Deployed 5ea78360 with MkDocs version: 1.3.1

1 files changed, 1 insertions, 1 deletions

diff --git a/HallSensor/index.html b/HallSensor/index.html
index 6516e45b..68ebfb81 100644
--- a/HallSensor/index.html
+++ b/HallSensor/index.html
@@ -131,7 +131,7 @@
 <p>In Sleep mode, the iron automatically lowers the temperature to 150 °C (default). This default was chosen as it is just below the melting point of many solders. A stand-by lower temperature helps reduce the rate of oxidation and prevents damage to iron tips. In general, when not using the iron, unplug it or let it sleep to increase the longevity of replaceable tips. The default sleep temperature can be customized.</p>
 <p>Simply moving the iron or pressing any button will wake it back up into soldering mode.</p>
 <h3 id="optional-hall-effect-feature-pinecil-only">Optional Hall Effect Feature (Pinecil only):</h3>
-<p>Inside the <a href="https://github.com/Ralim/IronOS/blob/dev/Documentation/Settings.md#setting-sleep-temp">Sleep Menu</a> is an additional type of sleep setting. Pinecil has an unpopulated footprint (<strong>U14</strong>) for a hall effect sensor, Silicon Labs <strong>Si7210-B-00-IV</strong>. After installing the hall effect sensor (HES), it is possible to auto-trigger Pinecil to enter sleep mode when it enters the stand, and <em>Zzzz</em> will appear (or text in detailed mode). This could be a fun enhancement for any Pinecil and adds a feature typically only found in more expensive high-end irons. The HES is available at many electronic stores for ~$2-$6.</p>
+<p>Inside the <a href="https://ralim.github.io/IronOS/Settings/#setting-sleep-temp">Sleep Menu</a> is an additional type of sleep setting. Pinecil has an unpopulated footprint (<strong>U14</strong>) for a hall effect sensor, Silicon Labs <strong>Si7210-B-00-IV</strong>. After installing the hall effect sensor (HES), it is possible to auto-trigger Pinecil to enter sleep mode when it enters the stand, and <em>Zzzz</em> will appear (or text in detailed mode). This could be a fun enhancement for any Pinecil and adds a feature typically only found in more expensive high-end irons. The HES is available at many electronic stores for ~$2-$6.</p>
 <p>After installing the HES on the PCB, place a magnet on the stand close enough to the sensor to activate one of ten user selectable settings.
   - 0=off, 1=1000, 2=750, 3=500, 4=250, 5=150, 6=100, 7=75, 8=50, 9=25   (9 has the highest sensitivity to magnets)
   - Setting of 1 might be used if you solder on PCBs with magnets and do not wish Pinecil to auto-sleep constantly. A very strong/large magnet would be required on the stand to activate the sleep mode if you use setting 1.