diff options
33 files changed, 3838 insertions, 3840 deletions
diff --git a/Translations/translation_BE.json b/Translations/translation_BE.json index 13a5bfd2..bfc93b10 100644 --- a/Translations/translation_BE.json +++ b/Translations/translation_BE.json @@ -106,6 +106,69 @@ ],
"desc": "Крыніца сілкавання. Усталюе напругу адсечкі. (DC 10В) (S 3,3В на ячэйку, без абмежавання магутнасці)"
},
+ "MinVolCell": {
+ "text2": [
+ "Мін.",
+ "напр."
+ ],
+ "desc": "Мінімальная дазволеная напруга на ячэйку (3S: 3 - 3,7V | 4S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Магутнасць",
+ "сілкавання"
+ ],
+ "desc": "Магутнасць выкарыстоўваемай крыніцы сілкавання"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "прыпынак"
+ ],
+ "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC (0: адключана)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "t° турба",
+ "рэжыму"
+ ],
+ "desc": "Тэмпература джала ў турба-рэжыме"
+ },
+ "AutoStart": {
+ "text2": [
+ "Аўта",
+ "старт"
+ ],
+ "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Крок тэмп.",
+ "кар. нац."
+ ],
+ "desc": "Крок вымярэння тэмпературы пры кароткім націску кнопак"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Крок тэмп.",
+ "пад. нац."
+ ],
+ "desc": "Крок вымярэння тэмпературы пры падоўжаным націску кнопак"
+ },
+ "LockingMode": {
+ "text2": [
+ "Дазволіць",
+ "блок. кнопак"
+ ],
+ "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Адчувальнасць",
+ "акселерометра"
+ ],
+ "desc": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+ },
"SleepTemperature": {
"text2": [
"Тэмп.",
@@ -127,12 +190,12 @@ ],
"desc": "Час да адключэння паяльніка (Хвіліны)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Адчувальнасць",
- "акселерометра"
+ "Эфект Хола",
+ "адчувальнасць"
],
- "desc": "Адчувальнасць акселерометра (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+ "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
},
"TemperatureUnit": {
"text2": [
@@ -141,13 +204,6 @@ ],
"desc": "Адзінкі вымярэння тэмпературы (C=Цэльcія | F=Фарэнгейта)"
},
- "AdvancedIdle": {
- "text2": [
- "Падрабязны",
- "рэжым чакання"
- ],
- "desc": "Адлюстроўваць дэталёвую инфармацыю паменьшаным шрыфтом на экране чакання"
- },
"DisplayRotation": {
"text2": [
"Арыентацыя",
@@ -155,20 +211,6 @@ ],
"desc": "Арыентацыя экрану (П=Правая рука | Л=Левая рука | А=Аўта)"
},
- "BoostTemperature": {
- "text2": [
- "t° турба",
- "рэжыму"
- ],
- "desc": "Тэмпература джала ў турба-рэжыме"
- },
- "AutoStart": {
- "text2": [
- "Аўта",
- "старт"
- ],
- "desc": "Рэжым, у якім запускаецца паяльнік пры падачы сілкавання (В=Выкл. | П=Пайка | Ч=Чаканне | К=Чаканне пры комн. тэмп.)"
- },
"CooldownBlink": {
"text2": [
"Мігценне t°",
@@ -176,34 +218,6 @@ ],
"desc": "Міргаць тэмпературай на экране астуджэння, пакуль джала яшчэ гарачае"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Скід",
- "наладаў"
- ],
- "desc": "Скід наладаў да першапачатковых значэнняў"
- },
- "VoltageCalibration": {
- "text2": [
- "Каліброўка",
- "напругі"
- ],
- "desc": "Каліброўка ўваходнай напругі (падоўжаны націск для выхаду)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Падрабязны",
- "экран пайкі"
- ],
- "desc": "Паказваць дэталёвую інформацыю на экране пайкі"
- },
"ScrollingSpeed": {
"text2": [
"Хуткацсь",
@@ -211,89 +225,89 @@ ],
"desc": "Хуткасць гартання тэксту (М=марудна | Х=хутка)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Магутнасць",
- "сілкавання"
+ "Інвертаваць",
+ "кнопкі"
],
- "desc": "Магутнасць выкарыстоўваемай крыніцы сілкавання"
+ "desc": "Інвертаваць кнопкі вымярэння тэмпературы"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "прыпынак"
+ "Хуткасць",
+ "анімацыі"
],
- "desc": "Час чакання ўзгаднення PD з крокам 100 мс для сумяшчальнасці з некаторымі зараднымі зараднымі прыладамі QC (0: адключана)"
+ "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкая | С=Сярэдняя | В=Высокая)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Межы",
- "магутнасці"
+ "Зацыкленая",
+ "анімацыя"
],
- "desc": "Максімальная магутнасць, якую можа выкарыстоўваць паяльнік (Ватт)"
+ "desc": "Зацыкленая анімацыя гузікаў у галоўным меню"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Інвертаваць",
- "кнопкі"
+ "Экран",
+ "Яркасць"
],
- "desc": "Інвертаваць кнопкі вымярэння тэмпературы"
+ "desc": "Адрэгулюйце кантраснасць / яркасць OLED-экрана"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Крок тэмп.",
- "кар. нац."
+ "Экран",
+ "Інвертаваць"
],
- "desc": "Крок вымярэння тэмпературы пры кароткім націску кнопак"
+ "desc": "Інвертаваць колеры OLED-экрана"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Крок тэмп.",
- "пад. нац."
+ "Лагатып загрузкі",
+ "працягласць"
],
- "desc": "Крок вымярэння тэмпературы пры падоўжаным націску кнопак"
+ "desc": "Усталяваць працягласць лагатыпа загрузкі (s=Секунды)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Сіла імп.",
- "сілкав. Вт"
+ "Падрабязны",
+ "рэжым чакання"
],
- "desc": "Сіла імпульса ўтрымливаючага ад сну павербанку ці іншай крыніцы сілкавання"
+ "desc": "Адлюстроўваць дэталёвую инфармацыю паменьшаным шрыфтом на экране чакання"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Эфект Хола",
- "адчувальнасць"
+ "Падрабязны",
+ "экран пайкі"
],
- "desc": "Узровень адчувальнасці датчыка хола ў рэжыме сну (0=Выкл. | 1=Мін. | ... | 9=Макс.)"
+ "desc": "Паказваць дэталёвую інформацыю на экране пайкі"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Дазволіць",
- "блок. кнопак"
+ "Межы",
+ "магутнасці"
],
- "desc": "Пры рабоце падоўжаны націск дзьвух кнопак блакуе іх (А=Адключана | Т=Толькі турба | П=Поўная блакіроўка)"
+ "desc": "Максімальная магутнасць, якую можа выкарыстоўваць паяльнік (Ватт)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Мін.",
- "напр."
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Мінімальная дазволеная напруга на ячэйку (3S: 3 - 3,7V | 4S: 2,4 - 3,7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Зацыкленая",
- "анімацыя"
+ "Каліброўка",
+ "напругі"
],
- "desc": "Зацыкленая анімацыя гузікаў у галоўным меню"
+ "desc": "Каліброўка ўваходнай напругі (падоўжаны націск для выхаду)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Хуткасць",
- "анімацыі"
+ "Сіла імп.",
+ "сілкав. Вт"
],
- "desc": "Хуткасць анімацыі гузікаў у галоўным меню (Мілісекунды) (А=Адключана | Н=Нізкая | С=Сярэдняя | В=Высокая)"
+ "desc": "Сіла імпульса ўтрымливаючага ад сну павербанку ці іншай крыніцы сілкавання"
},
"PowerPulseWait": {
"text2": [
@@ -309,33 +323,19 @@ ],
"desc": "Працягласць імпульсу няспання (x 250 мс)"
},
+ "SettingsReset": {
+ "text2": [
+ "Скід",
+ "наладаў"
+ ],
+ "desc": "Скід наладаў да першапачатковых значэнняў"
+ },
"LanguageSwitch": {
"text2": [
"Мова:",
" BY Беларуская"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Экран",
- "Яркасць"
- ],
- "desc": "Адрэгулюйце кантраснасць / яркасць OLED-экрана"
- },
- "ColourInversion": {
- "text2": [
- "Экран",
- "Інвертаваць"
- ],
- "desc": "Інвертаваць колеры OLED-экрана"
- },
- "LOGOTime": {
- "text2": [
- "Лагатып загрузкі",
- "працягласць"
- ],
- "desc": "Усталяваць працягласць лагатыпа загрузкі (s=Секунды)"
}
}
}
diff --git a/Translations/translation_BG.json b/Translations/translation_BG.json index 7798d2e4..911103aa 100644 --- a/Translations/translation_BG.json +++ b/Translations/translation_BG.json @@ -105,6 +105,69 @@ ],
"desc": "Източник на захранване. Минимално напрежение. (DC 10V) (S 3,3V за клетка)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Мощност на",
+ "захранване"
+ ],
+ "desc": "Мощност на избраното захранване"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Турбо",
+ "темп."
+ ],
+ "desc": "Температура за \"турбо\" режим"
+ },
+ "AutoStart": {
+ "text2": [
+ "Автоматичен",
+ "работен режим"
+ ],
+ "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Промяна T",
+ "бързо?"
+ ],
+ "desc": "Промяна на температура при бързо натискане на бутон!"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Промяна Т",
+ "задържане?"
+ ],
+ "desc": "Промяна на температура при задържане на бутон!"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Усещане",
+ "за движение"
+ ],
+ "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
+ },
"SleepTemperature": {
"text2": [
"Темп.",
@@ -126,12 +189,12 @@ ],
"desc": "Изключване след (Минути)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Усещане",
- "за движение"
+ "Hall sensor",
+ "sensitivity"
],
- "desc": "Усещане за движение (0=Изключено | 1=Слабо | ... | 9=Силно)"
+ "desc": "Sensitivity to magnets (0=Изключено | 1=Слабо | ... | 9=Силно)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Единици за температура (C=Целзии | F=Фаренхайт)"
},
- "AdvancedIdle": {
- "text2": [
- "Детайлен",
- "екран в покой"
- ],
- "desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
- },
"DisplayRotation": {
"text2": [
"Ориентация",
@@ -154,20 +210,6 @@ ],
"desc": "Ориентация на дисплея (R=Дясна Ръка | L=Лява Ръка | A=Автоматично)"
},
- "BoostTemperature": {
- "text2": [
- "Турбо",
- "темп."
- ],
- "desc": "Температура за \"турбо\" режим"
- },
- "AutoStart": {
- "text2": [
- "Автоматичен",
- "работен режим"
- ],
- "desc": "Режим на поялника при включване на захранването. (И=Изключен | Р=Работен | С=Сън | П=Сън температура помещение)"
- },
"CooldownBlink": {
"text2": [
"Мигай при",
@@ -175,34 +217,6 @@ ],
"desc": "След изключване от работен режим, индикатора за температура да мига докато човката на поялника все още е топла"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
- },
- "SettingsReset": {
- "text2": [
- "Фабрични",
- "настройки?"
- ],
- "desc": "Връщане на фабрични настройки"
- },
- "VoltageCalibration": {
- "text2": [
- "Калибриране",
- "напрежение?"
- ],
- "desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
- },
- "AdvancedSoldering": {
- "text2": [
- "Детайлен",
- "работен екран"
- ],
- "desc": "Детайлна информация в работен режим при запояване"
- },
"ScrollingSpeed": {
"text2": [
"Скорост",
@@ -210,89 +224,89 @@ ],
"desc": "Скорост на движение на този текст"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Мощност на",
- "захранване"
+ "Размяна",
+ "бутони +-?"
],
- "desc": "Мощност на избраното захранване"
+ "desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Лимит на",
- "мощност"
+ "Anim.",
+ "loop"
],
- "desc": "Максимална мощност на поялника (Watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Размяна",
- "бутони +-?"
+ "Screen",
+ "brightness"
],
- "desc": "Обръщане на бутоните \"+\" и \"-\" за промяна на температурата на върха на поялника"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Промяна T",
- "бързо?"
+ "Invert",
+ "screen"
],
- "desc": "Промяна на температура при бързо натискане на бутон!"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Промяна Т",
- "задържане?"
+ "Boot logo",
+ "duration"
],
- "desc": "Промяна на температура при задържане на бутон!"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Захранващ",
- "импулс"
+ "Детайлен",
+ "екран в покой"
],
- "desc": "Поддържане на интензивност на захранващия импулс"
+ "desc": "Покажи детайлна информация със ситен шрифт на екрана в режим на покой."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Детайлен",
+ "работен екран"
],
- "desc": "Sensitivity to magnets (0=Изключено | 1=Слабо | ... | 9=Силно)"
+ "desc": "Детайлна информация в работен режим при запояване"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Лимит на",
+ "мощност"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Максимална мощност на поялника (Watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Калибриране",
+ "напрежение?"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Калибриране на входното напрежение. Задръжте бутонa за изход"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Захранващ",
+ "импулс"
],
- "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+ "desc": "Поддържане на интензивност на захранващия импулс"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250мс)"
},
+ "SettingsReset": {
+ "text2": [
+ "Фабрични",
+ "настройки?"
+ ],
+ "desc": "Връщане на фабрични настройки"
+ },
"LanguageSwitch": {
"text2": [
"Език:",
" BG Български"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_CS.json b/Translations/translation_CS.json index dc17fd90..b634d795 100644 --- a/Translations/translation_CS.json +++ b/Translations/translation_CS.json @@ -105,6 +105,69 @@ ],
"desc": "Při nižším napětí ukončit pájení (DC 10V) (S 3,3V na článek, zakázat omezení napájení)."
},
+ "MinVolCell": {
+ "text2": [
+ "Minimální",
+ "napětí"
+ ],
+ "desc": "Minimální dovolené napětí po článku (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Napětí",
+ "QC"
+ ],
+ "desc": "Maximální napětí QC pro jednání páječkou"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "Maximální prodleva při jednání PD ve 100ms krocích pro kompatibilitu s některými QC nabíječkami"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Teplota",
+ "boostu"
+ ],
+ "desc": "Teplota hrotu v \"režimu boost\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Chování",
+ "při startu"
+ ],
+ "desc": "V=vypnuto | P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Krok teploty",
+ "krátký?"
+ ],
+ "desc": "Velikost přídavku při změně teploty krátkým stiskem tlačítka"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Krok teploty",
+ "dlouhý?"
+ ],
+ "desc": "Velikost přídavku při změně teploty dlouhým stiskem tlačítka"
+ },
+ "LockingMode": {
+ "text2": [
+ "Povolit zamč.",
+ "tlačítek"
+ ],
+ "desc": "Při pájení podržte obě tlačítka pro jejich zamčení (Z=zakázáno | B=pouze v režimu boost | U=úplné zamčení)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Citlivost",
+ "na pohyb"
+ ],
+ "desc": "0=vyp | 1=nejméně citlivé | ... | 9=nejvíce citlivé"
+ },
"SleepTemperature": {
"text2": [
"Teplota",
@@ -126,12 +189,12 @@ ],
"desc": "Interval automatického vypnutí (m=minut)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
"Citlivost",
- "na pohyb"
+ "Hall. čidla"
],
- "desc": "0=vyp | 1=nejméně citlivé | ... | 9=nejvíce citlivé"
+ "desc": "Citlivost Hallova čidla pro detekci spánku (0=vypnuto | 1=nejméně citlivé | ... | 9=nejvíce citlivé)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "C=Celsius | F=Fahrenheit"
},
- "AdvancedIdle": {
- "text2": [
- "Podrobná obr.",
- "nečinnosti"
- ],
- "desc": "Zobrazit detailní informace malým fontem na obrazovce nečinnosti"
- },
"DisplayRotation": {
"text2": [
"Orientace",
@@ -154,20 +210,6 @@ ],
"desc": "P=pravák | L=levák | A=automaticky"
},
- "BoostTemperature": {
- "text2": [
- "Teplota",
- "boostu"
- ],
- "desc": "Teplota hrotu v \"režimu boost\""
- },
- "AutoStart": {
- "text2": [
- "Chování",
- "při startu"
- ],
- "desc": "V=vypnuto | P=pájecí teplota | S=spánková teplota | M=zahřát hrot po pohybu"
- },
"CooldownBlink": {
"text2": [
"Blikáni při",
@@ -175,34 +217,6 @@ ],
"desc": "Blikat teplotou při chladnutí dokud je hrot horký"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Obnovit tovární",
- "nastavení?"
- ],
- "desc": "Obnovit všechna nastavení na výchozí"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibrovat",
- "vstupní napětí?"
- ],
- "desc": "Začít kalibraci vstupního napětí (dlouhý stisk pro ukončení)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Podrobná obr.",
- "pájení"
- ],
- "desc": "Zobrazit detailní informace malým fontem na obrazovce pájení"
- },
"ScrollingSpeed": {
"text2": [
"Rychlost",
@@ -210,89 +224,89 @@ ],
"desc": "Rychlost posouvání popisků podobných tomuto (P=pomalu | R=rychle)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Napětí",
- "QC"
+ "Prohodit",
+ "tl. +-?"
],
- "desc": "Maximální napětí QC pro jednání páječkou"
+ "desc": "Prohodit tlačítka pro změnu teploty"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "rychlost"
],
- "desc": "Maximální prodleva při jednání PD ve 100ms krocích pro kompatibilitu s některými QC nabíječkami"
+ "desc": "Tempo animace ikon v menu (O=vypnuto | P=pomalu | S=středně | R=rychle)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Omezení",
- "Výkonu"
+ "Anim.",
+ "smyčka"
],
- "desc": "Maximální příkon páječky (W=watt)"
+ "desc": "Animovat ikony hlavního menu ve smyčce"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Prohodit",
- "tl. +-?"
+ "Jas",
+ "obrazovky"
],
- "desc": "Prohodit tlačítka pro změnu teploty"
+ "desc": "Upravit jas OLED"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Krok teploty",
- "krátký?"
+ "Invertovat",
+ "obrazovku"
],
- "desc": "Velikost přídavku při změně teploty krátkým stiskem tlačítka"
+ "desc": "Invertovat barvy na OLED"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Krok teploty",
- "dlouhý?"
+ "Trvání",
+ "boot loga"
],
- "desc": "Velikost přídavku při změně teploty dlouhým stiskem tlačítka"
+ "desc": "Nastavení doby trvání boot loga (s=sekundy)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Napájecí",
- "pulz"
+ "Podrobná obr.",
+ "nečinnosti"
],
- "desc": "Intenzita výkonu pulzu pro udržení páječky vzhůru (watt)"
+ "desc": "Zobrazit detailní informace malým fontem na obrazovce nečinnosti"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Citlivost",
- "Hall. čidla"
+ "Podrobná obr.",
+ "pájení"
],
- "desc": "Citlivost Hallova čidla pro detekci spánku (0=vypnuto | 1=nejméně citlivé | ... | 9=nejvíce citlivé)"
+ "desc": "Zobrazit detailní informace malým fontem na obrazovce pájení"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Povolit zamč.",
- "tlačítek"
+ "Omezení",
+ "Výkonu"
],
- "desc": "Při pájení podržte obě tlačítka pro jejich zamčení (Z=zakázáno | B=pouze v režimu boost | U=úplné zamčení)"
+ "desc": "Maximální příkon páječky (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimální",
- "napětí"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimální dovolené napětí po článku (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "smyčka"
+ "Kalibrovat",
+ "vstupní napětí?"
],
- "desc": "Animovat ikony hlavního menu ve smyčce"
+ "desc": "Začít kalibraci vstupního napětí (dlouhý stisk pro ukončení)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "rychlost"
+ "Napájecí",
+ "pulz"
],
- "desc": "Tempo animace ikon v menu (O=vypnuto | P=pomalu | S=středně | R=rychle)"
+ "desc": "Intenzita výkonu pulzu pro udržení páječky vzhůru (watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Délka pulzu pro udržení páječky vzhůru (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Obnovit tovární",
+ "nastavení?"
+ ],
+ "desc": "Obnovit všechna nastavení na výchozí"
+ },
"LanguageSwitch": {
"text2": [
"Jazyk:",
" CS Český"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Jas",
- "obrazovky"
- ],
- "desc": "Upravit jas OLED"
- },
- "ColourInversion": {
- "text2": [
- "Invertovat",
- "obrazovku"
- ],
- "desc": "Invertovat barvy na OLED"
- },
- "LOGOTime": {
- "text2": [
- "Trvání",
- "boot loga"
- ],
- "desc": "Nastavení doby trvání boot loga (s=sekundy)"
}
}
}
diff --git a/Translations/translation_DA.json b/Translations/translation_DA.json index 402a2120..1b40034f 100644 --- a/Translations/translation_DA.json +++ b/Translations/translation_DA.json @@ -105,6 +105,69 @@ ],
"desc": "Strømforsyning. Indstil Cutoff Spændingen. (DC 10V) (S 3,3V per cell)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "voltage"
+ ],
+ "desc": "Max QC voltage the iron should negotiate for"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost",
+ "temp"
+ ],
+ "desc": "Temperatur i \"boost mode\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Start-up",
+ "behavior"
+ ],
+ "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp change",
+ "short"
+ ],
+ "desc": "Temperature-change-increment on short button press"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Motion",
+ "sensitivity"
+ ],
+ "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+ },
"SleepTemperature": {
"text2": [
"Sleep",
@@ -126,12 +189,12 @@ ],
"desc": "sluknings Timeout (Minutter)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Motion",
+ "Hall sensor",
"sensitivity"
],
- "desc": "Bevægelsesfølsomhed (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+ "desc": "Sensitivity to magnets (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Temperatur Enhed (C=Celsius | F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Detailed",
- "idle screen"
- ],
- "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
- },
"DisplayRotation": {
"text2": [
"Display",
@@ -154,20 +210,6 @@ ],
"desc": "Skærm Orientering (H=Højre Håndet | V=Venstre Håndet | A=Automatisk)"
},
- "BoostTemperature": {
- "text2": [
- "Boost",
- "temp"
- ],
- "desc": "Temperatur i \"boost mode\""
- },
- "AutoStart": {
- "text2": [
- "Start-up",
- "behavior"
- ],
- "desc": "Start automatisk med lodning når strøm sættes til. (S=Slukket | L=Lodning | D=Dvale tilstand | R=Dvale tilstand rumtemperatur)"
- },
"CooldownBlink": {
"text2": [
"Cooldown",
@@ -175,34 +217,6 @@ ],
"desc": "Blink temperaturen på skærmen, mens spidsen stadig er varm."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Restore default",
- "settings"
- ],
- "desc": "Gendan alle indstillinger"
- },
- "VoltageCalibration": {
- "text2": [
- "Calibrate",
- "input voltage?"
- ],
- "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
- },
- "AdvancedSoldering": {
- "text2": [
- "Detailed",
- "solder screen"
- ],
- "desc": "Vis detialieret information mens der loddes"
- },
"ScrollingSpeed": {
"text2": [
"Scrolling",
@@ -210,89 +224,89 @@ ],
"desc": "Speed info text scrolls past at (S=slow | F=fast)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "voltage"
+ "Swap",
+ "+ - keys"
],
- "desc": "Max QC voltage the iron should negotiate for"
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Detailed",
+ "idle screen"
],
- "desc": "Intensity of power of keep-awake-pulse (watt)"
+ "desc": "Vis detialieret information med en mindre skriftstørrelse på standby skærmen."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Detailed",
+ "solder screen"
],
- "desc": "Sensitivity to magnets (0=Slukket | 1=Mindst følsom | ... | 9=Mest følsom)"
+ "desc": "Vis detialieret information mens der loddes"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Calibrate",
+ "input voltage?"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "VIN kalibrering. Knapperne justere, Lang tryk for at gå ud"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Restore default",
+ "settings"
+ ],
+ "desc": "Gendan alle indstillinger"
+ },
"LanguageSwitch": {
"text2": [
"Sprog :",
" DA Dansk"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_DE.json b/Translations/translation_DE.json index b78f5c90..270f94f1 100644 --- a/Translations/translation_DE.json +++ b/Translations/translation_DE.json @@ -105,6 +105,69 @@ ],
"desc": "Spannungsquelle (Abschaltspannung) (DC=10V | nS=n*3.3V für n LiIon-Zellen)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimale",
+ "Spannung"
+ ],
+ "desc": "Minimal zulässige Spannung pro Zelle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Spannungs-",
+ "maximum"
+ ],
+ "desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung (V=Volt)"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD Abfragedauer in 100ms Schritten (Kompatibilität mit best. QC-Ladegeräten)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost-",
+ "temperatur"
+ ],
+ "desc": "Temperatur der Lötspitze im Boostmodus"
+ },
+ "AutoStart": {
+ "text2": [
+ "Start im",
+ "Lötmodus"
+ ],
+ "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp-Schritt",
+ "Druck kurz"
+ ],
+ "desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp-Schritt",
+ "Druck lang"
+ ],
+ "desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
+ },
+ "LockingMode": {
+ "text2": [
+ "Tasten-",
+ "sperre"
+ ],
+ "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Bewegungs-",
+ "empfindlichk."
+ ],
+ "desc": "0=aus | 1=minimal | ... | 9=maximal"
+ },
"SleepTemperature": {
"text2": [
"Ruhe-",
@@ -126,12 +189,12 @@ ],
"desc": "Dauer vor automatischer Abschaltung (m=Minuten)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Bewegungs-",
- "empfindlichk."
+ "Empfindlichkeit",
+ "der Hall-Sonde"
],
- "desc": "0=aus | 1=minimal | ... | 9=maximal"
+ "desc": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (0=aus | 1=minimal | ... | 9=maximal)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "C=°Celsius | F=°Fahrenheit"
},
- "AdvancedIdle": {
- "text2": [
- "Detaillierte",
- "Ruheansicht"
- ],
- "desc": "Detaillierte Anzeige im Ruhemodus"
- },
"DisplayRotation": {
"text2": [
"Anzeige-",
@@ -154,20 +210,6 @@ ],
"desc": "R=rechtshändig | L=linkshändig | A=automatisch"
},
- "BoostTemperature": {
- "text2": [
- "Boost-",
- "temperatur"
- ],
- "desc": "Temperatur der Lötspitze im Boostmodus"
- },
- "AutoStart": {
- "text2": [
- "Start im",
- "Lötmodus"
- ],
- "desc": "Heizverhalten beim Einschalten der Spannungsversorgung (A=aus | L=Lötmodus | R=Ruhemodus | K=Ruhemodus mit kalter Spitze)"
- },
"CooldownBlink": {
"text2": [
"Abkühl-",
@@ -175,34 +217,6 @@ ],
"desc": "Temperaturanzeige blinkt beim Abkühlen, solange Spitze heiß ist"
},
- "CalibrateCJC": {
- "text2": [
- "Temperatur",
- "kalibrieren?"
- ],
- "desc": "Kalibrierung der Kaltstellenkompensation beim nächsten Start (nicht nötig wenn Delta T < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Einstellungen",
- "zurücksetzen?"
- ],
- "desc": "Werte auf Werkseinstellungen zurücksetzen"
- },
- "VoltageCalibration": {
- "text2": [
- "Eingangsspannung",
- "kalibrieren?"
- ],
- "desc": "Kalibrierung der Eingangsspannung (Langer Tastendruck zum Verlassen)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Detaillierte",
- "Lötansicht"
- ],
- "desc": "Detaillierte Anzeige im Lötmodus"
- },
"ScrollingSpeed": {
"text2": [
"Scroll-",
@@ -210,89 +224,89 @@ ],
"desc": "Scrollgeschwindigkeit der Erläuterungen (L=langsam | S=schnell)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Spannungs-",
- "maximum"
+ "+- Tasten",
+ "umkehren?"
],
- "desc": "Maximal zulässige Spannung der verwendeten Spannungsversorgung (V=Volt)"
+ "desc": "Tastenbelegung zur Temperaturänderung umkehren"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "Geschw."
],
- "desc": "PD Abfragedauer in 100ms Schritten (Kompatibilität mit best. QC-Ladegeräten)"
+ "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Leistungs-",
- "maximum"
+ "Anim.",
+ "Schleife"
],
- "desc": "Maximal zulässige Leistungsaufnahme des Lötkolbens (W=Watt)"
+ "desc": "Icon-Animationen im Hauptmenü wiederholen"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "+- Tasten",
- "umkehren?"
+ "Bildschirm-",
+ "kontrast"
],
- "desc": "Tastenbelegung zur Temperaturänderung umkehren"
+ "desc": "Verändert die Helligkeit des OLED-Displays"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp-Schritt",
- "Druck kurz"
+ "Farben",
+ "umkehren"
],
- "desc": "Schrittweite für Temperaturwechsel bei kurzem Tastendruck"
+ "desc": "Invertiert die Farben des OLED-Displays"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp-Schritt",
- "Druck lang"
+ "Startlogo-",
+ "dauer"
],
- "desc": "Schrittweite für Temperaturwechsel bei langem Tastendruck"
+ "desc": "Legt die Dauer der Anzeige des Startlogos fest (s=Sekunden)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Leistungs-",
- "impuls"
+ "Detaillierte",
+ "Ruheansicht"
],
- "desc": "Powerbank mit einem Impuls wach halten (Watt)"
+ "desc": "Detaillierte Anzeige im Ruhemodus"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Empfindlichkeit",
- "der Hall-Sonde"
+ "Detaillierte",
+ "Lötansicht"
],
- "desc": "Empfindlichkeit der Hall-Sonde um den Ruhemodus auszulösen (0=aus | 1=minimal | ... | 9=maximal)"
+ "desc": "Detaillierte Anzeige im Lötmodus"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Tasten-",
- "sperre"
+ "Leistungs-",
+ "maximum"
],
- "desc": "Langes drücken beider Tasten im Lötmodus sperrt diese (A=aus | B=nur Boost | V=vollständig)"
+ "desc": "Maximal zulässige Leistungsaufnahme des Lötkolbens (W=Watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimale",
- "Spannung"
+ "Temperatur",
+ "kalibrieren?"
],
- "desc": "Minimal zulässige Spannung pro Zelle (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ "desc": "Kalibrierung der Kaltstellenkompensation beim nächsten Start (nicht nötig wenn Delta T < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "Schleife"
+ "Eingangsspannung",
+ "kalibrieren?"
],
- "desc": "Icon-Animationen im Hauptmenü wiederholen"
+ "desc": "Kalibrierung der Eingangsspannung (Langer Tastendruck zum Verlassen)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "Geschw."
+ "Leistungs-",
+ "impuls"
],
- "desc": "Geschwindigkeit der Icon-Animationen im Menü (A=aus | L=langsam | M=mittel | S=schnell)"
+ "desc": "Powerbank mit einem Impuls wach halten (Watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Dauer des Wachhalteimpulses (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Einstellungen",
+ "zurücksetzen?"
+ ],
+ "desc": "Werte auf Werkseinstellungen zurücksetzen"
+ },
"LanguageSwitch": {
"text2": [
"Sprache:",
" DE Deutsch"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Bildschirm-",
- "kontrast"
- ],
- "desc": "Verändert die Helligkeit des OLED-Displays"
- },
- "ColourInversion": {
- "text2": [
- "Farben",
- "umkehren"
- ],
- "desc": "Invertiert die Farben des OLED-Displays"
- },
- "LOGOTime": {
- "text2": [
- "Startlogo-",
- "dauer"
- ],
- "desc": "Legt die Dauer der Anzeige des Startlogos fest (s=Sekunden)"
}
}
}
diff --git a/Translations/translation_EL.json b/Translations/translation_EL.json index 0794580a..64bb8fd9 100644 --- a/Translations/translation_EL.json +++ b/Translations/translation_EL.json @@ -108,6 +108,69 @@ ],
"desc": "Πηγή ενέργειας. Oρισμός τάσης απενεργοποίησης. (DC 10V) (S 3.3V ανα κυψέλη, απενεργοποίηση ενεργειακού ορίου)"
},
+ "MinVolCell": {
+ "text2": [
+ "Ελάχιστη",
+ "τάση"
+ ],
+ "desc": "Ελάχιστη επιτρεπτή τάση ανα κυψέλη (3 σε σειρά: 3 - 3.7V | 4-6 σε σειρά: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Τάση",
+ "QC"
+ ],
+ "desc": "Μέγιστη τάση QC που να ζητά το κολλητήρι από το τροφοδοτικό"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "χρονικό όριο",
+ "PD"
+ ],
+ "desc": "Χρονικό όριο διαπραγμάτευσης PD σε βήματα 100ms για συμβατότητα με κάποιους φορτιστές QC"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Θερμοκ.",
+ "boost"
+ ],
+ "desc": "Θερμοκρασία στη \"λειτουργία boost\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Ζέσταμα",
+ "κατά την εν."
+ ],
+ "desc": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Αλλαγή θερμοκ.",
+ "στιγμιαίο"
+ ],
+ "desc": "Βήμα αλλαγής θερμοκρασίας σε στιγμιαίο πάτημα πλήκτρου"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Αλλαγή θερμοκ.",
+ "παρατεταμένο"
+ ],
+ "desc": "Βήμα αλλαγής θερμοκρασίας σε παρατεταμένο πάτημα πλήκτρου"
+ },
+ "LockingMode": {
+ "text2": [
+ "Κλείδωμα",
+ "πλήκτρων"
+ ],
+ "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Ευαισθησία",
+ "κίνησης"
+ ],
+ "desc": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο"
+ },
"SleepTemperature": {
"text2": [
"Θερμοκρ.",
@@ -129,12 +192,12 @@ ],
"desc": "Χρονικό διάστημα πρίν την απενεργοποίηση του κολλητηριού (Λ=λεπτά)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Ευαισθησία",
- "κίνησης"
+ "Ευαισθ. αισθ. ",
+ "φαιν. Hall"
],
- "desc": "0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο"
+ "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)"
},
"TemperatureUnit": {
"text2": [
@@ -143,13 +206,6 @@ ],
"desc": "C=Κελσίου | F=Φαρενάιτ"
},
- "AdvancedIdle": {
- "text2": [
- "Λεπτομερής",
- "οθ. αδράνειας"
- ],
- "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη αδράνειας"
- },
"DisplayRotation": {
"text2": [
"Διάταξη",
@@ -157,20 +213,6 @@ ],
"desc": "R=δεξιόχειρες | L=αριστερόχειρες | Α=αυτόματο"
},
- "BoostTemperature": {
- "text2": [
- "Θερμοκ.",
- "boost"
- ],
- "desc": "Θερμοκρασία στη \"λειτουργία boost\""
- },
- "AutoStart": {
- "text2": [
- "Ζέσταμα",
- "κατά την εν."
- ],
- "desc": "0=off | Κ=θερμ. κόλλησης | Z=αναμονή σε θερμοκρασία ύπνου μέχρι την κίνηση | Υ=αναμονή χωρίς ζέσταμα μέχρι την κίνηση"
- },
"CooldownBlink": {
"text2": [
"Αναβοσβήσιμο",
@@ -178,34 +220,6 @@ ],
"desc": "Αναβοσβήσιμο της ενδειξης θερμοκρασίας κατά την παύση θέρμανσης όταν η μύτη είναι ακόμα καυτή"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
- },
- "SettingsReset": {
- "text2": [
- "Επαναφορά",
- "εργ. ρυθμίσεων;"
- ],
- "desc": "Επαναφορά στις προεπιλεγμένες ρυθμίσεις"
- },
- "VoltageCalibration": {
- "text2": [
- "Βαθμονόμηση",
- "τάσης εισόδου;"
- ],
- "desc": "Έναρξη βαθμονόμησης τάσης εισόδου (κράτημα για έξοδο)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Λεπτομερής",
- "οθ. κόλλησης"
- ],
- "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη κόλλησης"
- },
"ScrollingSpeed": {
"text2": [
"Ταχύτητα",
@@ -213,89 +227,89 @@ ],
"desc": "Ταχύτητα κύλισης κειμένου (Α=αργά | Γ=γρήγορα)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Τάση",
- "QC"
+ "Αντιστροφή",
+ "πλήκτρων + -"
],
- "desc": "Μέγιστη τάση QC που να ζητά το κολλητήρι από το τροφοδοτικό"
+ "desc": "Αντιστροφή διάταξης πλήκτρων στη ρύθμιση θερμοκρασίας"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "χρονικό όριο",
- "PD"
+ "Ταχύτητα",
+ "κιν. εικονιδ."
],
- "desc": "Χρονικό όριο διαπραγμάτευσης PD σε βήματα 100ms για συμβατότητα με κάποιους φορτιστές QC"
+ "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Ενεργειακό",
- "όριο"
+ "Επανάληψη",
+ "κιν. εικονιδ."
],
- "desc": "Μέγιστη ενέργεια που μπορεί να χρησιμοποιεί το κολλητήρι (W=watt)"
+ "desc": "Επανάληψη κίνησης εικονιδίων στο αρχικό μενού"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Αντιστροφή",
- "πλήκτρων + -"
+ "Αντίθεση",
+ "οθόνης"
],
- "desc": "Αντιστροφή διάταξης πλήκτρων στη ρύθμιση θερμοκρασίας"
+ "desc": "Ρύθμιση φωτεινότητας οθόνης OLED"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Αλλαγή θερμοκ.",
- "στιγμιαίο"
+ "Αντιστροφή",
+ "χρωμάτων"
],
- "desc": "Βήμα αλλαγής θερμοκρασίας σε στιγμιαίο πάτημα πλήκτρου"
+ "desc": "Αντιστροφή χρωμάτων οθόνης OLED"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Αλλαγή θερμοκ.",
- "παρατεταμένο"
+ "Boot logo",
+ "duration"
],
- "desc": "Βήμα αλλαγής θερμοκρασίας σε παρατεταμένο πάτημα πλήκτρου"
+ "desc": "Sets the duration for the boot logo (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Παλμός",
- "ενέργειας"
+ "Λεπτομερής",
+ "οθ. αδράνειας"
],
- "desc": "Ένταση ενέργειας παλμού διατήρησης λειτουργίας (W=watt)"
+ "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη αδράνειας"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Ευαισθ. αισθ. ",
- "φαιν. Hall"
+ "Λεπτομερής",
+ "οθ. κόλλησης"
],
- "desc": "Ευαισθησία του αισθητήρα φαινομένου Hall για εντοπισμό αδράνειας (0=off | 1=λιγότερο ευαίσθητο | ... | 9=περισσότερο ευαίσθητο)"
+ "desc": "Προβολή λεπτομερών πληροφοριών σε μικρότερη γραμματοσειρά στην οθόνη κόλλησης"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Κλείδωμα",
- "πλήκτρων"
+ "Ενεργειακό",
+ "όριο"
],
- "desc": "Κατά την κόλληση, κρατήστε και τα δύο πλήκτρα για κλείδωμα (A=απενεργοποίηση | B=μόνο λειτ. boost | Π=πλήρες κλείδωμα)"
+ "desc": "Μέγιστη ενέργεια που μπορεί να χρησιμοποιεί το κολλητήρι (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Ελάχιστη",
- "τάση"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Ελάχιστη επιτρεπτή τάση ανα κυψέλη (3 σε σειρά: 3 - 3.7V | 4-6 σε σειρά: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Επανάληψη",
- "κιν. εικονιδ."
+ "Βαθμονόμηση",
+ "τάσης εισόδου;"
],
- "desc": "Επανάληψη κίνησης εικονιδίων στο αρχικό μενού"
+ "desc": "Έναρξη βαθμονόμησης τάσης εισόδου (κράτημα για έξοδο)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Ταχύτητα",
- "κιν. εικονιδ."
+ "Παλμός",
+ "ενέργειας"
],
- "desc": "Ρυθμός κίνησης εικονιδίων στο μενού (0=off | Α=αργός | Μ=μέτριος | Γ=γρήγορος)"
+ "desc": "Ένταση ενέργειας παλμού διατήρησης λειτουργίας (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -311,33 +325,19 @@ ],
"desc": "Διάρκεια παλμού διατήρησης ενέργειας (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Επαναφορά",
+ "εργ. ρυθμίσεων;"
+ ],
+ "desc": "Επαναφορά στις προεπιλεγμένες ρυθμίσεις"
+ },
"LanguageSwitch": {
"text2": [
"Γλώσσα",
" GR Ελληνικά"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Αντίθεση",
- "οθόνης"
- ],
- "desc": "Ρύθμιση φωτεινότητας οθόνης OLED"
- },
- "ColourInversion": {
- "text2": [
- "Αντιστροφή",
- "χρωμάτων"
- ],
- "desc": "Αντιστροφή χρωμάτων οθόνης OLED"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Sets the duration for the boot logo (s=seconds)"
}
}
}
diff --git a/Translations/translation_EN.json b/Translations/translation_EN.json index bd04cc95..949b43f1 100644 --- a/Translations/translation_EN.json +++ b/Translations/translation_EN.json @@ -2,7 +2,8 @@ "languageCode": "EN",
"languageLocalName": "English",
"fonts": [
- "ascii_basic"
+ "ascii_basic",
+ "latin_extended"
],
"tempUnitFahrenheit": true,
"messages": {
@@ -65,35 +66,35 @@ "Power",
"settings"
],
- "desc": ""
+ "desc": "Power settings"
},
"SolderingMenu": {
"text2": [
"Soldering",
"settings"
],
- "desc": ""
+ "desc": "Soldering settings"
},
"PowerSavingMenu": {
"text2": [
"Sleep",
"mode"
],
- "desc": ""
+ "desc": "Power saving settings"
},
"UIMenu": {
"text2": [
"User",
"interface"
],
- "desc": ""
+ "desc": "User interface settings"
},
"AdvancedMenu": {
"text2": [
"Advanced",
"settings"
],
- "desc": ""
+ "desc": "Advanced settings"
}
},
"menuOptions": {
@@ -104,6 +105,69 @@ ],
"desc": "Set cutoff voltage to prevent battery overdrainage (DC 10V) (S=3.3V per cell, disable PWR limit)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "voltage"
+ ],
+ "desc": "Max QC voltage the iron should negotiate for"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost",
+ "temp"
+ ],
+ "desc": "Tip temperature used in \"boost mode\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Start-up",
+ "behavior"
+ ],
+ "desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp change",
+ "short"
+ ],
+ "desc": "Temperature-change-increment on short button press"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Motion",
+ "sensitivity"
+ ],
+ "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
+ },
"SleepTemperature": {
"text2": [
"Sleep",
@@ -125,26 +189,19 @@ ],
"desc": "Interval before the iron shuts down (m=minutes)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Motion",
+ "Hall sensor",
"sensitivity"
],
- "desc": "0=off | 1=least sensitive | ... | 9=most sensitive"
+ "desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
},
"TemperatureUnit": {
"text2": [
"Temperature",
"unit"
],
- "desc": "C=Celsius | F=Fahrenheit"
- },
- "AdvancedIdle": {
- "text2": [
- "Detailed",
- "idle screen"
- ],
- "desc": "Display detailed info in a smaller font on idle screen"
+ "desc": "C=°Celsius | F=°Fahrenheit"
},
"DisplayRotation": {
"text2": [
@@ -153,20 +210,6 @@ ],
"desc": "R=right-handed | L=left-handed | A=automatic"
},
- "BoostTemperature": {
- "text2": [
- "Boost",
- "temp"
- ],
- "desc": "Tip temperature used in \"boost mode\""
- },
- "AutoStart": {
- "text2": [
- "Start-up",
- "behavior"
- ],
- "desc": "O=off | S=heat to soldering temp | Z=standby at sleep temp until moved | R=standby without heating until moved"
- },
"CooldownBlink": {
"text2": [
"Cooldown",
@@ -174,34 +217,6 @@ ],
"desc": "Flash temp reading at idle while tip is hot"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
- },
- "SettingsReset": {
- "text2": [
- "Restore default",
- "settings"
- ],
- "desc": "Reset all settings to default"
- },
- "VoltageCalibration": {
- "text2": [
- "Calibrate",
- "input voltage"
- ],
- "desc": "Start VIN calibration (long press to exit)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Detailed",
- "solder screen"
- ],
- "desc": "Display detailed info in a smaller font on soldering screen"
- },
"ScrollingSpeed": {
"text2": [
"Scrolling",
@@ -209,89 +224,89 @@ ],
"desc": "Speed info text scrolls past at (S=slow | F=fast)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "voltage"
+ "Swap",
+ "+ - keys"
],
- "desc": "Max QC voltage the iron should negotiate for"
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (off | s=seconds | infinity)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Detailed",
+ "idle screen"
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Display detailed info in a smaller font on idle screen"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Detailed",
+ "solder screen"
],
- "desc": "Sensitivity to magnets (0=off | 1=least sensitive | ... | 9=most sensitive)"
+ "desc": "Display detailed info in a smaller font on soldering screen"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Calibrate",
+ "input voltage"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Start VIN calibration (long press to exit)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (watt)"
},
"PowerPulseWait": {
"text2": [
@@ -307,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
- "LanguageSwitch": {
- "text2": [
- "Language:",
- " EN English"
- ],
- "desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
+ "SettingsReset": {
"text2": [
- "Invert",
- "screen"
+ "Restore default",
+ "settings"
],
- "desc": "Invert the OLED screen colors"
+ "desc": "Reset all settings to default"
},
- "LOGOTime": {
+ "LanguageSwitch": {
"text2": [
- "Boot logo",
- "duration"
+ "Language:",
+ " EN English"
],
- "desc": "Set boot logo duration (s=seconds)"
+ "desc": "Current firmware language"
}
}
}
diff --git a/Translations/translation_ES.json b/Translations/translation_ES.json index 8c5b1c49..f82195c2 100644 --- a/Translations/translation_ES.json +++ b/Translations/translation_ES.json @@ -105,6 +105,69 @@ ],
"desc": "Elige el tipo de fuente para limitar el voltaje (DC 10V) (S 3,3V por pila, ilimitado)"
},
+ "MinVolCell": {
+ "text2": [
+ "Mínimo",
+ "voltaje"
+ ],
+ "desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Potencia de",
+ "entrada"
+ ],
+ "desc": "Potencia en vatios del adaptador de corriente utilizado."
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Ajustar la",
+ "temp. extra"
+ ],
+ "desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
+ },
+ "AutoStart": {
+ "text2": [
+ "Calentar",
+ "al enchufar"
+ ],
+ "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Cambio temp.",
+ "puls. cortas"
+ ],
+ "desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Cambio temp.",
+ "puls. largas"
+ ],
+ "desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
+ },
+ "LockingMode": {
+ "text2": [
+ "Permitir botones",
+ "bloqueo"
+ ],
+ "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Detección de",
+ "movimiento"
+ ],
+ "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
+ },
"SleepTemperature": {
"text2": [
"Temperatura",
@@ -126,12 +189,12 @@ ],
"desc": "Tiempo de inactividad para apagarse (en minutos)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Detección de",
- "movimiento"
+ "Hall Eff",
+ "Sensibilidad"
],
- "desc": "Tiempo de reacción al agarrar (0=no | 1=menos sensible | ... | 9=más sensible)"
+ "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Unidad de temperatura (C=centígrados | F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Info extra en",
- "modo reposo"
- ],
- "desc": "Muestra información detallada en letra pequeña al reposar."
- },
"DisplayRotation": {
"text2": [
"Orientación",
@@ -154,20 +210,6 @@ ],
"desc": "Orientación de la pantalla (D=diestro | I=zurdo | A=automático)"
},
- "BoostTemperature": {
- "text2": [
- "Ajustar la",
- "temp. extra"
- ],
- "desc": "Temperatura momentánea que se alcanza al apretar el botón del modo extra."
- },
- "AutoStart": {
- "text2": [
- "Calentar",
- "al enchufar"
- ],
- "desc": "Se calienta él solo al arrancar (N=no | S=entrar en modo soldar | R=solo entrar en reposo | F=en reposo pero mantiene la punta fría)"
- },
"CooldownBlink": {
"text2": [
"Parpadear",
@@ -175,34 +217,6 @@ ],
"desc": "La temperatura en pantalla parpadea mientras la punta siga caliente."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Volver a ajustes",
- "de fábrica"
- ],
- "desc": "Restablece todos los ajustes a los valores originales."
- },
- "VoltageCalibration": {
- "text2": [
- "Calibrar voltaje",
- "de entrada"
- ],
- "desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
- },
- "AdvancedSoldering": {
- "text2": [
- "Info extra",
- "al soldar"
- ],
- "desc": "Muestra más datos por pantalla cuando se está soldando."
- },
"ScrollingSpeed": {
"text2": [
"Velocidad",
@@ -210,89 +224,89 @@ ],
"desc": "Velocidad de desplazamiento del texto (R=rápida | L=lenta)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Potencia de",
- "entrada"
+ "Invertir",
+ "botones +/-"
],
- "desc": "Potencia en vatios del adaptador de corriente utilizado."
+ "desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "velocidad"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+ "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | R=high)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Ajustar la",
- "potenc. máx."
+ "Anim.",
+ "bucle"
],
- "desc": "Elige el límite de potencia máxima del soldador (en vatios)"
+ "desc": "Animaciones de iconos en bucle en el menú raíz"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Invertir",
- "botones +/-"
+ "Pantalla",
+ "brillo"
],
- "desc": "Intercambia las funciones de subir y bajar la temperatura de los botones +/- para que funcionen al revés."
+ "desc": "Ajusta el brillo de la pantalla OLED"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Cambio temp.",
- "puls. cortas"
+ "Invertir",
+ "pantalla"
],
- "desc": "Subir y bajar X grados de temperatura con cada pulsación corta de los botones +/-."
+ "desc": "Invertir la pantalla OLED"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Cambio temp.",
- "puls. largas"
+ "logo inicial",
+ "duración"
],
- "desc": "Subir y bajar X grados de temperatura con cada pulsación larga de los botones +/-."
+ "desc": "Duración de la animación del logo inicial (s=segundos)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Pulsos bat.",
- "constantes"
+ "Info extra en",
+ "modo reposo"
],
- "desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
+ "desc": "Muestra información detallada en letra pequeña al reposar."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall Eff",
- "Sensibilidad"
+ "Info extra",
+ "al soldar"
],
- "desc": "Sensibilidad del sensor de efecto Hall en la detección de reposo (0=no | 1=menos sensible | ... | 9=más sensible)"
+ "desc": "Muestra más datos por pantalla cuando se está soldando."
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Permitir botones",
- "bloqueo"
+ "Ajustar la",
+ "potenc. máx."
],
- "desc": "Al soldar, una pulsación larga en ambos botones los bloquea (D=desactivar | B=sólo potenciar | F=bloqueo total)."
+ "desc": "Elige el límite de potencia máxima del soldador (en vatios)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Mínimo",
- "voltaje"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "voltaje mínimo permitido por célula (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "bucle"
+ "Calibrar voltaje",
+ "de entrada"
],
- "desc": "Animaciones de iconos en bucle en el menú raíz"
+ "desc": "Calibra VIN. Ajusta con ambos botones y mantén pulsado para salir."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "velocidad"
+ "Pulsos bat.",
+ "constantes"
],
- "desc": "Velocidad de las animaciones de los iconos en el menú (O=off | L=low | M=medium | R=high)"
+ "desc": "Aplica unos pulsos necesarios para mantener encendidas ciertas baterías portátiles. En vatios."
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Duración del impulso de mantenimiento de la vigilia (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Volver a ajustes",
+ "de fábrica"
+ ],
+ "desc": "Restablece todos los ajustes a los valores originales."
+ },
"LanguageSwitch": {
"text2": [
"Idioma:",
" ES Castellano"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Pantalla",
- "brillo"
- ],
- "desc": "Ajusta el brillo de la pantalla OLED"
- },
- "ColourInversion": {
- "text2": [
- "Invertir",
- "pantalla"
- ],
- "desc": "Invertir la pantalla OLED"
- },
- "LOGOTime": {
- "text2": [
- "logo inicial",
- "duración"
- ],
- "desc": "Duración de la animación del logo inicial (s=segundos)"
}
}
}
diff --git a/Translations/translation_FI.json b/Translations/translation_FI.json index dd90df4d..fa80ec77 100644 --- a/Translations/translation_FI.json +++ b/Translations/translation_FI.json @@ -105,6 +105,69 @@ ],
"desc": "Virtalähde. Asettaa katkaisujännitteen. (DC 10V) (S 3.3V per kenno, poistaa virtarajoitukset)"
},
+ "MinVolCell": {
+ "text2": [
+ "Pienin",
+ "jännite"
+ ],
+ "desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "jännite"
+ ],
+ "desc": "Ensisijainen maksimi QC jännite"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Tehostus-",
+ "lämpötila"
+ ],
+ "desc": "Tehostustilan lämpötila"
+ },
+ "AutoStart": {
+ "text2": [
+ "Autom.",
+ "käynnistys"
+ ],
+ "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Lämmön muutos",
+ "lyhyt painal."
+ ],
+ "desc": "Lämpötilan muutos lyhyellä painalluksella"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Lämmön muutos",
+ "pitkä painal."
+ ],
+ "desc": "Lämpötilan muutos pitkällä painalluksella"
+ },
+ "LockingMode": {
+ "text2": [
+ "Salli nappien",
+ "lukitus"
+ ],
+ "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Liikkeen",
+ "herkkyys"
+ ],
+ "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
+ },
"SleepTemperature": {
"text2": [
"Lepotilan",
@@ -126,12 +189,12 @@ ],
"desc": "Automaattisen sammutuksen ajastus (m=minuuttia)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Liikkeen",
- "herkkyys"
+ "Hall-",
+ "herk."
],
- "desc": "0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys"
+ "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "C=celsius, F=fahrenheit"
},
- "AdvancedIdle": {
- "text2": [
- "Tiedot",
- "lepotilassa"
- ],
- "desc": "Näyttää yksityiskohtaisemmat pienemmällä fontilla tiedot lepotilassa."
- },
"DisplayRotation": {
"text2": [
"Näytön",
@@ -154,20 +210,6 @@ ],
"desc": "O=oikeakätinen | V=vasenkätinen | A=automaattinen"
},
- "BoostTemperature": {
- "text2": [
- "Tehostus-",
- "lämpötila"
- ],
- "desc": "Tehostustilan lämpötila"
- },
- "AutoStart": {
- "text2": [
- "Autom.",
- "käynnistys"
- ],
- "desc": "Käynnistää virrat kytkettäessä juotostilan automaattisesti. (E=Ei käytössä | J=juotostila | L=Lepotila | H=Lepotila huoneenlämpö)"
- },
"CooldownBlink": {
"text2": [
"Jäähdytyksen",
@@ -175,34 +217,6 @@ ],
"desc": "Vilkuttaa jäähtyessä juotoskärjen lämpötilaa sen ollessa vielä vaarallisen kuuma"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Palauta",
- "tehdasasetukset?"
- ],
- "desc": "Palauta kaikki asetukset oletusarvoihin"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibroi",
- "tulojännite?"
- ],
- "desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Tarkempi",
- "juotosnäyttö"
- ],
- "desc": "Näyttää yksityiskohtaisemmat tiedot pienellä fontilla juotostilassa"
- },
"ScrollingSpeed": {
"text2": [
"Selityksien",
@@ -210,89 +224,89 @@ ],
"desc": "Selityksien vieritysnopeus (H=hidas | N=nopea)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "jännite"
+ "Suunnanvaihto",
+ "+ - näppäimille"
],
- "desc": "Ensisijainen maksimi QC jännite"
+ "desc": "Lämpötilapainikkeiden suunnan vaihtaminen"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Animaation",
+ "nopeus"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Tehon-",
- "rajoitus"
+ "Animaation",
+ "toistaminen"
],
- "desc": "Suurin sallittu teho (Watti)"
+ "desc": "Toista animaatiot valikossa"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Suunnanvaihto",
- "+ - näppäimille"
+ "Screen",
+ "brightness"
],
- "desc": "Lämpötilapainikkeiden suunnan vaihtaminen"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Lämmön muutos",
- "lyhyt painal."
+ "Invert",
+ "screen"
],
- "desc": "Lämpötilan muutos lyhyellä painalluksella"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Lämmön muutos",
- "pitkä painal."
+ "Boot logo",
+ "duration"
],
- "desc": "Lämpötilan muutos pitkällä painalluksella"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Herätyspulssin",
- "voimakkuus"
+ "Tiedot",
+ "lepotilassa"
],
- "desc": "Herätyspulssin voimakkuus (Watti)"
+ "desc": "Näyttää yksityiskohtaisemmat pienemmällä fontilla tiedot lepotilassa."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall-",
- "herk."
+ "Tarkempi",
+ "juotosnäyttö"
],
- "desc": "Hall-efektianturin herkkyys lepotilan tunnistuksessa (0=pois päältä | 1=vähäinen herkkyys | ... | 9=suurin herkkyys)"
+ "desc": "Näyttää yksityiskohtaisemmat tiedot pienellä fontilla juotostilassa"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Salli nappien",
- "lukitus"
+ "Tehon-",
+ "rajoitus"
],
- "desc": "Kolvatessa paina molempia näppäimiä lukitaksesi ne (P=pois | V=vain tehostus | K=kaikki)"
+ "desc": "Suurin sallittu teho (Watti)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Pienin",
- "jännite"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Pienin sallittu jännite per kenno (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Animaation",
- "toistaminen"
+ "Kalibroi",
+ "tulojännite?"
],
- "desc": "Toista animaatiot valikossa"
+ "desc": "Tulojännitten kalibrointi (VIN) (paina pitkään poistuaksesi)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Animaation",
- "nopeus"
+ "Herätyspulssin",
+ "voimakkuus"
],
- "desc": "Animaatioiden nopeus valikossa (P=pois | A=alhainen | K=keskiverto | S=suuri)"
+ "desc": "Herätyspulssin voimakkuus (Watti)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Herätyspulssin kesto (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Palauta",
+ "tehdasasetukset?"
+ ],
+ "desc": "Palauta kaikki asetukset oletusarvoihin"
+ },
"LanguageSwitch": {
"text2": [
"Kieli:",
" FI Suomi"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_FR.json b/Translations/translation_FR.json index a7fc03ae..4c4d44b8 100644 --- a/Translations/translation_FR.json +++ b/Translations/translation_FR.json @@ -105,6 +105,69 @@ ],
"desc": "Source d'alimentation. Règle la tension de coupure (DC 10V) (S 3.3V par cellules, désactive la limite de puissance)"
},
+ "MinVolCell": {
+ "text2": [
+ "Tension",
+ "minimale"
+ ],
+ "desc": "Tension minimale autorisée par cellule (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Tension",
+ "QC"
+ ],
+ "desc": "Tension maximale désirée avec une alimentation QC"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "Délai",
+ "expir. PD"
+ ],
+ "desc": "Délai de la negociation PD par étapes de 100ms pour la compatiblité avec certains chargeurs QC"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Temp.",
+ "boost"
+ ],
+ "desc": "Température utilisée en \"mode boost\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Chauffer au",
+ "démarrage"
+ ],
+ "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Incrément",
+ "appui court"
+ ],
+ "desc": "Incrément de changement de température sur appui court"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Incrément",
+ "appui long"
+ ],
+ "desc": "Incrément de changement de température sur appui long"
+ },
+ "LockingMode": {
+ "text2": [
+ "Verrouiller",
+ "les boutons"
+ ],
+ "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Sensibilité",
+ "au mouvement"
+ ],
+ "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
+ },
"SleepTemperature": {
"text2": [
"Temp.",
@@ -126,12 +189,12 @@ ],
"desc": "Délai avant l'arrêt du fer à souder (m=minutes)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
"Sensibilité",
- "au mouvement"
+ "capteur effet hall"
],
- "desc": "0=désactivé | 1=peu sensible | ... | 9=très sensible"
+ "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "C=Celsius | F=Fahrenheit"
},
- "AdvancedIdle": {
- "text2": [
- "Écran veille",
- "détaillé"
- ],
- "desc": "Afficher les informations détaillées sur l'écran de veille"
- },
"DisplayRotation": {
"text2": [
"Orientation",
@@ -154,20 +210,6 @@ ],
"desc": "D=droitier | G=gaucher | A=automatique"
},
- "BoostTemperature": {
- "text2": [
- "Temp.",
- "boost"
- ],
- "desc": "Température utilisée en \"mode boost\""
- },
- "AutoStart": {
- "text2": [
- "Chauffer au",
- "démarrage"
- ],
- "desc": "D=désactivé | A=activé | V=mode veille | O=mode veille à température ambiante"
- },
"CooldownBlink": {
"text2": [
"Refroidir en",
@@ -175,34 +217,6 @@ ],
"desc": "Faire clignoter la température lors du refroidissement tant que la panne est chaude"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Réinitialisation",
- "d'usine"
- ],
- "desc": "Réinitialiser tous les réglages"
- },
- "VoltageCalibration": {
- "text2": [
- "Étalonner",
- "tension d'entrée"
- ],
- "desc": "Étalonner tension d'entrée (appui long pour quitter)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Écran soudure",
- "détaillé"
- ],
- "desc": "Afficher les informations détaillées sur l'écran de soudure"
- },
"ScrollingSpeed": {
"text2": [
"Vitesse de",
@@ -210,89 +224,89 @@ ],
"desc": "Vitesse de défilement du texte (R=rapide | L=lent)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Tension",
- "QC"
+ "Inverser les",
+ "touches + -"
],
- "desc": "Tension maximale désirée avec une alimentation QC"
+ "desc": "Inverser les boutons d'ajustement de température"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "Délai",
- "expir. PD"
+ "Vitesse",
+ "anim. icônes"
],
- "desc": "Délai de la negociation PD par étapes de 100ms pour la compatiblité avec certains chargeurs QC"
+ "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Limite de",
- "puissance"
+ "Rejouer",
+ "anim. icônes"
],
- "desc": "Puissance maximale utilisable (W=watts)"
+ "desc": "Rejouer en boucle les animations des icônes dans le menu principal"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Inverser les",
- "touches + -"
+ "Luminosité",
+ "de l'écran"
],
- "desc": "Inverser les boutons d'ajustement de température"
+ "desc": "Ajuster la luminosité de l'écran OLED"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Incrément",
- "appui court"
+ "Inverser",
+ "les couleurs"
],
- "desc": "Incrément de changement de température sur appui court"
+ "desc": "Inverser les couleurs de l'écran OLED"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Incrément",
- "appui long"
+ "Durée logo",
+ "au démarrage"
],
- "desc": "Incrément de changement de température sur appui long"
+ "desc": "Définit la durée d'affichage du logo au démarrage (s=secondes)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Puissance",
- "impulsions"
+ "Écran veille",
+ "détaillé"
],
- "desc": "Puissance des impulsions pour éviter la mise en veille des batteries (watts)"
+ "desc": "Afficher les informations détaillées sur l'écran de veille"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Sensibilité",
- "capteur effet hall"
+ "Écran soudure",
+ "détaillé"
],
- "desc": "Sensibilité du capteur à effet Hall pour la mise en veille (0=désactivé | 1=peu sensible | ... | 9=très sensible)"
+ "desc": "Afficher les informations détaillées sur l'écran de soudure"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Verrouiller",
- "les boutons"
+ "Limite de",
+ "puissance"
],
- "desc": "Pendant la soudure, appuyer sur les deux boutons pour les verrouiller (D=désactivé | B=boost seulement | V=verr. total)"
+ "desc": "Puissance maximale utilisable (W=watts)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Tension",
- "minimale"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Tension minimale autorisée par cellule (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Rejouer",
- "anim. icônes"
+ "Étalonner",
+ "tension d'entrée"
],
- "desc": "Rejouer en boucle les animations des icônes dans le menu principal"
+ "desc": "Étalonner tension d'entrée (appui long pour quitter)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Vitesse",
- "anim. icônes"
+ "Puissance",
+ "impulsions"
],
- "desc": "Vitesse des animations des icônes dans le menu (D=désactivé | L=lente | M=moyenne | R=rapide)"
+ "desc": "Puissance des impulsions pour éviter la mise en veille des batteries (watts)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Durée des impulsions pour empêcher la mise en veille (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Réinitialisation",
+ "d'usine"
+ ],
+ "desc": "Réinitialiser tous les réglages"
+ },
"LanguageSwitch": {
"text2": [
"Langue :",
" FR Français"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Luminosité",
- "de l'écran"
- ],
- "desc": "Ajuster la luminosité de l'écran OLED"
- },
- "ColourInversion": {
- "text2": [
- "Inverser",
- "les couleurs"
- ],
- "desc": "Inverser les couleurs de l'écran OLED"
- },
- "LOGOTime": {
- "text2": [
- "Durée logo",
- "au démarrage"
- ],
- "desc": "Définit la durée d'affichage du logo au démarrage (s=secondes)"
}
}
}
diff --git a/Translations/translation_HR.json b/Translations/translation_HR.json index 74485c78..dcf05e46 100644 --- a/Translations/translation_HR.json +++ b/Translations/translation_HR.json @@ -105,6 +105,69 @@ ],
"desc": "Izvor napajanja. Postavlja napon isključivanja. (DC 10V) (S 3.3V po ćeliji)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Snaga",
+ "napajanja"
+ ],
+ "desc": "Snaga modula za napajanje"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost",
+ "temp"
+ ],
+ "desc": "Temperatura u pojačanom (Boost) načinu."
+ },
+ "AutoStart": {
+ "text2": [
+ "Auto",
+ "start"
+ ],
+ "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp change",
+ "short"
+ ],
+ "desc": "Temperature-change-increment on short button press"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Osjetljivost",
+ "pokreta"
+ ],
+ "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+ },
"SleepTemperature": {
"text2": [
"Temp",
@@ -126,12 +189,12 @@ ],
"desc": "Vrijeme mirovanja nakon kojega će se lemilica ugasiti. (Minute)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Osjetljivost",
- "pokreta"
+ "Hall sensor",
+ "sensitivity"
],
- "desc": "Osjetljivost prepoznavanja pokreta. (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+ "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Jedinica temperature. (C=Celzij | F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Detalji",
- "pri čekanju"
- ],
- "desc": "Prikazivanje detaljnih informacija tijekom čekanja."
- },
"DisplayRotation": {
"text2": [
"Rotacija",
@@ -154,20 +210,6 @@ ],
"desc": "Orijentacija ekrana. (D=Desnoruki | L=Ljevoruki | A=Automatski)"
},
- "BoostTemperature": {
- "text2": [
- "Boost",
- "temp"
- ],
- "desc": "Temperatura u pojačanom (Boost) načinu."
- },
- "AutoStart": {
- "text2": [
- "Auto",
- "start"
- ],
- "desc": "Ako je aktivno, lemilica po uključivanju napajanja odmah počinje grijati. (I=isključeno | L=lemljenje | R=rezervni | S=rezervni sobna temperatura)"
- },
"CooldownBlink": {
"text2": [
"Upozorenje",
@@ -175,34 +217,6 @@ ],
"desc": "Bljeskanje temperature prilikom hlađenja, ako je lemilica vruća."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Tvorničke",
- "postavke"
- ],
- "desc": "Vraćanje svih postavki na tvorničke vrijednosti."
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibracija",
- "napona napajanja"
- ],
- "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
- },
- "AdvancedSoldering": {
- "text2": [
- "Detalji",
- "pri lemljenju"
- ],
- "desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
- },
"ScrollingSpeed": {
"text2": [
"Brzina",
@@ -210,89 +224,89 @@ ],
"desc": "Brzina kretanja dugačkih poruka. (B=brzo | S=sporo)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Snaga",
- "napajanja"
+ "Swap",
+ "+ - keys"
],
- "desc": "Snaga modula za napajanje"
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Detalji",
+ "pri čekanju"
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Prikazivanje detaljnih informacija tijekom čekanja."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Detalji",
+ "pri lemljenju"
],
- "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=Ugašeno | 1=Najmanje osjetljivo | ... | 9=Najosjetljivije)"
+ "desc": "Prikazivanje detaljnih informacija tijekom lemljenja."
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Kalibracija",
+ "napona napajanja"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Kalibracija ulaznog napona. Podešavanje gumbima, dugački pritisak za kraj."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Tvorničke",
+ "postavke"
+ ],
+ "desc": "Vraćanje svih postavki na tvorničke vrijednosti."
+ },
"LanguageSwitch": {
"text2": [
"Jezik:",
" HR Hrvatski"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_HU.json b/Translations/translation_HU.json index cc1f6392..3c8ad3e4 100644 --- a/Translations/translation_HU.json +++ b/Translations/translation_HU.json @@ -105,6 +105,69 @@ ],
"desc": "Kikapcsolási feszültség beállítása (DC:10V | S:3.3V/LiPo cella | ki)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "feszültség"
+ ],
+ "desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Max. USB",
+ "feszültség"
+ ],
+ "desc": "Maximális USB feszültség (QuickCharge)"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "időtúllépés"
+ ],
+ "desc": "PD egyeztetés időkerete (kompatibilitás QC töltőkkel) (x 100ms)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost",
+ "hőmérséklet"
+ ],
+ "desc": "Hőmérséklet \"boost\" módban"
+ },
+ "AutoStart": {
+ "text2": [
+ "Automatikus",
+ "indítás"
+ ],
+ "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Hőm. állítás",
+ "rövid"
+ ],
+ "desc": "Hőmérséklet állítás rövid gombnyomásra (C | F)"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Hőm. állítás",
+ "hosszú"
+ ],
+ "desc": "Hőmérséklet állítás hosszú gombnyomásra (C | F)"
+ },
+ "LockingMode": {
+ "text2": [
+ "Lezárás",
+ "engedélyezés"
+ ],
+ "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Mozgás",
+ "érzékenység"
+ ],
+ "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+ },
"SleepTemperature": {
"text2": [
"Alvási",
@@ -126,12 +189,12 @@ ],
"desc": "Kikapcsolási időzítő (perc)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Mozgás",
+ "Alvásérzékelő",
"érzékenység"
],
- "desc": "Mozgás érzékenység beállítása (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+ "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Hőmérséklet mértékegysége (C=Celsius | F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Részletes",
- "készenlét"
- ],
- "desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
- },
"DisplayRotation": {
"text2": [
"Kijelző",
@@ -154,20 +210,6 @@ ],
"desc": "Kijelző tájolása (J=jobbkezes | B=balkezes | A=automatikus)"
},
- "BoostTemperature": {
- "text2": [
- "Boost",
- "hőmérséklet"
- ],
- "desc": "Hőmérséklet \"boost\" módban"
- },
- "AutoStart": {
- "text2": [
- "Automatikus",
- "indítás"
- ],
- "desc": "Bekapcsolás után automatikusan lépjen forrasztás módba (K=ki | F=forrasztás | A=alvó mód | Sz=szobahőmérséklet)"
- },
"CooldownBlink": {
"text2": [
"Villogás",
@@ -175,34 +217,6 @@ ],
"desc": "Villogjon a hőmérséklet kijelzése hűlés közben, amíg a forrasztó hegy forró"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Gyári",
- "beállítások?"
- ],
- "desc": "Beállítások alaphelyzetbe állítása"
- },
- "VoltageCalibration": {
- "text2": [
- "Bemeneti fesz.",
- "kalibrálása?"
- ],
- "desc": "Bemeneti feszültség kalibrálása (hosszan nyomva kilép)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Részletes",
- "forrasztás infó"
- ],
- "desc": "Részletes információk megjelenítése forrasztás közben"
- },
"ScrollingSpeed": {
"text2": [
"Görgetés",
@@ -210,89 +224,89 @@ ],
"desc": "Szöveggörgetés sebessége"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Max. USB",
- "feszültség"
+ "+/- gomb",
+ "megfordítása"
],
- "desc": "Maximális USB feszültség (QuickCharge)"
+ "desc": "Forrasztó hegy hőmérsékletállító gombok felcserélése"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "időtúllépés"
+ "Animáció",
+ "sebessége"
],
- "desc": "PD egyeztetés időkerete (kompatibilitás QC töltőkkel) (x 100ms)"
+ "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Teljesítmény",
- "maximum"
+ "Folytonos",
+ "animáció"
],
- "desc": "Maximális felvett teljesitmény beállitása"
+ "desc": "Főmenü ikonjainak folytonos animációja"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "+/- gomb",
- "megfordítása"
+ "Képernyő",
+ "kontraszt"
],
- "desc": "Forrasztó hegy hőmérsékletállító gombok felcserélése"
+ "desc": "Képernyő kontrasztjának állítása"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Hőm. állítás",
- "rövid"
+ "Képernyő",
+ "invertálás"
],
- "desc": "Hőmérséklet állítás rövid gombnyomásra (C | F)"
+ "desc": "Képernyő színeinek invertálása"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Hőm. állítás",
- "hosszú"
+ "Boot logo",
+ "duration"
],
- "desc": "Hőmérséklet állítás hosszú gombnyomásra (C | F)"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Ébr. pulzus",
- "nagysága"
+ "Részletes",
+ "készenlét"
],
- "desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
+ "desc": "Részletes információk megjelenítése kisebb betűméretben a készenléti képernyőn"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Alvásérzékelő",
- "érzékenység"
+ "Részletes",
+ "forrasztás infó"
],
- "desc": "Alvásérzékelő gyorsulásmérő érzékenysége (0=kikapcsolva | 1=legkevésbé érzékeny | ... | 9=legérzékenyebb)"
+ "desc": "Részletes információk megjelenítése forrasztás közben"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Lezárás",
- "engedélyezés"
+ "Teljesítmény",
+ "maximum"
],
- "desc": "Forrasztás közben mindkét gombot hosszan lenyomva lezárja a kezelést (K=ki | B=csak \"boost\" módban | T=teljes lezárás)"
+ "desc": "Maximális felvett teljesitmény beállitása"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "feszültség"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimális engedélyezett cellafeszültség (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Folytonos",
- "animáció"
+ "Bemeneti fesz.",
+ "kalibrálása?"
],
- "desc": "Főmenü ikonjainak folytonos animációja"
+ "desc": "Bemeneti feszültség kalibrálása (hosszan nyomva kilép)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Animáció",
- "sebessége"
+ "Ébr. pulzus",
+ "nagysága"
],
- "desc": "Menüikonok animációjának sebessége (0=ki | L=lassú | K=közepes | Gy=gyors)"
+ "desc": "Powerbankot ébrentartó áramfelvételi pulzusok nagysága (W)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Powerbankot ébrentartó áramfelvételi pulzusok időtartama (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Gyári",
+ "beállítások?"
+ ],
+ "desc": "Beállítások alaphelyzetbe állítása"
+ },
"LanguageSwitch": {
"text2": [
"Nyelv:",
" HU Magyar"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Képernyő",
- "kontraszt"
- ],
- "desc": "Képernyő kontrasztjának állítása"
- },
- "ColourInversion": {
- "text2": [
- "Képernyő",
- "invertálás"
- ],
- "desc": "Képernyő színeinek invertálása"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 07329a50..23de31cb 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -105,6 +105,69 @@ ],
"desc": "Imposta una tensione minima di alimentazione attraverso la selezione di una sorgente [DC: 10 V; 3S/4S/5S/6S: 3,3 V per cella]"
},
+ "MinVolCell": {
+ "text2": [
+ "Tensione",
+ "min celle"
+ ],
+ "desc": "Modifica la tensione di minima carica delle celle di una batteria Li-Po [3S: 3,0-3,7 V; 4S/5S/6S: 2,4-3,7 V]"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Voltaggio",
+ "QC"
+ ],
+ "desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge [volt]"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "Abilitazione",
+ "USB PD"
+ ],
+ "desc": "Regola il massimo tempo utile per la negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Temp",
+ "Turbo"
+ ],
+ "desc": "Imposta la temperatura della funzione Turbo [°C/°F]"
+ },
+ "AutoStart": {
+ "text2": [
+ "Avvio",
+ "automatico"
+ ],
+ "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp passo",
+ "breve"
+ ],
+ "desc": "Imposta il passo dei valori di temperatura per una breve pressione dei tasti"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp passo",
+ "lungo"
+ ],
+ "desc": "Imposta il passo dei valori di temperatura per una lunga pressione dei tasti"
+ },
+ "LockingMode": {
+ "text2": [
+ "Blocco",
+ "tasti"
+ ],
+ "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Sensibilità",
+ "al movimento"
+ ],
+ "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+ },
"SleepTemperature": {
"text2": [
"Temp",
@@ -126,12 +189,12 @@ ],
"desc": "Imposta il timer per lo spegnimento [minuti]"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Sensibilità",
- "al movimento"
+ "Sensore",
+ "Hall"
],
- "desc": "Imposta la sensibilità al movimento per uscire dalla modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+ "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [0: nessuna; 1: minima; 9: massima]"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Scegli l'unità di misura per la temperatura [C: grado Celsius; F: grado Farenheit]"
},
- "AdvancedIdle": {
- "text2": [
- "Interfaccia",
- "testuale"
- ],
- "desc": "Mostra informazioni dettagliate all'interno della schermata principale"
- },
"DisplayRotation": {
"text2": [
"Orientamento",
@@ -154,20 +210,6 @@ ],
"desc": "Imposta l'orientamento dello schermo [D: mano destra; S: mano sinistra; A: automatico]"
},
- "BoostTemperature": {
- "text2": [
- "Temp",
- "Turbo"
- ],
- "desc": "Imposta la temperatura della funzione Turbo [°C/°F]"
- },
- "AutoStart": {
- "text2": [
- "Avvio",
- "automatico"
- ],
- "desc": "Attiva automaticamente il saldatore quando viene alimentato [D: disattiva; S: saldatura; R: riposo; A: temperatura ambiente]"
- },
"CooldownBlink": {
"text2": [
"Avviso",
@@ -175,34 +217,6 @@ ],
"desc": "Evidenzia il valore di temperatura durante il raffreddamento se la punta è ancora calda"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Ripristino",
- "impostazioni"
- ],
- "desc": "Ripristina le impostazioni allo stato iniziale"
- },
- "VoltageCalibration": {
- "text2": [
- "Calibrazione",
- "tensione"
- ],
- "desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
- },
- "AdvancedSoldering": {
- "text2": [
- "Dettagli",
- "saldatura"
- ],
- "desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
- },
"ScrollingSpeed": {
"text2": [
"Velocità",
@@ -210,89 +224,89 @@ ],
"desc": "Imposta la velocità di scorrimento del testo [L: lenta; V: veloce]"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Voltaggio",
- "QC"
+ "Inversione",
+ "tasti"
],
- "desc": "Imposta il massimo voltaggio negoziabile con un alimentatore Quick Charge [volt]"
+ "desc": "Inverti i tasti per aumentare o diminuire la temperatura della punta"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "Abilitazione",
- "USB PD"
+ "Velocità",
+ "animazioni"
],
- "desc": "Regola il massimo tempo utile per la negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]"
+ "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Limite",
- "potenza"
+ "Ciclo",
+ "animazioni"
],
- "desc": "Imposta il valore di potenza massima erogabile al saldatore [watt]"
+ "desc": "Abilita la riproduzione ciclica delle animazioni del menù principale"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Inversione",
- "tasti"
+ "Luminosità",
+ "schermo"
],
- "desc": "Inverti i tasti per aumentare o diminuire la temperatura della punta"
+ "desc": "Regola la luminosità dello schermo [1: minimo; 10: massimo]"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp passo",
- "breve"
+ "Inverti",
+ "colori"
],
- "desc": "Imposta il passo dei valori di temperatura per una breve pressione dei tasti"
+ "desc": "Inverti i colori dello schermo"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp passo",
- "lungo"
+ "Durata",
+ "logo"
],
- "desc": "Imposta il passo dei valori di temperatura per una lunga pressione dei tasti"
+ "desc": "Imposta la permanenza sullo schermo del logo iniziale [secondi]"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Potenza",
- "impulso"
+ "Interfaccia",
+ "testuale"
],
- "desc": "Regola la potenza di un \"impulso sveglia\" atto a prevenire lo standby eventuale dell'alimentatore [watt]"
+ "desc": "Mostra informazioni dettagliate all'interno della schermata principale"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Sensore",
- "Hall"
+ "Dettagli",
+ "saldatura"
],
- "desc": "Regola la sensibilità del sensore ad effetto Hall per entrare in modalità Riposo [0: nessuna; 1: minima; 9: massima]"
+ "desc": "Mostra informazioni dettagliate durante la modalità Saldatura"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Blocco",
- "tasti"
+ "Limite",
+ "potenza"
],
- "desc": "Blocca i tasti durante la modalità Saldatura; tieni premuto entrambi per bloccare o sbloccare [D: disattiva; T: consenti Turbo; C: blocco completo]"
+ "desc": "Imposta il valore di potenza massima erogabile al saldatore [watt]"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Tensione",
- "min celle"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Modifica la tensione di minima carica delle celle di una batteria Li-Po [3S: 3,0-3,7 V; 4S/5S/6S: 2,4-3,7 V]"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Ciclo",
- "animazioni"
+ "Calibrazione",
+ "tensione"
],
- "desc": "Abilita la riproduzione ciclica delle animazioni del menù principale"
+ "desc": "Calibra la tensione in ingresso; regola con entrambi i tasti, tieni premuto il tasto superiore per uscire"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Velocità",
- "animazioni"
+ "Potenza",
+ "impulso"
],
- "desc": "Imposta la velocità di riproduzione delle animazioni del menù principale [O: OFF; L: lenta; M: media; V: veloce]"
+ "desc": "Regola la potenza di un \"impulso sveglia\" atto a prevenire lo standby eventuale dell'alimentatore [watt]"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Regola la durata dell'«impulso sveglia» [multipli di 250 ms]"
},
+ "SettingsReset": {
+ "text2": [
+ "Ripristino",
+ "impostazioni"
+ ],
+ "desc": "Ripristina le impostazioni allo stato iniziale"
+ },
"LanguageSwitch": {
"text2": [
"Lingua:",
" IT Italiano"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Luminosità",
- "schermo"
- ],
- "desc": "Regola la luminosità dello schermo [1: minimo; 10: massimo]"
- },
- "ColourInversion": {
- "text2": [
- "Inverti",
- "colori"
- ],
- "desc": "Inverti i colori dello schermo"
- },
- "LOGOTime": {
- "text2": [
- "Durata",
- "logo"
- ],
- "desc": "Imposta la permanenza sullo schermo del logo iniziale [secondi]"
}
}
}
diff --git a/Translations/translation_JA_JP.json b/Translations/translation_JA_JP.json index f88c22e5..6e435695 100755 --- a/Translations/translation_JA_JP.json +++ b/Translations/translation_JA_JP.json @@ -75,6 +75,42 @@ "text2": "下限電圧",
"desc": "下限電圧を指定する <DC=10V | S=セルあたり3.3V、電力制限を無効化>"
},
+ "MinVolCell": {
+ "text2": "最低電圧",
+ "desc": "セルあたりの最低電圧 <ボルト> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+ },
+ "QCMaxVoltage": {
+ "text2": "QC電圧",
+ "desc": "QC電源使用時に要求する目標電圧"
+ },
+ "PDNegTimeout": {
+ "text2": "PD timeout",
+ "desc": "一部のQC電源との互換性のため、PDネゴシエーションをタイムアウトする時間 <x100ms（ミリ秒）>"
+ },
+ "BoostTemperature": {
+ "text2": "ブースト温度",
+ "desc": "ブーストモードで使用される温度"
+ },
+ "AutoStart": {
+ "text2": "自動加熱",
+ "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
+ },
+ "TempChangeShortStep": {
+ "text2": "温度変化 短",
+ "desc": "ボタンを短く押した時の温度変化値"
+ },
+ "TempChangeLongStep": {
+ "text2": "温度変化 長",
+ "desc": "ボタンを長押しした時の温度変化値"
+ },
+ "LockingMode": {
+ "text2": "ボタンロック",
+ "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
+ },
+ "MotionSensitivity": {
+ "text2": "動きの感度",
+ "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度"
+ },
"SleepTemperature": {
"text2": "待機温度",
"desc": "スタンバイ時のコテ先温度"
@@ -87,105 +123,74 @@ "text2": "自動オフ",
"desc": "自動電源オフまでの待機時間 <m=分>"
},
- "MotionSensitivity": {
- "text2": "動きの感度",
- "desc": "0=オフ | 1=最低感度 | ... | 9=最高感度"
+ "HallEffSensitivity": {
+ "text2": "磁界感度",
+ "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>"
},
"TemperatureUnit": {
"text2": "温度単位",
"desc": "C=摂氏 | F=華氏"
},
- "AdvancedIdle": {
- "text2": "詳細な待受画面",
- "desc": "待ち受け画面に詳細情報を表示する"
- },
"DisplayRotation": {
"text2": "画面の向き",
"desc": "右=右利き | 左=左利き | 自=自動"
},
- "BoostTemperature": {
- "text2": "ブースト温度",
- "desc": "ブーストモードで使用される温度"
- },
- "AutoStart": {
- "text2": "自動加熱",
- "desc": "電源投入時に自動的に加熱する <×=オフ | 熱=半田付けモード | 待=スタンバイモード | 室=室温スタンバイモード>"
- },
"CooldownBlink": {
"text2": "冷却中に点滅",
"desc": "加熱の停止後、コテ先が熱い間は温度表示を点滅する"
},
- "CalibrateCJC": {
- "text2": "Calibrate CJC",
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
+ "ScrollingSpeed": {
+ "text2": "スクロール速度",
+ "desc": "テキストをスクロールする速さ <遅=遅い | 速=速い>"
},
- "SettingsReset": {
- "text2": "設定をリセット",
- "desc": "すべての設定を初期化する"
+ "ReverseButtonTempChange": {
+ "text2": "キー入れ替え",
+ "desc": "温度設定時に+ボタンと-ボタンを入れ替える"
},
- "VoltageCalibration": {
- "text2": "電圧校正",
- "desc": "入力電圧(VIN)の校正を開始する <長押しで終了>"
+ "AnimSpeed": {
+ "text2": "動画の速度",
+ "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
},
- "AdvancedSoldering": {
- "text2": "詳細な作業画面",
- "desc": "半田付け画面に詳細情報を表示する"
+ "AnimLoop": {
+ "text2": "動画をループ",
+ "desc": "メニューアイコンのアニメーションをループする"
},
- "ScrollingSpeed": {
- "text2": "スクロール速度",
- "desc": "テキストをスクロールする速さ <遅=遅い | 速=速い>"
+ "Brightness": {
+ "text2": "画面輝度",
+ "desc": "画面の明るさ・コントラストを変更する"
},
- "QCMaxVoltage": {
- "text2": "QC電圧",
- "desc": "QC電源使用時に要求する目標電圧"
+ "ColourInversion": {
+ "text2": "色反転",
+ "desc": "画面の色を反転する"
},
- "PDNegTimeout": {
- "text2": [
- "PD",
- "timeout"
- ],
- "desc": "一部のQC電源との互換性のため、PDネゴシエーションをタイムアウトする時間 <x100ms（ミリ秒）>"
+ "LOGOTime": {
+ "text2": "Boot logo duration",
+ "desc": "Set boot logo duration (s=seconds)"
+ },
+ "AdvancedIdle": {
+ "text2": "詳細な待受画面",
+ "desc": "待ち受け画面に詳細情報を表示する"
+ },
+ "AdvancedSoldering": {
+ "text2": "詳細な作業画面",
+ "desc": "半田付け画面に詳細情報を表示する"
},
"PowerLimit": {
"text2": "電力制限",
"desc": "最大電力を制限する <W=ワット>"
},
- "ReverseButtonTempChange": {
- "text2": "キー入れ替え",
- "desc": "温度設定時に+ボタンと-ボタンを入れ替える"
- },
- "TempChangeShortStep": {
- "text2": "温度変化 短",
- "desc": "ボタンを短く押した時の温度変化値"
+ "CalibrateCJC": {
+ "text2": "Calibrate CJC",
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
},
- "TempChangeLongStep": {
- "text2": "温度変化 長",
- "desc": "ボタンを長押しした時の温度変化値"
+ "VoltageCalibration": {
+ "text2": "電圧校正",
+ "desc": "入力電圧(VIN)の校正を開始する <長押しで終了>"
},
"PowerPulsePower": {
"text2": "電力パルス",
"desc": "電源をオンに保つための電力パルス <ワット>"
},
- "HallEffSensitivity": {
- "text2": "磁界感度",
- "desc": "スタンバイモードに入るのに使用される磁場センサーの感度 <0=オフ | 1=最低感度 | ... | 9=最高感度>"
- },
- "LockingMode": {
- "text2": "ボタンロック",
- "desc": "半田付けモード時に両方のボタンを長押しし、ボタンロックする <×=オフ | ブ=ブーストのみ許可 | 全=すべてをロック>"
- },
- "MinVolCell": {
- "text2": "最低電圧",
- "desc": "セルあたりの最低電圧 <ボルト> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
- },
- "AnimLoop": {
- "text2": "動画をループ",
- "desc": "メニューアイコンのアニメーションをループする"
- },
- "AnimSpeed": {
- "text2": "動画の速度",
- "desc": "メニューアイコンのアニメーションの速さ <×=再生しない | 遅=低速 | 中=中速 | 速=高速>"
- },
"PowerPulseWait": {
"text2": "パルス間隔",
"desc": "電源をオンに保つための電力パルスの時間間隔 <x2.5s（秒）>"
@@ -194,21 +199,13 @@ "text2": "パルス時間長",
"desc": "電源をオンに保つための電力パルスの時間長 <x250ms（ミリ秒）>"
},
+ "SettingsReset": {
+ "text2": "設定をリセット",
+ "desc": "すべての設定を初期化する"
+ },
"LanguageSwitch": {
"text2": "言語： 日本語",
"desc": ""
- },
- "Brightness": {
- "text2": "画面輝度",
- "desc": "画面の明るさ・コントラストを変更する"
- },
- "ColourInversion": {
- "text2": "色反転",
- "desc": "画面の色を反転する"
- },
- "LOGOTime": {
- "text2": "Boot logo duration",
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_LT.json b/Translations/translation_LT.json index f46fdc56..259ff588 100644 --- a/Translations/translation_LT.json +++ b/Translations/translation_LT.json @@ -105,6 +105,69 @@ ],
"desc": "Išjungimo įtampa. (DC 10V) (arba celių [S] kiekis [3.3V per celę])"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimalus",
+ "voltažas"
+ ],
+ "desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC mait.",
+ "įtampa"
+ ],
+ "desc": "Maksimali QC maitinimo bloko įtampa"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "laikas"
+ ],
+ "desc": "PD suderinimo laikas žingsniais po 100ms suderinamumui su kai kuriais QC įkrovikliais"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Turbo",
+ "temperat."
+ ],
+ "desc": "Temperatūra turbo režimu"
+ },
+ "AutoStart": {
+ "text2": [
+ "Automatinis",
+ "paleidimas"
+ ],
+ "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp.keitim.",
+ "trump.spust."
+ ],
+ "desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp.keitim.",
+ "ilgas pasp."
+ ],
+ "desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką"
+ },
+ "LockingMode": {
+ "text2": [
+ "Mygtukų",
+ "užraktas"
+ ],
+ "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Judesio",
+ "jautrumas"
+ ],
+ "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+ },
"SleepTemperature": {
"text2": [
"Miego",
@@ -126,12 +189,12 @@ ],
"desc": "Išjungimo laikas (minutės)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Judesio",
- "jautrumas"
+ "Holo",
+ "jutiklis"
],
- "desc": "Judesio jautrumas (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+ "desc": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Temperatūros vienetai (C=Celsijus | F=Farenheitas)"
},
- "AdvancedIdle": {
- "text2": [
- "Detalus lau-",
- "kimo ekranas"
- ],
- "desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
- },
"DisplayRotation": {
"text2": [
"Ekrano",
@@ -154,20 +210,6 @@ ],
"desc": "Ekrano orientacija (D=Dešiniarankiams | K=Kairiarankiams | A=Automatinė)"
},
- "BoostTemperature": {
- "text2": [
- "Turbo",
- "temperat."
- ],
- "desc": "Temperatūra turbo režimu"
- },
- "AutoStart": {
- "text2": [
- "Automatinis",
- "paleidimas"
- ],
- "desc": "Ar pradėti kaitininti iš karto įjungus lituoklį (N=Ne | T=Taip | M=Miegas | K=Miegoti kambario temperatūroje)"
- },
"CooldownBlink": {
"text2": [
"Atvėsimo",
@@ -175,34 +217,6 @@ ],
"desc": "Ar mirksėti temperatūrą ekrane kol vėstantis antgalis vis dar karštas?"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Atstatyti",
- "nustatymus?"
- ],
- "desc": "Nustato nustatymus į numatytuosius"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibruoti",
- "įvesties įtampą?"
- ],
- "desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte."
- },
- "AdvancedSoldering": {
- "text2": [
- "Detalus lita-",
- "vimo ekranas"
- ],
- "desc": "Ar rodyti išsamią informaciją lituojant"
- },
"ScrollingSpeed": {
"text2": [
"Aprašymo",
@@ -210,89 +224,89 @@ ],
"desc": "Greitis, kuriuo šis tekstas slenka"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC mait.",
- "įtampa"
+ "Sukeisti + -",
+ "mygtukus?"
],
- "desc": "Maksimali QC maitinimo bloko įtampa"
+ "desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "laikas"
+ "Animacijų",
+ "greitis"
],
- "desc": "PD suderinimo laikas žingsniais po 100ms suderinamumui su kai kuriais QC įkrovikliais"
+ "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Galios",
- "riba"
+ "Animacijų",
+ "pakartojimas"
],
- "desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
+ "desc": "Leidžia kartoti animacijas be sustojimo pagrindiniame meniu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Sukeisti + -",
- "mygtukus?"
+ "Ekrano",
+ "šviesumas"
],
- "desc": "Sukeisti + - temperatūros keitimo mygtukus vietomis"
+ "desc": "Nustato OLED ekrano kontrastą/šviesumą."
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp.keitim.",
- "trump.spust."
+ "Ekrano",
+ "invertavimas"
],
- "desc": "Temperatūros keitimo žingsnis trumpai spustėlėjus mygtuką"
+ "desc": "Invertuoja OLED ekrano spalvas"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp.keitim.",
- "ilgas pasp."
+ "Boot logo",
+ "duration"
],
- "desc": "Temperatūros keitimo žingsnis ilgai paspaudus mygtuką"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Galios",
- "pulso W"
+ "Detalus lau-",
+ "kimo ekranas"
],
- "desc": "Periodinis galios pulso intensyvumas maitinblokiui, neleidžiantis jam užmigti."
+ "desc": "Ar rodyti papildomą informaciją mažesniu šriftu laukimo ekrane"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Holo",
- "jutiklis"
+ "Detalus lita-",
+ "vimo ekranas"
],
- "desc": "Holo jutiklio jautrumas nustatant miegą (0=Išjungta | 1=Mažiausias | ... | 9=Didžiausias)"
+ "desc": "Ar rodyti išsamią informaciją lituojant"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Mygtukų",
- "užraktas"
+ "Galios",
+ "riba"
],
- "desc": "Lituodami, ilgai paspauskite abu mygtukus, kad juos užrakintumėte (I=Išjungta | T=leidžiamas tik Turbo režimas | V=Visiškas užrakinimas)"
+ "desc": "Didžiausia galia, kurią gali naudoti lituoklis (Vatai)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimalus",
- "voltažas"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimalus voltažas, kuris yra leidžiamas kiekvienam baterijos elementui (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Animacijų",
- "pakartojimas"
+ "Kalibruoti",
+ "įvesties įtampą?"
],
- "desc": "Leidžia kartoti animacijas be sustojimo pagrindiniame meniu"
+ "desc": "Įvesties įtampos kalibravimas. Trumpai paspauskite, norėdami nustatyti, ilgai paspauskite, kad išeitumėte."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Animacijų",
- "greitis"
+ "Galios",
+ "pulso W"
],
- "desc": "Paveiksliukų animacijų greitis meniu punktuose (I=Išjungtas | L=Lėtas | V=Vidutinis | G=Greitas)"
+ "desc": "Periodinis galios pulso intensyvumas maitinblokiui, neleidžiantis jam užmigti."
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Galios pulso aktyvioji trukmė (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Atstatyti",
+ "nustatymus?"
+ ],
+ "desc": "Nustato nustatymus į numatytuosius"
+ },
"LanguageSwitch": {
"text2": [
"Kalba:",
" LT Lietuvių"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Ekrano",
- "šviesumas"
- ],
- "desc": "Nustato OLED ekrano kontrastą/šviesumą."
- },
- "ColourInversion": {
- "text2": [
- "Ekrano",
- "invertavimas"
- ],
- "desc": "Invertuoja OLED ekrano spalvas"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_NL.json b/Translations/translation_NL.json index 0a52b910..50b3e273 100644 --- a/Translations/translation_NL.json +++ b/Translations/translation_NL.json @@ -105,6 +105,69 @@ ],
"desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum toegestaan voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "Voltage"
+ ],
+ "desc": "Maximaal QC voltage dat gevraagd mag worden"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD afstemmingsduur in stappen van 100ms (voor compatibiliteit met sommige QC laders)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost",
+ "temp"
+ ],
+ "desc": "Punt temperatuur in boostmode"
+ },
+ "AutoStart": {
+ "text2": [
+ "Opstart",
+ "gedrag"
+ ],
+ "desc": "Gedrag bij opstarten (U=Uit | G=Gebruiks-temperatuur | S=Slaapstand-temperatuur tot beweging | B=Uit tot beweging)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp veranderen",
+ "kort"
+ ],
+ "desc": "Temperatuur verandering bij kort drukken"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp veranderen",
+ "lang"
+ ],
+ "desc": "Temperatuur verandering bij lang drukken"
+ },
+ "LockingMode": {
+ "text2": [
+ "Knopblokkering",
+ "inschakelen"
+ ],
+ "desc": "Tijdens solderen lang op beide knoppen drukken blokkeert de knoppen (U=Uit | B=Alleen boost mode | V=Volledig blokkeren)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Bewegings-",
+ "gevoeligheid"
+ ],
+ "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+ },
"SleepTemperature": {
"text2": [
"Slaap",
@@ -126,12 +189,12 @@ ],
"desc": "Tijd voordat soldeerbout automatisch uitschakelt (M=minuten)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Bewegings-",
+ "Hall sensor",
"gevoeligheid"
],
- "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+ "desc": "Gevoeligheid van de Hall effect sensor om naar slaapmodus te gaan (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Gedetailleerd",
- "startscherm"
- ],
- "desc": "Gedetailleerde informatie weergeven in een kleine letters op het startscherm."
- },
"DisplayRotation": {
"text2": [
"Scherm-",
@@ -154,20 +210,6 @@ ],
"desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
},
- "BoostTemperature": {
- "text2": [
- "Boost",
- "temp"
- ],
- "desc": "Punt temperatuur in boostmode"
- },
- "AutoStart": {
- "text2": [
- "Opstart",
- "gedrag"
- ],
- "desc": "Gedrag bij opstarten (U=Uit | G=Gebruiks-temperatuur | S=Slaapstand-temperatuur tot beweging | B=Uit tot beweging)"
- },
"CooldownBlink": {
"text2": [
"Afkoel",
@@ -175,34 +217,6 @@ ],
"desc": "Temperatuur laten flitsen in het hoofdmenu zo lang de punt nog warm is"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Instellingen",
- "resetten?"
- ],
- "desc": "Alle instellingen terugzetten naar fabrieksinstellingen"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibreer",
- "input-voltage?"
- ],
- "desc": "Start VIN Kalibratie (druk lang om te sluiten)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Gedetailleerd",
- "soldeerscherm"
- ],
- "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm"
- },
"ScrollingSpeed": {
"text2": [
"Scroll",
@@ -210,89 +224,89 @@ ],
"desc": "Snelheid waarmee de tekst scrolt (S=Snel | L=Langzaam)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "Voltage"
+ "Draai",
+ "+ - knoppen om"
],
- "desc": "Maximaal QC voltage dat gevraagd mag worden"
+ "desc": "Keer de +- knoppen van de temperatuurregeling om"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Animatie",
+ "snelheid"
],
- "desc": "PD afstemmingsduur in stappen van 100ms (voor compatibiliteit met sommige QC laders)"
+ "desc": "Tempo van de icoon animaties in het hoofdmenu (U=uit | L=langzaam | G=gemiddeld | S=snel)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Vermogen",
- "limiet"
+ "Animatie",
+ "herhaling"
],
- "desc": "Maximaal vermogen (W=Watt)"
+ "desc": "Herhaal icoon animaties in hoofdmenu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Draai",
- "+ - knoppen om"
+ "Scherm",
+ "helderheid"
],
- "desc": "Keer de +- knoppen van de temperatuurregeling om"
+ "desc": "Pas helderheid van het OLED scherm aan"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp veranderen",
- "kort"
+ "Inverteer",
+ "scherm"
],
- "desc": "Temperatuur verandering bij kort drukken"
+ "desc": "Inverteer de kleuren van het OLED scherm"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp veranderen",
- "lang"
+ "Opstart logo",
+ "duur"
],
- "desc": "Temperatuur verandering bij lang drukken"
+ "desc": "Stelt de weergaveduur van het opstartlogo in (s=seconden)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Stroom",
- "Puls"
+ "Gedetailleerd",
+ "startscherm"
],
- "desc": "Intensiteit van stroompuls om voeding aan te houden (watt)"
+ "desc": "Gedetailleerde informatie weergeven in een kleine letters op het startscherm."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "gevoeligheid"
+ "Gedetailleerd",
+ "soldeerscherm"
],
- "desc": "Gevoeligheid van de Hall effect sensor om naar slaapmodus te gaan (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+ "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Knopblokkering",
- "inschakelen"
+ "Vermogen",
+ "limiet"
],
- "desc": "Tijdens solderen lang op beide knoppen drukken blokkeert de knoppen (U=Uit | B=Alleen boost mode | V=Volledig blokkeren)"
+ "desc": "Maximaal vermogen (W=Watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum toegestaan voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Animatie",
- "herhaling"
+ "Kalibreer",
+ "input-voltage?"
],
- "desc": "Herhaal icoon animaties in hoofdmenu"
+ "desc": "Start VIN Kalibratie (druk lang om te sluiten)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Animatie",
- "snelheid"
+ "Stroom",
+ "Puls"
],
- "desc": "Tempo van de icoon animaties in het hoofdmenu (U=uit | L=langzaam | G=gemiddeld | S=snel)"
+ "desc": "Intensiteit van stroompuls om voeding aan te houden (watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Duur van voeding-wakker-blijf-pulsen (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Instellingen",
+ "resetten?"
+ ],
+ "desc": "Alle instellingen terugzetten naar fabrieksinstellingen"
+ },
"LanguageSwitch": {
"text2": [
"Taal:",
" NL Nederlands"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Scherm",
- "helderheid"
- ],
- "desc": "Pas helderheid van het OLED scherm aan"
- },
- "ColourInversion": {
- "text2": [
- "Inverteer",
- "scherm"
- ],
- "desc": "Inverteer de kleuren van het OLED scherm"
- },
- "LOGOTime": {
- "text2": [
- "Opstart logo",
- "duur"
- ],
- "desc": "Stelt de weergaveduur van het opstartlogo in (s=seconden)"
}
}
}
diff --git a/Translations/translation_NL_BE.json b/Translations/translation_NL_BE.json index d1cc9126..b648fd96 100644 --- a/Translations/translation_NL_BE.json +++ b/Translations/translation_NL_BE.json @@ -105,6 +105,69 @@ ],
"desc": "Spanningsbron. Stelt minimumspanning in. (DC 10V) (S 3.3V per cel)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Vermogen",
+ "Watt"
+ ],
+ "desc": "Vermogen van de adapter"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Verhogings",
+ "temp"
+ ],
+ "desc": "Verhogingstemperatuur"
+ },
+ "AutoStart": {
+ "text2": [
+ "Auto",
+ "start"
+ ],
+ "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp change",
+ "short"
+ ],
+ "desc": "Temperature-change-increment on short button press"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Bewegings-",
+ "gevoeligheid"
+ ],
+ "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+ },
"SleepTemperature": {
"text2": [
"Slaap",
@@ -126,12 +189,12 @@ ],
"desc": "Automatisch afsluiten time-out (Minuten)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Bewegings-",
- "gevoeligheid"
+ "Hall sensor",
+ "sensitivity"
],
- "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+ "desc": "Sensitivity to magnets (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Temperatuurschaal (°C=Celsius | °F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Gedetailleerd",
- "slaapscherm"
- ],
- "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
- },
"DisplayRotation": {
"text2": [
"Scherm-",
@@ -154,20 +210,6 @@ ],
"desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
},
- "BoostTemperature": {
- "text2": [
- "Verhogings",
- "temp"
- ],
- "desc": "Verhogingstemperatuur"
- },
- "AutoStart": {
- "text2": [
- "Auto",
- "start"
- ],
- "desc": "Breng de soldeerbout op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
- },
"CooldownBlink": {
"text2": [
"Afkoel",
@@ -175,34 +217,6 @@ ],
"desc": "Temperatuur knippert in hoofdmenu tijdens afkoeling."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Instellingen",
- "resetten?"
- ],
- "desc": "Alle instellingen resetten."
- },
- "VoltageCalibration": {
- "text2": [
- "Calibreer",
- "voedingsspanning?"
- ],
- "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
- },
- "AdvancedSoldering": {
- "text2": [
- "Gedetailleerd",
- "soldeerscherm"
- ],
- "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
- },
"ScrollingSpeed": {
"text2": [
"Scrol",
@@ -210,89 +224,89 @@ ],
"desc": "Scrolsnelheid van de tekst."
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Vermogen",
- "Watt"
+ "Swap",
+ "+ - keys"
],
- "desc": "Vermogen van de adapter"
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | T=slow | M=medium | S=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Gedetailleerd",
+ "slaapscherm"
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Gedetailleerde informatie in een kleiner lettertype in het slaapscherm."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Gedetailleerd",
+ "soldeerscherm"
],
- "desc": "Sensitivity to magnets (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
+ "desc": "Gedetailleerde informatie in kleiner lettertype in soldeerscherm."
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Calibreer",
+ "voedingsspanning?"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "VIN Calibreren. Bevestigen door knoppen lang in te drukken."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | T=slow | M=medium | S=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Instellingen",
+ "resetten?"
+ ],
+ "desc": "Alle instellingen resetten."
+ },
"LanguageSwitch": {
"text2": [
"Spraak:",
" NL_BE Vlaams"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_NO.json b/Translations/translation_NO.json index f26e8218..b4a902ee 100644 --- a/Translations/translation_NO.json +++ b/Translations/translation_NO.json @@ -105,103 +105,117 @@ ],
"desc": "Strømforsyning. Sett nedre spenning for automatisk nedstenging. (DC 10V) (S 3.3V per celle)"
},
- "SleepTemperature": {
+ "MinVolCell": {
"text2": [
- "DTmp",
- ""
+ "Minimum",
+ "voltage"
],
- "desc": "Dvaletemperatur (C)"
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
},
- "SleepTimeout": {
+ "QCMaxVoltage": {
"text2": [
- "DTid",
- ""
+ "QC",
+ "voltage"
],
- "desc": "Tid før dvale (Minutter | Sekunder)"
+ "desc": "Max QC voltage the iron should negotiate for"
},
- "ShutdownTimeout": {
+ "PDNegTimeout": {
"text2": [
- "AvTid",
- ""
+ "PD",
+ "timeout"
],
- "desc": "Tid før automatisk nedstenging (Minutter)"
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
},
- "MotionSensitivity": {
+ "BoostTemperature": {
"text2": [
- "BSensr",
+ "KTmp",
""
],
- "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+ "desc": "Temperatur i \"kraft-modus\""
},
- "TemperatureUnit": {
+ "AutoStart": {
"text2": [
- "TmpEnh",
+ "AStart",
""
],
- "desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
+ "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
},
- "AdvancedIdle": {
+ "TempChangeShortStep": {
"text2": [
- "AvDvSk",
- ""
+ "Temp change",
+ "short"
],
- "desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
+ "desc": "Temperature-change-increment on short button press"
},
- "DisplayRotation": {
+ "TempChangeLongStep": {
"text2": [
- "SkRetn",
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "BSensr",
""
],
- "desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
+ "desc": "Bevegelsesfølsomhet (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
},
- "BoostTemperature": {
+ "SleepTemperature": {
"text2": [
- "KTmp",
+ "DTmp",
""
],
- "desc": "Temperatur i \"kraft-modus\""
+ "desc": "Dvaletemperatur (C)"
},
- "AutoStart": {
+ "SleepTimeout": {
"text2": [
- "AStart",
+ "DTid",
""
],
- "desc": "Start automatisk med lodding når strøm kobles til. (I=Inaktiv | L=Lodding | D=Dvale | R=Dvale romtemperatur)"
+ "desc": "Tid før dvale (Minutter | Sekunder)"
},
- "CooldownBlink": {
+ "ShutdownTimeout": {
"text2": [
- "KjBlnk",
+ "AvTid",
""
],
- "desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
+ "desc": "Tid før automatisk nedstenging (Minutter)"
},
- "CalibrateCJC": {
+ "HallEffSensitivity": {
"text2": [
- "Calibrate CJC",
- "at next boot"
+ "Hall sensor",
+ "sensitivity"
],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
+ "desc": "Sensitivity to magnets (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
},
- "SettingsReset": {
+ "TemperatureUnit": {
"text2": [
- "TilbStl?",
+ "TmpEnh",
""
],
- "desc": "Tilbakestill alle innstillinger"
+ "desc": "Temperaturskala (C=Celsius | F=Fahrenheit)"
},
- "VoltageCalibration": {
+ "DisplayRotation": {
"text2": [
- "KalSpIn?",
+ "SkRetn",
""
],
- "desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
+ "desc": "Skjermretning (H=Høyrehendt | V=Venstrehendt | A=Automatisk)"
},
- "AdvancedSoldering": {
+ "CooldownBlink": {
"text2": [
- "AvLdSk",
+ "KjBlnk",
""
],
- "desc": "Vis detaljert informasjon ved lodding"
+ "desc": "Blink temperaturen på skjermen mens spissen fortsatt er varm."
},
"ScrollingSpeed": {
"text2": [
@@ -210,89 +224,89 @@ ],
"desc": "Hastigheten på rulletekst"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "voltage"
+ "Swap",
+ "+ - keys"
],
- "desc": "Max QC voltage the iron should negotiate for"
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "AvDvSk",
+ ""
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Vis detaljert informasjon med liten skrift på dvaleskjermen."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "AvLdSk",
+ ""
],
- "desc": "Sensitivity to magnets (0=Inaktiv | 1=Minst følsom | ... | 9=Mest følsom)"
+ "desc": "Vis detaljert informasjon ved lodding"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "KalSpIn?",
+ ""
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Kalibrer spenning. Knappene justerer. Langt trykk for å gå ut"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "TilbStl?",
+ ""
+ ],
+ "desc": "Tilbakestill alle innstillinger"
+ },
"LanguageSwitch": {
"text2": [
"Språk:",
" NO Norsk"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_PL.json b/Translations/translation_PL.json index 5b7cbcda..72465489 100644 --- a/Translations/translation_PL.json +++ b/Translations/translation_PL.json @@ -105,6 +105,69 @@ ],
"desc": "Źródło zasilania. Ustaw napięcie odcięcia. (DC 10V) (S 3.3V dla ogniw Li, wyłącz limit mocy)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimalne",
+ "napięcie"
+ ],
+ "desc": "Minimalne dozwolone napięcie na komórkę (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "napięcie"
+ ],
+ "desc": "Maksymalne napięcie, które lutownica będzie próbowała wynegocjować z ładowarką Quick Charge (V)"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "Limit czasu",
+ "PD"
+ ],
+ "desc": "Limit czasu negocjacji PD w krokach co 100 ms dla zgodności z niektórymi ładowarkami QC (0: wyłączone)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Temp.",
+ "boost"
+ ],
+ "desc": "Temperatura w trybie \"boost\" "
+ },
+ "AutoStart": {
+ "text2": [
+ "Aut. uruch.",
+ "tr. lutowania"
+ ],
+ "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Zm. temp.",
+ "kr. przyc."
+ ],
+ "desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu (°C)"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Zm. temp.",
+ "dł. przyc."
+ ],
+ "desc": "Wartość zmiany temperatury, po długim przyciśnięciu (°C)"
+ },
+ "LockingMode": {
+ "text2": [
+ "Blokada",
+ "przycisków"
+ ],
+ "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Czułość",
+ "wykr. ruchu"
+ ],
+ "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+ },
"SleepTemperature": {
"text2": [
"Temp.",
@@ -126,12 +189,12 @@ ],
"desc": "Czas do wyłączenia (minuty)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
"Czułość",
- "wykr. ruchu"
+ "cz. Halla"
],
- "desc": "Czułość wykrywania ruchu (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+ "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Jednostka temperatury (C: Celciusz | F: Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Szeczegółowy",
- "ekran bezczy."
- ],
- "desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynności"
- },
"DisplayRotation": {
"text2": [
"Obrót",
@@ -154,20 +210,6 @@ ],
"desc": "Obrót ekranu (P: dla praworęcznych | L: dla leworęcznych | A: automatycznie)"
},
- "BoostTemperature": {
- "text2": [
- "Temp.",
- "boost"
- ],
- "desc": "Temperatura w trybie \"boost\" "
- },
- "AutoStart": {
- "text2": [
- "Aut. uruch.",
- "tr. lutowania"
- ],
- "desc": "Automatyczne uruchamianie trybu lutowania po włączeniu zasilania. (B: wyłączone | T: lutowanie | Z: uśpienie | O: uśpienie w temp. pokojowej)"
- },
"CooldownBlink": {
"text2": [
"Mig. podczas",
@@ -175,34 +217,6 @@ ],
"desc": "Temperatura miga podczas wychładzania, gdy grot jest wciąż gorący"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Ustawienia",
- "fabryczne"
- ],
- "desc": "Resetuje wszystkie ustawienia"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibracja",
- "napięcia"
- ],
- "desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
- },
- "AdvancedSoldering": {
- "text2": [
- "Sz. inf. w",
- "tr. lutowania"
- ],
- "desc": "Wyświetl szczegółowe informacje w trybie lutowania"
- },
"ScrollingSpeed": {
"text2": [
"Sz. przew.",
@@ -210,89 +224,89 @@ ],
"desc": "Szybkość przewijania tekstu"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "napięcie"
+ "Zamień przyc.",
+ "+ -"
],
- "desc": "Maksymalne napięcie, które lutownica będzie próbowała wynegocjować z ładowarką Quick Charge (V)"
+ "desc": "Zamienia działanie przycisków zmiany temperatury grotu"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "Limit czasu",
- "PD"
+ "Prędkosć",
+ "animacji"
],
- "desc": "Limit czasu negocjacji PD w krokach co 100 ms dla zgodności z niektórymi ładowarkami QC (0: wyłączone)"
+ "desc": "Prędkość animacji ikon w menu (O: wył. | W: mała | M: średnia | S: duża)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Ogr.",
- "mocy"
+ "Zapętlona",
+ "animacja"
],
- "desc": "Maksymalna moc (W), jakiej może użyć lutownica"
+ "desc": "Zapętla animację ikon w menu głównym"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Zamień przyc.",
- "+ -"
+ "Jasność",
+ "wyświetlacza"
],
- "desc": "Zamienia działanie przycisków zmiany temperatury grotu"
+ "desc": "Regulacja kontrastu/jasności wyświetlacza OLED"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Zm. temp.",
- "kr. przyc."
+ "Odwrócenie",
+ "kolorów"
],
- "desc": "Wartość zmiany temperatury, po krótkim przyciśnięciu (°C)"
+ "desc": "Odwrócenie kolorów wyświetlacza OLED"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Zm. temp.",
- "dł. przyc."
+ "Długość wyś.",
+ "loga"
],
- "desc": "Wartość zmiany temperatury, po długim przyciśnięciu (°C)"
+ "desc": "Ustawia czas wyświetlania loga podczas uruchamiania (s=sekund)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Moc",
- "impulsu"
+ "Szeczegółowy",
+ "ekran bezczy."
],
- "desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie (W) aby nie uśpić powerbanku"
+ "desc": "Wyświetla szczegółowe informacje za pomocą mniejszej czcionki na ekranie bezczynności"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Czułość",
- "cz. Halla"
+ "Sz. inf. w",
+ "tr. lutowania"
],
- "desc": "Czułość czujnika Halla, używanego do przechodznia w tryb uśpienia (0: Wyłączona | 1: Minimalna | ... | 9: Maksymalna)"
+ "desc": "Wyświetl szczegółowe informacje w trybie lutowania"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Blokada",
- "przycisków"
+ "Ogr.",
+ "mocy"
],
- "desc": "W trybie lutowania, wciśnij oba przyciski aby je zablokować (O=Wyłączona | B=tylko Boost | P=pełna blokada)"
+ "desc": "Maksymalna moc (W), jakiej może użyć lutownica"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimalne",
- "napięcie"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimalne dozwolone napięcie na komórkę (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Zapętlona",
- "animacja"
+ "Kalibracja",
+ "napięcia"
],
- "desc": "Zapętla animację ikon w menu głównym"
+ "desc": "Kalibracja napięcia wejściowego. Krótkie naciśnięcie, aby ustawić, długie naciśnięcie, aby wyjść."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Prędkosć",
- "animacji"
+ "Moc",
+ "impulsu"
],
- "desc": "Prędkość animacji ikon w menu (O: wył. | W: mała | M: średnia | S: duża)"
+ "desc": "W przypadku używania powerbanku, utrzymuj moc na poziomie (W) aby nie uśpić powerbanku"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Długość impulsu mocy zapobiegającego usypianiu powerbanku (x250 ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Ustawienia",
+ "fabryczne"
+ ],
+ "desc": "Resetuje wszystkie ustawienia"
+ },
"LanguageSwitch": {
"text2": [
"Język :",
" PL Polski"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Jasność",
- "wyświetlacza"
- ],
- "desc": "Regulacja kontrastu/jasności wyświetlacza OLED"
- },
- "ColourInversion": {
- "text2": [
- "Odwrócenie",
- "kolorów"
- ],
- "desc": "Odwrócenie kolorów wyświetlacza OLED"
- },
- "LOGOTime": {
- "text2": [
- "Długość wyś.",
- "loga"
- ],
- "desc": "Ustawia czas wyświetlania loga podczas uruchamiania (s=sekund)"
}
}
}
diff --git a/Translations/translation_PT.json b/Translations/translation_PT.json index b9d0aa2b..f206d458 100644 --- a/Translations/translation_PT.json +++ b/Translations/translation_PT.json @@ -105,6 +105,69 @@ ],
"desc": "Fonte de alimentação. Define a tensão de corte. (DC=10V) (S=3.3V/célula)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Potência",
+ "Fonte"
+ ],
+ "desc": "Potência da fonte usada (Watt)"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Modo turbo",
+ "temperat."
+ ],
+ "desc": "Ajuste de temperatura do \"modo turbo\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Partida",
+ "automática"
+ ],
+ "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp change",
+ "short"
+ ],
+ "desc": "Temperature-change-increment on short button press"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Sensibilidade",
+ "movimento"
+ ],
+ "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
+ },
"SleepTemperature": {
"text2": [
"Temperat.",
@@ -126,12 +189,12 @@ ],
"desc": "Tempo para desligamento (Minutos)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Sensibilidade",
- "movimento"
+ "Hall sensor",
+ "sensitivity"
],
- "desc": "Sensibilidade ao movimento (0=Desligado | 1=Menor | ... | 9=Maior)"
+ "desc": "Sensitivity to magnets (0=Desligado | 1=Menor | ... | 9=Maior)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Unidade de temperatura (C=Celsius | F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Tela repouso",
- "avançada"
- ],
- "desc": "Exibe informações avançadas quando em espera"
- },
"DisplayRotation": {
"text2": [
"Orientação",
@@ -154,20 +210,6 @@ ],
"desc": "Orientação da tela (D=estro | C=anhoto | A=utomática)"
},
- "BoostTemperature": {
- "text2": [
- "Modo turbo",
- "temperat."
- ],
- "desc": "Ajuste de temperatura do \"modo turbo\""
- },
- "AutoStart": {
- "text2": [
- "Partida",
- "automática"
- ],
- "desc": "Aquece a ponta automaticamente ao ligar (D=desligar | S=soldagem | H=hibernar | A=hibernar temp. ambiente)"
- },
"CooldownBlink": {
"text2": [
"Piscar ao",
@@ -175,34 +217,6 @@ ],
"desc": "Faz o valor da temperatura piscar durante o arrefecimento"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Reset de",
- "fábrica?"
- ],
- "desc": "Reverte todos ajustes"
- },
- "VoltageCalibration": {
- "text2": [
- "Calibrar",
- "tensão"
- ],
- "desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
- },
- "AdvancedSoldering": {
- "text2": [
- "Tela trabalho",
- "avançada"
- ],
- "desc": "Exibe informações avançadas durante o uso"
- },
"ScrollingSpeed": {
"text2": [
"Velocidade",
@@ -210,89 +224,89 @@ ],
"desc": "Velocidade a que o texto é exibido"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Potência",
- "Fonte"
+ "Swap",
+ "+ - keys"
],
- "desc": "Potência da fonte usada (Watt)"
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
+ "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Tela repouso",
+ "avançada"
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Exibe informações avançadas quando em espera"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Tela trabalho",
+ "avançada"
],
- "desc": "Sensitivity to magnets (0=Desligado | 1=Menor | ... | 9=Maior)"
+ "desc": "Exibe informações avançadas durante o uso"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Calibrar",
+ "tensão"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Calibra a tensão de alimentação. Use os botões para ajustar o valor. Mantenha pressionado para sair"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Reset de",
+ "fábrica?"
+ ],
+ "desc": "Reverte todos ajustes"
+ },
"LanguageSwitch": {
"text2": [
"Idioma :",
" PT Português"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_RO.json b/Translations/translation_RO.json index eedc0d09..f3e6af4a 100644 --- a/Translations/translation_RO.json +++ b/Translations/translation_RO.json @@ -105,6 +105,69 @@ ],
"desc": "Sursa de alimentare. Setează tensiunea de întrerupere. (DC 10V) (S 3.3V per celulă, dezactivati limita de alimentare)"
},
+ "MinVolCell": {
+ "text2": [
+ "Voltaj",
+ "minim"
+ ],
+ "desc": "Tensiunea minimă admisă pe celulă (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "voltaj"
+ ],
+ "desc": "Tensiunea maximă QC dorită pentru care negociază letconul"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "Timp limita de negociere pentru tranzactia PD, in pasi de 100ms, pentru compatibilitate cu alimentatoarele QC"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost",
+ "temp"
+ ],
+ "desc": "Temperatura utilizată în \"modul boost\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Auto",
+ "start"
+ ],
+ "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Schimbare temp.",
+ "apăsare scută"
+ ],
+ "desc": "Schimbarea temperaturii la apăsarea scurtă a butonului"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Schimbare temp.",
+ "apăsare lungă"
+ ],
+ "desc": "Schimbarea temperaturii la apăsarea lungă a butonului"
+ },
+ "LockingMode": {
+ "text2": [
+ "Blocare",
+ "butoane"
+ ],
+ "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Sensibilitate",
+ "la mişcare"
+ ],
+ "desc": "0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil"
+ },
"SleepTemperature": {
"text2": [
"Temp",
@@ -126,12 +189,12 @@ ],
"desc": "Interval înainte ca letconul să se oprească (m=minute)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
"Sensibilitate",
- "la mişcare"
+ "senzor Hall"
],
- "desc": "0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil"
+ "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "C=Celsius | F=Fahrenheit"
},
- "AdvancedIdle": {
- "text2": [
- "Detalii,",
- "ecran inactiv"
- ],
- "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de repaus"
- },
"DisplayRotation": {
"text2": [
"Orientare",
@@ -154,20 +210,6 @@ ],
"desc": "R=dreptaci | L=stângaci | A=auto"
},
- "BoostTemperature": {
- "text2": [
- "Boost",
- "temp"
- ],
- "desc": "Temperatura utilizată în \"modul boost\""
- },
- "AutoStart": {
- "text2": [
- "Auto",
- "start"
- ],
- "desc": "Start letcon în modul de lipire la pornire (O=oprit | S=lipire | Z=repaus | R=repaus la temperatura camerei)"
- },
"CooldownBlink": {
"text2": [
"Clipeste",
@@ -175,34 +217,6 @@ ],
"desc": "Clipeste temperatura după oprirea încălzirii, în timp ce vârful este încă fierbinte"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Setări",
- "din fabrică"
- ],
- "desc": "Reveniti la setările din fabrică"
- },
- "VoltageCalibration": {
- "text2": [
- "Calibrare tens.",
- "de intrare?"
- ],
- "desc": "Porniti calibrarea VIN (apăsati lung pentru a iesi)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Detalii",
- "ecran lipire"
- ],
- "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de lipire"
- },
"ScrollingSpeed": {
"text2": [
"Viteză",
@@ -210,89 +224,89 @@ ],
"desc": "Viteză derulare text cu informatii la (S=lent | F=rapid)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "voltaj"
+ "Inversare",
+ "+ - butoane"
],
- "desc": "Tensiunea maximă QC dorită pentru care negociază letconul"
+ "desc": "Inversarea butoanelor de reglare a temperaturii"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Animatii",
+ "viteză"
],
- "desc": "Timp limita de negociere pentru tranzactia PD, in pasi de 100ms, pentru compatibilitate cu alimentatoarele QC"
+ "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | Î=încet | M=mediu | R=rapid)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Putere",
- "limită"
+ "Animatii",
+ "buclă"
],
- "desc": "Puterea maximă pe care letconul o poate folosi (W=watt)"
+ "desc": "Animatii de pictograme în meniul principal"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Inversare",
- "+ - butoane"
+ "Ecranului",
+ "luminozitatea"
],
- "desc": "Inversarea butoanelor de reglare a temperaturii"
+ "desc": "Ajusteaza luminozitatea ecranului"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Schimbare temp.",
- "apăsare scută"
+ "Inverseaza",
+ "culoarea"
],
- "desc": "Schimbarea temperaturii la apăsarea scurtă a butonului"
+ "desc": "Inverseaza culoarea ecranului"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Schimbare temp.",
- "apăsare lungă"
+ "Boot logo",
+ "duration"
],
- "desc": "Schimbarea temperaturii la apăsarea lungă a butonului"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Putere",
- "puls"
+ "Detalii,",
+ "ecran inactiv"
],
- "desc": "Puterea pulsului de mentinere activa a blocului de alimentare (watt)"
+ "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de repaus"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Sensibilitate",
- "senzor Hall"
+ "Detalii",
+ "ecran lipire"
],
- "desc": "Sensibilitate senzor cu efect Hall pentru a detecta repausul (0=oprit | 1=putin sensibil | ... | 9=cel mai sensibil)"
+ "desc": "Afisati informatii detaliate într-un font mai mic pe ecranul de lipire"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Blocare",
- "butoane"
+ "Putere",
+ "limită"
],
- "desc": "Când lipiti, apăsati lung ambele butoane, pentru a le bloca (D=dezactivare | B=numai \"modul boost\" | F=blocare completă)"
+ "desc": "Puterea maximă pe care letconul o poate folosi (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Voltaj",
- "minim"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Tensiunea minimă admisă pe celulă (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Animatii",
- "buclă"
+ "Calibrare tens.",
+ "de intrare?"
],
- "desc": "Animatii de pictograme în meniul principal"
+ "desc": "Porniti calibrarea VIN (apăsati lung pentru a iesi)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Animatii",
- "viteză"
+ "Putere",
+ "puls"
],
- "desc": "Ritmul animatiilor pictogramei din meniu (O=oprit | Î=încet | M=mediu | R=rapid)"
+ "desc": "Puterea pulsului de mentinere activa a blocului de alimentare (watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Durata pulsului de mentinere (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Setări",
+ "din fabrică"
+ ],
+ "desc": "Reveniti la setările din fabrică"
+ },
"LanguageSwitch": {
"text2": [
"Limbă:",
" RO Română"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Ecranului",
- "luminozitatea"
- ],
- "desc": "Ajusteaza luminozitatea ecranului"
- },
- "ColourInversion": {
- "text2": [
- "Inverseaza",
- "culoarea"
- ],
- "desc": "Inverseaza culoarea ecranului"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_RU.json b/Translations/translation_RU.json index 874f0432..b77f8744 100644 --- a/Translations/translation_RU.json +++ b/Translations/translation_RU.json @@ -106,6 +106,69 @@ ],
"desc": "Источник питания. Устанавливает напряжение отсечки. (DC 10В) (S 3,3В на ячейку, без лимита мощности)"
},
+ "MinVolCell": {
+ "text2": [
+ "Мин.",
+ "напр."
+ ],
+ "desc": "Минимальное разрешенное напряжение на ячейку (3S: 3 - 3,7V | 4S-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Ограничение",
+ "напряжения QC"
+ ],
+ "desc": "Максимальное напряжение для согласования с QC источником питания"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "тайм-аут"
+ ],
+ "desc": "Power Delivery тайм-аут согласования с шагом 100 мс для совместимости с некоторыми быстрыми зарядными QC (0: отключено)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "t° турбо",
+ "режима"
+ ],
+ "desc": "Температура жала в турбо-режиме"
+ },
+ "AutoStart": {
+ "text2": [
+ "Авто",
+ "старт"
+ ],
+ "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Шаг темп.",
+ "кор. наж."
+ ],
+ "desc": "Шаг изменения температуры при коротком нажатии кнопок"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Шаг темп.",
+ "длин. наж."
+ ],
+ "desc": "Шаг изменения температуры при длинном нажатии кнопок"
+ },
+ "LockingMode": {
+ "text2": [
+ "Разрешить",
+ "блок. кнопок"
+ ],
+ "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Чувствительн.",
+ "акселерометра"
+ ],
+ "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
+ },
"SleepTemperature": {
"text2": [
"Темп.",
@@ -127,12 +190,12 @@ ],
"desc": "Время до отключения паяльника (Минуты)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Чувствительн.",
- "акселерометра"
+ "Датчик",
+ "Холла"
],
- "desc": "Чувствительность акселерометра (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
+ "desc": "Чувствительность датчика Холла к переходу в спящий режим (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
},
"TemperatureUnit": {
"text2": [
@@ -141,13 +204,6 @@ ],
"desc": "Единицы измерения температуры (C=Цельcия | F=Фаренгейта)"
},
- "AdvancedIdle": {
- "text2": [
- "Подробный",
- "реж. ожидания"
- ],
- "desc": "Отображать детальную информацию уменьшенным шрифтом на экране ожидания"
- },
"DisplayRotation": {
"text2": [
"Ориентация",
@@ -155,20 +211,6 @@ ],
"desc": "Ориентация экрана (П=Правая рука | Л=Левая рука | А=Авто)"
},
- "BoostTemperature": {
- "text2": [
- "t° турбо",
- "режима"
- ],
- "desc": "Температура жала в турбо-режиме"
- },
- "AutoStart": {
- "text2": [
- "Авто",
- "старт"
- ],
- "desc": "Режим, в котором запускается паяльник при подаче питания (В=Выкл. | П=Пайка | О=Ожидание | К=Ожидание при комн. темп.)"
- },
"CooldownBlink": {
"text2": [
"Мигание t°",
@@ -176,34 +218,6 @@ ],
"desc": "Мигать температурой на экране охлаждения, пока жало еще горячее"
},
- "CalibrateCJC": {
- "text2": [
- "Калибровка",
- "температуры"
- ],
- "desc": "Калибровка компенсации холодного спая жала при следующей загрузке (не требуется, если Delta T < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Сброс",
- "Настроек"
- ],
- "desc": "Сброс настроек к значеням по умолчанию"
- },
- "VoltageCalibration": {
- "text2": [
- "Калибровка",
- "напряжения"
- ],
- "desc": "Калибровка входного напряжения (долгое нажатие для выхода)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Подробный",
- "экран пайки"
- ],
- "desc": "Показывать детальную информацию на экране пайки"
- },
"ScrollingSpeed": {
"text2": [
"Скорость",
@@ -211,89 +225,89 @@ ],
"desc": "Скорость прокрутки текста (М=медленно | Б=быстро)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Ограничение",
- "напряжения QC"
+ "Инвертировать",
+ "кнопки"
],
- "desc": "Максимальное напряжение для согласования с QC источником питания"
+ "desc": "Инвертировать кнопки изменения температуры"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "тайм-аут"
+ "Скорость",
+ "анимации"
],
- "desc": "Power Delivery тайм-аут согласования с шагом 100 мс для совместимости с некоторыми быстрыми зарядными QC (0: отключено)"
+ "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Предел",
- "мощности"
+ "Зацикленная",
+ "анимация"
],
- "desc": "Максимальная мощность, которую может использовать паяльник (Ватт)"
+ "desc": "Зацикленная анимация иконок в главном меню"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Инвертировать",
- "кнопки"
+ "Яркость",
+ "экрана"
],
- "desc": "Инвертировать кнопки изменения температуры"
+ "desc": "Настройки контраста/яркости OLED экрана"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Шаг темп.",
- "кор. наж."
+ "Инверсия",
+ "экрана"
],
- "desc": "Шаг изменения температуры при коротком нажатии кнопок"
+ "desc": "Инвертировать цвета на OLED экране"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Шаг темп.",
- "длин. наж."
+ "Длительность",
+ "показа логотипа"
],
- "desc": "Шаг изменения температуры при длинном нажатии кнопок"
+ "desc": "Длительность отображения логотипа (в секундах)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Сила имп.",
- "питания Вт"
+ "Подробный",
+ "реж. ожидания"
],
- "desc": "Сила импульса удерживающего от сна повербанк или другой источник питания"
+ "desc": "Отображать детальную информацию уменьшенным шрифтом на экране ожидания"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Датчик",
- "Холла"
+ "Подробный",
+ "экран пайки"
],
- "desc": "Чувствительность датчика Холла к переходу в спящий режим (0=Выкл. | 1=Мин. | ... | 9=Макс.)"
+ "desc": "Показывать детальную информацию на экране пайки"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Разрешить",
- "блок. кнопок"
+ "Предел",
+ "мощности"
],
- "desc": "При работе длинное нажатие обеих кнопок блокирует их (О=Отключено | Т=Только турбо | П=Полная блокировка)"
+ "desc": "Максимальная мощность, которую может использовать паяльник (Ватт)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Мин.",
- "напр."
+ "Калибровка",
+ "температуры"
],
- "desc": "Минимальное разрешенное напряжение на ячейку (3S: 3 - 3,7V | 4S-6S: 2,4 - 3,7V)"
+ "desc": "Калибровка компенсации холодного спая жала при следующей загрузке (не требуется, если Delta T < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Зацикленная",
- "анимация"
+ "Калибровка",
+ "напряжения"
],
- "desc": "Зацикленная анимация иконок в главном меню"
+ "desc": "Калибровка входного напряжения (долгое нажатие для выхода)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Скорость",
- "анимации"
+ "Сила имп.",
+ "питания Вт"
],
- "desc": "Скорость анимации иконок в главном меню (Милисекунды) (О=Отключено | Н=Низкий | С=Средний | В=Высокий)"
+ "desc": "Сила импульса удерживающего от сна повербанк или другой источник питания"
},
"PowerPulseWait": {
"text2": [
@@ -309,33 +323,19 @@ ],
"desc": "Длина импульса удерживающего от сна источник питания (x 250мс)"
},
+ "SettingsReset": {
+ "text2": [
+ "Сброс",
+ "Настроек"
+ ],
+ "desc": "Сброс настроек к значеням по умолчанию"
+ },
"LanguageSwitch": {
"text2": [
"Язык:",
" RU Русский"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Яркость",
- "экрана"
- ],
- "desc": "Настройки контраста/яркости OLED экрана"
- },
- "ColourInversion": {
- "text2": [
- "Инверсия",
- "экрана"
- ],
- "desc": "Инвертировать цвета на OLED экране"
- },
- "LOGOTime": {
- "text2": [
- "Длительность",
- "показа логотипа"
- ],
- "desc": "Длительность отображения логотипа (в секундах)"
}
}
}
diff --git a/Translations/translation_SK.json b/Translations/translation_SK.json index 24233755..894be258 100644 --- a/Translations/translation_SK.json +++ b/Translations/translation_SK.json @@ -105,6 +105,69 @@ ],
"desc": "Zdroj napätia. Nastavenie napätia pre vypnutie (cutoff) (DC=10V | nS=n*3.3V pre LiIon články)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimálne",
+ "napätie"
+ ],
+ "desc": "Minimálne napätie povolené na jeden článok (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Obmedzenie QC",
+ "napätia"
+ ],
+ "desc": "Maximálne QC napätie ktoré si má systém vyžiadať"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "Čas vypršania",
+ "Power Delivery"
+ ],
+ "desc": "Čas vyjednávania Power Delivery v 100ms krokoch pre kompatibilitu s niektorými QC nabíjačkami (0: vypnuté)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Boost",
+ "teplota"
+ ],
+ "desc": "Cieľová teplota pre prudký náhrev (v nastavených jednotkách)"
+ },
+ "AutoStart": {
+ "text2": [
+ "Automatické",
+ "spustenie"
+ ],
+ "desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Malý krok",
+ "teploty"
+ ],
+ "desc": "Zmena teploty pri krátkom stlačení tlačidla"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Veľký krok",
+ "teploty"
+ ],
+ "desc": "Zmena teploty pri držaní tlačidla"
+ },
+ "LockingMode": {
+ "text2": [
+ "Povoliť zámok",
+ "tlačidiel"
+ ],
+ "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Citlivosť",
+ "pohybu"
+ ],
+ "desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
+ },
"SleepTemperature": {
"text2": [
"Pokojová",
@@ -126,12 +189,12 @@ ],
"desc": "Čas na vypnutie (minúty)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Citlivosť",
- "pohybu"
+ "Citliv.",
+ "Hall"
],
- "desc": "Citlivosť detekcie pohybu (0=Vyp | 1=Min | ... | 9=Max)"
+ "desc": "Citlivosť Hallovho senzora pre detekciu spánku (0=Vyp | 1=Min | ... | 9=Max)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Jednotky merania teploty (C=stupne Celzia | F=stupne Fahrenheita)"
},
- "AdvancedIdle": {
- "text2": [
- "Detaily v",
- "pokoj. režime"
- ],
- "desc": "Zobraziť detailné informácie v pokojovom režime (T=Zap | F=Vyp)"
- },
"DisplayRotation": {
"text2": [
"Orientácia",
@@ -154,20 +210,6 @@ ],
"desc": "Orientácia displeja (P=Pravák | L=Ľavák | A=Auto)"
},
- "BoostTemperature": {
- "text2": [
- "Boost",
- "teplota"
- ],
- "desc": "Cieľová teplota pre prudký náhrev (v nastavených jednotkách)"
- },
- "AutoStart": {
- "text2": [
- "Automatické",
- "spustenie"
- ],
- "desc": "Pri štarte spustiť režim spájkovania (V=Vyp | Z=Spájkovanie | S=Spanok | I=Spanok izbová teplota)"
- },
"CooldownBlink": {
"text2": [
"Blikanie pri",
@@ -175,34 +217,6 @@ ],
"desc": "Blikanie ukazovateľa teploty počas chladnutia hrotu"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Obnovenie",
- "nastavení"
- ],
- "desc": "Obnovenie nastavení na pôvodné hodnoty"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibrácia",
- "nap. napätia"
- ],
- "desc": "Kalibrácia napájacieho napätia. Krátke stlačenie mení nastavenie, dlhé stlačenie pre návrat"
- },
- "AdvancedSoldering": {
- "text2": [
- "Detaily počas",
- "spájkovania"
- ],
- "desc": "Zobrazenie detailov počas spájkovania"
- },
"ScrollingSpeed": {
"text2": [
"Rýchlosť",
@@ -210,89 +224,89 @@ ],
"desc": "Rýchlosť pohybu tohto textu"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Obmedzenie QC",
- "napätia"
+ "Otočenie",
+ "tlačidiel +/-"
],
- "desc": "Maximálne QC napätie ktoré si má systém vyžiadať"
+ "desc": "Prehodenie tlačidiel na nastavovanie teploty"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "Čas vypršania",
- "Power Delivery"
+ "Rýchlosť",
+ "animácií"
],
- "desc": "Čas vyjednávania Power Delivery v 100ms krokoch pre kompatibilitu s niektorými QC nabíjačkami (0: vypnuté)"
+ "desc": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Obmedzenie",
- "výkonu"
+ "Opakovanie",
+ "animácií"
],
- "desc": "Obmedzenie výkonu podľa použitého zdroja (watt)"
+ "desc": "Opakovanie animácií ikoniek v hlavnom menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Otočenie",
- "tlačidiel +/-"
+ "Jas",
+ "obrazovky"
],
- "desc": "Prehodenie tlačidiel na nastavovanie teploty"
+ "desc": "Mení jas/kontrast OLED displeja"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Malý krok",
- "teploty"
+ "Invertovať",
+ "obrazovku"
],
- "desc": "Zmena teploty pri krátkom stlačení tlačidla"
+ "desc": "Invertovať farby OLED displeja"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Veľký krok",
- "teploty"
+ "Trvanie",
+ "boot loga"
],
- "desc": "Zmena teploty pri držaní tlačidla"
+ "desc": "Doba trvania boot loga (s=sekundy)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Intenzita",
- "impulzu"
+ "Detaily v",
+ "pokoj. režime"
],
- "desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) (watt)"
+ "desc": "Zobraziť detailné informácie v pokojovom režime (T=Zap | F=Vyp)"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Citliv.",
- "Hall"
+ "Detaily počas",
+ "spájkovania"
],
- "desc": "Citlivosť Hallovho senzora pre detekciu spánku (0=Vyp | 1=Min | ... | 9=Max)"
+ "desc": "Zobrazenie detailov počas spájkovania"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Povoliť zámok",
- "tlačidiel"
+ "Obmedzenie",
+ "výkonu"
],
- "desc": "Zamknutie tlačidiel - dlhé stlačenie oboch naraz počas spájkovania (Z=Zakázať | B=Okrem boost | P=Plné zamknutie)"
+ "desc": "Obmedzenie výkonu podľa použitého zdroja (watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimálne",
- "napätie"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimálne napätie povolené na jeden článok (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Opakovanie",
- "animácií"
+ "Kalibrácia",
+ "nap. napätia"
],
- "desc": "Opakovanie animácií ikoniek v hlavnom menu"
+ "desc": "Kalibrácia napájacieho napätia. Krátke stlačenie mení nastavenie, dlhé stlačenie pre návrat"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Rýchlosť",
- "animácií"
+ "Intenzita",
+ "impulzu"
],
- "desc": "Rýchlosť animácií ikoniek v menu (O=off | P=pomaly | S=stredne | R=rýchlo)"
+ "desc": "Impulz udržujúci napájací zdroj zapnutý (power banky) (watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Dĺžka impulzu udržujúci napájací zdroj zapnutý (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Obnovenie",
+ "nastavení"
+ ],
+ "desc": "Obnovenie nastavení na pôvodné hodnoty"
+ },
"LanguageSwitch": {
"text2": [
"Jazyk:",
" SK Slovenčina"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Jas",
- "obrazovky"
- ],
- "desc": "Mení jas/kontrast OLED displeja"
- },
- "ColourInversion": {
- "text2": [
- "Invertovať",
- "obrazovku"
- ],
- "desc": "Invertovať farby OLED displeja"
- },
- "LOGOTime": {
- "text2": [
- "Trvanie",
- "boot loga"
- ],
- "desc": "Doba trvania boot loga (s=sekundy)"
}
}
}
diff --git a/Translations/translation_SL.json b/Translations/translation_SL.json index 26dfcdeb..5c32470d 100644 --- a/Translations/translation_SL.json +++ b/Translations/translation_SL.json @@ -105,6 +105,69 @@ ],
"desc": "Vir napajanja. Nastavi napetost izklopa. (DC 10V) (S 3.3V na celico)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "napetost"
+ ],
+ "desc": "Moč napajalnega vira v vatih [W]"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Pospešena",
+ "temp."
+ ],
+ "desc": "Temperatura v pospešenem načinu"
+ },
+ "AutoStart": {
+ "text2": [
+ "Samodejni",
+ "zagon"
+ ],
+ "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Kratka sprememba",
+ "temperature?"
+ ],
+ "desc": "Temperatura se spremeni ob kratkem pritisku na gumb."
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Dolga sprememba",
+ "temperature?"
+ ],
+ "desc": "Temperatura se spremeni ob dolgem pritisku na gumb."
+ },
+ "LockingMode": {
+ "text2": [
+ "Omogoči",
+ "zaklep gumbov"
+ ],
+ "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Občutljivost",
+ "premikanja"
+ ],
+ "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
+ },
"SleepTemperature": {
"text2": [
"Temp. med",
@@ -126,12 +189,12 @@ ],
"desc": "Čas do izklopa (m=minute)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Občutljivost",
- "premikanja"
+ "Občut.",
+ "Hall son"
],
- "desc": "0=izklopljeno | 1=najmanjša | ... | 9=največja"
+ "desc": "Občutljivost Hallove sonde za zaznavanje spanja (0=izklopljeno | 1=najmanjša | ... | 9=največja)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Enota za temperaturo (C=celzij | F=fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Več info. na",
- "mir. zaslonu"
- ],
- "desc": "Prikaži več informacij z manjšo pisavo na mirovalnem zaslonu."
- },
"DisplayRotation": {
"text2": [
"Orientacija",
@@ -154,20 +210,6 @@ ],
"desc": "D=desničar | L=levičar | S=samodejno"
},
- "BoostTemperature": {
- "text2": [
- "Pospešena",
- "temp."
- ],
- "desc": "Temperatura v pospešenem načinu"
- },
- "AutoStart": {
- "text2": [
- "Samodejni",
- "zagon"
- ],
- "desc": "Samodejno gretje konice ob vklopu (U=ugasnjeno | S=spajkanje | Z=spanje | V=spanje na sobni temperaturi)"
- },
"CooldownBlink": {
"text2": [
"Utripanje med",
@@ -175,34 +217,6 @@ ],
"desc": "Ko je konica še vroča, utripaj prikaz temperature med hlajenjem."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Tovarniške",
- "nastavitve?"
- ],
- "desc": "Ponastavitev vseh nastavitev"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibriram",
- "vhodno napetost?"
- ],
- "desc": "Kalibracija VIN (nastavitve z gumbi, dolg pritisk za izhod)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Več info na",
- "zaslonu spaj."
- ],
- "desc": "Prikaže več informacij z manjšo pisavo na zaslonu med spajkanjem."
- },
"ScrollingSpeed": {
"text2": [
"Hitrost",
@@ -210,89 +224,89 @@ ],
"desc": "Hitrost, s katero se prikazuje besedilo (P=počasi | H=hitro)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "napetost"
+ "Obrni",
+ "tipki + -?"
],
- "desc": "Moč napajalnega vira v vatih [W]"
+ "desc": "Zamenjaj funkciji gumbov."
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | H=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Meja",
- "moči"
+ "Anim.",
+ "loop"
],
- "desc": "Največja dovoljena moč v vatih [W]"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Obrni",
- "tipki + -?"
+ "Screen",
+ "brightness"
],
- "desc": "Zamenjaj funkciji gumbov."
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Kratka sprememba",
- "temperature?"
+ "Invert",
+ "screen"
],
- "desc": "Temperatura se spremeni ob kratkem pritisku na gumb."
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Dolga sprememba",
- "temperature?"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperatura se spremeni ob dolgem pritisku na gumb."
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Pulz",
- "moči"
+ "Več info. na",
+ "mir. zaslonu"
],
- "desc": "Velikost moči za vzdrževanje budnosti."
+ "desc": "Prikaži več informacij z manjšo pisavo na mirovalnem zaslonu."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Občut.",
- "Hall son"
+ "Več info na",
+ "zaslonu spaj."
],
- "desc": "Občutljivost Hallove sonde za zaznavanje spanja (0=izklopljeno | 1=najmanjša | ... | 9=največja)"
+ "desc": "Prikaže več informacij z manjšo pisavo na zaslonu med spajkanjem."
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Omogoči",
- "zaklep gumbov"
+ "Meja",
+ "moči"
],
- "desc": "Za zaklep med spajkanjem drži oba gumba (O=onemogoči | L=le pospešeno | P=polno)"
+ "desc": "Največja dovoljena moč v vatih [W]"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Kalibriram",
+ "vhodno napetost?"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Kalibracija VIN (nastavitve z gumbi, dolg pritisk za izhod)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Pulz",
+ "moči"
],
- "desc": "Pace of icon animations in menu (O=off | P=slow | M=medium | H=fast)"
+ "desc": "Velikost moči za vzdrževanje budnosti."
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Tovarniške",
+ "nastavitve?"
+ ],
+ "desc": "Ponastavitev vseh nastavitev"
+ },
"LanguageSwitch": {
"text2": [
"Jezik:",
" SL Slovenščina"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_SR_CYRL.json b/Translations/translation_SR_CYRL.json index 2e4ea629..0d439d9b 100644 --- a/Translations/translation_SR_CYRL.json +++ b/Translations/translation_SR_CYRL.json @@ -105,6 +105,69 @@ ],
"desc": "Тип напајања; одређује најнижи радни напон. (DC=адаптер [10V] | S=батерија [3,3V по ћелији])"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Улазна",
+ "снага"
+ ],
+ "desc": "Снага напајања у ватима."
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Темп.",
+ "појачања"
+ ],
+ "desc": "Температура врха лемилице у току појачања."
+ },
+ "AutoStart": {
+ "text2": [
+ "Врући",
+ "старт"
+ ],
+ "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp change",
+ "short"
+ ],
+ "desc": "Temperature-change-increment on short button press"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Осетљивост",
+ "на покрет"
+ ],
+ "desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+ },
"SleepTemperature": {
"text2": [
"Темп.",
@@ -126,12 +189,12 @@ ],
"desc": "Време мировања након кога се лемилица гаси. (m=минути)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Осетљивост",
- "на покрет"
+ "Hall sensor",
+ "sensitivity"
],
- "desc": "Осетљивост сензора покрета. (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+ "desc": "Sensitivity to magnets (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Јединице у којима се приказује температура. (C=целзијус | F=фаренхајт)"
},
- "AdvancedIdle": {
- "text2": [
- "Детаљи током",
- "мировања"
- ],
- "desc": "Приказивање детаљних информација на екрану током мировања."
- },
"DisplayRotation": {
"text2": [
"Оријентација",
@@ -154,20 +210,6 @@ ],
"desc": "Како је окренут екран. (Д=за десноруке | Л=за леворуке | А=аутоматски)"
},
- "BoostTemperature": {
- "text2": [
- "Темп.",
- "појачања"
- ],
- "desc": "Температура врха лемилице у току појачања."
- },
- "AutoStart": {
- "text2": [
- "Врући",
- "старт"
- ],
- "desc": "Лемилица одмах по покретању прелази у режим лемљења и греје се. (И=искључити | Л=лемљење | С=спавати | X=спавати собна температура)"
- },
"CooldownBlink": {
"text2": [
"Упозорење",
@@ -175,34 +217,6 @@ ],
"desc": "Приказ температуре трепће приликом хлађења докле год је врх и даље врућ."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
- },
- "SettingsReset": {
- "text2": [
- "Фабричке",
- "поставке"
- ],
- "desc": "Враћање свих поставки на фабричке вредности."
- },
- "VoltageCalibration": {
- "text2": [
- "Калибрација",
- "улазног напона"
- ],
- "desc": "Калибрисање улазног напона. Подешава се на тастере; дуги притисак за крај."
- },
- "AdvancedSoldering": {
- "text2": [
- "Детаљи током",
- "лемљења"
- ],
- "desc": "Приказивање детаљних информација на екрану током лемљења."
- },
"ScrollingSpeed": {
"text2": [
"Брзина",
@@ -210,89 +224,89 @@ ],
"desc": "Брзина кретања описних порука попут ове. (С=споро | Б=брзо)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Улазна",
- "снага"
+ "Swap",
+ "+ - keys"
],
- "desc": "Снага напајања у ватима."
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | С=slow | M=medium | Б=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Детаљи током",
+ "мировања"
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Приказивање детаљних информација на екрану током мировања."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Детаљи током",
+ "лемљења"
],
- "desc": "Sensitivity to magnets (0=искључено | 1=најмање осетљиво | ... | 9=најосетљивије)"
+ "desc": "Приказивање детаљних информација на екрану током лемљења."
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Калибрација",
+ "улазног напона"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Калибрисање улазног напона. Подешава се на тастере; дуги притисак за крај."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | С=slow | M=medium | Б=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250мс)"
},
+ "SettingsReset": {
+ "text2": [
+ "Фабричке",
+ "поставке"
+ ],
+ "desc": "Враћање свих поставки на фабричке вредности."
+ },
"LanguageSwitch": {
"text2": [
"Jезик:",
" SR Српски"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_SR_LATN.json b/Translations/translation_SR_LATN.json index a944c8ed..ff13cb86 100644 --- a/Translations/translation_SR_LATN.json +++ b/Translations/translation_SR_LATN.json @@ -105,6 +105,69 @@ ],
"desc": "Tip napajanja; određuje najniži radni napon. (DC=adapter [10V], S=baterija [3,3V po ćeliji])"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimum",
+ "voltage"
+ ],
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Ulazna",
+ "snaga"
+ ],
+ "desc": "Snaga napajanja u vatima."
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Temp.",
+ "pojačanja"
+ ],
+ "desc": "Temperatura vrha lemilice u toku pojačanja."
+ },
+ "AutoStart": {
+ "text2": [
+ "Vrući",
+ "start"
+ ],
+ "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp change",
+ "short"
+ ],
+ "desc": "Temperature-change-increment on short button press"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp change",
+ "long"
+ ],
+ "desc": "Temperature-change-increment on long button press"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
+ "buttons"
+ ],
+ "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Osetljivost",
+ "na pokret"
+ ],
+ "desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+ },
"SleepTemperature": {
"text2": [
"Temp.",
@@ -126,12 +189,12 @@ ],
"desc": "Vreme mirovanja nakon koga se lemilica gasi. (m=minuti)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Osetljivost",
- "na pokret"
+ "Hall sensor",
+ "sensitivity"
],
- "desc": "Osetljivost senzora pokreta. (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+ "desc": "Sensitivity to magnets (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Jedinice u kojima se prikazuje temperatura. (C=celzijus | F=farenhajt)"
},
- "AdvancedIdle": {
- "text2": [
- "Detalji tokom",
- "mirovanja"
- ],
- "desc": "Prikazivanje detaljnih informacija na ekranu tokom mirovanja."
- },
"DisplayRotation": {
"text2": [
"Orijentacija",
@@ -154,20 +210,6 @@ ],
"desc": "Kako je okrenut ekran. (D=za desnoruke | L=za levoruke | A=automatski)"
},
- "BoostTemperature": {
- "text2": [
- "Temp.",
- "pojačanja"
- ],
- "desc": "Temperatura vrha lemilice u toku pojačanja."
- },
- "AutoStart": {
- "text2": [
- "Vrući",
- "start"
- ],
- "desc": "Lemilica odmah po pokretanju prelazi u režim lemljenja i greje se. (I=isključiti | L=lemljenje | S=spavati | X=spavati sobna temperatura)"
- },
"CooldownBlink": {
"text2": [
"Upozorenje",
@@ -175,34 +217,6 @@ ],
"desc": "Prikaz temperature trepće prilikom hlađenja dokle god je vrh i dalje vruć."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Fabričke",
- "postavke"
- ],
- "desc": "Vraćanje svih postavki na fabričke vrednosti."
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibracija",
- "ulaznog napona"
- ],
- "desc": "Kalibrisanje ulaznog napona. Podešava se na tastere; dugi pritisak za kraj."
- },
- "AdvancedSoldering": {
- "text2": [
- "Detalji tokom",
- "lemljenja"
- ],
- "desc": "Prikazivanje detaljnih informacija na ekranu tokom lemljenja."
- },
"ScrollingSpeed": {
"text2": [
"Brzina",
@@ -210,89 +224,89 @@ ],
"desc": "Brzina kretanja opisnih poruka poput ove. (S=sporo | B=brzo)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Ulazna",
- "snaga"
+ "Swap",
+ "+ - keys"
],
- "desc": "Snaga napajanja u vatima."
+ "desc": "Reverse assignment of buttons for temperature adjustment"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "speed"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ "loop"
],
- "desc": "Maximum power the iron can use (W=watt)"
+ "desc": "Loop icon animations in main menu"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "Reverse assignment of buttons for temperature adjustment"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Temperature-change-increment on short button press"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperature-change-increment on long button press"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Detalji tokom",
+ "mirovanja"
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Prikazivanje detaljnih informacija na ekranu tokom mirovanja."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "Detalji tokom",
+ "lemljenja"
],
- "desc": "Sensitivity to magnets (0=isključeno | 1=najmanje osetljivo | ... | 9=najosetljivije)"
+ "desc": "Prikazivanje detaljnih informacija na ekranu tokom lemljenja."
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ "limit"
],
- "desc": "While soldering, hold down both buttons to toggle locking them (D=disable | B=boost mode only | F=full locking)"
+ "desc": "Maximum power the iron can use (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Kalibracija",
+ "ulaznog napona"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Kalibrisanje ulaznog napona. Podešava se na tastere; dugi pritisak za kraj."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
- "speed"
+ "Power",
+ "pulse"
],
- "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | B=fast)"
+ "desc": "Intensity of power of keep-awake-pulse (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Fabričke",
+ "postavke"
+ ],
+ "desc": "Vraćanje svih postavki na fabričke vrednosti."
+ },
"LanguageSwitch": {
"text2": [
"Jezik:",
" SR Srpski"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_SV.json b/Translations/translation_SV.json index 9f951eb1..20ca5bb0 100644 --- a/Translations/translation_SV.json +++ b/Translations/translation_SV.json @@ -105,6 +105,69 @@ ],
"desc": "Strömkälla. Anger lägsta spänning. (DC 10V) (S 3.3V per cell)"
},
+ "MinVolCell": {
+ "text2": [
+ "Minimim-",
+ "spänning"
+ ],
+ "desc": "Minimumspänning per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "spänning"
+ ],
+ "desc": "Maximal QC-spänning enheten skall efterfråga"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "timeout"
+ ],
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Turbo-",
+ "temp"
+ ],
+ "desc": "Temperatur i \"turbo-läge\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Auto",
+ "start"
+ ],
+ "desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Temp.just",
+ "korttryck"
+ ],
+ "desc": "Temperaturjustering vid kort knapptryckning"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Temp.just",
+ "långtryck"
+ ],
+ "desc": "Temperaturjustering vid lång knapptryckning"
+ },
+ "LockingMode": {
+ "text2": [
+ "Tillåt lås",
+ "via knappar"
+ ],
+ "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Rörelse-",
+ "känslighet"
+ ],
+ "desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+ },
"SleepTemperature": {
"text2": [
"Vilo-",
@@ -126,12 +189,12 @@ ],
"desc": "Avstängnings-timeout (Minuter)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Rörelse-",
- "känslighet"
+ "Sensor-",
+ "känslght"
],
- "desc": "Rörelsekänslighet (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+ "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (0=Av | 1=minst känslig | ... | 9=mest känslig)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "Temperaturenhet (C=Celsius | F=Fahrenheit)"
},
- "AdvancedIdle": {
- "text2": [
- "Detaljerad",
- "vid inaktiv"
- ],
- "desc": "Visa detaljerad information i mindre typsnitt när inaktiv."
- },
"DisplayRotation": {
"text2": [
"Visnings",
@@ -154,20 +210,6 @@ ],
"desc": "Visningsläge (H=Högerhänt | V=Vänsterhänt | A=Automatisk)"
},
- "BoostTemperature": {
- "text2": [
- "Turbo-",
- "temp"
- ],
- "desc": "Temperatur i \"turbo-läge\""
- },
- "AutoStart": {
- "text2": [
- "Auto",
- "start"
- ],
- "desc": "Startar automatiskt lödpennan vid uppstart. (A=Av | L=Lödning | V=Viloläge | R=Viloläge Rumstemperatur)"
- },
"CooldownBlink": {
"text2": [
"Nedkylnings-",
@@ -175,34 +217,6 @@ ],
"desc": "Blinka temperaturen medan spetsen kyls av och fortfarande är varm."
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Fabriks-",
- "inställ?"
- ],
- "desc": "Återställ alla inställningar"
- },
- "VoltageCalibration": {
- "text2": [
- "Kalibrera",
- "inspänning?"
- ],
- "desc": "Inspänningskalibrering. Knapparna justerar, håll inne för avslut"
- },
- "AdvancedSoldering": {
- "text2": [
- "Detaljerad",
- "lödng.skärm"
- ],
- "desc": "Visa detaljerad information vid lödning"
- },
"ScrollingSpeed": {
"text2": [
"Beskrivning",
@@ -210,89 +224,89 @@ ],
"desc": "Hastighet som den här texten rullar i"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "spänning"
+ "Omvända",
+ "+- knappar"
],
- "desc": "Maximal QC-spänning enheten skall efterfråga"
+ "desc": "Omvänd ordning för temperaturjustering via plus/minus knapparna"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.-",
+ "hastighet"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Max-",
- "effekt"
+ "Anim.",
+ "loop"
],
- "desc": "Maximal effekt som enheten kan använda (Watt)"
+ "desc": "Loopa animationer i huvudmeny"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Omvända",
- "+- knappar"
+ "Screen",
+ "brightness"
],
- "desc": "Omvänd ordning för temperaturjustering via plus/minus knapparna"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp.just",
- "korttryck"
+ "Invert",
+ "screen"
],
- "desc": "Temperaturjustering vid kort knapptryckning"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp.just",
- "långtryck"
+ "Boot logo",
+ "duration"
],
- "desc": "Temperaturjustering vid lång knapptryckning"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "Detaljerad",
+ "vid inaktiv"
],
- "desc": "Intensity of power of keep-awake-pulse (W=watt)"
+ "desc": "Visa detaljerad information i mindre typsnitt när inaktiv."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Sensor-",
- "känslght"
+ "Detaljerad",
+ "lödng.skärm"
],
- "desc": "Känslighet för halleffekt-sensorn för viloläges-detektering (0=Av | 1=minst känslig | ... | 9=mest känslig)"
+ "desc": "Visa detaljerad information vid lödning"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Tillåt lås",
- "via knappar"
+ "Max-",
+ "effekt"
],
- "desc": "Vid lödning, håll nere bägge knappar för att slå på lås (A=Av | T=Bara turbo | F=Fullt lås)"
+ "desc": "Maximal effekt som enheten kan använda (Watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimim-",
- "spänning"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Minimumspänning per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "Kalibrera",
+ "inspänning?"
],
- "desc": "Loopa animationer i huvudmeny"
+ "desc": "Inspänningskalibrering. Knapparna justerar, håll inne för avslut"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.-",
- "hastighet"
+ "Power",
+ "pulse"
],
- "desc": "Animationshastighet för ikoner i menyer (A=av | L=långsam | M=medel | S=snabb)"
+ "desc": "Intensity of power of keep-awake-pulse (W=watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "Keep-awake-pulse duration (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Fabriks-",
+ "inställ?"
+ ],
+ "desc": "Återställ alla inställningar"
+ },
"LanguageSwitch": {
"text2": [
"Språk:",
" SV Svenska"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_TR.json b/Translations/translation_TR.json index e44c8965..dc745039 100644 --- a/Translations/translation_TR.json +++ b/Translations/translation_TR.json @@ -104,104 +104,118 @@ "DCInCutoff": {
"text2": [
"GÇKYN",
- ""
+ "buttons"
],
- "desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. (DC 10V) (S 3.3V hücre başına)"
+ "desc": "While soldering, hold down both buttons to toggle locking them (K=Kapalı | B=boost mode only | F=full locking)"
},
- "SleepTemperature": {
+ "MinVolCell": {
"text2": [
- "BKSC",
+ "Minimum",
""
],
- "desc": "Bekleme Modu Sıcaklığı (C)"
+ "desc": "Bu yazının kayma hızı (Y=Yavaş | H=Hızlı)"
},
- "SleepTimeout": {
+ "QCMaxVoltage": {
"text2": [
- "BMZA",
- ""
+ "QC",
+ "voltage"
],
- "desc": "Bekleme Modu Zaman Aşımı (Dakika | Saniye)"
+ "desc": "Max QC voltage the iron should negotiate for"
},
- "ShutdownTimeout": {
+ "PDNegTimeout": {
"text2": [
- "KPTZA",
+ "PD",
""
],
- "desc": "Kapatma Zaman Aşımı (Dakika)"
+ "desc": "Görüntü Yönlendirme (R=Sağlak | L=Solak | O=Otomatik)"
},
- "MotionSensitivity": {
+ "BoostTemperature": {
"text2": [
- "HARHAS",
+ "YKSC",
""
],
- "desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+ "desc": "Yüksek Performans Modu Sıcaklığı"
},
- "TemperatureUnit": {
+ "AutoStart": {
"text2": [
- "SCKBRM",
- ""
+ "OTOBAŞ",
+ "+ - keys"
],
- "desc": "Sıcaklık Birimi (C=Celsius | F=Fahrenheit)"
+ "desc": "\"Düğme Yerleri Rotasyonu\" Sıcaklık ayar düğmelerinin yerini değiştirin"
},
- "AdvancedIdle": {
+ "TempChangeShortStep": {
"text2": [
- "AYRBİL",
- ""
+ "Temp change",
+ "short"
],
- "desc": "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster."
+ "desc": "Kısa basışlardaki sıcaklık derecesi atlama oranı"
},
- "DisplayRotation": {
+ "TempChangeLongStep": {
"text2": [
- "GRNYÖN",
+ "Temp change",
+ "sensitivity"
+ ],
+ "desc": "Sensitivity to magnets (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+ },
+ "LockingMode": {
+ "text2": [
+ "Allow locking",
""
],
- "desc": "Görüntü Yönlendirme (R=Sağlak | L=Solak | O=Otomatik)"
+ "desc": "Kapatma Zaman Aşımı (Dakika)"
},
- "BoostTemperature": {
+ "MotionSensitivity": {
"text2": [
- "YKSC",
+ "HARHAS",
""
],
- "desc": "Yüksek Performans Modu Sıcaklığı"
+ "desc": "\"Güç Kaynağı\". En düşük çalışma voltajını ayarlar. (DC 10V) (S 3.3V hücre başına)"
},
- "AutoStart": {
+ "SleepTemperature": {
"text2": [
- "OTOBAŞ",
+ "BKSC",
""
],
- "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)"
+ "desc": "Bekleme Modu Sıcaklığı (C)"
},
- "CooldownBlink": {
+ "SleepTimeout": {
"text2": [
- "SĞGÖST",
+ "BMZA",
""
],
- "desc": "Soğutma ekranında uç hala sıcakken derece gösterilsin."
+ "desc": "Bekleme Modu Zaman Aşımı (Dakika | Saniye)"
},
- "CalibrateCJC": {
+ "ShutdownTimeout": {
"text2": [
- "Calibrate CJC",
- "at next boot"
+ "KPTZA",
+ "pulse"
],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
+ "desc": "Güç girişi voltajı ölçüm yoğunluğunu sık tut."
},
- "SettingsReset": {
+ "HallEffSensitivity": {
"text2": [
- "SIFIRLA?",
+ "Hall sensor",
""
],
- "desc": "Bütün ayarları sıfırlar"
+ "desc": "Hareket Hassasiyeti (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
},
- "VoltageCalibration": {
+ "TemperatureUnit": {
"text2": [
- "VOL KAL?",
+ "SCKBRM",
""
],
- "desc": "Voltaj Girişi Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas."
+ "desc": "Boş ekranda ayrıntılı bilgileri daha küçük bir yazı tipi ile göster."
},
- "AdvancedSoldering": {
+ "DisplayRotation": {
"text2": [
- "GELLHM",
+ "GRNYÖN",
+ ""
+ ],
+ "desc": "Güç verildiğinde otomatik olarak lehimleme modunda başlat. (K=Kapalı | L=Lehimleme Modu | U=Uyku Modu | S=Uyku Modu Oda Sıcaklığı)"
+ },
+ "CooldownBlink": {
+ "text2": [
+ "SĞGÖST",
""
],
"desc": "\"Gelişmiş Lehimleme\" Lehimleme yaparken detaylı bilgi göster"
@@ -209,90 +223,90 @@ "ScrollingSpeed": {
"text2": [
"YZKYHZ",
- ""
+ "limit"
],
- "desc": "Bu yazının kayma hızı (Y=Yavaş | H=Hızlı)"
+ "desc": "Havyanın kullanacağı en yüksek güç (Watts)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "voltage"
+ "Swap",
+ "loop"
],
- "desc": "Max QC voltage the iron should negotiate for"
+ "desc": "Loop icon animations in main menu"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "timeout"
+ "Anim.",
+ "voltage"
],
- "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
+ "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Power",
- "limit"
+ "Anim.",
+ " TR Türkçe"
],
- "desc": "Havyanın kullanacağı en yüksek güç (Watts)"
+ "desc": ""
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Swap",
- "+ - keys"
+ "Screen",
+ "brightness"
],
- "desc": "\"Düğme Yerleri Rotasyonu\" Sıcaklık ayar düğmelerinin yerini değiştirin"
+ "desc": "Adjust the OLED screen brightness"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Temp change",
- "short"
+ "Invert",
+ "screen"
],
- "desc": "Kısa basışlardaki sıcaklık derecesi atlama oranı"
+ "desc": "Invert the OLED screen colors"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Temp change",
- "long"
+ "Boot logo",
+ ""
],
- "desc": "Uzun başışlardaki sıcaklık derecesi atlama oranı"
+ "desc": "Sıcaklık Birimi (C=Celsius | F=Fahrenheit)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Power",
- "pulse"
+ "AYRBİL",
+ ""
],
- "desc": "Güç girişi voltajı ölçüm yoğunluğunu sık tut."
+ "desc": "Voltaj Girişi Kalibrasyonu. Düğmeler ayarlar, çıkmak için uzun bas."
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall sensor",
- "sensitivity"
+ "GELLHM",
+ "timeout"
],
- "desc": "Sensitivity to magnets (0=Kapalı | 1=En az duyarlı | ... | 9=En duyarlı)"
+ "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Allow locking",
- "buttons"
+ "Power",
+ ""
],
- "desc": "While soldering, hold down both buttons to toggle locking them (K=Kapalı | B=boost mode only | F=full locking)"
+ "desc": "Soğutma ekranında uç hala sıcakken derece gösterilsin."
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Minimum",
- "voltage"
+ "Calibrate CJC",
+ ""
],
- "desc": "Minimum allowed voltage per battery cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Bütün ayarları sıfırlar"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Anim.",
- "loop"
+ "VOL KAL?",
+ "long"
],
- "desc": "Loop icon animations in main menu"
+ "desc": "Uzun başışlardaki sıcaklık derecesi atlama oranı"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Anim.",
+ "Power",
"speed"
],
"desc": "Pace of icon animations in menu (K=Kapalı | Y=Yavaş | O=Orta | H=Hızlı)"
@@ -307,6 +321,13 @@ "PowerPulseDuration": {
"text2": [
"Power pulse",
+ "at next boot"
+ ],
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
+ },
+ "SettingsReset": {
+ "text2": [
+ "SIFIRLA?",
"duration"
],
"desc": "Keep-awake-pulse duration (x 250ms)"
@@ -314,27 +335,6 @@ "LanguageSwitch": {
"text2": [
"Dil:",
- " TR Türkçe"
- ],
- "desc": ""
- },
- "Brightness": {
- "text2": [
- "Screen",
- "brightness"
- ],
- "desc": "Adjust the OLED screen brightness"
- },
- "ColourInversion": {
- "text2": [
- "Invert",
- "screen"
- ],
- "desc": "Invert the OLED screen colors"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
"duration"
],
"desc": "Set boot logo duration (s=seconds)"
diff --git a/Translations/translation_UK.json b/Translations/translation_UK.json index 7bf81fa4..13128c6d 100644 --- a/Translations/translation_UK.json +++ b/Translations/translation_UK.json @@ -106,6 +106,69 @@ ],
"desc": "Встановлює напругу відсічки. (DC - 10V) (3S - 9.9V | 4S - 13.2V | 5S - 16.5V | 6S - 19.8V)"
},
+ "MinVolCell": {
+ "text2": [
+ "Мін.",
+ "напруга"
+ ],
+ "desc": "Мінімальна дозволена напруга на комірку (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "Потужність",
+ "дж. живлення"
+ ],
+ "desc": "Потужність джерела живлення в Ватах"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "затримка"
+ ],
+ "desc": "Затримка у 100мс інкрементах для PD для сумісності з деякими QC зарядними пристроями (0: вимкнено)"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Темпер.",
+ "Турбо"
+ ],
+ "desc": "Температура в \"Турбо\" режимі"
+ },
+ "AutoStart": {
+ "text2": [
+ "Гарячий",
+ "старт"
+ ],
+ "desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Зміна темп.",
+ "коротко?"
+ ],
+ "desc": "Змінювати температуру при короткому натисканні!"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Зміна темп.",
+ "довго?"
+ ],
+ "desc": "Змінювати температуру при довгому натисканні!"
+ },
+ "LockingMode": {
+ "text2": [
+ "Дозволити",
+ "блок. кнопок"
+ ],
+ "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Чутливість",
+ "сенсору руху"
+ ],
+ "desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+ },
"SleepTemperature": {
"text2": [
"Темпер.",
@@ -127,12 +190,12 @@ ],
"desc": "Час до вимкнення (Хвилини)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
"Чутливість",
- "сенсору руху"
+ "Ефекту Холла"
],
- "desc": "Акселерометр (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+ "desc": "Чутливість датчика ефекту Холла при виявленні сну (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
},
"TemperatureUnit": {
"text2": [
@@ -141,13 +204,6 @@ ],
"desc": "Одиниця виміру температури (C=Цельсій | F=Фаренгейт)"
},
- "AdvancedIdle": {
- "text2": [
- "Детальний ре-",
- "жим очікуван."
- ],
- "desc": "Показувати детальну інформацію маленьким шрифтом на домашньому екрані"
- },
"DisplayRotation": {
"text2": [
"Автоповорот",
@@ -155,20 +211,6 @@ ],
"desc": "Орієнтація дисплея (П=Правша | Л=Лівша | A=Автоповорот)"
},
- "BoostTemperature": {
- "text2": [
- "Темпер.",
- "Турбо"
- ],
- "desc": "Температура в \"Турбо\" режимі"
- },
- "AutoStart": {
- "text2": [
- "Гарячий",
- "старт"
- ],
- "desc": "Режим в якому запускається паяльник при ввімкненні (В=Вимк. | П=Пайка | О=Очікування | К=Очікування при кімн. темп.)"
- },
"CooldownBlink": {
"text2": [
"Показ t° при",
@@ -176,34 +218,6 @@ ],
"desc": "Показувати температуру на екрані охолодження, поки жало залишається гарячим, при цьому екран моргає"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Скинути всі",
- "налаштування?"
- ],
- "desc": "Скидання всіх параметрів до стандартних значень."
- },
- "VoltageCalibration": {
- "text2": [
- "Калібрування",
- "напруги"
- ],
- "desc": "Калібрування напруги входу. Налаштувати кнопками, натиснути і утримати щоб завершити."
- },
- "AdvancedSoldering": {
- "text2": [
- "Детальний",
- "режим пайки"
- ],
- "desc": "Показувати детальну інформацію при пайці."
- },
"ScrollingSpeed": {
"text2": [
"Швидкість",
@@ -211,89 +225,89 @@ ],
"desc": "Швидкість прокрутки тексту (П=повільно | Ш=швидко)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "Потужність",
- "дж. живлення"
+ "Інвертувати",
+ "кнопки +-?"
],
- "desc": "Потужність джерела живлення в Ватах"
+ "desc": "Інвертувати кнопки зміни температури."
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "затримка"
+ "Швидкість",
+ "анімації"
],
- "desc": "Затримка у 100мс інкрементах для PD для сумісності з деякими QC зарядними пристроями (0: вимкнено)"
+ "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Макс.",
- "потуж."
+ "Циклічна",
+ "анімація"
],
- "desc": "Макс. потужність, яку може використовувати паяльник (Ват)"
+ "desc": "Циклічна анімація іконок в головному меню"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Інвертувати",
- "кнопки +-?"
+ "Яскравість",
+ "екрану"
],
- "desc": "Інвертувати кнопки зміни температури."
+ "desc": "Налаштування контрасту/яскравості OLED екрану"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Зміна темп.",
- "коротко?"
+ "Інверт",
+ "екрану"
],
- "desc": "Змінювати температуру при короткому натисканні!"
+ "desc": "Інвертувати кольори на OLED екрані"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Зміна темп.",
- "довго?"
+ "Тривалість",
+ "логотипу завантаження"
],
- "desc": "Змінювати температуру при довгому натисканні!"
+ "desc": "Встановити тривалість показу лого при завантаженні (с=секунд)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Пульс.",
- "Навантаж."
+ "Детальний ре-",
+ "жим очікуван."
],
- "desc": "Деякі PowerBank-и з часом вимк. живлення, якщо пристрій споживає дуже мало енергії)"
+ "desc": "Показувати детальну інформацію маленьким шрифтом на домашньому екрані"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Чутливість",
- "Ефекту Холла"
+ "Детальний",
+ "режим пайки"
],
- "desc": "Чутливість датчика ефекту Холла при виявленні сну (0=Вимк. | 1=мін. чутливості | ... | 9=макс. чутливості)"
+ "desc": "Показувати детальну інформацію при пайці."
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Дозволити",
- "блок. кнопок"
+ "Макс.",
+ "потуж."
],
- "desc": "Під час пайки тривале натискання обох кнопок заблокує їх (В=Вимк | Т=Тільки турбо | П=Повне)"
+ "desc": "Макс. потужність, яку може використовувати паяльник (Ват)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Мін.",
- "напруга"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Мінімальна дозволена напруга на комірку (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Циклічна",
- "анімація"
+ "Калібрування",
+ "напруги"
],
- "desc": "Циклічна анімація іконок в головному меню"
+ "desc": "Калібрування напруги входу. Налаштувати кнопками, натиснути і утримати щоб завершити."
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Швидкість",
- "анімації"
+ "Пульс.",
+ "Навантаж."
],
- "desc": "Швидкість анімації іконок у головному меню (Мілісекунди) (В=Вимк | Н=Низькa | С=Середня | М=Макс)"
+ "desc": "Деякі PowerBank-и з часом вимк. живлення, якщо пристрій споживає дуже мало енергії)"
},
"PowerPulseWait": {
"text2": [
@@ -309,33 +323,19 @@ ],
"desc": "Тривалість імпульсу напруги яка не дає PowerBank-у заснути (x 250мс)"
},
+ "SettingsReset": {
+ "text2": [
+ "Скинути всі",
+ "налаштування?"
+ ],
+ "desc": "Скидання всіх параметрів до стандартних значень."
+ },
"LanguageSwitch": {
"text2": [
"Мова:",
" UK Українська"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Яскравість",
- "екрану"
- ],
- "desc": "Налаштування контрасту/яскравості OLED екрану"
- },
- "ColourInversion": {
- "text2": [
- "Інверт",
- "екрану"
- ],
- "desc": "Інвертувати кольори на OLED екрані"
- },
- "LOGOTime": {
- "text2": [
- "Тривалість",
- "логотипу завантаження"
- ],
- "desc": "Встановити тривалість показу лого при завантаженні (с=секунд)"
}
}
}
diff --git a/Translations/translation_VI.json b/Translations/translation_VI.json index f74f15e7..8193665e 100644 --- a/Translations/translation_VI.json +++ b/Translations/translation_VI.json @@ -105,6 +105,69 @@ ],
"desc": "Nguon đien, đat đien áp giam. (DC 10V) (S 3.3V moi cell, tat gioi han công suat)"
},
+ "MinVolCell": {
+ "text2": [
+ "Voltage",
+ "toi thieu"
+ ],
+ "desc": "Đien áp toi thieu cho phép trên moi cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ },
+ "QCMaxVoltage": {
+ "text2": [
+ "QC",
+ "voltage"
+ ],
+ "desc": "Đien áp QC toi đa mà tay hàn yêu cau"
+ },
+ "PDNegTimeout": {
+ "text2": [
+ "PD",
+ "sau"
+ ],
+ "desc": "Thoi gian cho đàm phán PD trong các buoc 100ms đe tuong thích voi mot so bo sac QC"
+ },
+ "BoostTemperature": {
+ "text2": [
+ "Tăng",
+ "nhiet đo"
+ ],
+ "desc": "Nhiet đo dùng trong che đo \"tăng cuong\""
+ },
+ "AutoStart": {
+ "text2": [
+ "Nhiet đo",
+ "đang tăng"
+ ],
+ "desc": "- O=tat | S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong"
+ },
+ "TempChangeShortStep": {
+ "text2": [
+ "Thay đoi n.đo",
+ "an nút nhanh"
+ ],
+ "desc": "Biên đo tăng/giam nhiet đo khi an nút nhanh"
+ },
+ "TempChangeLongStep": {
+ "text2": [
+ "Thay đoi n.đo",
+ "an nút lâu"
+ ],
+ "desc": "Biên đo tăng/giam nhiet đo khi an nút lâu"
+ },
+ "LockingMode": {
+ "text2": [
+ "Cho phép khóa",
+ "các nút"
+ ],
+ "desc": "Trong khi hàn, giu ca 2 nút đe khóa(D=tat | B=chi che đo tăng cuong | F=khóa hoàn toàn)"
+ },
+ "MotionSensitivity": {
+ "text2": [
+ "Cam bien",
+ "cu đong"
+ ],
+ "desc": "- 0=tat | 1=đo nhay thap nhat| ... | 9=đo nhay cao nhat"
+ },
"SleepTemperature": {
"text2": [
"Nhiet đo",
@@ -126,12 +189,12 @@ ],
"desc": "- khoang thoi gian truoc khi tay hàn tat (m=phút)"
},
- "MotionSensitivity": {
+ "HallEffSensitivity": {
"text2": [
- "Cam bien",
- "cu đong"
+ "Hall",
+ "đo nhay"
],
- "desc": "- 0=tat | 1=đo nhay thap nhat| ... | 9=đo nhay cao nhat"
+ "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (0=tat | 1=ít nhay nhat |...| 9=nhay nhat)"
},
"TemperatureUnit": {
"text2": [
@@ -140,13 +203,6 @@ ],
"desc": "C= Đo C | F= Đo F"
},
- "AdvancedIdle": {
- "text2": [
- "Chi tiet",
- "màn hình cho"
- ],
- "desc": "- hien thi thông tin chi tiet bang phông chu nho hon trên màn hình cho"
- },
"DisplayRotation": {
"text2": [
"Huong",
@@ -154,20 +210,6 @@ ],
"desc": "- R=huong tay phai | L=huong tay trái | A=tu đong"
},
- "BoostTemperature": {
- "text2": [
- "Tăng",
- "nhiet đo"
- ],
- "desc": "Nhiet đo dùng trong che đo \"tăng cuong\""
- },
- "AutoStart": {
- "text2": [
- "Nhiet đo",
- "đang tăng"
- ],
- "desc": "- O=tat | S=nhiet đo hàn | Z=cho o nhiet đo ngu đen khi cu đong | R=cho mà không gia nhiet đen khi cu đong"
- },
"CooldownBlink": {
"text2": [
"Nguoi đi",
@@ -175,34 +217,6 @@ ],
"desc": "-Nhap nháy nhiet đo sau khi viec gia nhiet tam dung trong khi mui hàn van nóng"
},
- "CalibrateCJC": {
- "text2": [
- "Calibrate CJC",
- "at next boot"
- ],
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
- },
- "SettingsReset": {
- "text2": [
- "Khôi phuc",
- "cài đat goc?"
- ],
- "desc": "-đat lai tat ca cài đat ve mac đinh"
- },
- "VoltageCalibration": {
- "text2": [
- "Hieu chinh",
- "đien áp đau vào?"
- ],
- "desc": "-bat đau hieu chuan VIN (nhan và giu đe thoát)"
- },
- "AdvancedSoldering": {
- "text2": [
- "Chi tiet",
- "màn hình hàn"
- ],
- "desc": "-Hien thi thông tin bang phông chu nho hon trên màn hình hàn"
- },
"ScrollingSpeed": {
"text2": [
"Toc đo",
@@ -210,89 +224,89 @@ ],
"desc": "Toc đo cuon văn ban(S=cham | F=nhanh)"
},
- "QCMaxVoltage": {
+ "ReverseButtonTempChange": {
"text2": [
- "QC",
- "voltage"
+ "Đao nguoc",
+ "nút + -"
],
- "desc": "Đien áp QC toi đa mà tay hàn yêu cau"
+ "desc": "Đao nguoc chuc năng các nút đieu chinh nhiet đo"
},
- "PDNegTimeout": {
+ "AnimSpeed": {
"text2": [
- "PD",
- "sau"
+ "Toc đo",
+ "hoat anh"
],
- "desc": "Thoi gian cho đàm phán PD trong các buoc 100ms đe tuong thích voi mot so bo sac QC"
+ "desc": "-Toc đo cua hoat anh menu (O=tat | S=cham | M=trung bình | F=nhanh)"
},
- "PowerLimit": {
+ "AnimLoop": {
"text2": [
- "Công suat",
- "gioi han"
+ "Hoat anh",
+ "lap lai"
],
- "desc": "-Công suat toi đa mà tay hàn có the su dung (W=watt)"
+ "desc": "Lap lai các hoat anh trong màn hình chính"
},
- "ReverseButtonTempChange": {
+ "Brightness": {
"text2": [
- "Đao nguoc",
- "nút + -"
+ "Đo tuong phan",
+ "màn hình"
],
- "desc": "Đao nguoc chuc năng các nút đieu chinh nhiet đo"
+ "desc": "-Đieu chinh đo sáng màn hình OLED"
},
- "TempChangeShortStep": {
+ "ColourInversion": {
"text2": [
- "Thay đoi n.đo",
- "an nút nhanh"
+ "Đao nguoc màu",
+ "màn hình"
],
- "desc": "Biên đo tăng/giam nhiet đo khi an nút nhanh"
+ "desc": "-Đao nguoc màu màn hình OLED"
},
- "TempChangeLongStep": {
+ "LOGOTime": {
"text2": [
- "Thay đoi n.đo",
- "an nút lâu"
+ "Boot logo",
+ "duration"
],
- "desc": "Biên đo tăng/giam nhiet đo khi an nút lâu"
+ "desc": "Set boot logo duration (s=seconds)"
},
- "PowerPulsePower": {
+ "AdvancedIdle": {
"text2": [
- "Công suat",
- "kích nguon"
+ "Chi tiet",
+ "màn hình cho"
],
- "desc": "-Cuong đo công suat kích nguon (watt)"
+ "desc": "- hien thi thông tin chi tiet bang phông chu nho hon trên màn hình cho"
},
- "HallEffSensitivity": {
+ "AdvancedSoldering": {
"text2": [
- "Hall",
- "đo nhay"
+ "Chi tiet",
+ "màn hình hàn"
],
- "desc": "Đo nhay cam bien Hall đe phát hien che đo ngu (0=tat | 1=ít nhay nhat |...| 9=nhay nhat)"
+ "desc": "-Hien thi thông tin bang phông chu nho hon trên màn hình hàn"
},
- "LockingMode": {
+ "PowerLimit": {
"text2": [
- "Cho phép khóa",
- "các nút"
+ "Công suat",
+ "gioi han"
],
- "desc": "Trong khi hàn, giu ca 2 nút đe khóa(D=tat | B=chi che đo tăng cuong | F=khóa hoàn toàn)"
+ "desc": "-Công suat toi đa mà tay hàn có the su dung (W=watt)"
},
- "MinVolCell": {
+ "CalibrateCJC": {
"text2": [
- "Voltage",
- "toi thieu"
+ "Calibrate CJC",
+ "at next boot"
],
- "desc": "Đien áp toi thieu cho phép trên moi cell (3S: 3 - 3,7V | 4-6S: 2,4 - 3,7V)"
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5°C)"
},
- "AnimLoop": {
+ "VoltageCalibration": {
"text2": [
- "Hoat anh",
- "lap lai"
+ "Hieu chinh",
+ "đien áp đau vào?"
],
- "desc": "Lap lai các hoat anh trong màn hình chính"
+ "desc": "-bat đau hieu chuan VIN (nhan và giu đe thoát)"
},
- "AnimSpeed": {
+ "PowerPulsePower": {
"text2": [
- "Toc đo",
- "hoat anh"
+ "Công suat",
+ "kích nguon"
],
- "desc": "-Toc đo cua hoat anh menu (O=tat | S=cham | M=trung bình | F=nhanh)"
+ "desc": "-Cuong đo công suat kích nguon (watt)"
},
"PowerPulseWait": {
"text2": [
@@ -308,33 +322,19 @@ ],
"desc": "-thoi luong kích nguon (x 250ms)"
},
+ "SettingsReset": {
+ "text2": [
+ "Khôi phuc",
+ "cài đat goc?"
+ ],
+ "desc": "-đat lai tat ca cài đat ve mac đinh"
+ },
"LanguageSwitch": {
"text2": [
"Ngôn ngu:",
"VI Tieng Viet"
],
"desc": ""
- },
- "Brightness": {
- "text2": [
- "Đo tuong phan",
- "màn hình"
- ],
- "desc": "-Đieu chinh đo sáng màn hình OLED"
- },
- "ColourInversion": {
- "text2": [
- "Đao nguoc màu",
- "màn hình"
- ],
- "desc": "-Đao nguoc màu màn hình OLED"
- },
- "LOGOTime": {
- "text2": [
- "Boot logo",
- "duration"
- ],
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_YUE_HK.json b/Translations/translation_YUE_HK.json index 29182e09..4ef412d4 100644 --- a/Translations/translation_YUE_HK.json +++ b/Translations/translation_YUE_HK.json @@ -75,6 +75,42 @@ "text2": "電源",
"desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每粒3.3V計算；依個設定會停用功率限制>"
},
+ "MinVolCell": {
+ "text2": "最低電壓",
+ "desc": "每粒電池嘅最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+ },
+ "QCMaxVoltage": {
+ "text2": "QC電壓",
+ "desc": "使用QC電源時請求嘅最高目標電壓"
+ },
+ "PDNegTimeout": {
+ "text2": "PD逾時",
+ "desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"
+ },
+ "BoostTemperature": {
+ "text2": "增熱温度",
+ "desc": "喺增熱模式時使用嘅温度"
+ },
+ "AutoStart": {
+ "text2": "自動啓用",
+ "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"
+ },
+ "TempChangeShortStep": {
+ "text2": "温度調整 短",
+ "desc": "調校温度時短撳一下嘅温度變幅"
+ },
+ "TempChangeLongStep": {
+ "text2": "温度調整 長",
+ "desc": "調校温度時長撳嘅温度變幅"
+ },
+ "LockingMode": {
+ "text2": "撳掣鎖定",
+ "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"
+ },
+ "MotionSensitivity": {
+ "text2": "動作敏感度",
+ "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+ },
"SleepTemperature": {
"text2": "待機温度",
"desc": "喺待機模式時嘅焫雞咀温度"
@@ -87,102 +123,74 @@ "text2": "自動熄機",
"desc": "自動熄機前嘅閒置等候時間 <m=分鐘>"
},
- "MotionSensitivity": {
- "text2": "動作敏感度",
- "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+ "HallEffSensitivity": {
+ "text2": "磁場敏感度",
+ "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
},
"TemperatureUnit": {
"text2": "温度單位",
"desc": "C=攝氏 | F=華氏"
},
- "AdvancedIdle": {
- "text2": "詳細閒置畫面",
- "desc": "喺閒置畫面以英文細字顯示詳細嘅資料"
- },
"DisplayRotation": {
"text2": "畫面方向",
"desc": "右=使用右手 | 左=使用左手 | 自=自動"
},
- "BoostTemperature": {
- "text2": "增熱温度",
- "desc": "喺增熱模式時使用嘅温度"
- },
- "AutoStart": {
- "text2": "自動啓用",
- "desc": "開機時自動啓用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室温待機>"
- },
"CooldownBlink": {
"text2": "降温時閃爍",
"desc": "停止加熱之後，當焫雞咀仲係熱嗰陣閃爍畫面"
},
- "CalibrateCJC": {
- "text2": "Calibrate CJC",
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
+ "ScrollingSpeed": {
+ "text2": "捲動速度",
+ "desc": "解說文字嘅捲動速度"
},
- "SettingsReset": {
- "text2": "全部重設？",
- "desc": "將所有設定重設到預設值"
+ "ReverseButtonTempChange": {
+ "text2": "反轉加減掣",
+ "desc": "反轉調校温度時加減掣嘅方向"
},
- "VoltageCalibration": {
- "text2": "輸入電壓校正？",
- "desc": "開始校正VIN輸入電壓 <長撳以退出>"
+ "AnimSpeed": {
+ "text2": "動畫速度",
+ "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
},
- "AdvancedSoldering": {
- "text2": "詳細焊接畫面",
- "desc": "喺焊接模式畫面以英文細字顯示詳細嘅資料"
+ "AnimLoop": {
+ "text2": "動畫循環",
+ "desc": "循環顯示功能表圖示動畫"
},
- "ScrollingSpeed": {
- "text2": "捲動速度",
- "desc": "解說文字嘅捲動速度"
+ "Brightness": {
+ "text2": "熒幕亮度",
+ "desc": "設定OLED熒幕嘅亮度"
},
- "QCMaxVoltage": {
- "text2": "QC電壓",
- "desc": "使用QC電源時請求嘅最高目標電壓"
+ "ColourInversion": {
+ "text2": "熒幕反轉色",
+ "desc": "反轉OLED熒幕嘅黑白色"
},
- "PDNegTimeout": {
- "text2": "PD逾時",
- "desc": "設定USB PD協定交涉嘅逾時時限；為兼容某啲QC電源而設 <x100ms（亳秒）>"
+ "LOGOTime": {
+ "text2": "Boot logo duration",
+ "desc": "Set boot logo duration (s=seconds)"
+ },
+ "AdvancedIdle": {
+ "text2": "詳細閒置畫面",
+ "desc": "喺閒置畫面以英文細字顯示詳細嘅資料"
+ },
+ "AdvancedSoldering": {
+ "text2": "詳細焊接畫面",
+ "desc": "喺焊接模式畫面以英文細字顯示詳細嘅資料"
},
"PowerLimit": {
"text2": "功率限制",
"desc": "限制焫雞可用嘅最大功率 <W=watt（火）>"
},
- "ReverseButtonTempChange": {
- "text2": "反轉加減掣",
- "desc": "反轉調校温度時加減掣嘅方向"
- },
- "TempChangeShortStep": {
- "text2": "温度調整 短",
- "desc": "調校温度時短撳一下嘅温度變幅"
+ "CalibrateCJC": {
+ "text2": "Calibrate CJC",
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
},
- "TempChangeLongStep": {
- "text2": "温度調整 長",
- "desc": "調校温度時長撳嘅温度變幅"
+ "VoltageCalibration": {
+ "text2": "輸入電壓校正？",
+ "desc": "開始校正VIN輸入電壓 <長撳以退出>"
},
"PowerPulsePower": {
"text2": "電源脈衝",
"desc": "為保持電源喚醒而通電所用嘅功率 <watt（火）>"
},
- "HallEffSensitivity": {
- "text2": "磁場敏感度",
- "desc": "磁場感應器用嚟啓動待機模式嘅敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
- },
- "LockingMode": {
- "text2": "撳掣鎖定",
- "desc": "喺焊接模式時，同時長撳兩粒掣啓用撳掣鎖定 <無=停用 | 增=淨係容許增熱模式 | 全=鎖定全部>"
- },
- "MinVolCell": {
- "text2": "最低電壓",
- "desc": "每粒電池嘅最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
- },
- "AnimLoop": {
- "text2": "動畫循環",
- "desc": "循環顯示功能表圖示動畫"
- },
- "AnimSpeed": {
- "text2": "動畫速度",
- "desc": "功能表圖示動畫嘅速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
- },
"PowerPulseWait": {
"text2": "電源脈衝間隔",
"desc": "為保持電源喚醒，每次通電之間嘅間隔時間 <x2.5s（秒）>"
@@ -191,21 +199,13 @@ "text2": "電源脈衝時長",
"desc": "為保持電源喚醒，每次通電脈衝嘅時間長度 <x250ms（亳秒）>"
},
+ "SettingsReset": {
+ "text2": "全部重設？",
+ "desc": "將所有設定重設到預設值"
+ },
"LanguageSwitch": {
"text2": "語言： 廣東話",
"desc": ""
- },
- "Brightness": {
- "text2": "熒幕亮度",
- "desc": "設定OLED熒幕嘅亮度"
- },
- "ColourInversion": {
- "text2": "熒幕反轉色",
- "desc": "反轉OLED熒幕嘅黑白色"
- },
- "LOGOTime": {
- "text2": "Boot logo duration",
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json index c2fba2a3..056bc259 100644 --- a/Translations/translation_ZH_CN.json +++ b/Translations/translation_ZH_CN.json @@ -75,6 +75,42 @@ "text2": "下限电压",
"desc": "设置自动停机电压 <DC=10V | S=（串）每节锂电池3.3V；此设置会禁用功率限制>"
},
+ "MinVolCell": {
+ "text2": "最低电压",
+ "desc": "每节电池的最低允许电压 <V（伏特）> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+ },
+ "QCMaxVoltage": {
+ "text2": "QC电压",
+ "desc": "使用QC电源时请求的最高目标电压"
+ },
+ "PDNegTimeout": {
+ "text2": "PD超时",
+ "desc": "设定USB-PD协议交涉的超时时限；为兼容某些QC电源而设 <x100ms（亳秒）>"
+ },
+ "BoostTemperature": {
+ "text2": "增热温度",
+ "desc": "增热模式时使用的温度"
+ },
+ "AutoStart": {
+ "text2": "自动启动",
+ "desc": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
+ },
+ "TempChangeShortStep": {
+ "text2": "短按温度调整",
+ "desc": "调校温度时短按按键的温度变幅"
+ },
+ "TempChangeLongStep": {
+ "text2": "长按温度调整",
+ "desc": "调校温度时长按按键的温度变幅"
+ },
+ "LockingMode": {
+ "text2": "按键锁定",
+ "desc": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>"
+ },
+ "MotionSensitivity": {
+ "text2": "动作灵敏度",
+ "desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
+ },
"SleepTemperature": {
"text2": "待机温度",
"desc": "待机模式时的烙铁头温度"
@@ -87,102 +123,74 @@ "text2": "自动关机",
"desc": "自动关机前的等候时间 <m=分钟>"
},
- "MotionSensitivity": {
- "text2": "动作灵敏度",
- "desc": "0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度"
+ "HallEffSensitivity": {
+ "text2": "磁场灵敏度",
+ "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>"
},
"TemperatureUnit": {
"text2": "温度单位",
"desc": "C=摄氏 | F=华氏"
},
- "AdvancedIdle": {
- "text2": "闲置画面详情",
- "desc": "闲置画面以英语小字体显示详情"
- },
"DisplayRotation": {
"text2": "显示方向",
"desc": "右=右手 | 左=左手 | 自=自动"
},
- "BoostTemperature": {
- "text2": "增热温度",
- "desc": "增热模式时使用的温度"
- },
- "AutoStart": {
- "text2": "自动启动",
- "desc": "开机时自动启动 <无=禁用 | 焊=焊接模式 | 待=待机模式 | 室=室温待机>"
- },
"CooldownBlink": {
"text2": "降温时闪显",
"desc": "停止加热之后，闪动温度显示提醒烙铁头仍处于高温状态"
},
- "CalibrateCJC": {
- "text2": "Calibrate CJC",
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
+ "ScrollingSpeed": {
+ "text2": "滚动速度",
+ "desc": "解说文字的滚动速度"
},
- "SettingsReset": {
- "text2": "全部重置？",
- "desc": "将所有设定重置为默认值"
+ "ReverseButtonTempChange": {
+ "text2": "调换加减键",
+ "desc": "调校温度时更换加减键的方向"
},
- "VoltageCalibration": {
- "text2": "输入电压校正？",
- "desc": "开始校正输入电压（VIN）<长按以退出>"
+ "AnimSpeed": {
+ "text2": "动画速度",
+ "desc": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
},
- "AdvancedSoldering": {
- "text2": "焊接画面详情",
- "desc": "焊接模式画面以英语小字体显示详请"
+ "AnimLoop": {
+ "text2": "动画循环",
+ "desc": "主菜单中循环播放功能图标动画"
},
- "ScrollingSpeed": {
- "text2": "滚动速度",
- "desc": "解说文字的滚动速度"
+ "Brightness": {
+ "text2": "屏幕亮度",
+ "desc": "调整OLED屏幕的亮度"
},
- "QCMaxVoltage": {
- "text2": "QC电压",
- "desc": "使用QC电源时请求的最高目标电压"
+ "ColourInversion": {
+ "text2": "反转屏幕颜色",
+ "desc": "反转OLED黑/白屏幕"
},
- "PDNegTimeout": {
- "text2": "PD超时",
- "desc": "设定USB-PD协议交涉的超时时限；为兼容某些QC电源而设 <x100ms（亳秒）>"
+ "LOGOTime": {
+ "text2": "Boot logo duration",
+ "desc": "Set boot logo duration (s=seconds)"
+ },
+ "AdvancedIdle": {
+ "text2": "闲置画面详情",
+ "desc": "闲置画面以英语小字体显示详情"
+ },
+ "AdvancedSoldering": {
+ "text2": "焊接画面详情",
+ "desc": "焊接模式画面以英语小字体显示详请"
},
"PowerLimit": {
"text2": "功率限制",
"desc": "限制烙铁可用的最大功率 <W=瓦特>"
},
- "ReverseButtonTempChange": {
- "text2": "调换加减键",
- "desc": "调校温度时更换加减键的方向"
- },
- "TempChangeShortStep": {
- "text2": "短按温度调整",
- "desc": "调校温度时短按按键的温度变幅"
+ "CalibrateCJC": {
+ "text2": "Calibrate CJC",
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
},
- "TempChangeLongStep": {
- "text2": "长按温度调整",
- "desc": "调校温度时长按按键的温度变幅"
+ "VoltageCalibration": {
+ "text2": "输入电压校正？",
+ "desc": "开始校正输入电压（VIN）<长按以退出>"
},
"PowerPulsePower": {
"text2": "电源脉冲",
"desc": "为保持电源处于唤醒状态所用的功率 <Watt（瓦特）>"
},
- "HallEffSensitivity": {
- "text2": "磁场灵敏度",
- "desc": "霍尔效应传感器用作启动待机模式的灵敏度 <0=禁用 | 1=最低灵敏度 | ... | 9=最高灵敏度>"
- },
- "LockingMode": {
- "text2": "按键锁定",
- "desc": "焊接模式时，同时长按两个按键启用按键锁定 <无=禁用 | 增=只容许增热模式 | 全=完全锁定>"
- },
- "MinVolCell": {
- "text2": "最低电压",
- "desc": "每节电池的最低允许电压 <V（伏特）> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
- },
- "AnimLoop": {
- "text2": "动画循环",
- "desc": "主菜单中循环播放功能图标动画"
- },
- "AnimSpeed": {
- "text2": "动画速度",
- "desc": "主菜单中功能图标动画的播放速度 <关=不显示动画 | 慢=慢速 | 中=中速 | 快=快速>"
- },
"PowerPulseWait": {
"text2": "电源脉冲间隔",
"desc": "为保持电源处于唤醒状态，每次通电之间的间隔时间 <x2.5s（秒）>"
@@ -191,21 +199,13 @@ "text2": "电源脉冲时长",
"desc": "为保持电源处于唤醒状态，每次通电脉冲的时间长度 <x250ms（亳秒）>"
},
+ "SettingsReset": {
+ "text2": "全部重置？",
+ "desc": "将所有设定重置为默认值"
+ },
"LanguageSwitch": {
"text2": "语言：简体中文",
"desc": ""
- },
- "Brightness": {
- "text2": "屏幕亮度",
- "desc": "调整OLED屏幕的亮度"
- },
- "ColourInversion": {
- "text2": "反转屏幕颜色",
- "desc": "反转OLED黑/白屏幕"
- },
- "LOGOTime": {
- "text2": "Boot logo duration",
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
diff --git a/Translations/translation_ZH_TW.json b/Translations/translation_ZH_TW.json index b69b4425..e32ad573 100644 --- a/Translations/translation_ZH_TW.json +++ b/Translations/translation_ZH_TW.json @@ -75,6 +75,42 @@ "text2": "電源",
"desc": "輸入電源；設定自動停機電壓 <DC 10V> <S 鋰電池，以每顆3.3V計算；此設定會停用功率限制>"
},
+ "MinVolCell": {
+ "text2": "最低電壓",
+ "desc": "每顆電池的最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
+ },
+ "QCMaxVoltage": {
+ "text2": "QC電壓",
+ "desc": "使用QC電源時請求的最高目標電壓"
+ },
+ "PDNegTimeout": {
+ "text2": "PD逾時",
+ "desc": "設定USB PD協定交涉的逾時時限；為兼容某些QC電源而設 <x100ms（亳秒）>"
+ },
+ "BoostTemperature": {
+ "text2": "增熱溫度",
+ "desc": "於增熱模式時使用的溫度"
+ },
+ "AutoStart": {
+ "text2": "自動啟用",
+ "desc": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>"
+ },
+ "TempChangeShortStep": {
+ "text2": "溫度調整 短",
+ "desc": "調校溫度時短按一下的溫度變幅"
+ },
+ "TempChangeLongStep": {
+ "text2": "溫度調整 長",
+ "desc": "調校溫度時長按按鍵的溫度變幅"
+ },
+ "LockingMode": {
+ "text2": "按鍵鎖定",
+ "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>"
+ },
+ "MotionSensitivity": {
+ "text2": "動作敏感度",
+ "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+ },
"SleepTemperature": {
"text2": "待機溫度",
"desc": "於待機模式時的烙鐵頭溫度"
@@ -87,102 +123,74 @@ "text2": "自動關機",
"desc": "自動關機前的閒置等候時間 <m=分鐘>"
},
- "MotionSensitivity": {
- "text2": "動作敏感度",
- "desc": "0=停用 | 1=最低敏感度 | ... | 9=最高敏感度"
+ "HallEffSensitivity": {
+ "text2": "磁場敏感度",
+ "desc": "磁場感應器用作啟動待機模式的敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
},
"TemperatureUnit": {
"text2": "溫標",
"desc": "C=攝氏 | F=華氏"
},
- "AdvancedIdle": {
- "text2": "詳細閒置畫面",
- "desc": "於閒置畫面以英文小字型顯示詳細資料"
- },
"DisplayRotation": {
"text2": "畫面方向",
"desc": "右=使用右手 | 左=使用左手 | 自=自動"
},
- "BoostTemperature": {
- "text2": "增熱溫度",
- "desc": "於增熱模式時使用的溫度"
- },
- "AutoStart": {
- "text2": "自動啟用",
- "desc": "開機時自動啟用 <無=停用 | 焊=焊接模式 | 待=待機模式 | 室=室溫待機>"
- },
"CooldownBlink": {
"text2": "降溫時閃爍",
"desc": "停止加熱之後，當烙鐵頭仍處於高溫時閃爍畫面"
},
- "CalibrateCJC": {
- "text2": "Calibrate CJC",
- "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
+ "ScrollingSpeed": {
+ "text2": "捲動速度",
+ "desc": "解說文字的捲動速度"
},
- "SettingsReset": {
- "text2": "全部重設？",
- "desc": "將所有設定重設到預設值"
+ "ReverseButtonTempChange": {
+ "text2": "調換加減鍵",
+ "desc": "調校溫度時調換加減鍵的方向"
},
- "VoltageCalibration": {
- "text2": "輸入電壓校正？",
- "desc": "開始校正VIN輸入電壓 <長按以退出>"
+ "AnimSpeed": {
+ "text2": "動畫速度",
+ "desc": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
},
- "AdvancedSoldering": {
- "text2": "詳細焊接畫面",
- "desc": "於焊接模式畫面以英文小字型顯示詳細資料"
+ "AnimLoop": {
+ "text2": "動畫循環",
+ "desc": "循環顯示功能表圖示動畫"
},
- "ScrollingSpeed": {
- "text2": "捲動速度",
- "desc": "解說文字的捲動速度"
+ "Brightness": {
+ "text2": "螢幕亮度",
+ "desc": "設定OLED螢幕的亮度"
},
- "QCMaxVoltage": {
- "text2": "QC電壓",
- "desc": "使用QC電源時請求的最高目標電壓"
+ "ColourInversion": {
+ "text2": "螢幕反轉色",
+ "desc": "反轉OLED螢幕的黑白色彩"
},
- "PDNegTimeout": {
- "text2": "PD逾時",
- "desc": "設定USB PD協定交涉的逾時時限；為兼容某些QC電源而設 <x100ms（亳秒）>"
+ "LOGOTime": {
+ "text2": "Boot logo duration",
+ "desc": "Set boot logo duration (s=seconds)"
+ },
+ "AdvancedIdle": {
+ "text2": "詳細閒置畫面",
+ "desc": "於閒置畫面以英文小字型顯示詳細資料"
+ },
+ "AdvancedSoldering": {
+ "text2": "詳細焊接畫面",
+ "desc": "於焊接模式畫面以英文小字型顯示詳細資料"
},
"PowerLimit": {
"text2": "功率限制",
"desc": "限制烙鐵可用的最大功率 <W=watt（瓦特）>"
},
- "ReverseButtonTempChange": {
- "text2": "調換加減鍵",
- "desc": "調校溫度時調換加減鍵的方向"
- },
- "TempChangeShortStep": {
- "text2": "溫度調整 短",
- "desc": "調校溫度時短按一下的溫度變幅"
+ "CalibrateCJC": {
+ "text2": "Calibrate CJC",
+ "desc": "Calibrate tip Cold Junction Compensation at the next boot (not required if Delta T is < 5 C)"
},
- "TempChangeLongStep": {
- "text2": "溫度調整 長",
- "desc": "調校溫度時長按按鍵的溫度變幅"
+ "VoltageCalibration": {
+ "text2": "輸入電壓校正？",
+ "desc": "開始校正VIN輸入電壓 <長按以退出>"
},
"PowerPulsePower": {
"text2": "電源脈衝",
"desc": "為保持電源喚醒而通電所用的功率 <watt（瓦特）>"
},
- "HallEffSensitivity": {
- "text2": "磁場敏感度",
- "desc": "磁場感應器用作啟動待機模式的敏感度 <0=停用 | 1=最低敏感度 | ... | 9=最高敏感度>"
- },
- "LockingMode": {
- "text2": "按鍵鎖定",
- "desc": "於焊接模式時，同時長按兩個按鍵啟用按鍵鎖定 <無=停用 | 增=只容許增熱模式 | 全=鎖定全部>"
- },
- "MinVolCell": {
- "text2": "最低電壓",
- "desc": "每顆電池的最低可用電壓 <伏特> <3S: 3.0V - 3.7V, 4/5/6S: 2.4V - 3.7V>"
- },
- "AnimLoop": {
- "text2": "動畫循環",
- "desc": "循環顯示功能表圖示動畫"
- },
- "AnimSpeed": {
- "text2": "動畫速度",
- "desc": "功能表圖示動畫的速度 <關=不顯示動畫 | 慢=慢速 | 中=中速 | 快=快速>"
- },
"PowerPulseWait": {
"text2": "電源脈衝間隔",
"desc": "為保持電源喚醒，每次通電之間的間隔時間 <x2.5s（秒）>"
@@ -191,21 +199,13 @@ "text2": "電源脈衝時長",
"desc": "為保持電源喚醒，每次通電脈衝的時間長度 <x250ms（亳秒）>"
},
+ "SettingsReset": {
+ "text2": "全部重設？",
+ "desc": "將所有設定重設到預設值"
+ },
"LanguageSwitch": {
"text2": "語言：正體中文",
"desc": ""
- },
- "Brightness": {
- "text2": "螢幕亮度",
- "desc": "設定OLED螢幕的亮度"
- },
- "ColourInversion": {
- "text2": "螢幕反轉色",
- "desc": "反轉OLED螢幕的黑白色彩"
- },
- "LOGOTime": {
- "text2": "Boot logo duration",
- "desc": "Set boot logo duration (s=seconds)"
}
}
}
|