diff options
Diffstat (limited to 'source/Core/BSP')
| -rw-r--r-- | source/Core/BSP/MHP30/BSP.cpp | 1 | ||||
| -rw-r--r-- | source/Core/BSP/MHP30/configuration.h | 39 |
2 files changed, 19 insertions, 21 deletions
diff --git a/source/Core/BSP/MHP30/BSP.cpp b/source/Core/BSP/MHP30/BSP.cpp index 1561ec06..12dac966 100644 --- a/source/Core/BSP/MHP30/BSP.cpp +++ b/source/Core/BSP/MHP30/BSP.cpp @@ -12,7 +12,6 @@ #include "main.hpp"
#include <IRQ.h>
-
WS2812<GPIOA_BASE, WS2812_Pin, 1> ws2812;
volatile uint16_t PWMSafetyTimer = 0;
volatile uint8_t pendingPWM = 0;
diff --git a/source/Core/BSP/MHP30/configuration.h b/source/Core/BSP/MHP30/configuration.h index b6f4104c..21e39fd9 100644 --- a/source/Core/BSP/MHP30/configuration.h +++ b/source/Core/BSP/MHP30/configuration.h @@ -118,26 +118,25 @@ #endif #ifdef MODEL_MHP30 -#define SOLDERING_TEMP 200 // Default soldering temp is 200.0 °C -#define VOLTAGE_DIV 360 // Default for MHP30 -#define PID_POWER_LIMIT 65 // Sets the max pwm power limit -#define CALIBRATION_OFFSET 0 // the adc offset in uV - MHP compensates automagically -#define POWER_LIMIT 65 // 65 watts default power limit -#define MAX_POWER_LIMIT 65 // -#define POWER_LIMIT_STEPS 1 // -#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_MHP30 // -#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate -#define MODEL_HAS_DCDC // Has inductor to current filter -#define PID_TIM_HZ (16) // -#define THERMAL_MASS_OVERSHOOTS // We have overshoot so reverse direction of compensation -#define MAX_TEMP_C 300 // Max soldering temp selectable °C -#define MAX_TEMP_F 570 // Max soldering temp selectable °F -#define MIN_TEMP_C 10 // Min soldering temp selectable °C -#define MIN_TEMP_F 60 // Min soldering temp selectable °F -#define MIN_BOOST_TEMP_C 150 // The min settable temp for boost mode °C -#define MIN_BOOST_TEMP_F 300 // The min settable temp for boost mode °F -#define NO_DISPLAY_ROTATE // Disable OLED rotation by accel -#define SLEW_LIMIT 50 // Limit to 3.0 Watts per 64ms pid loop update rate slew rate +#define SOLDERING_TEMP 200 // Default soldering temp is 200.0 °C +#define VOLTAGE_DIV 360 // Default for MHP30 +#define PID_POWER_LIMIT 65 // Sets the max pwm power limit +#define CALIBRATION_OFFSET 0 // the adc offset in uV - MHP compensates automagically +#define POWER_LIMIT 65 // 65 watts default power limit +#define MAX_POWER_LIMIT 65 // +#define POWER_LIMIT_STEPS 1 // +#define OP_AMP_GAIN_STAGE OP_AMP_GAIN_STAGE_MHP30 // +#define USB_PD_VMAX 20 // Maximum voltage for PD to negotiate +#define MODEL_HAS_DCDC // Has inductor to current filter +#define PID_TIM_HZ (16) // +#define MAX_TEMP_C 300 // Max soldering temp selectable °C +#define MAX_TEMP_F 570 // Max soldering temp selectable °F +#define MIN_TEMP_C 10 // Min soldering temp selectable °C +#define MIN_TEMP_F 60 // Min soldering temp selectable °F +#define MIN_BOOST_TEMP_C 150 // The min settable temp for boost mode °C +#define MIN_BOOST_TEMP_F 300 // The min settable temp for boost mode °F +#define NO_DISPLAY_ROTATE // Disable OLED rotation by accel +#define SLEW_LIMIT 50 // Limit to 3.0 Watts per 64ms pid loop update rate slew rate #define ACCEL_MSA #define POW_PD #define TEMP_NTC |