diff options
Diffstat (limited to 'workspace/ts100/inc/usb_scsi.h')
| -rw-r--r-- | workspace/ts100/inc/usb_scsi.h | 125 |
1 files changed, 0 insertions, 125 deletions
diff --git a/workspace/ts100/inc/usb_scsi.h b/workspace/ts100/inc/usb_scsi.h deleted file mode 100644 index 1e9a9ccd..00000000 --- a/workspace/ts100/inc/usb_scsi.h +++ /dev/null @@ -1,125 +0,0 @@ -/******************** (C) COPYRIGHT 2015 e-Design Co., Ltd. ********************
- File Name : USB_scsi.h
- Version : STM32 USB Disk Ver 3.4 Author : MCD Application Team & bure
-*******************************************************************************/
-#ifndef __USB_SCSI_H
-#define __USB_SCSI_H
-
-#ifdef STM32F30X
- #include "stm32f30x.h"
-#else
- #include "stm32f10x.h"
-#endif
-
-/* SCSI Commands */
-#define SCSI_FORMAT_UNIT 0x04
-#define SCSI_INQUIRY 0x12
-#define SCSI_MODE_SELECT6 0x15
-#define SCSI_MODE_SELECT10 0x55
-#define SCSI_MODE_SENSE6 0x1A
-#define SCSI_MODE_SENSE10 0x5A
-#define SCSI_ALLOW_MEDIUM_REMOVAL 0x1E
-#define SCSI_READ6 0x08
-#define SCSI_READ10 0x28
-#define SCSI_READ12 0xA8
-#define SCSI_READ16 0x88
-
-#define SCSI_READ_CAPACITY10 0x25
-#define SCSI_READ_CAPACITY16 0x9E
-
-#define SCSI_REQUEST_SENSE 0x03
-#define SCSI_START_STOP_UNIT 0x1B
-#define SCSI_TEST_UNIT_READY 0x00
-#define SCSI_WRITE6 0x0A
-#define SCSI_WRITE10 0x2A
-#define SCSI_WRITE12 0xAA
-#define SCSI_WRITE16 0x8A
-
-#define SCSI_VERIFY10 0x2F
-#define SCSI_VERIFY12 0xAF
-#define SCSI_VERIFY16 0x8F
-
-#define SCSI_SEND_DIAGNOSTIC 0x1D
-#define SCSI_READ_FORMAT_CAPACITIES 0x23
-
-#define NO_SENSE 0
-#define RECOVERED_ERROR 1
-#define NOT_READY 2
-#define MEDIUM_ERROR 3
-#define HARDWARE_ERROR 4
-#define ILLEGAL_REQUEST 5
-#define UNIT_ATTENTION 6
-#define DATA_PROTECT 7
-#define BLANK_CHECK 8
-#define VENDOR_SPECIFIC 9
-#define COPY_ABORTED 10
-#define ABORTED_COMMAND 11
-#define VOLUME_OVERFLOW 13
-#define MISCOMPARE 14
-
-
-#define INVALID_COMMAND 0x20
-#define INVALID_FIELED_IN_COMMAND 0x24
-#define PARAMETER_LIST_LENGTH_ERROR 0x1A
-#define INVALID_FIELD_IN_PARAMETER_LIST 0x26
-#define ADDRESS_OUT_OF_RANGE 0x21
-#define MEDIUM_NOT_PRESENT 0x3A
-#define MEDIUM_HAVE_CHANGED 0x28
-
-#define READ_FORMAT_CAPACITY_DATA_LEN 0x0C
-#define READ_CAPACITY10_DATA_LEN 0x08
-#define MODE_SENSE10_DATA_LEN 0x08
-#define MODE_SENSE6_DATA_LEN 0x04
-#define REQUEST_SENSE_DATA_LEN 0x12
-#define STANDARD_INQUIRY_DATA_LEN 0x24 // 0x24
-#define BLKVFY 0x04
-
-extern u8 Page00_Inquiry_Data[];
-extern u8 Standard_Inquiry_Data[];
-extern u8 Mode_Sense6_data[];
-extern u8 Mode_Sense10_data[];
-extern u8 Scsi_Sense_Data[];
-extern u8 ReadCapacity10_Data[];
-
-extern u8 Bot_State;
-
-void SCSI_Inquiry_Cmd(void);
-void SCSI_ReadFormatCapacity_Cmd(void);
-void SCSI_ReadCapacity10_Cmd(void);
-void SCSI_RequestSense_Cmd (void);
-void SCSI_Start_Stop_Unit_Cmd(void);
-void SCSI_ModeSense6_Cmd (void);
-void SCSI_ModeSense10_Cmd (void);
-void SCSI_Write10_Cmd(u32 LBA , u32 BlockNbr);
-void SCSI_Read10_Cmd(u32 LBA , u32 BlockNbr);
-void SCSI_Verify10_Cmd(void);
-
-void SCSI_Invalid_Cmd(void);
-void SCSI_Valid_Cmd(void);
-u8 SCSI_Address_Management(u8 Cmd , u32 LBA , u32 BlockNbr);
-
-void Set_Scsi_Sense_Data(u8 Sens_Key, u8 Asc);
-void SCSI_TestUnitReady_Cmd (void);
-void SCSI_Format_Cmd (void);
-
-#define SCSI_Prevent_Removal_Cmd SCSI_Valid_Cmd
-
-// Invalid (Unsupported) commands
-#define SCSI_READ_CAPACITY16_Cmd SCSI_Invalid_Cmd
-
-//#define SCSI_FormatUnit_Cmd SCSI_Invalid_Cmd
-#define SCSI_Write6_Cmd SCSI_Invalid_Cmd
-#define SCSI_Write16_Cmd SCSI_Invalid_Cmd
-#define SCSI_Write12_Cmd SCSI_Invalid_Cmd
-#define SCSI_Read6_Cmd SCSI_Invalid_Cmd
-#define SCSI_Read12_Cmd SCSI_Invalid_Cmd
-#define SCSI_Read16_Cmd SCSI_Invalid_Cmd
-#define SCSI_Send_Diagnostic_Cmd SCSI_Invalid_Cmd
-#define SCSI_Mode_Select6_Cmd SCSI_Invalid_Cmd
-#define SCSI_Mode_Select10_Cmd SCSI_Invalid_Cmd
-#define SCSI_Verify12_Cmd SCSI_Invalid_Cmd
-#define SCSI_Verify16_Cmd SCSI_Invalid_Cmd
-
-#endif
-/********************************* END OF FILE ******************************/
-
|