{
  "languageCode": "NL",
  "languageLocalName": "Nederlands",
  "fonts": ["ascii_basic", "latin_extended"],
  "tempUnitFahrenheit": false,
  "messages": {
    "SettingsCalibrationWarning": "Zorg ervoor dat te punt op kamertemperatuur is voor je verder gaat!",
    "SettingsResetWarning": "Weet je zeker dat je de fabrieksinstellingen terug wil zetten?",
    "UVLOWarningString": "DC Laag",
    "UndervoltageString": "Onderspanning",
    "InputVoltageString": "Input V: ",
    "SleepingSimpleString": "Zzzz",
    "SleepingAdvancedString": "Slaapstand...",
    "SleepingTipAdvancedString": "Punt:",
    "OffString": "Uit"
  },
  "messagesWarn": {
    "ResetOKMessage": "Reset OK",
    "SettingsResetMessage": ["Instellingen", "zijn gereset!"],
    "NoAccelerometerMessage": ["No accelerometer", "detected!"],
    "NoPowerDeliveryMessage": ["No USB-PD IC", "detected!"],
    "LockingKeysString": " GEBLOKKEERD",
    "UnlockingKeysString": "GEDEBLOKKEERD",
    "WarningKeysLockedString": "!GEBLOKKEERD!",
    "WarningThermalRunaway": ["Thermal", "Runaway"]
  },
  "characters": {
    "SettingRightChar": "R",
    "SettingLeftChar": "L",
    "SettingAutoChar": "A",
    "SettingOffChar": "O",
    "SettingSlowChar": "S",
    "SettingMediumChar": "M",
    "SettingFastChar": "F",
    "SettingStartNoneChar": "F",
    "SettingStartSolderingChar": "T",
    "SettingStartSleepChar": "S",
    "SettingStartSleepOffChar": "K",
    "SettingSensitivityOff": "O",
    "SettingSensitivityLow": "L",
    "SettingSensitivityMedium": "M",
    "SettingSensitivityHigh": "H",
    "SettingLockDisableChar": "U",
    "SettingLockBoostChar": "B",
    "SettingLockFullChar": "V"
  },
  "menuGroups": {
    "PowerMenu": {
      "text2": ["Power", "settings"],
      "desc": "Power settings"
    },
    "SolderingMenu": {
      "text2": ["Soldeer", "Instellingen"],
      "desc": "Soldeer instellingen"
    },
    "PowerSavingMenu": {
      "text2": ["Slaap", "Modes"],
      "desc": "Stroom besparings instellingen"
    },
    "UIMenu": {
      "text2": ["Gebruikers-", "interface"],
      "desc": "Gebruikers-interface instellingen"
    },
    "AdvancedMenu": {
      "text2": ["Geavanceerde", "Instellingen"],
      "desc": "Geavanceerde Instellingen"
    }
  },
  "menuOptions": {
    "DCInCutoff": {
      "text2": ["Spannings-", "bron"],
      "desc": "Spanningsbron. Stelt drempelspanning in. (DC 10V) (S 3.3V per cel)"
    },
    "SleepTemperature": {
      "text2": ["Slaap", "temp"],
      "desc": "Temperatuur in slaapstand"
    },
    "SleepTimeout": {
      "text2": ["Slaap", "time-out"],
      "desc": "Slaap time-out (Minuten | Seconden)"
    },
    "ShutdownTimeout": {
      "text2": ["Uitschakel", "time-out"],
      "desc": "Automatisch afsluiten time-out (Minuten)"
    },
    "MotionSensitivity": {
      "text2": ["Bewegings-", "gevoeligheid"],
      "desc": "Bewegingsgevoeligheid (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
    },
    "TemperatureUnit": {
      "text2": ["Temperatuur", "eenheid"],
      "desc": "Temperatuureenheid (C=Celsius | F=Fahrenheit)"
    },
    "AdvancedIdle": {
      "text2": ["Gedetailleerd", "startscherm"],
      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het startscherm."
    },
    "DisplayRotation": {
      "text2": ["Scherm-", "oriëntatie"],
      "desc": "Schermoriëntatie (R=Rechtshandig | L=Linkshandig | A=Automatisch)"
    },
    "BoostTemperature": {
      "text2": ["Boost", "temp"],
      "desc": "Temperatuur in boostmode"
    },
    "AutoStart": {
      "text2": ["Auto", "start"],
      "desc": "Breng de soldeerbout direct op temperatuur bij het opstarten. (F=Uit | T=Soldeertemperatuur | S=Slaapstand-temperatuur | K=Slaapstand kamertemperatuur)"
    },
    "CooldownBlink": {
      "text2": ["Afkoel", "flikker"],
      "desc": "Temperatuur laten flikkeren in het hoofdmenu als de soldeerpunt aan het afkoelen is."
    },
    "TemperatureCalibration": {
      "text2": ["Calibreer", "temperatuur?"],
      "desc": "Temperatuursafwijking van de soldeerpunt calibreren."
    },
    "SettingsReset": {
      "text2": ["Instellingen", "resetten?"],
      "desc": "Alle instellingen terugzetten."
    },
    "VoltageCalibration": {
      "text2": ["Calibreer", "input-voltage?"],
      "desc": "VIN Calibreren. (druk lang om te sluiten)."
    },
    "AdvancedSoldering": {
      "text2": ["Gedetailleerd", "soldeerscherm"],
      "desc": "Gedetailleerde informatie weergeven in een kleiner lettertype op het soldeerscherm."
    },
    "ScrollingSpeed": {
      "text2": ["Scroll", "snelheid"],
      "desc": "Snelheid waarmee de tekst scrolt."
    },
    "QCMaxVoltage": {
      "text2": ["Power", "Wattage"],
      "desc": "Wattage van de gebruikte voeding"
    },
    "PDNegTimeout": {
      "text2": ["PD", "timeout"],
      "desc": "PD negotiation timeout in 100ms steps for compatibility with some QC chargers (0: disabled)"
    },
    "PowerLimit": {
      "text2": ["Vermogen", "limiet"],
      "desc": "Maximaal vermogen (Watts)"
    },
    "ReverseButtonTempChange": {
      "text2": ["Draai", "+ - knoppen om"],
      "desc": "Keer de +- knoppen om de termperatuur van de punt te regelen om."
    },
    "TempChangeShortStep": {
      "text2": ["Temp veranderen", "kort"],
      "desc": "Temperatuur verandering bij kort drukken"
    },
    "TempChangeLongStep": {
      "text2": ["Temp veranderen", "lang"],
      "desc": "Temperatuur verandering bij lang drukken"
    },
    "PowerPulsePower": {
      "text2": ["Vermogen", "Puls W"],
      "desc": "Vermogen van puls om soldeerbout aan te houden"
    },
    "HallEffSensitivity": {
      "text2": ["Hall sensor", "sensitivity"],
      "desc": "Sensitivity of the Hall effect sensor to detect sleep (0=uit | 1=minst gevoelig | ... | 9=meest gevoelig)"
    },
    "LockingMode": {
      "text2": ["Blokkeer", "knoppen"],
      "desc": "Tijdens solderen lang op beide knoppen drukken, blokkeert ze. (U=Uit | B=Alleen boost | V=Volledig blokkeren)"
    },
    "MinVolCell": {
      "text2": ["Minimum", "voltage"],
      "desc": "Minimum allowed voltage per cell (3S: 3 - 3.7V | 4-6S: 2.4 - 3.7V)"
    },
    "AnimLoop": {
      "text2": ["Anim.", "loop"],
      "desc": "Loop icon animations in main menu"
    },
    "AnimSpeed": {
      "text2": ["Anim.", "speed"],
      "desc": "Pace of icon animations in menu (O=off | S=slow | M=medium | F=fast)"
    },
    "PowerPulseWait": {
      "text2": ["Power pulse", "delay"],
      "desc": "Delay before keep-awake-pulse is triggered (x 2.5s)"
    },
    "PowerPulseDuration": {
      "text2": ["Power pulse", "duration"],
      "desc": "Keep-awake-pulse duration (x 250ms)"
    },
    "LanguageSwitch": {
      "text2": ["Spraak :", " NL  Nederlands"],
      "desc": ""
    },
    "Brightness": {
      "text2": ["Screen", "brightness"],
      "desc": "Adjust the brightness of the OLED screen"
    },
    "ColourInversion": {
      "text2": ["Invert", "screen"],
      "desc": "Invert the colours of the OLED screen"
    },
    "LOGOTime": {
      "text2": ["Boot logo", "duration"],
      "desc": "Sets the duration for the boot logo (s=seconds)"
    }
  }
}