diff options
| -rw-r--r-- | workspace/TS100/inc/hardware.h | 2 | ||||
| -rw-r--r-- | workspace/TS100/inc/power.hpp | 18 | ||||
| -rw-r--r-- | workspace/TS100/src/Setup.c | 41 | ||||
| -rw-r--r-- | workspace/TS100/src/main.cpp | 73 | ||||
| -rw-r--r-- | workspace/TS100/src/power.cpp | 24 | ||||
| -rw-r--r-- | workspace/TS100A/.cproject | 356 | ||||
| -rw-r--r-- | workspace/TS100A/.gitignore | 2 | ||||
| -rw-r--r-- | workspace/TS100A/.settings/language.settings.xml | 14 | ||||
| -rw-r--r-- | workspace/TS100A/.settings/org.eclipse.cdt.managedbuilder.core.prefs | 10 |
9 files changed, 192 insertions, 348 deletions
diff --git a/workspace/TS100/inc/hardware.h b/workspace/TS100/inc/hardware.h index 561f1229..0717fde3 100644 --- a/workspace/TS100/inc/hardware.h +++ b/workspace/TS100/inc/hardware.h @@ -16,7 +16,7 @@ extern "C" { enum Orientation { ORIENTATION_LEFT_HAND = 0, ORIENTATION_RIGHT_HAND = 1, ORIENTATION_FLAT = 3 }; -#define PID_TIM_HZ (16) +#define PID_TIM_HZ (8) #if defined(MODEL_TS100) + defined(MODEL_TS80) > 1 #error "Multiple models defined!" #elif defined(MODEL_TS100) + defined(MODEL_TS80) == 0 diff --git a/workspace/TS100/inc/power.hpp b/workspace/TS100/inc/power.hpp index 87df47f2..1850cd14 100644 --- a/workspace/TS100/inc/power.hpp +++ b/workspace/TS100/inc/power.hpp @@ -11,7 +11,23 @@ #ifndef POWER_HPP_ #define POWER_HPP_ -const uint8_t oscillationPeriod = 4 * PID_TIM_HZ; // I term look back value +// thermal mass = 1690 milliJ/*C for my tip. +// -> Wattsx10*Seconds to raise Temp from room temp to +100*C, divided by 100*C. +// we divide mass by 20 to let the I term dominate near the set point. +// This is necessary because of the temp noise and thermal lag in the system. +// Once we have feed-forward temp estimation we should be able to better tune this. + +#ifdef MODEL_TS100 +const uint16_t tipMass = 450; // divide here so division is compile-time. +const uint8_t tipResistance = 85; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80 + +#endif +#ifdef MODEL_TS80 +const uint16_t tipMass = 450; +const uint8_t tipResistance = 45; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80 + +#endif +const uint8_t oscillationPeriod = 6 * PID_TIM_HZ; // I term look back value extern history<uint32_t, oscillationPeriod> milliWattHistory; int32_t tempToMilliWatts(int32_t rawTemp, uint8_t rawC); diff --git a/workspace/TS100/src/Setup.c b/workspace/TS100/src/Setup.c index 50f742a3..12858395 100644 --- a/workspace/TS100/src/Setup.c +++ b/workspace/TS100/src/Setup.c @@ -32,13 +32,13 @@ static void MX_ADC2_Init(void); void Setup_HAL() { SystemClock_Config(); - #ifndef LOCAL_BUILD -__HAL_AFIO_REMAP_SWJ_DISABLE(); - #else -__HAL_AFIO_REMAP_SWJ_NOJTAG(); - #endif - - +#ifndef LOCAL_BUILD + __HAL_AFIO_REMAP_SWJ_DISABLE() + ; +#else + __HAL_AFIO_REMAP_SWJ_NOJTAG(); +#endif + MX_GPIO_Init(); MX_DMA_Init(); MX_I2C1_Init(); @@ -262,9 +262,9 @@ static void MX_TIM3_Init(void) { htim3.Instance = TIM3; htim3.Init.Prescaler = 8; htim3.Init.CounterMode = TIM_COUNTERMODE_UP; - htim3.Init.Period = 400; // 5 Khz PWM freq + htim3.Init.Period = 100; // 5 Khz PWM freq htim3.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; // 4mhz before div - htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE;//Preload the ARR register (though we dont use this) + htim3.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE; //Preload the ARR register (though we dont use this) HAL_TIM_Base_Init(&htim3); sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; @@ -279,7 +279,7 @@ static void MX_TIM3_Init(void) { HAL_TIMEx_MasterConfigSynchronization(&htim3, &sMasterConfig); sConfigOC.OCMode = TIM_OCMODE_PWM1; - sConfigOC.Pulse = 80;//80% duty cycle, that is AC coupled through the cap + sConfigOC.Pulse = 80; //80% duty cycle, that is AC coupled through the cap sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; sConfigOC.OCFastMode = TIM_OCFAST_ENABLE; HAL_TIM_PWM_ConfigChannel(&htim3, &sConfigOC, PWM_Out_CHANNEL); @@ -291,11 +291,12 @@ static void MX_TIM3_Init(void) { */ GPIO_InitStruct.Pin = PWM_Out_Pin; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;//We would like sharp rising edges + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; //We would like sharp rising edges HAL_GPIO_Init(PWM_Out_GPIO_Port, &GPIO_InitStruct); #ifdef MODEL_TS100 // Remap TIM3_CH1 to be on PB4 - __HAL_AFIO_REMAP_TIM3_PARTIAL(); + __HAL_AFIO_REMAP_TIM3_PARTIAL() + ; #else // No re-map required #endif @@ -314,17 +315,15 @@ static void MX_TIM2_Init(void) { // Timer 2 is fairly slow as its being used to run the PWM and trigger the ADC // in the PWM off time. htim2.Instance = TIM2; - htim2.Init.Prescaler = 2000; //1mhz tick rate/800 = 1.25 KHz tick rate + htim2.Init.Prescaler = 4000; //1mhz tick rate/800 = 1.25 KHz tick rate // pwm out is 10k from tim3, we want to run our PWM at around 10hz or slower on the output stage - // The input is 1mhz after the div/4, so divide this by 785 to give around 4Hz output change rate - //Trade off is the slower the PWM output the slower we can respond and we gain temperature accuracy in settling time, - //But it increases the time delay between the heat cycle and the measurement and calculate cycle + // These values give a rate of around 8Hz htim2.Init.CounterMode = TIM_COUNTERMODE_UP; - htim2.Init.Period = 255 + 20; + htim2.Init.Period = 255 + 17; htim2.Init.ClockDivision = TIM_CLOCKDIVISION_DIV4; // 4mhz before divide - htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE; - htim2.Init.RepetitionCounter=0; + htim2.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE; + htim2.Init.RepetitionCounter = 0; HAL_TIM_Base_Init(&htim2); sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL; @@ -338,7 +337,7 @@ static void MX_TIM2_Init(void) { HAL_TIMEx_MasterConfigSynchronization(&htim2, &sMasterConfig); sConfigOC.OCMode = TIM_OCMODE_PWM1; - sConfigOC.Pulse = 255 + 10; + sConfigOC.Pulse = 255 + 13;//13 -> Delay of 5ms //255 is the largest time period of the drive signal, and then offset ADC sample to be a bit delayed after this /* * It takes 4 milliseconds for output to be stable after PWM turns off. @@ -348,7 +347,7 @@ static void MX_TIM2_Init(void) { sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH; sConfigOC.OCFastMode = TIM_OCFAST_ENABLE; HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_1); - sConfigOC.Pulse = 0;//default to entirely off + sConfigOC.Pulse = 0; //default to entirely off HAL_TIM_OC_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4); HAL_TIM_Base_Start_IT(&htim2); diff --git a/workspace/TS100/src/main.cpp b/workspace/TS100/src/main.cpp index cc970019..54c030aa 100644 --- a/workspace/TS100/src/main.cpp +++ b/workspace/TS100/src/main.cpp @@ -271,36 +271,36 @@ static void gui_drawBatteryIcon() { // we need to calculate which of the 10 levels they are on uint8_t cellCount = systemSettings.cutoutSetting + 2; uint32_t cellV = getInputVoltageX10(systemSettings.voltageDiv, 0) - / cellCount; + / cellCount; // Should give us approx cell voltage X10 // Range is 42 -> 33 = 9 steps therefore we will use battery 1-10 if (cellV < 33) - cellV = 33; - cellV -= 33; // Should leave us a number of 0-9 + cellV = 33; + cellV -= 33;// Should leave us a number of 0-9 if (cellV > 9) - cellV = 9; + cellV = 9; OLED::drawBattery(cellV + 1); } else - OLED::drawSymbol(15); // Draw the DC Logo + OLED::drawSymbol(15); // Draw the DC Logo #else - // On TS80 we replace this symbol with the voltage we are operating on - // If <9V then show single digit, if not show duals - uint8_t V = getInputVoltageX10(systemSettings.voltageDiv, 0); - if (V % 10 >= 5) - V = V / 10 + 1;// round up - else - V = V / 10; - if (V >= 10) { - int16_t xPos = OLED::getCursorX(); - OLED::setFont(1); - OLED::printNumber(1, 1); - OLED::setCursor(xPos, 8); - OLED::printNumber(V % 10, 1); - OLED::setFont(0); - OLED::setCursor(xPos + 12, 0); // need to reset this as if we drew a wide char - } else { - OLED::printNumber(V, 1); - } + // On TS80 we replace this symbol with the voltage we are operating on + // If <9V then show single digit, if not show duals + uint8_t V = getInputVoltageX10(systemSettings.voltageDiv, 0); + if (V % 10 >= 5) + V = V / 10 + 1; // round up + else + V = V / 10; + if (V >= 10) { + int16_t xPos = OLED::getCursorX(); + OLED::setFont(1); + OLED::printNumber(1, 1); + OLED::setCursor(xPos, 8); + OLED::printNumber(V % 10, 1); + OLED::setFont(0); + OLED::setCursor(xPos + 12, 0); // need to reset this as if we drew a wide char + } else { + OLED::printNumber(V, 1); + } #endif } static void gui_solderingTempAdjust() { @@ -372,7 +372,7 @@ static void gui_solderingTempAdjust() { #ifdef MODEL_TS80 if (!OLED::getRotation()) #else - if (OLED::getRotation()) + if (OLED::getRotation()) #endif OLED::print(SymbolMinus); else @@ -388,7 +388,7 @@ static void gui_solderingTempAdjust() { #ifdef MODEL_TS80 if (!OLED::getRotation()) #else - if (OLED::getRotation()) + if (OLED::getRotation()) #endif OLED::print(SymbolPlus); else @@ -415,7 +415,7 @@ static int gui_SolderingSleepingMode() { || (xTaskGetTickCount() - lastButtonTime < 100)) return 0; // user moved or pressed a button, go back to soldering #ifdef MODEL_TS100 - if (checkVoltageForExit()) + if (checkVoltageForExit()) return 1; // return non-zero on error #endif if (systemSettings.temperatureInF) { @@ -682,9 +682,9 @@ void showVersion(void) { OLED::setCursor(0, 0); // Position the cursor at the 0,0 (top left) OLED::setFont(1); // small font #ifdef MODEL_TS100 - OLED::print(SymbolVersionNumber); // Print version number -#else OLED::print(SymbolVersionNumber); // Print version number +#else + OLED::print(SymbolVersionNumber); // Print version number #endif OLED::setCursor(0, 8); // second line OLED::print(DebugMenu[screen]); @@ -871,7 +871,7 @@ void startGUITask(void const *argument __unused) { #ifdef MODEL_TS80 if (!OLED::getRotation()) { #else - if (OLED::getRotation()) { + if (OLED::getRotation()) { #endif OLED::drawArea(12, 0, 84, 16, idleScreenBG); OLED::setCursor(0, 0); @@ -892,7 +892,7 @@ void startGUITask(void const *argument __unused) { #ifdef MODEL_TS80 if (!OLED::getRotation()) { #else - if (OLED::getRotation()) { + if (OLED::getRotation()) { #endif // in right handed mode we want to draw over the first part OLED::fillArea(55, 0, 41, 16, 0); // clear the area for the temp @@ -921,15 +921,16 @@ void startPIDTask(void const *argument __unused) { */ setTipMilliWatts(0); // disable the output driver if the output is set to be off #ifdef MODEL_TS80 - idealQCVoltage = calculateMaxVoltage(systemSettings.cutoutSetting); + idealQCVoltage = calculateMaxVoltage(systemSettings.cutoutSetting); #endif uint8_t rawC = ctoTipMeasurement(101) - ctoTipMeasurement(100); // 1*C change in raw. #ifdef MODEL_TS80 - //Set power management code to the tip resistance in ohms * 10 - TickType_t lastPowerPulse = 0; + //Set power management code to the tip resistance in ohms * 10 + TickType_t lastPowerPulse = 0; #endif // Tip temp reading filter + // Tip temp is read at a rate of PID_TIM_Hz history<int32_t, PID_TIM_HZ / 4> tempError = { { 0 }, 0, 0 }; currentlyActiveTemperatureTarget = 0; // Force start with no output (off). If in sleep / soldering this will // be over-ridden rapidly @@ -991,7 +992,7 @@ void startPIDTask(void const *argument __unused) { // This is purely guesswork :'( as everyone implements stuff differently if (xTaskGetTickCount() - lastPowerPulse < 10) { // for the first 100mS turn on for a bit - setTipMilliWatts(2000);// typically its around 5W to hold the current temp, so this wont raise temp much + setTipMilliWatts(2000); // typically its around 5W to hold the current temp, so this wont raise temp much } else { setTipMilliWatts(0); } @@ -1021,9 +1022,9 @@ void startMOVTask(void const *argument __unused) { #ifdef MODEL_TS80 startQC(systemSettings.voltageDiv); while (pidTaskNotification == 0) - osDelay(30); // To ensure we return after idealQCVoltage/tip resistance + osDelay(30); // To ensure we return after idealQCVoltage/tip resistance - seekQC(idealQCVoltage, systemSettings.voltageDiv);// this will move the QC output to the preferred voltage to start with + seekQC(idealQCVoltage, systemSettings.voltageDiv); // this will move the QC output to the preferred voltage to start with #else osDelay(250); // wait for accelerometer to stabilize diff --git a/workspace/TS100/src/power.cpp b/workspace/TS100/src/power.cpp index 1182bf45..967a72e9 100644 --- a/workspace/TS100/src/power.cpp +++ b/workspace/TS100/src/power.cpp @@ -10,41 +10,25 @@ #include <hardware.h> const uint16_t powerPWM = 255; -const uint16_t totalPWM = 255 + 30; //htim2.Init.Period, the full PWM cycle +const uint16_t totalPWM = 255 + 17; //htim2.Init.Period, the full PWM cycle -// thermal mass = 1690 milliJ/*C for my tip. -// -> Wattsx10*Seconds to raise Temp from room temp to +100*C, divided by 100*C. -// we divide mass by 20 to let the I term dominate near the set point. -// This is necessary because of the temp noise and thermal lag in the system. -// Once we have feed-forward temp estimation we should be able to better tune this. - -#ifdef MODEL_TS100 -const uint16_t tipMass = 2020 ; // divide here so division is compile-time. -const uint8_t tipResistance = 85;//x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80 - -#endif -#ifdef MODEL_TS80 -const uint16_t tipMass = 1000/4; -const uint8_t tipResistance = 46; //x10 ohms, 8.5 typical for ts100, 4.5 typical for ts80 - -#endif history<uint32_t, oscillationPeriod> milliWattHistory = { { 0 }, 0, 0 }; int32_t tempToMilliWatts(int32_t rawTemp, uint8_t rawC) { // mass is in milliJ/*C, rawC is raw per degree C // returns milliWatts needed to raise/lower a mass by rawTemp // degrees in one cycle. - int32_t milliJoules = tipMass * (rawTemp / rawC); + int32_t milliJoules = tipMass*10 * (rawTemp / rawC); return milliJoules; } void setTipMilliWatts(int32_t mw) { //Enforce Max Watts Limiter # TODO - int32_t output = milliWattsToPWM(mw, systemSettings.voltageDiv / 10, 1); + int32_t output = milliWattsToPWM(mw, systemSettings.voltageDiv , 1); setTipPWM(output); uint32_t actualMilliWatts = PWMToMilliWatts(output, - systemSettings.voltageDiv / 10, 0); + systemSettings.voltageDiv , 0); milliWattHistory.update(actualMilliWatts); } diff --git a/workspace/TS100A/.cproject b/workspace/TS100A/.cproject index 75bd2169..2fd646fc 100644 --- a/workspace/TS100A/.cproject +++ b/workspace/TS100A/.cproject @@ -2,7 +2,7 @@ <?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> <storageModule moduleId="org.eclipse.cdt.core.settings"> <cconfiguration id="com.atollic.truestudio.configuration.release.200032419"> - <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.configuration.release.200032419" moduleId="org.eclipse.cdt.core.settings" name="Release"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.configuration.release.200032419" moduleId="org.eclipse.cdt.core.settings" name="ReleaseTS100"> <externalSettings/> <extensions> <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> @@ -12,7 +12,7 @@ </extensions> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" errorParsers="org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.configuration.release.200032419" name="Release" parent="com.atollic.truestudio.configuration.release" postannouncebuildStep="" postbuildStep="" preannouncebuildStep="" prebuildStep=""> + <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" errorParsers="org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.configuration.release.200032419" name="ReleaseTS100" parent="com.atollic.truestudio.configuration.release" postannouncebuildStep="" postbuildStep="" preannouncebuildStep="" prebuildStep=""> <folderInfo id="com.atollic.truestudio.configuration.release.200032419." name="/" resourcePath=""> <toolChain errorParsers="" id="com.atollic.truestudio.exe.release.toolchain.1340188969" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.release.toolchain"> <option id="com.atollic.truestudio.general.runtimelib.191191414" name="Runtime Library" superClass="com.atollic.truestudio.general.runtimelib" useByScannerDiscovery="false" value="com.atollic.truestudio.ld.general.cclib.CCSmallCSmall" valueType="enumerated"/> @@ -160,8 +160,8 @@ </storageModule> <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> </cconfiguration> - <cconfiguration id="com.atollic.truestudio.configuration.release.200032419.2005314669"> - <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.configuration.release.200032419.2005314669" moduleId="org.eclipse.cdt.core.settings" name="TS100"> + <cconfiguration id="com.atollic.truestudio.configuration.release.200032419.567701681"> + <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.configuration.release.200032419.567701681" moduleId="org.eclipse.cdt.core.settings" name="ReleaseTS80"> <externalSettings/> <extensions> <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> @@ -171,21 +171,21 @@ </extensions> </storageModule> <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" errorParsers="org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.configuration.release.200032419.2005314669" name="TS100" parent="com.atollic.truestudio.configuration.release" postannouncebuildStep="" postbuildStep="" preannouncebuildStep="" prebuildStep=""> - <folderInfo id="com.atollic.truestudio.configuration.release.200032419.2005314669." name="/" resourcePath=""> - <toolChain errorParsers="" id="com.atollic.truestudio.exe.release.toolchain.790179169" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.release.toolchain"> - <option id="com.atollic.truestudio.general.runtimelib.832126625" name="Runtime Library" superClass="com.atollic.truestudio.general.runtimelib" useByScannerDiscovery="false" value="com.atollic.truestudio.ld.general.cclib.CCStandardCStandard" valueType="enumerated"/> - <option id="com.atollic.truestudio.toolchain_options.mcu.967724944" name="Microcontroller" superClass="com.atollic.truestudio.toolchain_options.mcu" useByScannerDiscovery="false" value="STM32F103T8" valueType="string"/> - <option id="com.atollic.truestudio.toolchain_options.vendor.1608876733" name="Vendor name" superClass="com.atollic.truestudio.toolchain_options.vendor" useByScannerDiscovery="false" value="STMicroelectronics" valueType="string"/> - <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.atollic.truestudio.exe.release.toolchain.platform.2056621458" isAbstract="false" name="release platform" superClass="com.atollic.truestudio.exe.release.toolchain.platform"/> - <builder buildPath="${workspace_loc:/TS100A}/Release" customBuilderProperties="toolChainpathString=C:\\Program Files (x86)\\Atollic\\TrueSTUDIO for STM32 9.1.0\\ARMTools\\bin|toolChainpathType=1|com.atollic.truestudio.common_options.target.vendor=STMicroelectronics|com.atollic.truestudio.common_options.target.mcu=STM32F103T8|" errorParsers="" id="com.atollic.truestudio.mbs.builder1.1970479062" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"/> - <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.atollic.truestudio.exe.release.toolchain.as.1116045031" name="Assembler" superClass="com.atollic.truestudio.exe.release.toolchain.as"> - <option id="com.atollic.truestudio.common_options.target.endianess.532801301" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.1606774976" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.833489345" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.313760852" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.423848100" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.as.symbols.defined.706464592" name="Defined symbols" superClass="com.atollic.truestudio.as.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> + <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" errorParsers="org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.configuration.release.200032419.567701681" name="ReleaseTS80" parent="com.atollic.truestudio.configuration.release" postannouncebuildStep="" postbuildStep="" preannouncebuildStep="" prebuildStep=""> + <folderInfo id="com.atollic.truestudio.configuration.release.200032419.567701681." name="/" resourcePath=""> + <toolChain errorParsers="" id="com.atollic.truestudio.exe.release.toolchain.1370081329" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.release.toolchain"> + <option id="com.atollic.truestudio.general.runtimelib.1144750697" name="Runtime Library" superClass="com.atollic.truestudio.general.runtimelib" useByScannerDiscovery="false" value="com.atollic.truestudio.ld.general.cclib.CCSmallCSmall" valueType="enumerated"/> + <option id="com.atollic.truestudio.toolchain_options.mcu.1299329923" name="Microcontroller" superClass="com.atollic.truestudio.toolchain_options.mcu" useByScannerDiscovery="false" value="STM32F103T8" valueType="string"/> + <option id="com.atollic.truestudio.toolchain_options.vendor.360998338" name="Vendor name" superClass="com.atollic.truestudio.toolchain_options.vendor" useByScannerDiscovery="false" value="STMicroelectronics" valueType="string"/> + <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.atollic.truestudio.exe.release.toolchain.platform.676659043" isAbstract="false" name="release platform" superClass="com.atollic.truestudio.exe.release.toolchain.platform"/> + <builder autoBuildTarget="" buildPath="${workspace_loc:/TS100A}/Release" cleanBuildTarget="" customBuilderProperties="toolChainpathString=/opt/Atollic_TrueSTUDIO_for_STM32_x86_64_9.3.0/ARMTools/bin|toolChainpathType=1|com.atollic.truestudio.common_options.target.vendor=STMicroelectronics|com.atollic.truestudio.common_options.target.mcu=STM32F103T8|" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" errorParsers="" id="com.atollic.truestudio.mbs.builder1.643804487" incrementalBuildTarget="" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="com.atollic.truestudio.mbs.builder1"/> + <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.atollic.truestudio.exe.release.toolchain.as.1501061643" name="Assembler" superClass="com.atollic.truestudio.exe.release.toolchain.as"> + <option id="com.atollic.truestudio.common_options.target.endianess.2023984459" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1319355665" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1692589717" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpucore.326700402" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpu.335481321" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.as.symbols.defined.1345132644" name="Defined symbols" superClass="com.atollic.truestudio.as.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> <listOptionValue builtIn="false" value="STM32F103T8Ux"/> <listOptionValue builtIn="false" value="STM32F1"/> <listOptionValue builtIn="false" value="STM32"/> @@ -193,7 +193,7 @@ <listOptionValue builtIn="false" value="STM32F103xB"/> <listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/> </option> - <option id="com.atollic.truestudio.as.general.incpath.1165258034" name="Include path" superClass="com.atollic.truestudio.as.general.incpath" useByScannerDiscovery="false" valueType="includePath"> + <option id="com.atollic.truestudio.as.general.incpath.1237254978" name="Include path" superClass="com.atollic.truestudio.as.general.incpath" useByScannerDiscovery="false" valueType="includePath"> <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS""/> <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM3""/> <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\include""/> @@ -204,269 +204,111 @@ <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\core""/> <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\device""/> </option> - <option id="com.atollic.truestudio.common_options.target.interwork.2098532585" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.as.input.199834741" name="Input" superClass="com.atollic.truestudio.as.input"/> + <option id="com.atollic.truestudio.common_options.target.interwork.1920257013" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.exe.release.toolchain.as.debug.flags.2105311850" name="Debug Level" superClass="com.atollic.truestudio.exe.release.toolchain.as.debug.flags" useByScannerDiscovery="false" value="com.atollic.truestudio.as.debug.flags.3" valueType="enumerated"/> + <inputType id="com.atollic.truestudio.as.input.685367003" name="Input" superClass="com.atollic.truestudio.as.input"/> </tool> - <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${INPUTS} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.exe.release.toolchain.gcc.1773256937" name="C Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gcc"> - <option id="com.atollic.truestudio.gcc.symbols.defined.1274040270" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> + <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${INPUTS} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.exe.release.toolchain.gcc.432309007" name="C Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gcc"> + <option id="com.atollic.truestudio.gcc.symbols.defined.815038380" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> <listOptionValue builtIn="false" value="STM32F103T8Ux"/> - <listOptionValue builtIn="false" value="MODEL_TS100"/> - <listOptionValue builtIn="false" value="STM32F1"/> - <listOptionValue builtIn="false" value="STM32"/> - <listOptionValue builtIn="false" value="USE_HAL_DRIVER"/> - <listOptionValue builtIn="false" value="STM32F103xB"/> - <listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/> - </option> - <option id="com.atollic.truestudio.gcc.directories.select.1921628340" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" useByScannerDiscovery="false" valueType="includePath"> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM3""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\include""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc\Legacy""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\core""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\device""/> - </option> - <option id="com.atollic.truestudio.common_options.target.endianess.1246726436" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.120931966" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.1609836877" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.2048530479" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.179253875" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.487627031" name="Prepare dead code removal " superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gcc.optimization.prep_data.732099984" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.exe.release.toolchain.gcc.debug.info.1305877572" name="Debug Level" superClass="com.atollic.truestudio.exe.release.toolchain.gcc.debug.info" useByScannerDiscovery="false" value="com.atollic.truestudio.gcc.debug.info.3" valueType="enumerated"/> - <option id="com.atollic.truestudio.gcc.warnings.extra.918502286" name="Enable extra warning flags" superClass="com.atollic.truestudio.gcc.warnings.extra" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.common_options.target.interwork.1430376754" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.gcc.input.1218983433" superClass="com.atollic.truestudio.gcc.input"/> - </tool> - <tool id="com.atollic.truestudio.exe.release.toolchain.ld.2062140266" name="C Linker" superClass="com.atollic.truestudio.exe.release.toolchain.ld"> - <option id="com.atollic.truestudio.common_options.target.endianess.202331070" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.1584957200" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.88629340" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.935232041" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.308894529" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu"/> - <option id="com.atollic.truestudio.ld.general.scriptfile.30838865" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="../stm32_flash.ld" valueType="string"/> - <option id="com.atollic.truestudio.ld.optimization.do_garbage.1519904337" name="Dead code removal " superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.common_options.target.interwork.1876933394" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork"/> - <option id="com.atollic.truestudio.ld.misc.genmapfile.1111696661" name="Create map file" superClass="com.atollic.truestudio.ld.misc.genmapfile"/> - </tool> - <tool command="arm-atollic-eabi-g++ -c" commandLinePattern="${COMMAND} ${INPUTS} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.exe.release.toolchain.gpp.229799678" name="C++ Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gpp"> - <option id="com.atollic.truestudio.gpp.symbols.defined.843853133" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> - <listOptionValue builtIn="false" value="STM32F103T8Ux"/> - <listOptionValue builtIn="false" value="MODEL_TS100"/> - <listOptionValue builtIn="false" value="STM32F1"/> - <listOptionValue builtIn="false" value="STM32"/> - <listOptionValue builtIn="false" value="USE_HAL_DRIVER"/> - <listOptionValue builtIn="false" value="STM32F103xB"/> - <listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/> - </option> - <option id="com.atollic.truestudio.gpp.directories.select.429075052" name="Include path" superClass="com.atollic.truestudio.gpp.directories.select" useByScannerDiscovery="false" valueType="includePath"> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM3""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\include""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc\Legacy""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\core""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\device""/> - </option> - <option id="com.atollic.truestudio.common_options.target.endianess.2125214141" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.1535244038" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.1844576388" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.1536189706" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.1070745777" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.967740502" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.optimization.prep_data.1758485333" name="Prepare dead data removal" superClass="com.atollic.truestudio.gpp.optimization.prep_data" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.1034234085" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.489770809" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.exe.release.toolchain.gpp.debug.info.657554017" name="Debug Level" superClass="com.atollic.truestudio.exe.release.toolchain.gpp.debug.info" useByScannerDiscovery="false" value="com.atollic.truestudio.gpp.debug.info.3" valueType="enumerated"/> - <option id="com.atollic.truestudio.gpp.warnings.extra.1622434843" name="Enable extra warning flags" superClass="com.atollic.truestudio.gpp.warnings.extra" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.cppstandard.117433311" name="C++ standard" superClass="com.atollic.truestudio.gpp.cppstandard" useByScannerDiscovery="false" value="com.atollic.truestudio.gpp.cppstandard.gnupp14" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.interwork.2122034593" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.gpp.input.1134011493" superClass="com.atollic.truestudio.gpp.input"/> - </tool> - <tool command="arm-atollic-eabi-g++" commandLinePattern="${COMMAND} ${OUTPUT_FLAG} ${OUTPUT} ${INPUTS} ${FLAGS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.atollic.truestudio.exe.release.toolchain.ldcc.1509174742" name="C++ Linker" superClass="com.atollic.truestudio.exe.release.toolchain.ldcc"> - <option id="com.atollic.truestudio.common_options.target.endianess.1963695768" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.1110004424" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.1898845686" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.1332810361" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.1726742655" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.195654453" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.ldcc.general.scriptfile.1795298853" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" useByScannerDiscovery="false" value="${workspace_loc:/${ProjName}}/../TS100/LinkerScript.ld" valueType="string"/> - <option id="com.atollic.truestudio.ldcc.misc.linkerflags.322875797" name="Other options" superClass="com.atollic.truestudio.ldcc.misc.linkerflags" useByScannerDiscovery="false" value="-Wl,-cref,-u,Reset_Handler,-lm -Os -flto -Wl,--undefined=vTaskSwitchContext" valueType="string"/> - <option id="com.atollic.truestudio.ldcc.optimization.malloc_page_size.109966334" name="Page size allocation for malloc() " superClass="com.atollic.truestudio.ldcc.optimization.malloc_page_size" useByScannerDiscovery="false" value="com.atollic.truestudio.ldcc.optimization.malloc_page_size.128" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.interwork.512584410" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.ldcc.misc.genmapfile.1748611146" name="Create map file" superClass="com.atollic.truestudio.ldcc.misc.genmapfile" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.ldcc.input.282752612" name="Input" superClass="com.atollic.truestudio.ldcc.input"> - <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> - <additionalInput kind="additionalinput" paths="$(LIBS)"/> - </inputType> - </tool> - <tool id="com.atollic.truestudio.ar.base.1243768714" name="Archiver" superClass="com.atollic.truestudio.ar.base"/> - <tool command="arm-atollic-reports.jar" commandLinePattern="${COMMAND} ${FLAGS} ${INPUTS}" errorParsers="" id="com.atollic.truestudio.exe.release.toolchain.secoutput.2132361708" name="Other" superClass="com.atollic.truestudio.exe.release.toolchain.secoutput"> - <option id="com.atollic.truestudio.secoutput.general.convert.1699078359" name="Convert build output" superClass="com.atollic.truestudio.secoutput.general.convert" useByScannerDiscovery="false" value="true" valueType="boolean"/> - </tool> - </toolChain> - </folderInfo> - <sourceEntries> - <entry flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/> - </sourceEntries> - </configuration> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> - </cconfiguration> - <cconfiguration id="com.atollic.truestudio.configuration.release.200032419.2005314669.1746279461"> - <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.atollic.truestudio.configuration.release.200032419.2005314669.1746279461" moduleId="org.eclipse.cdt.core.settings" name="TS100_LOCAL"> - <externalSettings/> - <extensions> - <extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/> - <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - </extensions> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <configuration artifactExtension="elf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" errorParsers="org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.configuration.release.200032419.2005314669.1746279461" name="TS100_LOCAL" parent="com.atollic.truestudio.configuration.release" postannouncebuildStep="" postbuildStep="" preannouncebuildStep="" prebuildStep=""> - <folderInfo id="com.atollic.truestudio.configuration.release.200032419.2005314669.1746279461." name="/" resourcePath=""> - <toolChain errorParsers="" id="com.atollic.truestudio.exe.release.toolchain.743607422" name="Atollic ARM Tools" superClass="com.atollic.truestudio.exe.release.toolchain"> - <option id="com.atollic.truestudio.general.runtimelib.649265794" name="Runtime Library" superClass="com.atollic.truestudio.general.runtimelib" useByScannerDiscovery="false" value="com.atollic.truestudio.ld.general.cclib.CCStandardCStandard" valueType="enumerated"/> - <option id="com.atollic.truestudio.toolchain_options.mcu.1178686191" name="Microcontroller" superClass="com.atollic.truestudio.toolchain_options.mcu" useByScannerDiscovery="false" value="STM32F103T8" valueType="string"/> - <option id="com.atollic.truestudio.toolchain_options.vendor.33572042" name="Vendor name" superClass="com.atollic.truestudio.toolchain_options.vendor" useByScannerDiscovery="false" value="STMicroelectronics" valueType="string"/> - <targetPlatform archList="all" binaryParser="org.eclipse.cdt.core.ELF" id="com.atollic.truestudio.exe.release.toolchain.platform.179000850" isAbstract="false" name="release platform" superClass="com.atollic.truestudio.exe.release.toolchain.platform"/> - <builder buildPath="${workspace_loc:/TS100A}/Release" customBuilderProperties="toolChainpathString=C:\\Program Files (x86)\\Atollic\\TrueSTUDIO for STM32 9.1.0\\ARMTools\\bin|toolChainpathType=1|com.atollic.truestudio.common_options.target.vendor=STMicroelectronics|com.atollic.truestudio.common_options.target.mcu=STM32F103T8|" errorParsers="" id="com.atollic.truestudio.mbs.builder1.1206056378" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="CDT Internal Builder" superClass="com.atollic.truestudio.mbs.builder1"/> - <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.atollic.truestudio.exe.release.toolchain.as.450255183" name="Assembler" superClass="com.atollic.truestudio.exe.release.toolchain.as"> - <option id="com.atollic.truestudio.common_options.target.endianess.1980015520" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.1917513940" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.656507492" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.1067556557" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.909713753" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.as.symbols.defined.1463342746" name="Defined symbols" superClass="com.atollic.truestudio.as.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> - <listOptionValue builtIn="false" value="STM32F103T8Ux"/> - <listOptionValue builtIn="false" value="LOCAL_BUILD"/> + <listOptionValue builtIn="false" value="MODEL_TS80"/> <listOptionValue builtIn="false" value="STM32F1"/> <listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="USE_HAL_DRIVER"/> <listOptionValue builtIn="false" value="STM32F103xB"/> <listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/> </option> - <option id="com.atollic.truestudio.as.general.incpath.873601990" name="Include path" superClass="com.atollic.truestudio.as.general.incpath" useByScannerDiscovery="false" valueType="includePath"> + <option id="com.atollic.truestudio.gcc.directories.select.784651652" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" useByScannerDiscovery="false" valueType="includePath"> <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM3""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\include""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc\Legacy""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\core""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\device""/> - </option> - <option id="com.atollic.truestudio.common_options.target.interwork.936472392" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.as.input.129375893" name="Input" superClass="com.atollic.truestudio.as.input"/> - </tool> - <tool command="arm-atollic-eabi-gcc -c" commandLinePattern="${COMMAND} ${INPUTS} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.exe.release.toolchain.gcc.1332975164" name="C Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gcc"> - <option id="com.atollic.truestudio.gcc.symbols.defined.1919402724" name="Defined symbols" superClass="com.atollic.truestudio.gcc.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> - <listOptionValue builtIn="false" value="STM32F103T8Ux"/> - <listOptionValue builtIn="false" value="LOCAL_BUILD"/> - <listOptionValue builtIn="false" value="MODEL_TS100"/> - <listOptionValue builtIn="false" value="STM32F1"/> - <listOptionValue builtIn="false" value="STM32"/> - <listOptionValue builtIn="false" value="USE_HAL_DRIVER"/> - <listOptionValue builtIn="false" value="STM32F103xB"/> - <listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/> - </option> - <option id="com.atollic.truestudio.gcc.directories.select.777721863" name="Include path" superClass="com.atollic.truestudio.gcc.directories.select" useByScannerDiscovery="false" valueType="includePath"> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM3""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\include""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc\Legacy""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\core""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\device""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/include""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/portable""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/HAL_Driver/Inc/Legacy""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/inc""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/HAL_Driver/Inc""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/CMSIS/core""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/CMSIS/device""/> </option> - <option id="com.atollic.truestudio.common_options.target.endianess.1398679252" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.216657505" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.517024600" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.1295693572" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.513113282" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.3269428" name="Prepare dead code removal " superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gcc.optimization.prep_data.1494329913" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.exe.release.toolchain.gcc.debug.info.774134544" name="Debug Level" superClass="com.atollic.truestudio.exe.release.toolchain.gcc.debug.info" useByScannerDiscovery="false" value="com.atollic.truestudio.gcc.debug.info.3" valueType="enumerated"/> - <option id="com.atollic.truestudio.gcc.warnings.extra.923955337" name="Enable extra warning flags" superClass="com.atollic.truestudio.gcc.warnings.extra" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.common_options.target.interwork.705166935" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.gcc.input.972201280" superClass="com.atollic.truestudio.gcc.input"/> + <option id="com.atollic.truestudio.common_options.target.endianess.581535424" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.929120351" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.388833854" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpucore.785429959" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpu.771481133" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_garbage.1230177354" name="Prepare dead code removal " superClass="com.atollic.truestudio.gcc.optimization.prep_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gcc.optimization.prep_data.900857724" name="Prepare dead data removal" superClass="com.atollic.truestudio.gcc.optimization.prep_data" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.exe.release.toolchain.gcc.debug.info.44800069" name="Debug Level" superClass="com.atollic.truestudio.exe.release.toolchain.gcc.debug.info" useByScannerDiscovery="false" value="com.atollic.truestudio.gcc.debug.info.3" valueType="enumerated"/> + <option id="com.atollic.truestudio.gcc.warnings.extra.682480079" name="Enable extra warning flags" superClass="com.atollic.truestudio.gcc.warnings.extra" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.common_options.target.interwork.1941407234" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> + <inputType id="com.atollic.truestudio.gcc.input.562764950" superClass="com.atollic.truestudio.gcc.input"/> </tool> - <tool id="com.atollic.truestudio.exe.release.toolchain.ld.1724584550" name="C Linker" superClass="com.atollic.truestudio.exe.release.toolchain.ld"> - <option id="com.atollic.truestudio.common_options.target.endianess.1048736100" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.1288284258" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.18065699" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.1881059567" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.1491233159" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu"/> - <option id="com.atollic.truestudio.ld.general.scriptfile.1002254715" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="../stm32_flash.ld" valueType="string"/> - <option id="com.atollic.truestudio.ld.optimization.do_garbage.240611247" name="Dead code removal " superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.common_options.target.interwork.450818258" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork"/> - <option id="com.atollic.truestudio.ld.misc.genmapfile.824075230" name="Create map file" superClass="com.atollic.truestudio.ld.misc.genmapfile"/> + <tool id="com.atollic.truestudio.exe.release.toolchain.ld.91790850" name="C Linker" superClass="com.atollic.truestudio.exe.release.toolchain.ld"> + <option id="com.atollic.truestudio.common_options.target.endianess.1380652799" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.884099538" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" value="STM32F103T8" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.588508551" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpucore.1611268083" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpu.1619066040" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu"/> + <option id="com.atollic.truestudio.ld.general.scriptfile.179084119" name="Linker script" superClass="com.atollic.truestudio.ld.general.scriptfile" value="../stm32_flash.ld" valueType="string"/> + <option id="com.atollic.truestudio.ld.optimization.do_garbage.1433560009" name="Dead code removal " superClass="com.atollic.truestudio.ld.optimization.do_garbage" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.common_options.target.interwork.46454421" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork"/> + <option id="com.atollic.truestudio.ld.misc.genmapfile.2012342834" name="Create map file" superClass="com.atollic.truestudio.ld.misc.genmapfile"/> </tool> - <tool command="arm-atollic-eabi-g++ -c" commandLinePattern="${COMMAND} ${INPUTS} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.exe.release.toolchain.gpp.1569179032" name="C++ Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gpp"> - <option id="com.atollic.truestudio.gpp.symbols.defined.1174699371" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> + <tool command="arm-atollic-eabi-g++ -c" commandLinePattern="${COMMAND} ${INPUTS} ${FLAGS} ${OUTPUT_FLAG} ${OUTPUT_PREFIX}${OUTPUT}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.atollic.truestudio.exe.release.toolchain.gpp.1503164054" name="C++ Compiler" superClass="com.atollic.truestudio.exe.release.toolchain.gpp"> + <option id="com.atollic.truestudio.gpp.symbols.defined.963192144" name="Defined symbols" superClass="com.atollic.truestudio.gpp.symbols.defined" useByScannerDiscovery="false" valueType="definedSymbols"> <listOptionValue builtIn="false" value="STM32F103T8Ux"/> - <listOptionValue builtIn="false" value="LOCAL_BUILD"/> - <listOptionValue builtIn="false" value="MODEL_TS100"/> + <listOptionValue builtIn="false" value="MODEL_TS80"/> <listOptionValue builtIn="false" value="STM32F1"/> <listOptionValue builtIn="false" value="STM32"/> <listOptionValue builtIn="false" value="USE_HAL_DRIVER"/> <listOptionValue builtIn="false" value="STM32F103xB"/> <listOptionValue builtIn="false" value="USE_RTOS_SYSTICK"/> </option> - <option id="com.atollic.truestudio.gpp.directories.select.1805913285" name="Include path" superClass="com.atollic.truestudio.gpp.directories.select" useByScannerDiscovery="false" valueType="includePath"> + <option id="com.atollic.truestudio.gpp.directories.select.105427562" name="Include path" superClass="com.atollic.truestudio.gpp.directories.select" useByScannerDiscovery="false" valueType="includePath"> <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable\GCC\ARM_CM3""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\include""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\Middlewares\Third_Party\FreeRTOS\Source\portable""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc\Legacy""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\HAL_Driver\Inc""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\core""/> - <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100\CMSIS\device""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM3""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/include""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/Middlewares/Third_Party/FreeRTOS/Source/portable""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/HAL_Driver/Inc/Legacy""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/inc""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/HAL_Driver/Inc""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/CMSIS/core""/> + <listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}/../TS100/CMSIS/device""/> </option> - <option id="com.atollic.truestudio.common_options.target.endianess.180632323" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.226626499" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.332354095" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.411631450" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.2094033204" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.117526596" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.optimization.prep_data.1064976160" name="Prepare dead data removal" superClass="com.atollic.truestudio.gpp.optimization.prep_data" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.605376730" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.1694893093" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.exe.release.toolchain.gpp.debug.info.1750102532" name="Debug Level" superClass="com.atollic.truestudio.exe.release.toolchain.gpp.debug.info" useByScannerDiscovery="false" value="com.atollic.truestudio.gpp.debug.info.3" valueType="enumerated"/> - <option id="com.atollic.truestudio.gpp.warnings.extra.1904215621" name="Enable extra warning flags" superClass="com.atollic.truestudio.gpp.warnings.extra" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.gpp.cppstandard.956269718" name="C++ standard" superClass="com.atollic.truestudio.gpp.cppstandard" useByScannerDiscovery="false" value="com.atollic.truestudio.gpp.cppstandard.gnupp14" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.interwork.2090493213" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.gpp.input.1570929745" superClass="com.atollic.truestudio.gpp.input"/> + <option id="com.atollic.truestudio.common_options.target.endianess.1128985254" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1586871784" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.1699158304" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpucore.799517054" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpu.1467318023" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.gpp.optimization.prep_garbage.16661934" name="Prepare dead code removal" superClass="com.atollic.truestudio.gpp.optimization.prep_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.prep_data.847840077" name="Prepare dead data removal" superClass="com.atollic.truestudio.gpp.optimization.prep_data" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_rtti.1986456046" name="Disable RTTI" superClass="com.atollic.truestudio.gpp.optimization.fno_rtti" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.optimization.fno_exceptions.1695726889" name="Disable exception handling" superClass="com.atollic.truestudio.gpp.optimization.fno_exceptions" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.exe.release.toolchain.gpp.debug.info.573774049" name="Debug Level" superClass="com.atollic.truestudio.exe.release.toolchain.gpp.debug.info" useByScannerDiscovery="false" value="com.atollic.truestudio.gpp.debug.info.3" valueType="enumerated"/> + <option id="com.atollic.truestudio.gpp.warnings.extra.1397196398" name="Enable extra warning flags" superClass="com.atollic.truestudio.gpp.warnings.extra" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.gpp.cppstandard.1578461032" name="C++ standard" superClass="com.atollic.truestudio.gpp.cppstandard" useByScannerDiscovery="false" value="com.atollic.truestudio.gpp.cppstandard.gnupp14" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.interwork.1841019237" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.gpp.optimization.no_strict_aliasing.140876649" name="No strict aliasing" superClass="com.atollic.truestudio.gpp.optimization.no_strict_aliasing" useByScannerDiscovery="false" value="false" valueType="boolean"/> + <inputType id="com.atollic.truestudio.gpp.input.1808551061" superClass="com.atollic.truestudio.gpp.input"/> </tool> - <tool command="arm-atollic-eabi-g++" commandLinePattern="${COMMAND} ${OUTPUT_FLAG} ${OUTPUT} ${INPUTS} ${FLAGS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.atollic.truestudio.exe.release.toolchain.ldcc.685067687" name="C++ Linker" superClass="com.atollic.truestudio.exe.release.toolchain.ldcc"> - <option id="com.atollic.truestudio.common_options.target.endianess.1475149192" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.common_options.target.mcpu.883743606" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.instr_set.1437340631" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpucore.1728249327" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.fpu.836905279" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.919153144" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> - <option id="com.atollic.truestudio.ldcc.general.scriptfile.707909104" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" useByScannerDiscovery="false" value="${workspace_loc:/${ProjName}}/../TS100/LinkerScript.ld" valueType="string"/> - <option id="com.atollic.truestudio.ldcc.misc.linkerflags.2099608034" name="Other options" superClass="com.atollic.truestudio.ldcc.misc.linkerflags" useByScannerDiscovery="false" value="-Wl,-cref,-u,Reset_Handler,-lm -Os -flto -Wl,--undefined=vTaskSwitchContext" valueType="string"/> - <option id="com.atollic.truestudio.ldcc.optimization.malloc_page_size.1762509052" name="Page size allocation for malloc() " superClass="com.atollic.truestudio.ldcc.optimization.malloc_page_size" useByScannerDiscovery="false" value="com.atollic.truestudio.ldcc.optimization.malloc_page_size.128" valueType="enumerated"/> - <option id="com.atollic.truestudio.common_options.target.interwork.1607969085" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> - <option id="com.atollic.truestudio.ldcc.misc.genmapfile.1321734634" name="Create map file" superClass="com.atollic.truestudio.ldcc.misc.genmapfile" useByScannerDiscovery="false"/> - <inputType id="com.atollic.truestudio.ldcc.input.1970565411" name="Input" superClass="com.atollic.truestudio.ldcc.input"> + <tool command="arm-atollic-eabi-g++" commandLinePattern="${COMMAND} ${OUTPUT_FLAG} ${OUTPUT} ${INPUTS} ${FLAGS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.atollic.truestudio.exe.release.toolchain.ldcc.1013199766" name="C++ Linker" superClass="com.atollic.truestudio.exe.release.toolchain.ldcc"> + <option id="com.atollic.truestudio.common_options.target.endianess.1775960878" name="Endianess" superClass="com.atollic.truestudio.common_options.target.endianess" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.common_options.target.mcpu.1518272966" name="Microcontroller" superClass="com.atollic.truestudio.common_options.target.mcpu" useByScannerDiscovery="false" value="STM32F103T8" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.instr_set.894185560" name="Instruction set" superClass="com.atollic.truestudio.common_options.target.instr_set" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.instr_set.thumb2" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpucore.475077421" name="FPU" superClass="com.atollic.truestudio.common_options.target.fpucore" useByScannerDiscovery="false" value="com.atollic.truestudio.common_options.target.fpucore.None" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.fpu.447842676" name="Floating point" superClass="com.atollic.truestudio.common_options.target.fpu" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.ldcc.optimization.do_garbage.66624246" name="Dead code removal" superClass="com.atollic.truestudio.ldcc.optimization.do_garbage" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <option id="com.atollic.truestudio.ldcc.general.scriptfile.2062504590" name="Linker script" superClass="com.atollic.truestudio.ldcc.general.scriptfile" useByScannerDiscovery="false" value="${workspace_loc:/${ProjName}}/../TS100/LinkerScript.ld" valueType="string"/> + <option id="com.atollic.truestudio.ldcc.misc.linkerflags.1610144515" name="Other options" superClass="com.atollic.truestudio.ldcc.misc.linkerflags" useByScannerDiscovery="false" value="-Wl,-cref,-u,Reset_Handler,-lm -Os -flto -Wl,--undefined=vTaskSwitchContext" valueType="string"/> + <option id="com.atollic.truestudio.ldcc.optimization.malloc_page_size.1767957270" name="Page size allocation for malloc() " superClass="com.atollic.truestudio.ldcc.optimization.malloc_page_size" useByScannerDiscovery="false" value="com.atollic.truestudio.ldcc.optimization.malloc_page_size.128" valueType="enumerated"/> + <option id="com.atollic.truestudio.common_options.target.interwork.1199042351" name="Mix ARM/Thumb" superClass="com.atollic.truestudio.common_options.target.interwork" useByScannerDiscovery="false"/> + <option id="com.atollic.truestudio.ldcc.misc.genmapfile.291052850" name="Create map file" superClass="com.atollic.truestudio.ldcc.misc.genmapfile" useByScannerDiscovery="false"/> + <inputType id="com.atollic.truestudio.ldcc.input.1870355596" name="Input" superClass="com.atollic.truestudio.ldcc.input"> <additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/> <additionalInput kind="additionalinput" paths="$(LIBS)"/> </inputType> </tool> - <tool id="com.atollic.truestudio.ar.base.1980044389" name="Archiver" superClass="com.atollic.truestudio.ar.base"/> - <tool command="arm-atollic-reports.jar" commandLinePattern="${COMMAND} ${FLAGS} ${INPUTS}" errorParsers="" id="com.atollic.truestudio.exe.release.toolchain.secoutput.1782930068" name="Other" superClass="com.atollic.truestudio.exe.release.toolchain.secoutput"> - <option id="com.atollic.truestudio.secoutput.general.convert.1196746231" name="Convert build output" superClass="com.atollic.truestudio.secoutput.general.convert" useByScannerDiscovery="false" value="true" valueType="boolean"/> + <tool id="com.atollic.truestudio.ar.base.1675641595" name="Archiver" superClass="com.atollic.truestudio.ar.base"/> + <tool command="arm-atollic-reports.jar" commandLinePattern="${COMMAND} ${FLAGS} ${INPUTS}" errorParsers="" id="com.atollic.truestudio.exe.release.toolchain.secoutput.1463971170" name="Other" superClass="com.atollic.truestudio.exe.release.toolchain.secoutput"> + <option id="com.atollic.truestudio.secoutput.general.convert.1259799538" name="Convert build output" superClass="com.atollic.truestudio.secoutput.general.convert" useByScannerDiscovery="false" value="true" valueType="boolean"/> </tool> </toolChain> </folderInfo> diff --git a/workspace/TS100A/.gitignore b/workspace/TS100A/.gitignore index c4a1dda3..5221ec2e 100644 --- a/workspace/TS100A/.gitignore +++ b/workspace/TS100A/.gitignore @@ -1,3 +1,5 @@ /Release/ /TS100/ /TS100_LOCAL/ +/ReleaseTS80/ +/ReleaseTS100/ diff --git a/workspace/TS100A/.settings/language.settings.xml b/workspace/TS100A/.settings/language.settings.xml index 0a28b70f..d6ecf5e6 100644 --- a/workspace/TS100A/.settings/language.settings.xml +++ b/workspace/TS100A/.settings/language.settings.xml @@ -1,6 +1,6 @@ <?xml version="1.0" encoding="UTF-8" standalone="no"?> <project> - <configuration id="com.atollic.truestudio.configuration.release.200032419" name="Release"> + <configuration id="com.atollic.truestudio.configuration.release.200032419" name="ReleaseTS100"> <extension point="org.eclipse.cdt.core.LanguageSettingsProvider"> <provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/> <provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/> @@ -10,17 +10,7 @@ </provider> </extension> </configuration> - <configuration id="com.atollic.truestudio.configuration.release.200032419.2005314669" name="TS100"> - <extension point="org.eclipse.cdt.core.LanguageSettingsProvider"> - <provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/> - <provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/> - <provider class="com.atollic.truestudio.mbs.GCCSpecsDetectorAtollicArm" console="false" env-hash="-133272683506189437" id="com.atollic.truestudio.mbs.provider" keep-relative-paths="false" name="Atollic ARM Tools Language Settings" parameter="${COMMAND} -E -P -v -dD "${INPUTS}"" prefer-non-shared="true"> - <language-scope id="org.eclipse.cdt.core.gcc"/> - <language-scope id="org.eclipse.cdt.core.g++"/> - </provider> - </extension> - </configuration> - <configuration id="com.atollic.truestudio.configuration.release.200032419.2005314669.1746279461" name="TS100_LOCAL"> + <configuration id="com.atollic.truestudio.configuration.release.200032419.567701681" name="ReleaseTS80"> <extension point="org.eclipse.cdt.core.LanguageSettingsProvider"> <provider copy-of="extension" id="org.eclipse.cdt.ui.UserLanguageSettingsProvider"/> <provider-reference id="org.eclipse.cdt.managedbuilder.core.MBSLanguageSettingsProvider" ref="shared-provider"/> diff --git a/workspace/TS100A/.settings/org.eclipse.cdt.managedbuilder.core.prefs b/workspace/TS100A/.settings/org.eclipse.cdt.managedbuilder.core.prefs index 331f04f5..50e6de99 100644 --- a/workspace/TS100A/.settings/org.eclipse.cdt.managedbuilder.core.prefs +++ b/workspace/TS100A/.settings/org.eclipse.cdt.managedbuilder.core.prefs @@ -11,6 +11,12 @@ environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.2005314669/C_INCLUDE_PATH/operation=remove environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.2005314669/append=true environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.2005314669/appendContributed=true +environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.567701681/CPATH/delimiter=\: +environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.567701681/CPATH/operation=remove +environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.567701681/C_INCLUDE_PATH/delimiter=\: +environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.567701681/C_INCLUDE_PATH/operation=remove +environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.567701681/append=true +environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419.567701681/appendContributed=true environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419/CPATH/delimiter=; environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419/CPATH/operation=remove environment/buildEnvironmentInclude/com.atollic.truestudio.configuration.release.200032419/C_INCLUDE_PATH/delimiter=; @@ -25,6 +31,10 @@ environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419.2005314669/LIBRARY_PATH/operation=remove environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419.2005314669/append=true environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419.2005314669/appendContributed=true +environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419.567701681/LIBRARY_PATH/delimiter=\: +environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419.567701681/LIBRARY_PATH/operation=remove +environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419.567701681/append=true +environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419.567701681/appendContributed=true environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419/LIBRARY_PATH/delimiter=; environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419/LIBRARY_PATH/operation=remove environment/buildEnvironmentLibrary/com.atollic.truestudio.configuration.release.200032419/append=true |