targets: add support for Badger2040 W

Signed-off-by: deadprogram <[email protected]>

4 files changed, 116 insertions, 2 deletions

diff --git a/GNUmakefile b/GNUmakefile
index cbc18c146..5454896bf 100644
--- a/GNUmakefile
+++ b/GNUmakefile
@@ -659,6 +659,8 @@ endif
 	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=badger2040          examples/blinky1
 	@$(MD5SUM) test.hex
+	$(TINYGO) build -size short -o test.hex -target=badger2040-w        examples/blinky1
+	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=tufty2040           examples/blinky1
 	@$(MD5SUM) test.hex
 	$(TINYGO) build -size short -o test.hex -target=thingplus-rp2040    examples/blinky1
diff --git a/src/machine/board_badger2040-w.go b/src/machine/board_badger2040-w.go
new file mode 100644
index 000000000..d0982653b
--- /dev/null
+++ b/src/machine/board_badger2040-w.go
@@ -0,0 +1,95 @@
+//go:build badger2040_w
+
+// This contains the pin mappings for the Badger 2040 W board.
+//
+// For more information, see: https://shop.pimoroni.com/products/badger-2040-w
+// Also
+// - Badger 2040 W schematic: https://cdn.shopify.com/s/files/1/0174/1800/files/badger_w_schematic.pdf?v=1675859004
+package machine
+
+const (
+	LED Pin = GPIO22
+
+	BUTTON_A    Pin = GPIO12
+	BUTTON_B    Pin = GPIO13
+	BUTTON_C    Pin = GPIO14
+	BUTTON_UP   Pin = GPIO15
+	BUTTON_DOWN Pin = GPIO11
+	BUTTON_USER Pin = NoPin // Not available on Badger 2040 W
+
+	EPD_BUSY_PIN  Pin = GPIO26
+	EPD_RESET_PIN Pin = GPIO21
+	EPD_DC_PIN    Pin = GPIO20
+	EPD_CS_PIN    Pin = GPIO17
+	EPD_SCK_PIN   Pin = GPIO18
+	EPD_SDO_PIN   Pin = GPIO19
+
+	VBUS_DETECT Pin = GPIO24
+	VREF_POWER  Pin = GPIO27
+	VREF_1V24   Pin = GPIO28
+	VBAT_SENSE  Pin = GPIO29
+	ENABLE_3V3  Pin = GPIO10
+
+	BATTERY   = VBAT_SENSE
+	RTC_ALARM = GPIO8
+)
+
+// I2C pins
+const (
+	I2C0_SDA_PIN Pin = GPIO4
+	I2C0_SCL_PIN Pin = GPIO5
+
+	I2C1_SDA_PIN Pin = NoPin
+	I2C1_SCL_PIN Pin = NoPin
+)
+
+// SPI pins.
+const (
+	SPI0_SCK_PIN Pin = GPIO18
+	SPI0_SDO_PIN Pin = GPIO19
+	SPI0_SDI_PIN Pin = GPIO16
+
+	SPI1_SCK_PIN Pin = NoPin
+	SPI1_SDO_PIN Pin = NoPin
+	SPI1_SDI_PIN Pin = NoPin
+)
+
+// QSPI pins¿?
+const (
+/*
+	TODO
+
+SPI0_SD0_PIN Pin = QSPI_SD0
+SPI0_SD1_PIN Pin = QSPI_SD1
+SPI0_SD2_PIN Pin = QSPI_SD2
+SPI0_SD3_PIN Pin = QSPI_SD3
+SPI0_SCK_PIN Pin = QSPI_SCLKGPIO6
+SPI0_CS_PIN  Pin = QSPI_CS
+*/
+)
+
+// Onboard crystal oscillator frequency, in MHz.
+const (
+	xoscFreq = 12 // MHz
+)
+
+// USB CDC identifiers
+const (
+	usb_STRING_PRODUCT      = "Badger 2040 W"
+	usb_STRING_MANUFACTURER = "Pimoroni"
+)
+
+var (
+	usb_VID uint16 = 0x2e8a
+	usb_PID uint16 = 0x0003
+)
+
+// UART pins
+const (
+	UART0_TX_PIN = GPIO0
+	UART0_RX_PIN = GPIO1
+	UART_TX_PIN  = UART0_TX_PIN
+	UART_RX_PIN  = UART0_RX_PIN
+)
+
+var DefaultUART = UART0
diff --git a/src/machine/board_badger2040.go b/src/machine/board_badger2040.go
index 049e3cb89..73f802a90 100644
--- a/src/machine/board_badger2040.go
+++ b/src/machine/board_badger2040.go
@@ -1,6 +1,6 @@
 //go:build badger2040
 
-// This contains the pin mappings for the Badger 2040 Connect board.
+// This contains the pin mappings for the Badger 2040 board.
 //
 // For more information, see: https://shop.pimoroni.com/products/badger-2040
 // Also
@@ -25,8 +25,12 @@ const (
 	EPD_SDO_PIN   Pin = GPIO19
 
 	VBUS_DETECT Pin = GPIO24
-	BATTERY     Pin = GPIO29
+	VREF_POWER  Pin = GPIO27
+	VREF_1V24   Pin = GPIO28
+	VBAT_SENSE  Pin = GPIO29
 	ENABLE_3V3  Pin = GPIO10
+
+	BATTERY = VBAT_SENSE
 )
 
 // I2C pins
diff --git a/targets/badger2040-w.json b/targets/badger2040-w.json
new file mode 100644
index 000000000..4b29dc85b
--- /dev/null
+++ b/targets/badger2040-w.json
@@ -0,0 +1,13 @@
+{
+    "inherits": [
+        "rp2040"
+    ],
+    "serial-port": ["2e8a:0003"],
+    "build-tags": ["badger2040_w"],
+    "ldflags": [
+        "--defsym=__flash_size=1020K"
+    ],
+    "extra-files": [
+        "targets/pico-boot-stage2.S"
+    ]
+}