aboutsummaryrefslogtreecommitdiffhomepage
path: root/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
diff options
context:
space:
mode:
Diffstat (limited to 'Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c')
-rw-r--r--Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c314
1 files changed, 0 insertions, 314 deletions
diff --git a/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c b/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
deleted file mode 100644
index fa94eb23..00000000
--- a/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f10x_bkp.c
- * @author MCD Application Team
- * @version V3.6.1
- * @date 05-March-2012
- * @brief This file provides all the BKP firmware functions.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
- *
- * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
- * You may not use this file except in compliance with the License.
- * You may obtain a copy of the License at:
- *
- * http://www.st.com/software_license_agreement_liberty_v2
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_bkp.h"
-#include "stm32f10x_rcc.h"
-
-/** @addtogroup STM32F10x_StdPeriph_Driver
- * @{
- */
-
-/** @defgroup BKP
- * @brief BKP driver modules
- * @{
- */
-
-/** @defgroup BKP_Private_TypesDefinitions
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup BKP_Private_Defines
- * @{
- */
-
-/* ------------ BKP registers bit address in the alias region --------------- */
-#define BKP_OFFSET (BKP_BASE - PERIPH_BASE)
-
-/* --- CR Register ----*/
-
-/* Alias word address of TPAL bit */
-#define CR_OFFSET (BKP_OFFSET + 0x30)
-#define TPAL_BitNumber 0x01
-#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4))
-
-/* Alias word address of TPE bit */
-#define TPE_BitNumber 0x00
-#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4))
-
-/* --- CSR Register ---*/
-
-/* Alias word address of TPIE bit */
-#define CSR_OFFSET (BKP_OFFSET + 0x34)
-#define TPIE_BitNumber 0x02
-#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4))
-
-/* Alias word address of TIF bit */
-#define TIF_BitNumber 0x09
-#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4))
-
-/* Alias word address of TEF bit */
-#define TEF_BitNumber 0x08
-#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4))
-
-/* ---------------------- BKP registers bit mask ------------------------ */
-
-/* RTCCR register bit mask */
-#define RTCCR_CAL_MASK ((uint16_t)0xFF80)
-#define RTCCR_MASK ((uint16_t)0xFC7F)
-
-/**
- * @}
- */
-
-
-/** @defgroup BKP_Private_Macros
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup BKP_Private_Variables
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup BKP_Private_FunctionPrototypes
- * @{
- */
-
-/**
- * @}
- */
-
-/** @defgroup BKP_Private_Functions
- * @{
- */
-
-/**
- * @brief Deinitializes the BKP peripheral registers to their default reset values.
- * @param None
- * @retval None
- */
-void BKP_DeInit(void)
-{
- RCC_BackupResetCmd(ENABLE);
- RCC_BackupResetCmd(DISABLE);
-}
-
-/**
- * @brief Configures the Tamper Pin active level.
- * @param BKP_TamperPinLevel: specifies the Tamper Pin active level.
- * This parameter can be one of the following values:
- * @arg BKP_TamperPinLevel_High: Tamper pin active on high level
- * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level
- * @retval None
- */
-void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel)
-{
- /* Check the parameters */
- assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel));
- *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel;
-}
-
-/**
- * @brief Enables or disables the Tamper Pin activation.
- * @param NewState: new state of the Tamper Pin activation.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void BKP_TamperPinCmd(FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState;
-}
-
-/**
- * @brief Enables or disables the Tamper Pin Interrupt.
- * @param NewState: new state of the Tamper Pin Interrupt.
- * This parameter can be: ENABLE or DISABLE.
- * @retval None
- */
-void BKP_ITConfig(FunctionalState NewState)
-{
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(NewState));
- *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState;
-}
-
-/**
- * @brief Select the RTC output source to output on the Tamper pin.
- * @param BKP_RTCOutputSource: specifies the RTC output source.
- * This parameter can be one of the following values:
- * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin.
- * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency
- * divided by 64 on the Tamper pin.
- * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on
- * the Tamper pin.
- * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on
- * the Tamper pin.
- * @retval None
- */
-void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource)
-{
- uint16_t tmpreg = 0;
- /* Check the parameters */
- assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource));
- tmpreg = BKP->RTCCR;
- /* Clear CCO, ASOE and ASOS bits */
- tmpreg &= RTCCR_MASK;
-
- /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */
- tmpreg |= BKP_RTCOutputSource;
- /* Store the new value */
- BKP->RTCCR = tmpreg;
-}
-
-/**
- * @brief Sets RTC Clock Calibration value.
- * @param CalibrationValue: specifies the RTC Clock Calibration value.
- * This parameter must be a number between 0 and 0x7F.
- * @retval None
- */
-void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue)
-{
- uint16_t tmpreg = 0;
- /* Check the parameters */
- assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue));
- tmpreg = BKP->RTCCR;
- /* Clear CAL[6:0] bits */
- tmpreg &= RTCCR_CAL_MASK;
- /* Set CAL[6:0] bits according to CalibrationValue value */
- tmpreg |= CalibrationValue;
- /* Store the new value */
- BKP->RTCCR = tmpreg;
-}
-
-/**
- * @brief Writes user data to the specified Data Backup Register.
- * @param BKP_DR: specifies the Data Backup Register.
- * This parameter can be BKP_DRx where x:[1, 42]
- * @param Data: data to write
- * @retval None
- */
-void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_BKP_DR(BKP_DR));
-
- tmp = (uint32_t)BKP_BASE;
- tmp += BKP_DR;
-
- *(__IO uint32_t *) tmp = Data;
-}
-
-/**
- * @brief Reads data from the specified Data Backup Register.
- * @param BKP_DR: specifies the Data Backup Register.
- * This parameter can be BKP_DRx where x:[1, 42]
- * @retval The content of the specified Data Backup Register
- */
-uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_BKP_DR(BKP_DR));
-
- tmp = (uint32_t)BKP_BASE;
- tmp += BKP_DR;
-
- return (*(__IO uint16_t *) tmp);
-}
-
-/**
- * @brief Checks whether the Tamper Pin Event flag is set or not.
- * @param None
- * @retval The new state of the Tamper Pin Event flag (SET or RESET).
- */
-FlagStatus BKP_GetFlagStatus(void)
-{
- return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB);
-}
-
-/**
- * @brief Clears Tamper Pin Event pending flag.
- * @param None
- * @retval None
- */
-void BKP_ClearFlag(void)
-{
- /* Set CTE bit to clear Tamper Pin Event flag */
- BKP->CSR |= BKP_CSR_CTE;
-}
-
-/**
- * @brief Checks whether the Tamper Pin Interrupt has occurred or not.
- * @param None
- * @retval The new state of the Tamper Pin Interrupt (SET or RESET).
- */
-ITStatus BKP_GetITStatus(void)
-{
- return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB);
-}
-
-/**
- * @brief Clears Tamper Pin Interrupt pending bit.
- * @param None
- * @retval None
- */
-void BKP_ClearITPendingBit(void)
-{
- /* Set CTI bit to clear Tamper Pin Interrupt pending bit */
- BKP->CSR |= BKP_CSR_CTI;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 05:13:29 +0000