From d64acac4d6f93ca60c028ebba5774b5c6ecfcf5a Mon Sep 17 00:00:00 2001 From: fredericuslaurentii <157758058+fredericuslaurentii@users.noreply.github.com> Date: Thu, 12 Dec 2024 00:06:45 +0100 Subject: Update translation_IT.json --- Translations/translation_IT.json | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 29c08e6d..7c228e6c 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -116,13 +116,13 @@ "displayText": "Modalità\nsicura" }, "TipTypeAuto": { - "displayText": "Auto\nSense" + "displayText": "Rilevaz.\nauto" }, "TipTypeT12Long": { - "displayText": "TS100\nLong" + "displayText": "TS100\nlunga" }, "TipTypeT12Short": { - "displayText": "Pine\nShort" + "displayText": "Pine\ncorta" }, "TipTypeT12PTS": { "displayText": "PTS\n200" @@ -177,7 +177,7 @@ }, "ProfilePhases": { "displayText": "Fasi modalità\nprofilo", - "description": "Imposta il numero di fasi da attuare per un profilo di riscaldamento personalizzato" + "description": "Imposta il numero di fasi da implementare per un profilo di riscaldamento personalizzato" }, "ProfilePreheatTemp": { "displayText": "Temperatura\npreriscaldamento", @@ -340,8 +340,8 @@ "description": "" }, "SolderingTipType": { - "displayText": "Soldering\nTip Type", - "description": "Select the tip type fitted" + "displayText": "Tipo di\npunta", + "description": "Seleziona il modello della punta in uso" } } } -- cgit v1.2.3 From 6e968b7110c250235a0692dc42d36057c0ebf39e Mon Sep 17 00:00:00 2001 From: fredericuslaurentii <157758058+fredericuslaurentii@users.noreply.github.com> Date: Thu, 12 Dec 2024 00:14:49 +0100 Subject: Update translation_IT.json --- Translations/translation_IT.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Translations/translation_IT.json b/Translations/translation_IT.json index 7c228e6c..79906b83 100644 --- a/Translations/translation_IT.json +++ b/Translations/translation_IT.json @@ -149,7 +149,7 @@ }, "PDNegTimeout": { "displayText": "Abilitazione\nUSB PD", - "description": "Regola il massimo tempo utile per la negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]" + "description": "Imposta il tempo di negoziazione del protocollo USB Power Delivery con alimentatori compatibili [0: disattiva; multipli di 100 ms]" }, "USBPDMode": { "displayText": "PD\nMode", -- cgit v1.2.3 From 38ebf2be69d2ca965b8aee5f760fdebbcc115a49 Mon Sep 17 00:00:00 2001 From: KT <79413138+KevinTong9@users.noreply.github.com> Date: Thu, 12 Dec 2024 14:03:59 +0800 Subject: improve zh_cn translation (#2019) * improve zh_cn translation * remove \n * Update translation_ZH_CN.json * Update translation_ZH_CN.json --------- Co-authored-by: discip <53649486+discip@users.noreply.github.com> --- Translations/translation_ZH_CN.json | 84 ++++++++++++++++++------------------- 1 file changed, 42 insertions(+), 42 deletions(-) diff --git a/Translations/translation_ZH_CN.json b/Translations/translation_ZH_CN.json index 2c09b34c..68561281 100644 --- a/Translations/translation_ZH_CN.json +++ b/Translations/translation_ZH_CN.json @@ -46,7 +46,7 @@ "message": "电压过低" }, "UndervoltageString": { - "message": "Undervoltage\n" + "message": "欠压" }, "InputVoltageString": { "message": "VIN: \n" @@ -58,16 +58,16 @@ "message": "<--- " }, "ProfilePreheatString": { - "message": "Preheat" + "message": "预热中" }, "ProfileCooldownString": { - "message": "Cooldown" + "message": "冷却" }, "DeviceFailedValidationWarning": { "message": "这支电烙铁很有可能是冒牌货！" }, "TooHotToStartProfileWarning": { - "message": "Too hot to start profile" + "message": "设备过热" } }, "characters": { @@ -107,16 +107,16 @@ }, "menuValues": { "USBPDModeDefault": { - "displayText": "Default\nMode" + "displayText": "默认模式" }, "USBPDModeNoDynamic": { "displayText": "No\nDynamic" }, "USBPDModeSafe": { - "displayText": "Safe\nMode" + "displayText": "安全模式" }, "TipTypeAuto": { - "displayText": "Auto\nSense" + "displayText": "自动检测" }, "TipTypeT12Long": { "displayText": "TS100\nLong" @@ -152,7 +152,7 @@ "description": "设定USB-PD协议交涉的超时时限；为兼容某些QC电源而设 " }, "USBPDMode": { - "displayText": "PD VPDO", + "displayText": "PD\nVPDO", "description": "启用PPS和EPR快充支持" }, "BoostTemperature": { @@ -176,60 +176,60 @@ "description": "焊接模式时，同时长按两个按键启用按键锁定 <增=只容许增热模式 | 全=完全锁定>" }, "ProfilePhases": { - "displayText": "Profile Phases", - "description": "Number of phases in profile mode" + "displayText": "配置阶数", + "description": "配置模式下的阶段数量" }, "ProfilePreheatTemp": { - "displayText": "Preheat Temp", - "description": "Preheat to this temperature at the start of profile mode" + "displayText": "预热温度", + "description": "配置开始时的目标温度" }, "ProfilePreheatSpeed": { - "displayText": "Preheat Speed", - "description": "Preheat at this rate (degrees per second)" + "displayText": "预热速度", + "description": "将以此速度进行预热 (度/秒)" }, "ProfilePhase1Temp": { - "displayText": "Phase 1 Temp", - "description": "Target temperature for the end of this phase" + "displayText": "阶段1温度", + "description": "此阶段结束时的目标温度" }, "ProfilePhase1Duration": { - "displayText": "Phase 1 Duration", - "description": "Target duration of this phase (seconds)" + "displayText": "阶段1时间", + "description": "此阶段的目标持续时间（秒）" }, "ProfilePhase2Temp": { - "displayText": "Phase 2 Temp", - "description": "" + "displayText": "阶段2温度", + "description": "此阶段结束时的目标温度" }, "ProfilePhase2Duration": { - "displayText": "Phase 2 Duration", - "description": "" + "displayText": "阶段2时间", + "description": "此阶段的目标持续时间（秒）" }, "ProfilePhase3Temp": { - "displayText": "Phase 3 Temp", - "description": "" + "displayText": "阶段3温度", + "description": "此阶段结束时的目标温度" }, "ProfilePhase3Duration": { - "displayText": "Phase 3 Duration", - "description": "" + "displayText": "阶段3时间", + "description": "此阶段的目标持续时间（秒）" }, "ProfilePhase4Temp": { - "displayText": "Phase 4 Temp", - "description": "" + "displayText": "阶段4温度", + "description": "此阶段结束时的目标温度" }, "ProfilePhase4Duration": { - "displayText": "Phase 4 Duration", - "description": "" + "displayText": "阶段4时间", + "description": "此阶段的目标持续时间（秒）" }, "ProfilePhase5Temp": { - "displayText": "Phase 5 Temp", - "description": "" + "displayText": "阶段5温度", + "description": "此阶段结束时的目标温度" }, "ProfilePhase5Duration": { - "displayText": "Phase 5 Duration", - "description": "" + "displayText": "阶段5时间", + "description": "此阶段的目标持续时间（秒）" }, "ProfileCooldownSpeed": { - "displayText": "Cooldown Speed", - "description": "Cooldown at this rate at the end of profile mode (degrees per second)" + "displayText": "冷却速度", + "description": "在配置模式结束时以此速度进行冷却（度/秒）" }, "MotionSensitivity": { "displayText": "动作灵敏度", @@ -252,8 +252,8 @@ "description": "霍尔效应传感器用作启动待机模式的灵敏度 <1=最低灵敏度 | ... | 9=最高灵敏度>" }, "HallEffSleepTimeout": { - "displayText": "HallSensor\nSleepTime", - "description": "Interval before \"sleep mode\" starts when hall effect is above threshold" + "displayText": "霍尔传感器休眠时间", + "description": "当霍尔传感器检测值高于阈值时，进入“睡眠模式”前的间隔时间" }, "TemperatureUnit": { "displayText": "温度单位", @@ -316,7 +316,7 @@ "description": "在下次重启时校正烙铁头热电偶冷接点补偿值（CJC）（温差小于5摄氏度时无需校正）" }, "VoltageCalibration": { - "displayText": "输入电压校正？", + "displayText": "输入电压校正", "description": "开始校正输入电压（VIN）<长按以退出>" }, "PowerPulsePower": { @@ -332,7 +332,7 @@ "description": "为保持电源处于唤醒状态，每次通电脉冲的时间长度 " }, "SettingsReset": { - "displayText": "全部重置？", + "displayText": "全部重置", "description": "将所有设定重置为默认值" }, "LanguageSwitch": { @@ -340,8 +340,8 @@ "description": "" }, "SolderingTipType": { - "displayText": "Soldering\nTip Type", - "description": "Select the tip type fitted" + "displayText": "焊接头类型", + "description": "选择安装合适的尖端类型" } } } -- cgit v1.2.3