diff options
Diffstat (limited to 'workspace/ts100/inc/CTRL.h')
| -rw-r--r-- | workspace/ts100/inc/CTRL.h | 70 |
1 files changed, 0 insertions, 70 deletions
diff --git a/workspace/ts100/inc/CTRL.h b/workspace/ts100/inc/CTRL.h deleted file mode 100644 index 58745dfe..00000000 --- a/workspace/ts100/inc/CTRL.h +++ /dev/null @@ -1,70 +0,0 @@ -/********************* (C) COPYRIGHT 2015 e-Design Co.,Ltd. **********************
- File Name : CTRL.h
- Version : S100 APP Ver 2.11
- Description:
- Author : Celery
- Data: 2015/07/07
- History:
- 2015/07/07 ͳһ������
- *******************************************************************************/
-#ifndef _CTRL_H
-#define _CTRL_H
-
-#include "stm32f10x.h"
-#include "Bios.h"
-
-#define TEMPSHOW_TIMER gTime[0]/*TEMPSHOW_TIMER*/
-#define HEATING_TIMER gTime[1]/*HEATING_TIMER*/
-#define ENTER_WAIT_TIMER gTime[2]/*ENTER_WAIT_TIMER*/
-#define EFFECTIVE_KEY_TIMER gTime[3]/*EFFECTIVE_KEY_TIMER*/
-#define LEAVE_WAIT_TIMER gTime[4]/*LEAVE_WAIT_TIMER*/
-#define G6_TIMER gTime[5]/*SWITCH_SHOW_TIMER*/
-#define UI_TIMER gTime[6]/*UI_TIMER ͼ���������ʱ�����*/
-#define KD_TIMER gTime[7]/*������ʱ*/
-
-///^^-- All the times in gTime are decremented by 1 if >0 by timer2 tick <bottom of bios.c>
-//------------------------------ ��������------------------------------------//
-#define KEY_ST(KEY_PIN) GPIO_ReadInputDataBit(GPIOA, KEY_PIN)
-#define NO_KEY 0x0 /*NO Keys pressed*/
-#define KEY_V1 0x0100/*V1 key pressed*/
-#define KEY_V2 0x0040/*V2 Key pressed*/
-#define KEY_CN 0X8000/*(Long key press i think)*/
-#define KEY_V3 (KEY_V1|KEY_V2)/*Both Keys pressed*/
-
-typedef enum WORK_STATUS {
- IDLE = 1, //System is idle
- THERMOMETER, //Thermometer mode, basically reads sensor and shows temp
- TEMP_CTR, //Soldering Mode (Temp Controlled)
- WAIT, //System in wait state
- TEMP_SET, //Setting the soldering temp
- CONFIG, //system config mode
- MODE_CNG, //DFU mode i think??
- ALARM, //An alarm has been fired
-} WORK_STATUS;
-
-typedef enum WARNING_STATUS {
- NORMAL_TEMP = 1, HIGH_TEMP, SEN_ERR, HIGH_VOLTAGE, LOW_VOLTAGE,
-} WARNING_STATUS;
-
-typedef struct {
- u8 ver[16];
- s16 t_standby; // 200��C=1800 2520,�����¶�
- s16 t_work; // 350��C=3362, �����¶�
- s16 t_step; //����
- u32 wait_time; //3*60*100 3 mintute
- u32 idle_time; //6*60*100 6 minute
-} DEVICE_INFO_SYS;
-
-extern DEVICE_INFO_SYS device_info;
-void Set_PrevTemp(s16 Temp);
-u8 Get_CtrlStatus(void);
-void Set_CtrlStatus(u8 status);
-s16 Get_TempVal(void);
-u16 Get_HtFlag(void);
-void System_Init(void);
-void Pid_Init(void);
-u16 Pid_Realize(s16 temp);
-u32 Heating_Time(s16 temp, s16 wk_temp);
-void Status_Tran(void);
-#endif
-/******************************** END OF FILE *********************************/
|