aboutsummaryrefslogtreecommitdiffhomepage
path: root/README.md
diff options
context:
space:
mode:
authorIvan Zorin <[email protected]>2024-11-15 02:03:11 +0300
committerGitHub <[email protected]>2024-11-15 00:03:11 +0100
commitd4a57eab4a461b642dc9de97f31fe8ef8f9955c0 (patch)
tree56566775366a46bba17971ad19e67f09526ae53d /README.md
parent7dd53257162e32b61aa7671deddd754076f44907 (diff)
downloadIronOS-d4a57eab4a461b642dc9de97f31fe8ef8f9955c0.tar.gz
IronOS-d4a57eab4a461b642dc9de97f31fe8ef8f9955c0.zip
README.md: fix mistypes discovered by @yo3fxy (#1996)
* README update * README update * README update * README update * README update * README update * README update * README update * README update * README update * README update * README.md: fix mistypes discovered by @yo3fxy
Diffstat (limited to 'README.md')
-rw-r--r--README.md6
1 files changed, 3 insertions, 3 deletions
diff --git a/README.md b/README.md
index 7af80a3b..d79fae5d 100644
--- a/README.md
+++ b/README.md
@@ -12,8 +12,8 @@ Originally conceived as an alternative firmware for the _TS100_, this firmware h
The firmware implements all of the standard features of a _smart_ soldering hardware, with lots of little extras and tweaks.
I highly recommend reading the installation guide fully when installing on your device. And after install just explore the settings menu.
-For soldering hardware that are designed to be powered by _smart_ power sources such as _PD_ or _QC_, the firmware supports settings around the negotiated power and voltage.
-For soldering hardware that are designed to be powered by batteries (_TS100_ & _Pinecil_), settings for a cutoff voltage for battery protection are supported.
+For soldering hardware that is designed to be powered by _smart_ power sources such as _PD_ or _QC_, the firmware supports settings around the negotiated power and voltage.
+For soldering hardware that is designed to be powered by batteries (_TS100_ & _Pinecil_), settings for a cutoff voltage for battery protection are supported.
Currently **31** languages are supported. When downloading the firmware for your soldering hardware, take note of the _language code_ in the file name.
@@ -114,7 +114,7 @@ After powering on the device for the first time with _IronOS_ installed and havi
- long hold of the `-/B` button enters the [_debug menu_](https://ralim.github.io/IronOS/DebugMenu/);
- in _menu mode_ (to make it short here):
- `-/B` scrolls & cycles through menus and submenus;
- - `-/A` enters to menu & submenu settings or changes their values if they are activated already.
+ - `+/A` enters to menu & submenu settings or changes their values if they are activated already.
Additional details are described in the [menu information](https://ralim.github.io/IronOS/Menu/).