1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
|
/*
* Strings.c
*
* Created on: 5Aug.,2017
* Author: Ben V. Brown
*/
#include "Strings.h"
#define LANG_EN
#ifdef LANG_EN
const char* SettingsLongNames[13] =
{
/*These are all the help text for all the settings.*/
/*All must start with 6 spaces so they come on screen nicely.*/
" Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
" Sleep Temperature <C>", " Sleep Timeout <Minutes>",
" Shutdown Timeout <Minutes>",
" Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
" Temperature Unit", " Temperature Rounding Amount",
" Temperature Display Update Rate",
" Display Orientation <A. Automatic L. Left Handed R. Right Handed>",
" Enable front key boost 450C mode when soldering",
" Temperature when in boost mode",
" Changes the arrows to a power display when soldering",
" Automatically starts the iron into soldering on power up." };
const char* TempCalStatus[3] = { "CAL TEMP", "CAL OK ", "CAL FAIL" }; //All fixed 8 chars
const char* UVLOWarningString = "LOW VOLT"; //Fixed width 8 chars
const char* CoolingPromptString = "COOL "; //Fixed width 5 chars
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingFastChar = 'F';
const char SettingMediumChar = 'F';
const char SettingSlowChar = 'F';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
#ifdef LANG_ES
const char* SettingsLongNames[13] =
{
/*These are all the help text for all the settings.*/
/*All must start with 6 spaces so they come on screen nicely.*/
" Fuente de energia. Ajusta el limite inferior de voltaje. <DC 10V> <S 3.3V por celda>",
" Temperatura en reposo. <C>", " Tiempo hasta activar reposo. <Minutos>",
" Tiempo hasta apagado. <Minutos>",
" Sensibilidad del movimiento. <0.Apagado 1.El menos sensible 9.El mas sensible>",
" Unidad de temperatura.", " Cantidad de redondeo de la temperatura.",
" Tasa de actualizaci�n de la temperatura.",
" Orientacion de la pantalla <A. Automatico L. Mano izquierda R. Mano derecha>",
" Activar el boton <Boost> en modo soldadura.",
" Temperatura en modo <Boost>.",
" Cambiar las flechas en pantalla por indicador de potencia en modo soldadura.",
" Iniciar directamente modo soldadura en el encendido."};
const char* TempCalStatus[3] = {"CAL TEMP", "CAL OK ", "CAL FAIL"}; //All fixed 8 chars
const char* UVLOWarningString = "LOW VOLT";//Fixed width 8 chars
const char* CoolingPromptString = "COOL ";//Fixed width 5 chars
const char SettingTrueChar = 'T';
const char SettingFalseChar = 'F';
const char SettingFastChar = 'F';
const char SettingMediumChar = 'F';
const char SettingSlowChar = 'F';
const char SettingRightChar = 'R';
const char SettingLeftChar = 'L';
const char SettingAutoChar = 'A';
const char SettingTempCChar = 'C';
const char SettingTempFChar = 'F';
#endif
const char* SettingsShortNames[13] = { "PWRSC ", "STMP ", "SLTME ", "SHTME ",
"MSENSE ", "TMPUNT ", "TMPRND ", "TMPSPD ", "DSPROT ", "BOOST ",
"BTMP ", "PWRDSP ", "ASTART " };
|
