From ea8faf35798e94657af3da5bffe70841971a3995 Mon Sep 17 00:00:00 2001
From: lsalzman <lsalzman@gmail.com>
Date: Tue, 29 May 2012 19:05:34 -0700
Subject: added per-peer configurable ping interval and timeouts 1.3.4 release
 prep

---
 peer.c | 44 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

(limited to 'peer.c')

diff --git a/peer.c b/peer.c
index 38839b1..25db03a 100644
--- a/peer.c
+++ b/peer.c
@@ -372,6 +372,10 @@ enet_peer_reset (ENetPeer * peer)
     peer -> packetThrottleAcceleration = ENET_PEER_PACKET_THROTTLE_ACCELERATION;
     peer -> packetThrottleDeceleration = ENET_PEER_PACKET_THROTTLE_DECELERATION;
     peer -> packetThrottleInterval = ENET_PEER_PACKET_THROTTLE_INTERVAL;
+    peer -> pingInterval = ENET_PEER_PING_INTERVAL;
+    peer -> timeoutLimit = ENET_PEER_TIMEOUT_LIMIT;
+    peer -> timeoutMinimum = ENET_PEER_TIMEOUT_MINIMUM;
+    peer -> timeoutMaximum = ENET_PEER_TIMEOUT_MAXIMUM;
     peer -> lastRoundTripTime = ENET_PEER_DEFAULT_ROUND_TRIP_TIME;
     peer -> lowestRoundTripTime = ENET_PEER_DEFAULT_ROUND_TRIP_TIME;
     peer -> lastRoundTripTimeVariance = 0;
@@ -412,6 +416,46 @@ enet_peer_ping (ENetPeer * peer)
     enet_peer_queue_outgoing_command (peer, & command, NULL, 0, 0);
 }
 
+/** Sets the interval at which pings will be sent to a peer. 
+    
+    Pings are used both to monitor the liveness of the connection and also to dynamically
+    adjust the throttle during periods of low traffic so that the throttle has reasonable
+    responsiveness during traffic spikes.
+
+    @param peer the peer to adjust
+    @param pingInterval the interval at which to send pings; defaults to ENET_PEER_PING_INTERVAL if 0
+*/
+void
+enet_peer_ping_interval (ENetPeer * peer, enet_uint32 pingInterval)
+{
+    peer -> pingInterval = pingInterval ? pingInterval : ENET_PEER_PING_INTERVAL;
+}
+
+/** Sets the timeout parameters for a peer.
+
+    The timeout parameter control how and when a peer will timeout from a failure to acknowledge
+    reliable traffic. Timeout values use an exponential backoff mechanism, where if a reliable
+    packet is not acknowledge within some multiple of the average RTT plus a variance tolerance, 
+    the timeout will be doubled until it reaches a set limit. If the timeout is thus at this
+    limit and reliable packets have been sent but not acknowledged within a certain minimum time 
+    period, the peer will be disconnected. Alternatively, if reliable packets have been sent
+    but not acknowledged for a certain maximum time period, the peer will be disconnected regardless
+    of the current timeout limit value.
+    
+    @param peer the peer to adjust
+    @param timeoutLimit the timeout limit; defaults to ENET_PEER_TIMEOUT_LIMIT if 0
+    @param timeoutMinimum the timeout minimum; defaults to ENET_PEER_TIMEOUT_MINIMUM if 0
+    @param timeoutMaximum the timeout maximum; defaults to ENET_PEER_TIMEOUT_MAXIMUM if 0
+*/
+
+void
+enet_peer_timeout (ENetPeer * peer, enet_uint32 timeoutLimit, enet_uint32 timeoutMinimum, enet_uint32 timeoutMaximum)
+{
+    peer -> timeoutLimit = timeoutLimit ? timeoutLimit : ENET_PEER_TIMEOUT_LIMIT;
+    peer -> timeoutMinimum = timeoutMinimum ? timeoutMinimum : ENET_PEER_TIMEOUT_MINIMUM;
+    peer -> timeoutMaximum = timeoutMaximum ? timeoutMaximum : ENET_PEER_TIMEOUT_MAXIMUM;
+}
+
 /** Force an immediate disconnection from a peer.
     @param peer peer to disconnect
     @param data data describing the disconnection
-- 
cgit v1.2.3