1 files changed, 7 insertions, 9 deletions
diff --git a/Documentation/Flashing.md b/Documentation/Flashing.md
index efe80b73..98f120e6 100644
--- a/Documentation/Flashing.md
+++ b/Documentation/Flashing.md
@@ -96,15 +96,13 @@ If your OS is not currently supported by the [Updater](https://github.com/pine64
 
 ### Steps
 
-<div role="note" class="template-box" style="display: table; min-width: 16em; min-height: 1.6em; margin: .5em 0 1em; padding: .5em 1em; border: 1px solid #d33; color: black; background-color: #fee7e6;"><strong>Warning:</strong> Do not have a barrel jack PSU plugged in at the same time as a USB-C cable. Doing this will severely damage your computer, or Type-C PSU.</div>
-
-   1. ⚠️ Never have DC power plugged into Pinecil when you are updating firmware, only use a USB-C cable or you may destroy something.
-   2. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases)
-   3. Enter DFU mode: hold down the (-) button at the back of the iron (do not release it).
-   4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (-) button down.
-   5. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
-   6. Once USB cable is connected at two ends, wait additional 10 seconds, then release the (-) button. 
-   7. Continue to the next section below for your specific OS to complete loading the `.dfu` file onto Pinecil.
+⚠️ 1.❗ Never have DC power plugged into Pinecil when you are updating firmware, only use a USB-C cable or you may destroy something.
+    2. Download and extract the firmware package from Github [IronOS Releases](https://github.com/Ralim/IronOS/releases)
+    3. Enter DFU mode: hold down the (-) button at the back of the iron (do not release it).
+    4. Connect USB to PC, and USB-C to back of Pinecil, keep holding (-) button down.
+    5. The screen will stay **black/off** to indicate the Pinecil is in DFU mode. This is normal.
+    6. Once USB cable is connected at two ends, wait additional 10 seconds, then release the (-) button. 
+    7. Continue to the next section below for your specific OS to complete loading the `.dfu` file onto Pinecil.
 
 ### Linux and Mac