| Age | Commit message (Collapse) | Author |
|---|
|
* added new modular ca providers to caddy tls HttpTransport
* reverse-proxy, httptransport: added tests and caddyfile support for ca module
---------
Co-authored-by: Mohammed Al Sahaf <[email protected]>
|
|
|
|
* reverseproxy: active health check allows configurable health_passes and health_fails
* Need to reset counters after recovery
* rename methods to be more clear that these are coming from active health checks
* do not export methods
|
|
Co-authored-by: WeidiDeng <[email protected]>
|
|
|
|
|
|
* reverseproxy: Add more debug logs
This makes debug logging very noisy when reverse proxying, but I guess
that's the point.
This has shown to be useful in troubleshooting infrastructure issues.
* Update modules/caddyhttp/reverseproxy/streaming.go
Co-authored-by: Francis Lavoie <[email protected]>
* Update modules/caddyhttp/reverseproxy/streaming.go
Co-authored-by: Francis Lavoie <[email protected]>
* Add opt-in `trace_logs` option
* Rename to VerboseLogs
---------
Co-authored-by: Francis Lavoie <[email protected]>
|
|
|
|
buffers (#5828)
|
|
Co-authored-by: Mohammed Al Sahaf <[email protected]>
Co-authored-by: Francis Lavoie <[email protected]>
|
|
* use gofmput to format code
* use gci to format imports
* reconfigure gci
* linter autofixes
* rearrange imports a little
* export GOOS=windows golangci-lint run ./... --fix
|
|
|
|
replaceble parts (#5695)
* reverseproxy: do not parse upstream address too early if it contains replaceble parts
* remove unused method
* cleanup
* accommodate partially replaceable port
|
|
allows AUpstreams to be instantiated externally
|
|
* reverseproxy: WIP streaming timeouts
* More verbose logging by using the child logger
* reverseproxy: Implement streaming timeouts
* reverseproxy: Refactor cleanup
* reverseproxy: Avoid **time.Timer
---------
Co-authored-by: Francis Lavoie <[email protected]>
|
|
(#5494)
* reverseproxy: Expand port ranges to multiple upstreams in CLI + Caddyfile
* Add clarifying comment
|
|
|
|
|
|
listener wrapper (#5424)
Co-authored-by: WeidiDeng <[email protected]>
Co-authored-by: Francis Lavoie <[email protected]>
|
|
Co-authored-by: Francis Lavoie <[email protected]>
|
|
* reverseproxy: Don't buffer chunked requests (fix #5366)
Mostly reverts 845bc4d50b437995d574819850206e4b3db4040d (#5289)
Adds warning for unsafe config.
Deprecates unsafe properties in favor of simpler, safer designed ones.
* Update modules/caddyhttp/reverseproxy/caddyfile.go
Co-authored-by: Y.Horie <[email protected]>
* Update modules/caddyhttp/reverseproxy/reverseproxy.go
Co-authored-by: Y.Horie <[email protected]>
* Update modules/caddyhttp/reverseproxy/reverseproxy.go
Co-authored-by: Y.Horie <[email protected]>
* Remove unused code
---------
Co-authored-by: Y.Horie <[email protected]>
|
|
|
|
|
|
This allows users to, for example, get upstreams from multiple SRV
endpoints in order (such as primary and secondary clusters).
Also, gofmt went to town on the comments, sigh
|
|
|
|
* reverseproxy: Implement retry count, alternative to try_duration
* Add Caddyfile support for `retry_match`
* Refactor to deduplicate matcher parsing logic
* Fix lint
|
|
|
|
* Make reverse proxy TLS server name replaceable for SNI upstreams.
* Reverted previous TLS server name replacement, and implemented thread safe version.
* Move TLS servername replacement into it's own function
* Moved SNI servername replacement into httptransport.
* Solve issue when dynamic upstreams use wrong protocol upstream.
* Revert previous commit.
Old commit was: Solve issue when dynamic upstreams use wrong protocol upstream.
Id: 3c9806ccb63e66bdcac8e1ed4520c9d135cb011d
* Added SkipTLSPorts option to http transport.
* Fix typo in test config file.
* Rename config option as suggested by Matt
Co-authored-by: Matt Holt <[email protected]>
* Update code to match renamed config option.
* Fix typo in config option name.
* Fix another typo that I missed.
* Tests not completing because of apparent wrong ordering of options.
Co-authored-by: Matt Holt <[email protected]>
|
|
* Add renegotiation option in reverseproxy tls client
* Update modules/caddyhttp/reverseproxy/httptransport.go
Co-authored-by: Matt Holt <[email protected]>
|
|
|
|
|
|
|
|
|
|
routes (#4391)
* reverseproxy: New `copy_response` handler for `handle_response` routes
Followup to #4298 and #4388.
This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream.
Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch.
To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream.
Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works.
Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response.
* Delete the "Content-Length" header if we aren't copying
Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl:
```
curl: (18) transfer closed with 18 bytes remaining to read
```
To replicate:
```
{
admin off
debug
}
:8881 {
reverse_proxy 127.0.0.1:8882 {
@200 status 200
handle_response @200 {
header Foo bar
}
}
}
:8882 {
header Content-Type application/json
respond `{"hello": "world"}` 200
}
```
* Implement `copy_response_headers`, with include/exclude list support
* Apply suggestions from code review
Co-authored-by: Matt Holt <[email protected]>
|
|
* reverseproxy: Begin refactor to enable dynamic upstreams
Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU
* Implement SRV and A/AAA upstream sources
Also get upstreams at every retry loop iteration instead of just once
before the loop. See #4442.
* Minor tweaks from review
* Limit size of upstreams caches
* Add doc notes deprecating LookupSRV
* Provision dynamic upstreams
Still WIP, preparing to preserve health checker functionality
* Rejigger health checks
Move active health check results into handler-specific Upstreams.
Improve documentation regarding health checks and upstreams.
* Deprecation notice
* Add Caddyfile support, use `caddy.Duration`
* Interface guards
* Implement custom resolvers, add resolvers to http transport Caddyfile
* SRV: fix Caddyfile `name` inline arg, remove proto condition
* Use pointer receiver
* Add debug logs
Co-authored-by: Francis Lavoie <[email protected]>
|
|
|
|
|
|
|
|
Fixes #4481
|
|
* reverseproxy: Adjust defaults, document defaults
Related to some of the issues in https://github.com/caddyserver/caddy/issues/4245, a complaint about the proxy transport defaults not being properly documented in https://caddy.community/t/default-values-for-directives/14254/6.
- Dug into the stdlib to find the actual defaults for some of the timeouts and buffer limits, documenting them in godoc so the JSON docs get them next release.
- Moved the keep-alive and dial-timeout defaults from `reverseproxy.go` to `httptransport.go`. It doesn't make sense to set defaults in the proxy, because then any time the transport is configured with non-defaults, the keep-alive and dial-timeout defaults are lost!
- Sped up the dial timeout from 10s to 3s, in practice it rarely makes sense to wait a whole 10s for dialing. A shorter timeout helps a lot with the load balancer retries, so using something lower helps with user experience.
* reverseproxy: Make keepalive interval configurable via Caddyfile
* fastcgi: DialTimeout default for fastcgi transport too
|
|
|
|
Also split the Caddyfile subdirective keepalive_idle_conns into two properties so the conns and conns_per_host can be set separately.
This is technically a breaking change, but probably anyone who this breaks already had a broken config anyway, and silently fixing it won't help them fix their configs.
|
|
* reverseproxy: Add `handle_response` blocks to `reverse_proxy` (#3710)
* reverseproxy: complete handle_response test
* reverseproxy: Change handle_response matchers to use named matchers
reverseproxy: Add support for changing status code
* fastcgi: Remove obsolete TODO
We already have d.Err("transport already specified") in the reverse_proxy parsing code which covers this case
* reverseproxy: Fix support for "4xx" type status codes
* Apply suggestions from code review
Co-authored-by: Matt Holt <[email protected]>
* caddyhttp: Reorganize response matchers
* reverseproxy: Reintroduce caddyfile.Unmarshaler
* reverseproxy: Add comment mentioning Finalize should be called
Co-authored-by: Maxime Soulé <[email protected]>
Co-authored-by: Matt Holt <[email protected]>
|
|
(#4050)
* reverseproxy: Implement health_uri, replaces health_path, supports query
Also fixes a bug with `health_status` Caddyfile parsing , it would always only take the first character of the status code even if it didn't end with "xx".
* reverseproxy: Rename to URI, named logger, warn in Provision (for JSON)
|
|
|
|
Proxy response bodies can now be buffered, and the size of the request body and
response body buffer can be limited. Any remaining content that doesn't fit in the
buffer will remain on the wire until it can be read; i.e. bodies are not truncated,
even if the buffer is not big enough.
This fulfills a customer requirement. This was made possible by their sponsorship!
|
|
Eliminates a fair amount of repeated code
|
|
* reverse_proxy: 1.health check headers can be set through Caddyfile using health_headers directive; 2.health check header host can be set properly
* reverse_proxy:
replace example with syntax definition
inline health_headers directive parse function
* bugfix: change caddyfile_adapt testcase file from space to tab
* reverseproxy: modify health_header value document as optional and add more test cases
|
|
* caddyfile: Introduce basic linting and fmt check
This will help encourage people to keep their Caddyfiles tidy.
* Remove unrelated tests
I am not sure that testing the output of warnings here is quite the
right idea; these tests are just for syntax and parsing success.
|
|
* reverseproxy: Add Caddyfile scheme shorthand for h2c
* reverseproxy: Use parentheses for condition
Co-authored-by: Matt Holt <[email protected]>
Co-authored-by: Matt Holt <[email protected]>
|
