aboutsummaryrefslogtreecommitdiffhomepage
path: root/Translations/translations_definitions.json
diff options
context:
space:
mode:
Diffstat (limited to 'Translations/translations_definitions.json')
-rw-r--r--Translations/translations_definitions.json173
1 files changed, 137 insertions, 36 deletions
diff --git a/Translations/translations_definitions.json b/Translations/translations_definitions.json
index 5cfe4302..96ad0c50 100644
--- a/Translations/translations_definitions.json
+++ b/Translations/translations_definitions.json
@@ -18,7 +18,9 @@
},
{
"id": "NoPowerDeliveryMessage",
- "include": ["POW_PD"],
+ "include": [
+ "POW_PD"
+ ],
"description": "The IC required for USB-PD could not be communicated with. This is an error warning that USB-PD WILL NOT FUNCTION. Generally indicative of either a hardware or software issues."
},
{
@@ -56,44 +58,58 @@
{
"id": "UVLOWarningString",
"maxLen": 8,
- "include": ["POW_DC"],
+ "include": [
+ "POW_DC"
+ ],
"description": "Warning text shown when the unit turns off due to undervoltage in simple mode."
},
{
"id": "UndervoltageString",
"maxLen": 15,
- "include": ["POW_DC"],
+ "include": [
+ "POW_DC"
+ ],
"description": "Warning text shown when the unit turns off due to undervoltage in advanced mode."
},
{
"id": "InputVoltageString",
"maxLen": 11,
"note": "Preferably end with a space",
- "include": ["POW_DC"],
+ "include": [
+ "POW_DC"
+ ],
"description": "Prefix text for 'Input Voltage' shown before showing the input voltage reading."
},
{
"id": "ProfilePreheatString",
"maxLen": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Shown in profile mode while preheating"
},
{
"id": "ProfileCooldownString",
"maxLen": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Shown in profile mode while cooling down"
},
{
"id": "SleepingAdvancedString",
"maxLen": 15,
- "exclude": ["NO_SLEEP_MODE"],
+ "exclude": [
+ "NO_SLEEP_MODE"
+ ],
"description": "The text shown to indicate the unit is in sleep mode when the advanced view is turned on."
},
{
"id": "SleepingTipAdvancedString",
"maxLen": 6,
- "exclude": ["NO_SLEEP_MODE"],
+ "exclude": [
+ "NO_SLEEP_MODE"
+ ],
"description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on."
},
{
@@ -104,7 +120,9 @@
{
"id": "TooHotToStartProfileWarning",
"default": "Too hot to\nstart profile",
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Shown when profile mode is started while the device is too hot."
}
],
@@ -172,7 +190,10 @@
"id": "PowerMenu",
"maxLen": 5,
"maxLen2": 11,
- "include": ["POW_DC", "POW_QC"],
+ "include": [
+ "POW_DC",
+ "POW_QC"
+ ],
"description": "Menu for settings related to power. Main settings to do with the input voltage."
},
{
@@ -212,6 +233,30 @@
{
"id": "USBPDModeSafe",
"description": "When in this mode we enable all PD features, but we don't pad resistance slightly to account for cable and PCB trace loss"
+ },
+ {
+ "id": "TipTypeAuto",
+ "description": "This is for automatic best-effort tip selection based on resistance"
+ },
+ {
+ "id": "TipTypeT12Long",
+ "description": "Hakko T12 or older (long) TS100 tips"
+ },
+ {
+ "id": "TipTypeT12Short",
+ "description": "Pine 6.2 ohm short TS100 style tips"
+ },
+ {
+ "id": "TipTypeT12PTS",
+ "description": "PTS200 4 ohm short TS100 style tips"
+ },
+ {
+ "id": "TipTypeTS80",
+ "description": "Miniware TS80(P) tips"
+ },
+ {
+ "id": "TipTypeJBC",
+ "description": "JBC (or clone) tips"
}
],
"menuOptions": [
@@ -219,35 +264,45 @@
"id": "DCInCutoff",
"maxLen": 5,
"maxLen2": 11,
- "include": ["POW_DC"],
+ "include": [
+ "POW_DC"
+ ],
"description": "When the device is powered by a battery, this adjusts the low voltage threshold for when the unit should turn off the heater to protect the battery."
},
{
"id": "MinVolCell",
"maxLen": 4,
"maxLen2": 9,
- "include": ["POW_DC"],
+ "include": [
+ "POW_DC"
+ ],
"description": "When powered by a battery, this adjusts the minimum voltage per cell before shutdown. (This is multiplied by the cell count.)"
},
{
"id": "QCMaxVoltage",
"maxLen": 8,
"maxLen2": 15,
- "include": ["POW_QC"],
+ "include": [
+ "POW_QC"
+ ],
"description": "This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply."
},
{
"id": "PDNegTimeout",
"maxLen": 8,
"maxLen2": 15,
- "include": ["POW_PD"],
+ "include": [
+ "POW_PD"
+ ],
"description": "How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values."
},
{
"id": "USBPDMode",
"maxLen": 7,
"maxLen2": 15,
- "include": ["POW_PD"],
+ "include": [
+ "POW_PD"
+ ],
"description": "No Dynamic disables EPR & PPS, Safe mode does not use padding resistance"
},
{
@@ -284,98 +339,126 @@
"id": "ProfilePhases",
"maxLen": 6,
"maxLen2": 13,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "set the number of phases for profile mode."
},
{
"id": "ProfilePreheatTemp",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Preheat to this temperature at the start of profile mode."
},
{
"id": "ProfilePreheatSpeed",
"maxLen": 5,
"maxLen2": 11,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "How fast the temperature is allowed to rise during the preheat phase at the start of profile mode."
},
{
"id": "ProfilePhase1Temp",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Target temperature for the end of phase 1 of profile mode."
},
{
"id": "ProfilePhase1Duration",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Duration of phase 1 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
},
{
"id": "ProfilePhase2Temp",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Target temperature for the end of phase 2 of profile mode."
},
{
"id": "ProfilePhase2Duration",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Duration of phase 2 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
},
{
"id": "ProfilePhase3Temp",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Target temperature for the end of phase 3 of profile mode."
},
{
"id": "ProfilePhase3Duration",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Duration of phase 3 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
},
{
"id": "ProfilePhase4Temp",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Target temperature for the end of phase 5 of profile mode."
},
{
"id": "ProfilePhase4Duration",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
},
{
"id": "ProfilePhase5Temp",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Target temperature for the end of phase 5 of profile mode."
},
{
"id": "ProfilePhase5Duration",
"maxLen": 4,
"maxLen2": 9,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
},
{
"id": "ProfileCooldownSpeed",
"maxLen": 5,
"maxLen2": 11,
- "include": ["PROFILE_SUPPORT"],
+ "include": [
+ "PROFILE_SUPPORT"
+ ],
"description": "How fast the temperature is allowed to drop during the cooldown phase at the end of profile mode."
},
{
@@ -388,14 +471,18 @@
"id": "SleepTemperature",
"maxLen": 4,
"maxLen2": 9,
- "exclude": ["NO_SLEEP_MODE"],
+ "exclude": [
+ "NO_SLEEP_MODE"
+ ],
"description": "Temperature the device will drop down to while asleep. Typically around halfway between off and soldering temperature."
},
{
"id": "SleepTimeout",
"maxLen": 4,
"maxLen2": 9,
- "exclude": ["NO_SLEEP_MODE"],
+ "exclude": [
+ "NO_SLEEP_MODE"
+ ],
"description": "How long of a period without movement / button-pressing is required before the device drops down to the sleep temperature."
},
{
@@ -408,14 +495,18 @@
"id": "HallEffSensitivity",
"maxLen": 6,
"maxLen2": 13,
- "include": ["HALL_SENSOR"],
+ "include": [
+ "HALL_SENSOR"
+ ],
"description": "If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is at detecting a magnet to put the device into sleep mode."
},
{
"id": "HallEffSleepTimeout",
"maxLen": 10,
"maxLen2": 10,
- "include": ["HALL_SENSOR"],
+ "include": [
+ "HALL_SENSOR"
+ ],
"description": "If the unit has a hall effect sensor (Pinecil), this adjusts how long the device takes before it drops down to the sleep temperature when hall sensor is over threshold."
},
{
@@ -428,7 +519,9 @@
"id": "DisplayRotation",
"maxLen": 6,
"maxLen2": 13,
- "exclude": ["NO_DISPLAY_ROTATE"],
+ "exclude": [
+ "NO_DISPLAY_ROTATE"
+ ],
"description": "If the display should rotate automatically or if it should be fixed for left- or right-handed mode."
},
{
@@ -495,7 +588,9 @@
"id": "BluetoothLE",
"maxLen": 7,
"maxLen2": 15,
- "include": ["BLE_ENABLED"],
+ "include": [
+ "BLE_ENABLED"
+ ],
"description": "Should BLE be enabled at boot time."
},
{
@@ -545,6 +640,12 @@
"maxLen": 7,
"maxLen2": 15,
"description": "Changes the device language on multi-lingual builds."
+ },
+ {
+ "id": "SolderingTipType",
+ "maxLen": 7,
+ "maxLen2": 15,
+ "description": "For manually selecting the type of tip fitted"
}
]
-}
+} \ No newline at end of file