diff options
author | Devine Lu Linvega <[email protected]> | 2020-09-21 17:03:57 -0700 |
---|---|---|
committer | Devine Lu Linvega <[email protected]> | 2020-09-21 17:03:57 -0700 |
commit | cb672d6af5f588e448c1e8853289721d36e4623e (patch) | |
tree | f5baadb401361d85e1eca7e1b996e558f0951c62 /resources/TUTORIAL.md | |
parent | ac051016f2c321d3a35bc9411473a186da37f205 (diff) | |
download | Orca-cb672d6af5f588e448c1e8853289721d36e4623e.tar.gz Orca-cb672d6af5f588e448c1e8853289721d36e4623e.zip |
Updated links to examples
Diffstat (limited to 'resources/TUTORIAL.md')
-rw-r--r-- | resources/TUTORIAL.md | 24 |
1 files changed, 3 insertions, 21 deletions
diff --git a/resources/TUTORIAL.md b/resources/TUTORIAL.md index 5bde455..3b35a50 100644 --- a/resources/TUTORIAL.md +++ b/resources/TUTORIAL.md @@ -1,6 +1,6 @@ # Tutorial -If this is your first time trying out **Orca**, watch this [introduction video](https://www.youtube.com/watch?v=RaI_TuISSJE). If you want to learn how to use a handful of basic operators, have a look at the [workshop](WORKSHOP.md). +If this is your first time trying out **Orca**, watch this [introduction video](https://www.youtube.com/watch?v=RaI_TuISSJE). If you want to learn how to use a handful of basic operators, have a look at the [workshop](WORKSHOP.md). If you're looking for additional examples, visit [this repository](https://git.sr.ht/~rabbits/orca-examples/tree/master/). ## General @@ -19,7 +19,7 @@ If this is your first time trying out **Orca**, watch this [introduction video]( ## Ableton Live -To send [Midi notes](https://github.com/hundredrabbits/Orca#midi) to [Ableton Live](https://www.ableton.com/en/) instruments, bang the Midi operator `:`, like `:03C` to send to _Channel 1, Octave 3, Note C_. Have a look at [midi.orca](https://github.com/hundredrabbits/Orca/blob/master/examples/_midi.orca) to see it in action. +To send [Midi notes](https://github.com/hundredrabbits/Orca#midi) to [Ableton Live](https://www.ableton.com/en/) instruments, bang the Midi operator `:`, like `:03C` to send to _Channel 1, Octave 3, Note C_. Have a look at [midi.orca](hhttps://git.sr.ht/~rabbits/orca-examples/tree/master/basics/_midi.orca) to see it in action. - Launch Ableton Live. - Create a new **midi instrument** track. @@ -28,7 +28,7 @@ To send [Midi notes](https://github.com/hundredrabbits/Orca#midi) to [Ableton Li ## SonicPi -To send [OSC messages](https://github.com/hundredrabbits/Orca#osc) to [SonicPi](http://sonic-pi.net), select [port 4560](https://github.com/samaaron/sonic-pi/blob/master/etc/doc/tutorial/12.1-Receiving-OSC.md). SonicPi listens to the address defined in `sync`, to send to the `live_loop`, bang the OSC node `=`, like `=a`. Have a look at [sonicpi.orca](https://github.com/hundredrabbits/Orca/blob/master/examples/software/sonicpi.orca) to see it in action. If you need help, visit the [SonicPi x Orca forum](https://in-thread.sonic-pi.net/t/using-orca-to-control-sonic-pi-with-osc/2381/). +To send [OSC messages](https://github.com/hundredrabbits/Orca#osc) to [SonicPi](http://sonic-pi.net), select [port 4560](https://github.com/samaaron/sonic-pi/blob/master/etc/doc/tutorial/12.1-Receiving-OSC.md). SonicPi listens to the address defined in `sync`, to send to the `live_loop`, bang the OSC node `=`, like `=a`. If you need help, visit the [SonicPi x Orca forum](https://in-thread.sonic-pi.net/t/using-orca-to-control-sonic-pi-with-osc/2381/). ``` live_loop :drum do @@ -70,24 +70,6 @@ The following is taken from this page: https://answers.bitwig.com/questions/1218 - Use the Hotkey Ctrl+Period to cycle through MIDI output devices until you see your device in the lower-right corner - Bang a MIDI command to VCV: `:03c88` to get a note and gate trigger from MIDI-CV -## Dotgrid - -To send [UDP messages](https://github.com/hundredrabbits/Orca#udp) to [Dotgrid](http://github.com/hundredrabbits/Dotgrid), select [port 49160](https://github.com/hundredrabbits/Orca#udp). To draw lines on Dotgrid, you need to bang the UDP node `;` with different [commands](https://github.com/hundredrabbits/Dotgrid/blob/master/desktop/sources/scripts/listener.js). Have a look at [dotgrid.orca](https://github.com/hundredrabbits/Orca/blob/master/examples/software/dotgrid.orca) to see it in action. - -- `;0`, clear layer **#1**. -- `;0l1234`, add a line from `1,2` to `3,4`. -- `;`, redraw. - -Here's a list of supported operations. - -``` -;0 // Clear Layer 1 -;0l1234 // Add Line from 1,2 to 3,4 -;0c1234 // Add Clockwise Arc from 1,2 to 3,4 -;0r1234 // Add Reverse Arc from 1,2 to 3,4 -; // Redraw -``` - ## FAQS ### Why does placement of `V` matter? |