# Version Changes ## V2.16 * Overhaul of the Timer+ADC setup with help from @sandmanRO * Overhaul of the PID with help from @sandmanRO * Settings _should_ now upgrade in place to future versions, with resets only happening to new/changed settings * Shows error if tip runaway (failed temperature sensor) is detected * USB-PD now has a timeout, to allow forcing QC3 negotiation to start faster * QC3 Voltages are now adjustable to user desired setpoint * Added a small tolerance to allow "overvoltage" on QC3 above unit specifications. * * Please note: Doing this is entirely at your own risk! * New Advanced view that is much nicer to use and a very good daily driver option from @Mel-kior * OLED brightness and contrast thanks to @alvinhochun * Scrollbar is fixed so it doesnt jump around when menus are shown/hidden * Moved to `.dfu` files from `.bin` to make flashing commands easier * Every language had translation updates I believe * Romanian language added ## V2.15 ## Feature upgrades: * MHP30 support * Multi-lingual firmware combinations now exist for Pinecil * More fine grained voltage controlled options * USB-PD improvements (version one and two) * More configuration options for power pulse * All font / character encoding has been very reworked * More translation updates than one can count * More languages 😱 ### MHP30 The MHP30 is a small reflow station from Miniware. Thanks to a massive amount of help from @g3gg0 this firmware brings the beginnings of support for this unit. Also kudo's to @Vinigas and @GoJian for helping with testing. This is not a _final_ version I'm sure, but this is a working, usable version of firmware support. Programs the same as any one Miniware unit using drag and drop. **Note: The boot logo scripts will need updates for this unit, so not supported yet.** The flood doors are now open for feature requests for this unit :) ## V2.14 - Fixing auto rotation bug in the LIS accelerometer in the TS80/TS80P - Adds support for two new accelerometers -- SC7A20 (Future Pinecil batch) #786 -- MSA301 (Newer TS80P) #761 - Add warnings if accelerometer or USB-PD IC's are not detected #752 -- Only shows for first few boots, to help catch unsupported models - Fixed cooling down blink to be sane speed #769 - Cleanup of threads and slightly faster power negotiation #790 - Updates to flashing scripts #775 - Documentation updates all over the place (and the wiki was given a cleanup)| - Updates to makefile #792 #787 - Cleanup the folder name of the source code #800 - clang-format spec setup #801 ## V2.13 - First _official_ Pinecil release - All of the wire for Pinecil releases added - Updated Translations - Delay accelerometer to help with entering sleep on startup - Dual speed PWM to help with power limit control - Improve heat up time - Adds locking mode - Improved docs all over the place - Repo rename occured TS100 -> IronOS - Hall effect sensor support added (not fitted in Pinecil but optional) - QC 20V support for Pinecil - CI upgrades for faster builds - Fixed bug with accelerometer model on Pinecil - Rework of all of the temperature curves for better accuracy ## V2.12 - Only released as pre-release - [TS80P] Improvements to the PD negotiation to handle a few more adapters cleanly - Pause on the last item in a list - Clean up the menu (removed both enables and settings, so that you can turn things off easier) - Removing the very old single line menu style. ## V2.11 - First TS80P support - Added in a USB-PD driver stack for the FUSB302 - Fixed some graphical glitches ## V2.10 - GUI polish (animations and scroll bars) - Power pulse to keep power supplies alive - Adjustable tip response gain ## V2.09 - Adjustable steps in temperature adjustment - Git hash now in build string - Adjustable language to set if US units are available or not - Some minor QC3 improvements ## V2.08 - Fixes auto start in sleep mode - Power limiters ## V2.07 - QC fixes - Cosmetic fixes for leading 0's ## V2.06 - Warning on settings reset - Temp temp re-write - Display calibration offset - Hide some leading 0's - Menu timeouts ## V2.05 - Language updates ## V2.04 - GUI updates ## V2.03 - Support for new accelerometers ## V2.02 - Adds small font ## V2.01 - Newer settings menu ## V2.00 - Complete re-write of the low layer system to use the STM32 HAL for easier development - This allowed easier setup for the new ADC auto measuring system - Better tip PWM control - Moved to FreeRTOS for scheduling - Complete re-write from blank - Added detailed screen views - Added smaller font for said screen views ## V1.17 - Added blinking cooldown display - Allowed smaller sleep timeout values - New font! - Automatic startup option ## V1.16 - Added automatic rotation support - Added power display graph ## V1.15 - Added support for a custom bootup logo to be programmed via the DFU bootloader ## V1.14 - Changed input voltage cutoff to be based on cell count rather than voltage ## V1.13 - Swapped buttons for menu to prevent accidentally changing first menu item - Added auto key repeat ## V1.12 - Increases sensitivity options to be 1\*9 with 0 off state - Fixes issue where going from COOL \*> soldering can leave screen off ## V1.11 - Boost mode - Change sensitivity options to be 1\*8 ## V1.10 - Adds help text to settings - Improves settings for the display update rate ## V1.09 - Adds display modes, for slowing down or simplifying the display ## V1.08 - Fix settings menu not showing flip display ## V1.07 - Adds shutdown time to automatically shutdown the iron after inactivity ## V1.06 - Changes H and C when the iron is heating to the minidso chevron like images ## V1.05 - Adds ability to calibrate the input voltage measurement ## V1.04 - Increased accuracy of the temperature control - Improved PID response slightly - Allows temperature offset calibration - Nicer idle screen ## V1.03 - Improved Button handling - Ability to set motion sensitivity - DC voltmeter page shows input voltage ## V1.02 - Adds hold both buttons on IDLE to access the therometer mode - Changes the exit soldering mode to be holding both buttons (Like original firmware)