translation_update (#1391)

* translation_update

* Unified formatting to match the one generated by [TranslationEditor.html](https://github.com/Ralim/IronOS/blob/dev/Translations/TranslationEditor.html).
* Added the counterfeit warning.

* Update translation_RU.json

* Update translation_RU.json

1 files changed, 212 insertions, 205 deletions

diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json
index 30f5c267..95dbaa05 100644
--- a/Translations/translation_YUE_HK.json
+++ b/Translations/translation_YUE_HK.json
@@ -1,207 +1,214 @@
 {

-  "languageCode": "YUE_HK",

-  "languageLocalName": "廣東話 (香港)",

-  "fonts": ["ascii_basic", "cjk"],

-  "tempUnitFahrenheit": true,

-  "messages": {

-    "SettingsCalibrationWarning": "開始温度校正之前，請先確定焫雞咀係處於室温！",

-    "SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？",

-    "UVLOWarningString": "電壓過低",

-    "UndervoltageString": "Undervoltage",

-    "InputVoltageString": "Input V: ",

-    "SleepingSimpleString": "Zzzz",

-    "SleepingAdvancedString": "Sleeping...",

-    "SleepingTipAdvancedString": "Tip:",

-    "OffString": "關"

-  },

-  "messagesWarn": {

-    "ResetOKMessage": "已重設！",

-    "SettingsResetMessage": "設定已被重設！",

-    "NoAccelerometerMessage": "未能偵測加速度計",

-    "NoPowerDeliveryMessage": "未能偵測PD晶片",

-    "LockingKeysString": "已鎖定",

-    "UnlockingKeysString": "已解除鎖定",

-    "WarningKeysLockedString": "!撳掣鎖定!",

-    "WarningThermalRunaway": "加熱失控"

-  },

-  "characters": {

-    "SettingRightChar": "右",

-    "SettingLeftChar": "左",

-    "SettingAutoChar": "自",

-    "SettingOffChar": "關",

-    "SettingSlowChar": "慢",

-    "SettingMediumChar": "中",

-    "SettingFastChar": "快",

-    "SettingStartNoneChar": "無",

-    "SettingStartSolderingChar": "焊",

-    "SettingStartSleepChar": "待",

-    "SettingStartSleepOffChar": "室",

-    "SettingSensitivityOff": "關",

-    "SettingSensitivityLow": "低",

-    "SettingSensitivityMedium": "中",

-    "SettingSensitivityHigh": "高",

-    "SettingLockDisableChar": "無",

-    "SettingLockBoostChar": "增",

-    "SettingLockFullChar": "全"

-  },

-  "menuGroups": {

-    "PowerMenu": {

-      "text2": "電源設定",

-      "desc": "電源設定"

-    },

-    "SolderingMenu": {

-      "text2": "焊接設定",

-      "desc": "焊接設定"

-    },

-    "PowerSavingMenu": {

-      "text2": "待機設定",

-      "desc": "自動待機慳電設定"

-    },

-    "UIMenu": {

-      "text2": "使用者介面",

-      "desc": "使用者介面設定"

-    },

-    "AdvancedMenu": {

-      "text2": "進階設定",

-      "desc": "進階設定"

-    }

-  },

-  "menuOptions": {

-    "DCInCutoff": {

-      "text2": "電源",

-      "desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每粒3.3V計算；依個設定會停用功率限制>"

-    },

-    "SleepTemperature": {

-      "text2": "待機温度",

-      "desc": "喺待機模式時嘅焫雞咀温度"

-    },

-    "SleepTimeout": {

-      "text2": "待機延時",

-      "desc": "自動進入待機模式前嘅閒置等候時間 <s=秒 | m=分鐘>"

-    },

-    "ShutdownTimeout": {

-      "text2": "自動熄機",

-      "desc": "自動熄機前嘅閒置等候時間 <m=分鐘>"

-    },

-    "MotionSensitivity": {

-      "text2": "動作敏感度",

-      "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"

-    },

-    "TemperatureUnit": {

-      "text2": "温度單位",

-      "desc": "C=攝氏 | F=華氏"

-    },

-    "AdvancedIdle": {

-      "text2": "詳細閒置畫面",

-      "desc": "喺閒置畫面以英文細字顯示詳細嘅資料"

-    },

-    "DisplayRotation": {

-      "text2": "畫面方向",

-      "desc": "右=使用右手 | 左=使用左手 | 自=自動"

-    },

-    "BoostTemperature": {

-      "text2": "增熱温度",

-      "desc": "喺增熱模式時使用嘅温度"

-    },

-    "AutoStart": {

-      "text2": "自動啓用",

-      "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"

-    },

-    "CooldownBlink": {

-      "text2": "降温時閃爍",

-      "desc": "停止加熱之後，當焫雞咀仲係熱嗰陣閃爍畫面"

-    },

-    "TemperatureCalibration": {

-      "text2": "温度校正？",

-      "desc": "開始校正焫雞咀温度位移"

-    },

-    "SettingsReset": {

-      "text2": "全部重設？",

-      "desc": "將所有設定重設到預設值"

-    },

-    "VoltageCalibration": {

-      "text2": "輸入電壓校正？",

-      "desc": "開始校正VIN輸入電壓 <長撳以退出>"

-    },

-    "AdvancedSoldering": {

-      "text2": "詳細焊接畫面",

-      "desc": "喺焊接模式畫面以英文細字顯示詳細嘅資料"

-    },

-    "ScrollingSpeed": {

-      "text2": "捲動速度",

-      "desc": "解說文字嘅捲動速度"

-    },

-    "QCMaxVoltage": {

-      "text2": "QC電壓",

-      "desc": "使用QC電源時請求嘅最高目標電壓"

-    },

-    "PDNegTimeout": {

-      "text2": "PD逾時",

-      "desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"

-    },

-    "PowerLimit": {

-      "text2": "功率限制",

-      "desc": "限制焫雞可用嘅最大功率 <W=watt（火）>"

-    },

-    "ReverseButtonTempChange": {

-      "text2": "反轉加減掣",

-      "desc": "反轉調校温度時加減掣嘅方向"

-    },

-    "TempChangeShortStep": {

-      "text2": "温度調整 短",

-      "desc": "調校温度時短撳一下嘅温度變幅"

-    },

-    "TempChangeLongStep": {

-      "text2": "温度調整 長",

-      "desc": "調校温度時長撳嘅温度變幅"

-    },

-    "PowerPulsePower": {

-      "text2": "電源脈衝",

-      "desc": "為保持電源喚醒而通電所用嘅功率 <watt（火）>"

-    },

-    "HallEffSensitivity": {

-      "text2": "磁場敏感度",

-      "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"

-    },

-    "LockingMode": {

-      "text2": "撳掣鎖定",

-      "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"

-    },

-    "MinVolCell": {

-      "text2": "最低電壓",

-      "desc": "每粒電池嘅最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"

-    },

-    "AnimLoop": {

-      "text2": "動畫循環",

-      "desc": "循環顯示功能表圖示動畫"

-    },

-    "AnimSpeed": {

-      "text2": "動畫速度",

-      "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"

-    },

-    "PowerPulseWait": {

-      "text2": "電源脈衝間隔",

-      "desc": "為保持電源喚醒，每次通電之間嘅間隔時間 <x2.5s（秒）>"

-    },

-    "PowerPulseDuration": {

-      "text2": "電源脈衝時長",

-      "desc": "為保持電源喚醒，每次通電脈衝嘅時間長度 <x250ms（亳秒）>"

-    },

-    "LanguageSwitch": {

-      "text2": "語言： 廣東話",

-      "desc": ""

-    },

-    "Brightness": {

-      "text2": "熒幕亮度",

-      "desc": "設定OLED熒幕嘅亮度"

-    },

-    "ColourInversion": {

-      "text2": "熒幕反轉色",

-      "desc": "反轉OLED熒幕嘅黑白色"

-    },

-    "LOGOTime": {

-      "text2": ["Boot logo", "duration"],

-      "desc": "Sets the duration for the boot logo (s=seconds)"

-    }

-  }

+	"languageCode": "YUE_HK",

+	"languageLocalName": "廣東話 (香港)",

+	"fonts": [

+		"ascii_basic",

+		"cjk"

+	],

+	"tempUnitFahrenheit": true,

+	"messages": {

+		"SettingsCalibrationWarning": "開始温度校正之前，請先確定焫雞咀係處於室温！",

+		"SettingsResetWarning": "你係咪確定要將全部設定重設到預設值？",

+		"UVLOWarningString": "電壓過低",

+		"UndervoltageString": "Undervoltage",

+		"InputVoltageString": "Input V: ",

+		"SleepingSimpleString": "Zzzz",

+		"SleepingAdvancedString": "Sleeping...",

+		"SleepingTipAdvancedString": "Tip:",

+		"OffString": "關",

+		"DeviceFailedValidationWarning": "Your device is most likely a counterfeit!"

+	},

+	"messagesWarn": {

+		"ResetOKMessage": "已重設！",

+		"SettingsResetMessage": "設定已被重設！",

+		"NoAccelerometerMessage": "未能偵測加速度計",

+		"NoPowerDeliveryMessage": "未能偵測PD晶片",

+		"LockingKeysString": "已鎖定",

+		"UnlockingKeysString": "已解除鎖定",

+		"WarningKeysLockedString": "!撳掣鎖定!",

+		"WarningThermalRunaway": "加熱失控"

+	},

+	"characters": {

+		"SettingRightChar": "右",

+		"SettingLeftChar": "左",

+		"SettingAutoChar": "自",

+		"SettingOffChar": "關",

+		"SettingSlowChar": "慢",

+		"SettingMediumChar": "中",

+		"SettingFastChar": "快",

+		"SettingStartNoneChar": "無",

+		"SettingStartSolderingChar": "焊",

+		"SettingStartSleepChar": "待",

+		"SettingStartSleepOffChar": "室",

+		"SettingSensitivityOff": "關",

+		"SettingSensitivityLow": "低",

+		"SettingSensitivityMedium": "中",

+		"SettingSensitivityHigh": "高",

+		"SettingLockDisableChar": "無",

+		"SettingLockBoostChar": "增",

+		"SettingLockFullChar": "全"

+	},

+	"menuGroups": {

+		"PowerMenu": {

+			"text2": "電源設定",

+			"desc": "電源設定"

+		},

+		"SolderingMenu": {

+			"text2": "焊接設定",

+			"desc": "焊接設定"

+		},

+		"PowerSavingMenu": {

+			"text2": "待機設定",

+			"desc": "自動待機慳電設定"

+		},

+		"UIMenu": {

+			"text2": "使用者介面",

+			"desc": "使用者介面設定"

+		},

+		"AdvancedMenu": {

+			"text2": "進階設定",

+			"desc": "進階設定"

+		}

+	},

+	"menuOptions": {

+		"DCInCutoff": {

+			"text2": "電源",

+			"desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每粒3.3V計算；依個設定會停用功率限制>"

+		},

+		"SleepTemperature": {

+			"text2": "待機温度",

+			"desc": "喺待機模式時嘅焫雞咀温度"

+		},

+		"SleepTimeout": {

+			"text2": "待機延時",

+			"desc": "自動進入待機模式前嘅閒置等候時間 <s=秒 | m=分鐘>"

+		},

+		"ShutdownTimeout": {

+			"text2": "自動熄機",

+			"desc": "自動熄機前嘅閒置等候時間 <m=分鐘>"

+		},

+		"MotionSensitivity": {

+			"text2": "動作敏感度",

+			"desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"

+		},

+		"TemperatureUnit": {

+			"text2": "温度單位",

+			"desc": "C=攝氏 | F=華氏"

+		},

+		"AdvancedIdle": {

+			"text2": "詳細閒置畫面",

+			"desc": "喺閒置畫面以英文細字顯示詳細嘅資料"

+		},

+		"DisplayRotation": {

+			"text2": "畫面方向",

+			"desc": "右=使用右手 | 左=使用左手 | 自=自動"

+		},

+		"BoostTemperature": {

+			"text2": "增熱温度",

+			"desc": "喺增熱模式時使用嘅温度"

+		},

+		"AutoStart": {

+			"text2": "自動啓用",

+			"desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"

+		},

+		"CooldownBlink": {

+			"text2": "降温時閃爍",

+			"desc": "停止加熱之後，當焫雞咀仲係熱嗰陣閃爍畫面"

+		},

+		"TemperatureCalibration": {

+			"text2": "温度校正？",

+			"desc": "開始校正焫雞咀温度位移"

+		},

+		"SettingsReset": {

+			"text2": "全部重設？",

+			"desc": "將所有設定重設到預設值"

+		},

+		"VoltageCalibration": {

+			"text2": "輸入電壓校正？",

+			"desc": "開始校正VIN輸入電壓 <長撳以退出>"

+		},

+		"AdvancedSoldering": {

+			"text2": "詳細焊接畫面",

+			"desc": "喺焊接模式畫面以英文細字顯示詳細嘅資料"

+		},

+		"ScrollingSpeed": {

+			"text2": "捲動速度",

+			"desc": "解說文字嘅捲動速度"

+		},

+		"QCMaxVoltage": {

+			"text2": "QC電壓",

+			"desc": "使用QC電源時請求嘅最高目標電壓"

+		},

+		"PDNegTimeout": {

+			"text2": "PD逾時",

+			"desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"

+		},

+		"PowerLimit": {

+			"text2": "功率限制",

+			"desc": "限制焫雞可用嘅最大功率 <W=watt（火）>"

+		},

+		"ReverseButtonTempChange": {

+			"text2": "反轉加減掣",

+			"desc": "反轉調校温度時加減掣嘅方向"

+		},

+		"TempChangeShortStep": {

+			"text2": "温度調整 短",

+			"desc": "調校温度時短撳一下嘅温度變幅"

+		},

+		"TempChangeLongStep": {

+			"text2": "温度調整 長",

+			"desc": "調校温度時長撳嘅温度變幅"

+		},

+		"PowerPulsePower": {

+			"text2": "電源脈衝",

+			"desc": "為保持電源喚醒而通電所用嘅功率 <watt（火）>"

+		},

+		"HallEffSensitivity": {

+			"text2": "磁場敏感度",

+			"desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"

+		},

+		"LockingMode": {

+			"text2": "撳掣鎖定",

+			"desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"

+		},

+		"MinVolCell": {

+			"text2": "最低電壓",

+			"desc": "每粒電池嘅最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"

+		},

+		"AnimLoop": {

+			"text2": "動畫循環",

+			"desc": "循環顯示功能表圖示動畫"

+		},

+		"AnimSpeed": {

+			"text2": "動畫速度",

+			"desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"

+		},

+		"PowerPulseWait": {

+			"text2": "電源脈衝間隔",

+			"desc": "為保持電源喚醒，每次通電之間嘅間隔時間 <x2.5s（秒）>"

+		},

+		"PowerPulseDuration": {

+			"text2": "電源脈衝時長",

+			"desc": "為保持電源喚醒，每次通電脈衝嘅時間長度 <x250ms（亳秒）>"

+		},

+		"LanguageSwitch": {

+			"text2": "語言： 廣東話",

+			"desc": ""

+		},

+		"Brightness": {

+			"text2": "熒幕亮度",

+			"desc": "設定OLED熒幕嘅亮度"

+		},

+		"ColourInversion": {

+			"text2": "熒幕反轉色",

+			"desc": "反轉OLED熒幕嘅黑白色"

+		},

+		"LOGOTime": {

+			"text2": [

+			"Boot logo",

+			"duration"

+		],

+			"desc": "Sets the duration for the boot logo (s=seconds)"

+		}

+	}

 }