32 HAL for easier development
 - This allowed easier setup for the new ADC auto measuring system
@@ -193,80 +216,96 @@ The flood doors are now open for feature requests for this unit :)
 - Added detailed screen views
 - Added smaller font for said screen views
 
-## V1.17
+
+# V1.17
 
 - Added blinking cooldown display
 - Allowed smaller sleep timeout values
 - New font!
 - Automatic startup option
 
-## V1.16
+
+# V1.16
 
 - Added automatic rotation support
 - Added power display graph
 
-## V1.15
+
+# V1.15
 
 - Added support for a custom bootup logo to be programmed via the DFU bootloader
 
-## V1.14
+
+# V1.14
 
 - Changed input voltage cutoff to be based on cell count rather than voltage
 
-## V1.13
+
+# V1.13
 
 - Swapped buttons for menu to prevent accidentally changing first menu item
 - Added auto key repeat
 
-## V1.12
+
+# V1.12
 
 - Increases sensitivity options to be 1\*9 with 0 off state
 - Fixes issue where going from COOL \*> soldering can leave screen off
 
-## V1.11
+
+# V1.11
 
 - Boost mode
 - Change sensitivity options to be 1\*8
 
-## V1.10
+
+# V1.10
 
 - Adds help text to settings
 - Improves settings for the display update rate
 
-## V1.09
+
+# V1.09
 
 - Adds display modes, for slowing down or simplifying the display
 
-## V1.08
+
+# V1.08
 
 - Fix settings menu not showing flip display
 
-## V1.07
+
+# V1.07
 
 - Adds shutdown time to automatically shutdown the iron after inactivity
 
-## V1.06
+
+# V1.06
 
 - Changes H and C when the iron is heating to the minidso chevron like images
 
-## V1.05
+
+# V1.05
 
 - Adds ability to calibrate the input voltage measurement
 
-## V1.04
+
+# V1.04
 
 - Increased accuracy of the temperature control
 - Improved PID response slightly
 - Allows temperature offset calibration
 - Nicer idle screen
 
-## V1.03
+
+# V1.03
 
 - Improved Button handling
 - Ability to set motion sensitivity
 - DC voltmeter page shows input voltage
 
-## V1.02
+
+# V1.02
 
 - Adds hold both buttons on IDLE to access the therometer mode
 - Changes the exit soldering mode to be holding both buttons (Like original firmware)
diff --git a/Documentation/README.md b/Documentation/README.md
index d809a45b..85f51d43 100644
--- a/Documentation/README.md
+++ b/Documentation/README.md
@@ -29,3 +29,4 @@
       - [Power sources](../Documentation/PowerSources.md)
   - [Translations](../Documentation/Translation.md)
   - [Development](../Documentation/Development.md)
+  - [Changelog](../Documentation/History.md)
diff --git a/scripts/IronOS-mkdocs.yml b/scripts/IronOS-mkdocs.yml
index 46d883fb..cb41061c 100644
--- a/scripts/IronOS-mkdocs.yml
+++ b/scripts/IronOS-mkdocs.yml
@@ -43,6 +43,7 @@ nav:
       - Power sources: PowerSources.md
   - Translations: Translation.md
   - Development: Development.md
+  - Changelog: History.md
 
 # Plugins
 plugins: