soldering profile mode → profile mode

34 files changed, 115 insertions, 115 deletions

diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json
index 9d180ebd..72ddf0f5 100644
--- a/Translations/translation_BE.json
+++ b/Translations/translation_BE.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Адчувальнасць\nакселерометра",
diff --git a/Translations/translation_BG.json b/Translations/translation_BG.json
index e32b83f1..72b4f49f 100644
--- a/Translations/translation_BG.json
+++ b/Translations/translation_BG.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Усещане\nза движение",
diff --git a/Translations/translation_CS.json b/Translations/translation_CS.json
index 90739a29..fb4c4d1f 100644
--- a/Translations/translation_CS.json
+++ b/Translations/translation_CS.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Citlivost\nna pohyb",
diff --git a/Translations/translation_DA.json b/Translations/translation_DA.json
index fbdd348c..12625a67 100644
--- a/Translations/translation_DA.json
+++ b/Translations/translation_DA.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Bevægelses\nfølsomhed",
diff --git a/Translations/translation_DE.json b/Translations/translation_DE.json
index 559301b4..d04c57c2 100644
--- a/Translations/translation_DE.json
+++ b/Translations/translation_DE.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhasen",
-            "description": "Anzahl an Phasen für das Lötprofil"
+            "description": "Anzahl an Phasen im Profilmodus"
         },
         "ProfilePreheatTemp": {
             "displayText": "Vorheiz-\ntemperatur",
-            "description": "Auf diese Temperatur vorheizen zum Start des Profils"
+            "description": "Zu Beginn des Profilmodus auf diese Temperatur vorheizen"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Vorheiz-\nrate",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Abkühl-\nrate",
-            "description": "Abkühlenen nach der letzten Phase mit dieser Geschwindigkeit (Grad pro Sekunde)"
+            "description": "Am Ende des Profilmodus mit dieser Geschwindigkeit abkühlen (Grad pro Sekunde)"
         },
         "MotionSensitivity": {
             "displayText": "Bewegungs-\nempfindlichk.",
diff --git a/Translations/translation_EL.json b/Translations/translation_EL.json
index 2791444b..ae81203d 100644
--- a/Translations/translation_EL.json
+++ b/Translations/translation_EL.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Ευαισθησία\nκίνησης",
diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json
index 1842bd12..2c044e33 100644
--- a/Translations/translation_EN.json
+++ b/Translations/translation_EN.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Motion\nsensitivity",
diff --git a/Translations/translation_ES.json b/Translations/translation_ES.json
index 7c17fe66..575ddf1a 100644
--- a/Translations/translation_ES.json
+++ b/Translations/translation_ES.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Detección de\nmovimiento",
diff --git a/Translations/translation_FI.json b/Translations/translation_FI.json
index 0831af0a..9bb4e90c 100644
--- a/Translations/translation_FI.json
+++ b/Translations/translation_FI.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Liikkeen\nherkkyys",
diff --git a/Translations/translation_FR.json b/Translations/translation_FR.json
index ea7984cb..4aca77b0 100644
--- a/Translations/translation_FR.json
+++ b/Translations/translation_FR.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Sensibilité\nau mouvement",
diff --git a/Translations/translation_HR.json b/Translations/translation_HR.json
index 7256ef88..093e66f7 100644
--- a/Translations/translation_HR.json
+++ b/Translations/translation_HR.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Osjetljivost\npokreta",
diff --git a/Translations/translation_HU.json b/Translations/translation_HU.json
index 74e0a0c4..449a28c3 100644
--- a/Translations/translation_HU.json
+++ b/Translations/translation_HU.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Mozgás\nérzékenység",
diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json
index f5bfea25..672061d7 100644
--- a/Translations/translation_IT.json
+++ b/Translations/translation_IT.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Sensibilità\nal movimento",
diff --git a/Translations/translation_JA_JP.json b/Translations/translation_JA_JP.json
index 92f0fa20..f2db8ef0 100755
--- a/Translations/translation_JA_JP.json
+++ b/Translations/translation_JA_JP.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "動きの感度",
diff --git a/Translations/translation_LT.json b/Translations/translation_LT.json
index 0dd08c10..96387be6 100644
--- a/Translations/translation_LT.json
+++ b/Translations/translation_LT.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Judesio\njautrumas",
diff --git a/Translations/translation_NB.json b/Translations/translation_NB.json
index c0c383a0..f716171f 100644
--- a/Translations/translation_NB.json
+++ b/Translations/translation_NB.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "BSensr\n",
diff --git a/Translations/translation_NL.json b/Translations/translation_NL.json
index f848c26b..4a1d2d56 100644
--- a/Translations/translation_NL.json
+++ b/Translations/translation_NL.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Bewegings-\ngevoeligheid",
diff --git a/Translations/translation_NL_BE.json b/Translations/translation_NL_BE.json
index 1db72308..9d841449 100644
--- a/Translations/translation_NL_BE.json
+++ b/Translations/translation_NL_BE.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Bewegings-\ngevoeligheid",
diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json
index 312767f3..604e8e29 100644
--- a/Translations/translation_PL.json
+++ b/Translations/translation_PL.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Czułość\nwykr. ruchu",
diff --git a/Translations/translation_PT.json b/Translations/translation_PT.json
index 22835448..47be541a 100644
--- a/Translations/translation_PT.json
+++ b/Translations/translation_PT.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Sensibilidade\nmovimento",
diff --git a/Translations/translation_RO.json b/Translations/translation_RO.json
index bf04a3df..b40e8d16 100644
--- a/Translations/translation_RO.json
+++ b/Translations/translation_RO.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Sensibilitate\nla miscare",
diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json
index 9a2803e0..2488aaef 100644
--- a/Translations/translation_RU.json
+++ b/Translations/translation_RU.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Чувствительн.\nакселерометра",
diff --git a/Translations/translation_SK.json b/Translations/translation_SK.json
index 8ec31214..b0b550ad 100644
--- a/Translations/translation_SK.json
+++ b/Translations/translation_SK.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Citlivosť\npohybu",
diff --git a/Translations/translation_SL.json b/Translations/translation_SL.json
index 0cb20531..5e7d2d6d 100644
--- a/Translations/translation_SL.json
+++ b/Translations/translation_SL.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Občutljivost\npremikanja",
diff --git a/Translations/translation_SR_CYRL.json b/Translations/translation_SR_CYRL.json
index e1b55280..35f85793 100644
--- a/Translations/translation_SR_CYRL.json
+++ b/Translations/translation_SR_CYRL.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Осетљивост\nна покрет",
diff --git a/Translations/translation_SR_LATN.json b/Translations/translation_SR_LATN.json
index 38698ca7..6906b7be 100644
--- a/Translations/translation_SR_LATN.json
+++ b/Translations/translation_SR_LATN.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Osetljivost\nna pokret",
diff --git a/Translations/translation_SV.json b/Translations/translation_SV.json
index 6b9ac562..58d6f6d8 100644
--- a/Translations/translation_SV.json
+++ b/Translations/translation_SV.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Rörelse-\nkänslighet",
diff --git a/Translations/translation_TR.json b/Translations/translation_TR.json
index 36a33937..3a22cd19 100644
--- a/Translations/translation_TR.json
+++ b/Translations/translation_TR.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "HARHAS\n",
diff --git a/Translations/translation_UK.json b/Translations/translation_UK.json
index 55dee655..4302a650 100644
--- a/Translations/translation_UK.json
+++ b/Translations/translation_UK.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Чутливість\nсенсору руху",
diff --git a/Translations/translation_VI.json b/Translations/translation_VI.json
index d77ee97e..10c36e0b 100644
--- a/Translations/translation_VI.json
+++ b/Translations/translation_VI.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "Cam bien\ncu đong",
diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json
index 127e555d..3b990f9c 100644
--- a/Translations/translation_YUE_HK.json
+++ b/Translations/translation_YUE_HK.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "動作敏感度",
diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json
index 48da8c1d..a4c8bbb4 100644
--- a/Translations/translation_ZH_CN.json
+++ b/Translations/translation_ZH_CN.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "动作灵敏度",
diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json
index 30e9bd0c..ec0ec2e3 100644
--- a/Translations/translation_ZH_TW.json
+++ b/Translations/translation_ZH_TW.json
@@ -154,11 +154,11 @@
         },
         "ProfilePhases": {
             "displayText": "Profile\nPhases",
-            "description": "Number of phases for the soldering profile"
+            "description": "Number of phases in profile mode"
         },
         "ProfilePreheatTemp": {
             "displayText": "Preheat\nTemp",
-            "description": "Preheat to this temperature when starting the profile"
+            "description": "Preheat to this temperature at the start of profile mode"
         },
         "ProfilePreheatSpeed": {
             "displayText": "Preheat\nSpeed",
@@ -206,7 +206,7 @@
         },
         "ProfileCooldownSpeed": {
             "displayText": "Cooldown\nSpeed",
-            "description": "Cooldown at this rate after the last phase (degrees per second)"
+            "description": "Cooldown at this rate at the end of profile mode (degrees per second)"
         },
         "MotionSensitivity": {
             "displayText": "動作敏感度",
diff --git a/Translations/translations_definitions.json b/Translations/translations_definitions.json
index 2229ddf9..96d237b7 100644
--- a/Translations/translations_definitions.json
+++ b/Translations/translations_definitions.json
@@ -70,13 +70,13 @@
             "id": "ProfilePreheatString",
             "maxLen": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Shown when the soldering profile is preheating"
+            "description": "Shown in profile mode while preheating"
         },
         {
             "id": "ProfileCooldownString",
             "maxLen": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Shown when the soldering profile is done and cooling down"
+            "description": "Shown in profile mode while cooling down"
         },
         {
             "id": "SleepingSimpleString",
@@ -289,98 +289,98 @@
             "maxLen": 6,
             "maxLen2": 13,
             "include": ["PROFILE_SUPPORT"],
-            "description": "set the number of phases for the soldering profile."
+            "description": "set the number of phases for profile mode."
         },
         {
             "id": "ProfilePreheatTemp",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "For the soldering profile, preheat to this temperature before proceeding with phase 1."
+            "description": "Preheat to this temperature at the start of profile mode."
         },
         {
             "id": "ProfilePreheatSpeed",
             "maxLen": 5,
             "maxLen2": 11,
             "include": ["PROFILE_SUPPORT"],
-            "description": "How fast the temperature is allowed to rise during the heatup phase of the soldering profile."
+            "description": "How fast the temperature is allowed to rise during the preheat phase at the start of profile mode."
         },
         {
             "id": "ProfilePhase1Temp",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Target temperature for the end of phase 1 of the soldering profile."
+            "description": "Target temperature for the end of phase 1 of profile mode."
         },
         {
             "id": "ProfilePhase1Duration",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Duration of phase 1 of the soldering profile. The phase might actually take longer if it takes longer to reach the target temperature."
+            "description": "Duration of phase 1 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase2Temp",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Target temperature for the end of phase 2 of the soldering profile."
+            "description": "Target temperature for the end of phase 2 of profile mode."
         },
         {
             "id": "ProfilePhase2Duration",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Duration of phase 2 of the soldering profile. The phase might actually take longer if it takes longer to reach the target temperature."
+            "description": "Duration of phase 2 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase3Temp",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Target temperature for the end of phase 3 of the soldering profile."
+            "description": "Target temperature for the end of phase 3 of profile mode."
         },
         {
             "id": "ProfilePhase3Duration",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Duration of phase 3 of the soldering profile. The phase might actually take longer if it takes longer to reach the target temperature."
+            "description": "Duration of phase 3 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase4Temp",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Target temperature for the end of phase 5 of the soldering profile."
+            "description": "Target temperature for the end of phase 5 of profile mode."
         },
         {
             "id": "ProfilePhase4Duration",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Duration of phase 5 of the soldering profile. The phase might actually take longer if it takes longer to reach the target temperature."
+            "description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase5Temp",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Target temperature for the end of phase 5 of the soldering profile."
+            "description": "Target temperature for the end of phase 5 of profile mode."
         },
         {
             "id": "ProfilePhase5Duration",
             "maxLen": 4,
             "maxLen2": 9,
             "include": ["PROFILE_SUPPORT"],
-            "description": "Duration of phase 5 of the soldering profile. The phase might actually take longer if it takes longer to reach the target temperature."
+            "description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfileCooldownSpeed",
             "maxLen": 5,
             "maxLen2": 11,
             "include": ["PROFILE_SUPPORT"],
-            "description": "How fast the temperature is allowed to drop after the last phase of the soldering profile."
+            "description": "How fast the temperature is allowed to drop during the cooldown phase at the end of profile mode."
         },
         {
             "id": "MotionSensitivity",