Add progressbar to flashrom programmer

Only tested with 29F032 and 29LV640 but should still work for all since it was just copy&paste.

3 files changed, 68 insertions, 3 deletions

diff --git a/Cart_Reader/Cart_Reader.ino b/Cart_Reader/Cart_Reader.ino
index 2d7d7ad..e614618 100644
--- a/Cart_Reader/Cart_Reader.ino
+++ b/Cart_Reader/Cart_Reader.ino
@@ -4,8 +4,8 @@
    This project represents a community-driven effort to provide

    an easy to build and easy to modify cartridge dumper.

 

-   Date:             2024-06-26

-   Version:          13.3

+   Date:             2024-06-30

+   Version:          13.4

 

    SD lib: https://github.com/greiman/SdFat

    LCD lib: https://github.com/olikraus/u8g2

diff --git a/Cart_Reader/FLASH.ino b/Cart_Reader/FLASH.ino
index a983469..48568df 100644
--- a/Cart_Reader/FLASH.ino
+++ b/Cart_Reader/FLASH.ino
@@ -1266,6 +1266,12 @@ void writeFlash29F032() {
     // Retry writing, for when /RESET is not connected (floating)

     int dq5failcnt = 0;

     int noread = 0;

+

+    //Initialize progress bar

+    uint32_t processedProgressBar = 0;

+    uint32_t totalProgressBar = (uint32_t)fileSize;

+    draw_progressbar(0, totalProgressBar);

+

     // Fill sdBuffer

     for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {

       // if (currByte >= 0) {

@@ -1314,6 +1320,9 @@ void writeFlash29F032() {
       } else {

         noread = 0;

       }

+      // update progress bar

+      processedProgressBar += 512;

+      draw_progressbar(processedProgressBar, totalProgressBar);

     }

     // Set data pins to input again

     dataIn8();

@@ -1384,6 +1393,11 @@ void writeFlash29F1610() {
     // Set data pins to output

     dataOut();

 

+    //Initialize progress bar

+    uint32_t processedProgressBar = 0;

+    uint32_t totalProgressBar = (uint32_t)fileSize;

+    draw_progressbar(0, totalProgressBar);

+

     for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {

       // Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written

       myFile.read(sdBuffer, 128);

@@ -1403,6 +1417,9 @@ void writeFlash29F1610() {
       for (byte c = 0; c < 128; c++) {

         writeByte_Flash(currByte + c, sdBuffer[c]);

       }

+      // update progress bar

+      processedProgressBar += 128;

+      draw_progressbar(processedProgressBar, totalProgressBar);

     }

 

     // Check if write is complete

@@ -1422,6 +1439,11 @@ void writeFlash29F1601() {
     // Set data pins to output

     dataOut();

 

+    //Initialize progress bar

+    uint32_t processedProgressBar = 0;

+    uint32_t totalProgressBar = (uint32_t)fileSize;

+    draw_progressbar(0, totalProgressBar);

+

     for (unsigned long currByte = 0; currByte < fileSize; currByte += 128) {

       // Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written

       myFile.read(sdBuffer, 128);

@@ -1446,6 +1468,9 @@ void writeFlash29F1601() {
           writeByte_Flash(currByte + c, sdBuffer[c]);

         }

       }

+      // update progress bar

+      processedProgressBar += 128;

+      draw_progressbar(processedProgressBar, totalProgressBar);

     }

 

     // Check if write is complete

@@ -1542,6 +1567,11 @@ void writeFlash29LV640() {
     // Set data pins to output

     dataOut();

 

+    //Initialize progress bar

+    uint32_t processedProgressBar = 0;

+    uint32_t totalProgressBar = (uint32_t)fileSize;

+    draw_progressbar(0, totalProgressBar);

+

     for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {

       // Fill sdBuffer

       myFile.read(sdBuffer, 512);

@@ -1558,6 +1588,9 @@ void writeFlash29LV640() {
         // Check if write is complete

         busyCheck29LV640(currByte + c, sdBuffer[c]);

       }

+      // update progress bar

+      processedProgressBar += 512;

+      draw_progressbar(processedProgressBar, totalProgressBar);

     }

     // Set data pins to input again

     dataIn8();

@@ -1574,6 +1607,11 @@ void writeFlash29GL(unsigned long sectorSize, byte bufferSize) {
     // Set data pins to output

     dataOut();

 

+    //Initialize progress bar

+    uint32_t processedProgressBar = 0;

+    uint32_t totalProgressBar = (uint32_t)fileSize;

+    draw_progressbar(0, totalProgressBar);

+

     for (unsigned long currSector = 0; currSector < fileSize; currSector += sectorSize) {

       // Blink led

       blinkLED();

@@ -1610,6 +1648,9 @@ void writeFlash29GL(unsigned long sectorSize, byte bufferSize) {
           dataOut();

         }

       }

+      // update progress bar

+      processedProgressBar += sectorSize;

+      draw_progressbar(processedProgressBar, totalProgressBar);

     }

     // Set data pins to input again

     dataIn8();

@@ -1626,6 +1667,11 @@ void writeFlash29F800() {
     // Set data pins to output

     dataOut();

 

+    //Initialize progress bar

+    uint32_t processedProgressBar = 0;

+    uint32_t totalProgressBar = (uint32_t)fileSize;

+    draw_progressbar(0, totalProgressBar);

+

     // Fill sdBuffer

     for (unsigned long currByte = 0; currByte < fileSize; currByte += 512) {

       myFile.read(sdBuffer, 512);

@@ -1640,6 +1686,9 @@ void writeFlash29F800() {
         writeByte_Flash(currByte + c, sdBuffer[c]);

         busyCheck29F032(currByte + c, sdBuffer[c]);

       }

+      // update progress bar

+      processedProgressBar += 512;

+      draw_progressbar(processedProgressBar, totalProgressBar);

     }

 

     // Set data pins to input again

@@ -1713,6 +1762,11 @@ void writeFlashE28FXXXJ3A() {
   uint32_t block_addr;

   uint32_t block_addr_mask = ~(sectorSize - 1);

 

+  //Initialize progress bar

+  uint32_t processedProgressBar = 0;

+  uint32_t totalProgressBar = (uint32_t)fileSize;

+  draw_progressbar(0, totalProgressBar);

+

   // Fill sdBuffer

   for (uint32_t currByte = 0; currByte < fileSize; currByte += 512) {

     myFile.read(sdBuffer, 512);

@@ -1749,6 +1803,9 @@ void writeFlashE28FXXXJ3A() {
       while ((readByte_Flash(block_addr) & 0x80) == 0x00)

         ;

     }

+    // update progress bar

+    processedProgressBar += 512;

+    draw_progressbar(processedProgressBar, totalProgressBar);

   }

 

   dataIn8();

@@ -1756,6 +1813,11 @@ void writeFlashE28FXXXJ3A() {
 

 void writeFlashLH28F0XX() {

 

+  //Initialize progress bar

+  uint32_t processedProgressBar = 0;

+  uint32_t totalProgressBar = (uint32_t)fileSize;

+  draw_progressbar(0, totalProgressBar);

+

   // Fill sdBuffer

   for (uint32_t currByte = 0; currByte < fileSize; currByte += 512) {

     myFile.read(sdBuffer, 512);

@@ -1783,6 +1845,9 @@ void writeFlashLH28F0XX() {
       while ((readByte_Flash(currByte + c) & 0x80) == 0x00)

         ;

     }

+    // update progress bar

+    processedProgressBar += 512;

+    draw_progressbar(processedProgressBar, totalProgressBar);

   }

 

   dataIn8();

diff --git a/Cart_Reader/OSCR.cpp b/Cart_Reader/OSCR.cpp
index 8bfc882..bb697d2 100644
--- a/Cart_Reader/OSCR.cpp
+++ b/Cart_Reader/OSCR.cpp
@@ -49,7 +49,7 @@
  * String Constants

  **/

 // Firmware Version

-constexpr char PROGMEM FSTRING_VERSION[] = "V13.3";

+constexpr char PROGMEM FSTRING_VERSION[] = "V13.4";

 

 // Universal

 constexpr char PROGMEM FSTRING_RESET[] = "Reset";