From 210f1a2ff044943dfb6d8c7c1ed3b91178d6fb6b Mon Sep 17 00:00:00 2001 From: Kryštof Černý Date: Tue, 19 Apr 2022 13:07:12 +0200 Subject: Fix in Troubleshooting.md --- Documentation/Troubleshooting.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/Troubleshooting.md b/Documentation/Troubleshooting.md index 688d89c3..58b4af29 100644 --- a/Documentation/Troubleshooting.md +++ b/Documentation/Troubleshooting.md @@ -17,7 +17,7 @@ If you can open up your iron, give it a good look at all the connection points, If you are finding the tip is reading high; the first fields to check in the Debug menu are `RTip` and `CHan`. -- `RTip` is the raw tip reading in μV; at cool this should be around 700-1000 for Larger tips and ~1500 for smaller tips (TS80's) +- `RTip` is the raw tip reading in μV; at cool this should be around 700-1000 for larger tips and ~1500 for smaller tips (TS80's) - `CHan` is the temperature of the temperature sensor on the PCB in degrees Celsius \* 10. So 29 °C ambient should read as 290 ### RTip is out of spec -- cgit v1.2.3