Xbyak 5.31 ; JIT assembler for x86(IA32), x64(AMD64, x86-64) by C++ ============= Abstract ------------- This is a header file which enables dynamically to assemble x86(IA32), x64(AMD64, x86-64) mnemonic. Feature ------------- header file only you can use Xbyak's functions at once if xbyak.h is included. ### Supported Instructions Sets MMX/MMX2/SSE/SSE2/SSE3/SSSE3/SSE4/FPU(*partial*)/AVX/AVX2/FMA/VEX-encoded GPR/AVX-512 ### Supported OS * Windows Xp, Vista, Windows 7(32bit, 64bit) * Linux(32bit, 64bit) * Intel Mac ready ### Supported Compilers * Visual Studio C++ VC2008 Pro, VC2010, VC2012 * gcc 4.7 * clang 3.3 * cygwin gcc 4.5.3 * icc 7.2 >Note: Xbyak uses and(), or(), xor(), not() functions, so "-fno-operator-names" option is required on gcc. Or define XBYAK_NO_OP_NAMES and use and_(), or_(), xor_(), not_() instead of them. and_(), or_(), xor_(), not_() are always available. Install ------------- The following files are necessary. Please add the path to your compile directories. * xbyak.h * xbyak_mnemonic.h Linux: make install These files are copied into /usr/local/include/xbyak New Feature ------------- Add support for AVX-512 instruction set. Syntax ------------- Make Xbyak::CodeGenerator and make the class method and get the function pointer by calling cgetCode() and casting the return value. NASM Xbyak mov eax, ebx --> mov(eax, ebx); inc ecx inc(ecx); ret --> ret(); ### Addressing (ptr|dword|word|byte) [base + index * (1|2|4|8) + displacement] [rip + 32bit disp] ; x64 only NASM Xbyak mov eax, [ebx+ecx] --> mov (eax, ptr[ebx+ecx]); test byte [esp], 4 --> test (byte [esp], 4); How to use Selector(Segment Register) >Note: Segment class is not derived from Operand. ``` mov eax, [fs:eax] --> putSeg(fs); mov(eax, ptr [eax]); mov ax, cs --> mov(ax, cs); ``` >you can use ptr for almost memory access unless you specify the size of memory. >dword, word and byte are member variables, then don't use dword as unsigned int, for example. ### AVX vaddps(xmm1, xmm2, xmm3); // xmm1 <- xmm2 + xmm3 vaddps(xmm2, xmm3, ptr [rax]); // use ptr to access memory vgatherdpd(xmm1, ptr [ebp+123+xmm2*4], xmm3); *Remark* The omitted destination syntax as the following ss disabled. ``` vaddps(xmm2, xmm3); // xmm2 <- xmm2 + xmm3 ``` define `XBYAK_ENABLE_OMITTED_OPERAND` if you use it for backward compatibility. But the newer version will not support it. ### AVX-512 ``` vaddpd zmm2, zmm5, zmm30 --> vaddpd(zmm2, zmm5, zmm30); vaddpd xmm30, xmm20, [rax] --> vaddpd(xmm30, xmm20, ptr [rax]); vaddps xmm30, xmm20, [rax] --> vaddps(xmm30, xmm20, ptr [rax]); vaddpd zmm2{k5}, zmm4, zmm2 --> vaddpd(zmm2 | k5, zmm4, zmm2); vaddpd zmm2{k5}{z}, zmm4, zmm2 --> vaddpd(zmm2 | k5 | T_z, zmm4, zmm2); vaddpd zmm2{k5}{z}, zmm4, zmm2,{rd-sae} --> vaddpd(zmm2 | k5 | T_z, zmm4, zmm2 | T_rd_sae); vaddpd(zmm2 | k5 | T_z | T_rd_sae, zmm4, zmm2); // the position of `|` is arbitrary. vcmppd k4{k3}, zmm1, zmm2, {sae}, 5 --> vcmppd(k4 | k3, zmm1, zmm2 | T_sae, 5); vaddpd xmm1, xmm2, [rax+256] --> vaddpd(xmm1, xmm2, ptr [rax+256]); vaddpd xmm1, xmm2, [rax+256]{1to2} --> vaddpd(xmm1, xmm2, ptr_b [rax+256]); vaddpd ymm1, ymm2, [rax+256]{1to4} --> vaddpd(ymm1, ymm2, ptr_b [rax+256]); vaddpd zmm1, zmm2, [rax+256]{1to8} --> vaddpd(zmm1, zmm2, ptr_b [rax+256]); vaddps zmm1, zmm2, [rax+rcx*8+8]{1to16} --> vaddps(zmm1, zmm2, ptr_b [rax+rcx*8+8]); vmovsd [rax]{k1}, xmm4 --> vmovsd(ptr [rax] | k1, xmm4); vcvtpd2dq xmm16, oword [eax+33] --> vcvtpd2dq(xmm16, xword [eax+33]); // use xword for m128 instead of oword vcvtpd2dq(xmm16, ptr [eax+33]); // default xword vcvtpd2dq xmm21, [eax+32]{1to2} --> vcvtpd2dq(xmm21, ptr_b [eax+32]); vcvtpd2dq xmm0, yword [eax+33] --> vcvtpd2dq(xmm0, yword [eax+33]); // use yword for m256 vcvtpd2dq xmm19, [eax+32]{1to4} --> vcvtpd2dq(xmm19, yword_b [eax+32]); // use yword_b to broadcast vfpclassps k5{k3}, zword [rax+64], 5 --> vfpclassps(k5|k3, zword [rax+64], 5); // specify m512 vfpclasspd k5{k3}, [rax+64]{1to2}, 5 --> vfpclasspd(k5|k3, xword_b [rax+64], 5); // broadcast 64-bit to 128-bit vfpclassps k5{k3}, [rax+64]{1to4}, 5 --> vfpclassps(k5|k3, xword_b [rax+64], 5); // broadcast 32-bit to 128-bit ``` Remark * k1, ..., k7 are new opmask registers. * use `| T_z`, `| T_sae`, `| T_rn_sae`, `| T_rd_sae`, `| T_ru_sae`, `| T_rz_sae` instead of `,{z}`, `,{sae}`, `,{rn-sae}`, `,{rd-sae}`, `,{ru-sae}`, `,{rz-sae}` respectively. * `k4 | k3` is different from `k3 | k4`. * use `ptr_b` for broadcast `{1toX}`. X is automatically determined. * specify xword/yword/zword(_b) for m128/m256/m512 if necessary. ### Label L("L1"); jmp ("L1"); jmp ("L2"); ... a few mnemonics(8-bit displacement jmp) ... L("L2"); jmp ("L3", T_NEAR); ... a lot of mnemonics(32-bit displacement jmp) ... L("L3"); >Call hasUndefinedLabel() to verify your code has no undefined label. > you can use a label for immediate value of mov like as mov (eax, "L2"); #### 1. support @@, @f, @b like MASM L("@@"); // jmp("@b"); // jmp to jmp("@f"); // jmp to L("@@"); // jmp("@b"); // jmp to mov(eax, "@b"); jmp(eax); // jmp to #### 2. localization of label by calling inLocalLabel(), outLocallabel(). labels begining of period between inLocalLabel() and outLocalLabel() are dealed with local label. inLocalLabel() and outLocalLabel() can be nested. void func1() { inLocalLabel(); L(".lp"); // ; local label ... jmp(".lp"); // jmpt to L("aaa"); // global label outLocalLabel(); } void func2() { inLocalLabel(); L(".lp"); // ; local label func1(); jmp(".lp"); // jmp to inLocalLabel(); } ### Label class L() and jxx() functions support a new Label class. Label label1, label2; L(label1); ... jmp(label1); ... jmp(label2); ... L(label2); Moreover, assignL(dstLabel, srcLabel) method binds dstLabel with srcLabel. Label label1, label2; L(label1); ... jmp(label2); ... assignL(label2, label1); // label2 <= label1 The above jmp opecode jumps label1. * Restriction: * srcLabel must be used in L(). * dstLabel must not be used in L(). ### Rip ``` Label label; mov(eax, ptr [rip + label]); // eax = 4 ... L(label); dd(4); ``` ``` int x; ... mov(eax, ptr[rip + &x]); // throw exception if the difference between &x and current position is larger than 2GiB ``` ### Code size The default max code size is 4096 bytes. Please set it in constructor of CodeGenerator() if you want to use large size. class Quantize : public Xbyak::CodeGenerator { public: Quantize() : CodeGenerator(8192) { } ... }; ### use user allocated memory You can make jit code on prepaired memory. class Sample : public Xbyak::CodeGenerator { public: Sample(void *userPtr, size_t size) : Xbyak::CodeGenerator(size, userPtr) { ... } }; const size_t codeSize = 1024; uint8 buf[codeSize + 16]; // get 16-byte aligned address uint8 *p = Xbyak::CodeArray::getAlignedAddress(buf); // append executable attribute to the memory Xbyak::CodeArray::protect(p, codeSize, true); // construct your jit code on the memory Sample s(p, codeSize); >See *sample/test0.cpp* AutoGrow ------------- Under `AutoGrow` mode, Xbyak extends memory automatically if necessary. Call ready() before calling getCode() to calc address of jmp. ``` struct Code : Xbyak::CodeGenerator { Code() : Xbyak::CodeGenerator(, Xbyak::AutoGrow) { ... } }; Code c; c.ready(); // Don't forget to call this function ``` >Don't use the address returned by getCurr() before calling ready(). >It may be invalid address. >RESTRICTION : rip addressing is not supported in AutoGrow Macro ------------- * **XBYAK32** is defined on 32bit. * **XBYAK64** is defined on 64bit. * **XBYAK64_WIN** is defined on 64bit Windows(VC) * **XBYAK64_GCC** is defined on 64bit gcc, cygwin * define **XBYAK_NO_OP_NAMES** on gcc without `-fno-operator-names` * define **XBYAK_ENABLE_OMITTED_OPERAND** if you use omitted destination such as `vaddps(xmm2, xmm3);`(duplicated in the future) Sample ------------- * test0.cpp ; tiny sample of Xbyak(x86, x64) * quantize.cpp ; JIT optimized quantization by fast division(x86 only) * calc.cpp ; assemble and estimate a given polynomial(x86, x64) * bf.cpp ; JIT brainfuck(x86, x64) License ------------- modified new BSD License http://opensource.org/licenses/BSD-3-Clause The files under test/cybozu/ are copied from cybozulib(https://github.com/herumi/cybozulib/), which is licensed by BSD-3-Clause and are used for only tests. The header files under xbyak/ are independent of cybozulib. History ------------- * 2016/Nov/27 ver 5.31 rename AVX512_4VNNI to AVX512_4VNNIW * 2016/Nov/27 ver 5.30 add AVX512_4VNNI, AVX512_4FMAPS instructions(thanks to rsdubtso) * 2016/Nov/26 ver 5.20 add detection of AVX512_4VNNI and AVX512_4FMAPS(thanks to rsdubtso) * 2016/Nov/20 ver 5.11 lost vptest for ymm(thanks to gregory38) * 2016/Nov/20 ver 5.10 add addressing [rip+&var] * 2016/Sep/29 ver 5.03 fix detection ERR_INVALID_OPMASK_WITH_MEMORY(thanks to PVS-Studio) * 2016/Aug/15 ver 5.02 xbyak does not include xbyak_bin2hex.h * 2016/Aug/15 ver 5.011 fix detection of version of gcc 5.4 * 2016/Aug/03 ver 5.01 disable omitted operand * 2016/Jun/24 ver 5.00 support avx-512 instruction set * 2016/Jun/13 avx-512 add mask instructions * 2016/May/05 ver 4.91 add detection of AVX-512 to Xbyak::util::Cpu * 2016/Mar/14 ver 4.901 comment to ready() function(thanks to skmp) * 2016/Feb/04 ver 4.90 add jcc(const void *addr); * 2016/Jan/30 ver 4.89 vpblendvb supports ymm reg(thanks to John Funnell) * 2016/Jan/24 ver 4.88 lea, cmov supports 16-bit register(thanks to whyisthisfieldhere) * 2015/Oct/05 ver 4.87 support segment selectors * 2015/Aug/18 ver 4.86 fix [rip + label] addressing with immediate value(thanks to whyisthisfieldhere) * 2015/Aug/10 ver 4.85 Address::operator==() is not correct(thanks to inolen) * 2015/Jun/22 ver 4.84 call() support variadic template if available(thanks to randomstuff) * 2015/Jun/16 ver 4.83 support movbe(thanks to benvanik) * 2015/May/24 ver 4.82 support detection of F16C * 2015/Apr/25 ver 4.81 fix the condition to throw exception for setSize(thanks to whyisthisfieldhere) * 2015/Apr/22 ver 4.80 rip supports label(thanks to whyisthisfieldhere) * 2015/Jar/28 ver 4.71 support adcx, adox, cmpxchg, rdseed, stac * 2014/Oct/14 ver 4.70 support MmapAllocator * 2014/Jun/13 ver 4.62 disable warning of VC2014 * 2014/May/30 ver 4.61 support bt, bts, btr, btc * 2014/May/28 ver 4.60 support vcvtph2ps, vcvtps2ph * 2014/Apr/11 ver 4.52 add detection of rdrand * 2014/Mar/25 ver 4.51 remove state information of unreferenced labels * 2014/Mar/16 ver 4.50 support new Label * 2014/Mar/05 ver 4.40 fix wrong detection of BMI/enhanced rep on VirtualBox * 2013/Dec/03 ver 4.30 support Reg::cvt8(), cvt16(), cvt32(), cvt64() * 2013/Oct/16 ver 4.21 label support std::string * 2013/Jul/30 ver 4.20 [break backward compatibility] split Reg32e class into RegExp(base+index*scale+disp) and Reg32e(means Reg32 or Reg64) * 2013/Jul/04 ver 4.10 [break backward compatibility] change the type of Xbyak::Error from enum to a class * 2013/Jun/21 ver 4.02 add putL(LABEL) function to put the address of the label * 2013/Jun/21 ver 4.01 vpsllw, vpslld, vpsllq, vpsraw, vpsrad, vpsrlw, vpsrld, vpsrlq support (ymm, ymm, xmm). support vpbroadcastb, vpbroadcastw, vpbroadcastd, vpbroadcastq(thanks to Gabest). * 2013/May/30 ver 4.00 support AVX2, VEX-encoded GPR-instructions * 2013/Mar/27 ver 3.80 support mov(reg, "label"); * 2013/Mar/13 ver 3.76 add cqo(), jcxz(), jecxz(), jrcxz() * 2013/Jan/15 ver 3.75 add setSize() to modify generated code * 2013/Jan/12 ver 3.74 add CodeGenerator::reset() ; add Allocator::useProtect() * 2013/Jan/06 ver 3.73 use unordered_map if possible * 2012/Dec/04 ver 3.72 eax, ebx, ... are member variables of CodeGenerator(revert), Xbyak::util::eax, ... are static const. * 2012/Nov/17 ver 3.71 and_(), or_(), xor_(), not_() are available if XBYAK_NO_OP_NAMES is not defined. * 2012/Nov/17 change eax, ebx, ptr and so on in CodeGenerator as static member and alias of them are defined in Xbyak::util. * 2012/Nov/09 ver 3.70 XBYAK_NO_OP_NAMES macro is added to use and_() instead of and() (thanks to Mattias) * 2012/Nov/01 ver 3.62 add fwait/fnwait/finit/fninit * 2012/Nov/01 ver 3.61 add fldcw/fstcw * 2012/May/03 ver 3.60 change interface of Allocator * 2012/Mar/23 ver 3.51 fix userPtr mode * 2012/Mar/19 ver 3.50 support AutoGrow mode * 2011/Nov/09 ver 3.05 fix bit property of rip addresing / support movsxd * 2011/Aug/15 ver 3.04 fix dealing with imm8 such as add(dword [ebp-8], 0xda); (thanks to lolcat) * 2011/Jun/16 ver 3.03 fix __GNUC_PREREQ macro for Mac gcc(thanks to t_teruya) * 2011/Apr/28 ver 3.02 do not use xgetbv on Mac gcc * 2011/May/24 ver 3.01 fix typo of OSXSAVE * 2011/May/23 ver 3.00 add vcmpeqps and so on * 2011/Feb/16 ver 2.994 beta add vmovq for 32-bit mode(I forgot it) * 2011/Feb/16 ver 2.993 beta remove cvtReg to avoid thread unsafe * 2011/Feb/10 ver 2.992 beta support one argument syntax for fadd like nasm * 2011/Feb/07 ver 2.991 beta fix pextrw reg, xmm, imm(Thanks to Gabest) * 2011/Feb/04 ver 2.99 beta support AVX * 2010/Dec/08 ver 2.31 fix ptr [rip + 32bit offset], support rdtscp * 2010/Oct/19 ver 2.30 support pclmulqdq, aesdec, aesdeclast, aesenc, aesenclast, aesimc, aeskeygenassist * 2010/Jun/07 ver 2.29 fix call(