diff options
114 files changed, 185 insertions, 104 deletions
@@ -436,6 +436,8 @@ endif @$(MD5SUM) test.hex $(TINYGO) build -size short -o test.hex -target=pca10040 -opt=1 examples/blinky1 @$(MD5SUM) test.hex + $(TINYGO) build -size short -o test.hex -target=pca10040 -serial=none examples/echo + @$(MD5SUM) test.hex $(TINYGO) build -o test.nro -target=nintendoswitch examples/serial @$(MD5SUM) test.nro $(TINYGO) build -size short -o test.hex -target=pca10040 -opt=0 ./testdata/stdlib.go diff --git a/compileopts/config.go b/compileopts/config.go index 821aa8313..a60f778e0 100644 --- a/compileopts/config.go +++ b/compileopts/config.go @@ -55,7 +55,7 @@ func (c *Config) GOARCH() string { // BuildTags returns the complete list of build tags used during this build. func (c *Config) BuildTags() []string { - tags := append(c.Target.BuildTags, []string{"tinygo", "gc." + c.GC(), "scheduler." + c.Scheduler()}...) + tags := append(c.Target.BuildTags, []string{"tinygo", "gc." + c.GC(), "scheduler." + c.Scheduler(), "serial." + c.Serial()}...) for i := 1; i <= c.GoMinorVersion; i++ { tags = append(tags, fmt.Sprintf("go1.%d", i)) } @@ -113,6 +113,18 @@ func (c *Config) Scheduler() string { return "coroutines" } +// Serial returns the serial implementation for this build configuration: uart, +// usb (meaning USB-CDC), or none. +func (c *Config) Serial() string { + if c.Options.Serial != "" { + return c.Options.Serial + } + if c.Target.Serial != "" { + return c.Target.Serial + } + return "none" +} + // OptLevels returns the optimization level (0-2), size level (0-2), and inliner // threshold as used in the LLVM optimization pipeline. func (c *Config) OptLevels() (optLevel, sizeLevel int, inlinerThreshold uint) { diff --git a/compileopts/options.go b/compileopts/options.go index 10c143b80..7e7bfcafc 100644 --- a/compileopts/options.go +++ b/compileopts/options.go @@ -9,6 +9,7 @@ import ( var ( validGCOptions = []string{"none", "leaking", "extalloc", "conservative"} validSchedulerOptions = []string{"none", "tasks", "coroutines"} + validSerialOptions = []string{"none", "uart", "usb"} validPrintSizeOptions = []string{"none", "short", "full"} validPanicStrategyOptions = []string{"print", "trap"} validOptOptions = []string{"none", "0", "1", "2", "s", "z"} @@ -22,6 +23,7 @@ type Options struct { GC string PanicStrategy string Scheduler string + Serial string PrintIR bool DumpSSA bool VerifyIR bool @@ -59,6 +61,15 @@ func (o *Options) Verify() error { } } + if o.Serial != "" { + valid := isInArray(validSerialOptions, o.Serial) + if !valid { + return fmt.Errorf(`invalid serial option '%s': valid values are %s`, + o.Serial, + strings.Join(validSerialOptions, ", ")) + } + } + if o.PrintSizes != "" { valid := isInArray(validPrintSizeOptions, o.PrintSizes) if !valid { diff --git a/compileopts/target.go b/compileopts/target.go index 4fb62fce3..ba5f73826 100644 --- a/compileopts/target.go +++ b/compileopts/target.go @@ -31,6 +31,7 @@ type TargetSpec struct { BuildTags []string `json:"build-tags"` GC string `json:"gc"` Scheduler string `json:"scheduler"` + Serial string `json:"serial"` // which serial output to use (uart, usb, none) Linker string `json:"linker"` RTLib string `json:"rtlib"` // compiler runtime library (libgcc, compiler-rt) Libc string `json:"libc"` @@ -1009,6 +1009,7 @@ func main() { gc := flag.String("gc", "", "garbage collector to use (none, leaking, extalloc, conservative)") panicStrategy := flag.String("panic", "print", "panic strategy (print, trap)") scheduler := flag.String("scheduler", "", "which scheduler to use (none, coroutines, tasks)") + serial := flag.String("serial", "", "which serial output to use (none, uart, usb)") printIR := flag.Bool("printir", false, "print LLVM IR") dumpSSA := flag.Bool("dumpssa", false, "dump internal Go SSA") verifyIR := flag.Bool("verifyir", false, "run extra verification steps on LLVM IR") @@ -1081,6 +1082,7 @@ func main() { GC: *gc, PanicStrategy: *panicStrategy, Scheduler: *scheduler, + Serial: *serial, PrintIR: *printIR, DumpSSA: *dumpSSA, VerifyIR: *verifyIR, diff --git a/src/machine/board_arduino_mkr1000.go b/src/machine/board_arduino_mkr1000.go index 863faeeb6..30ad48e90 100644 --- a/src/machine/board_arduino_mkr1000.go +++ b/src/machine/board_arduino_mkr1000.go @@ -47,8 +47,6 @@ const ( LED = D6 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN Pin = PA24 diff --git a/src/machine/board_arduino_zero.go b/src/machine/board_arduino_zero.go index 773515c99..651eea821 100644 --- a/src/machine/board_arduino_zero.go +++ b/src/machine/board_arduino_zero.go @@ -35,8 +35,6 @@ const ( LED3 Pin = PB03 // RX LED ) -var Serial = USB - // ADC pins const ( AREF Pin = PA03 diff --git a/src/machine/board_atsamd21.go b/src/machine/board_atsamd21.go index 800c4cb30..3b11b452a 100644 --- a/src/machine/board_atsamd21.go +++ b/src/machine/board_atsamd21.go @@ -74,5 +74,3 @@ const ( PB30 Pin = 62 PB31 Pin = 63 ) - -var Serial = USB diff --git a/src/machine/board_atsame54-xpro.go b/src/machine/board_atsame54-xpro.go index 01ae282c1..c61324b64 100644 --- a/src/machine/board_atsame54-xpro.go +++ b/src/machine/board_atsame54-xpro.go @@ -15,8 +15,6 @@ const ( BUTTON = PB31 ) -var Serial = USB - const ( // https://ww1.microchip.com/downloads/en/DeviceDoc/70005321A.pdf diff --git a/src/machine/board_bluepill.go b/src/machine/board_bluepill.go index ce925025f..bbfdac8bb 100644 --- a/src/machine/board_bluepill.go +++ b/src/machine/board_bluepill.go @@ -17,7 +17,7 @@ const ( BUTTON = PA0 ) -var Serial = UART1 +var DefaultUART = UART1 // UART pins const ( diff --git a/src/machine/board_circuitplay_bluefruit.go b/src/machine/board_circuitplay_bluefruit.go index 967672495..a65861b27 100644 --- a/src/machine/board_circuitplay_bluefruit.go +++ b/src/machine/board_circuitplay_bluefruit.go @@ -57,8 +57,6 @@ const ( UART_RX_PIN = P0_30 // PORTB ) -var Serial = USB - // I2C pins const ( SDA_PIN = P0_05 // I2C0 external diff --git a/src/machine/board_clue_alpha.go b/src/machine/board_clue_alpha.go index b421dccce..67c2ad7ef 100644 --- a/src/machine/board_clue_alpha.go +++ b/src/machine/board_clue_alpha.go @@ -104,11 +104,6 @@ const ( UART_TX_PIN = D1 ) -// Serial is the USB device -var ( - Serial = USB -) - // I2C pins const ( SDA_PIN = D20 // I2C0 external diff --git a/src/machine/board_esp32-coreboard-v2.go b/src/machine/board_esp32-coreboard-v2.go index b1d61d87e..0145fe4ea 100644 --- a/src/machine/board_esp32-coreboard-v2.go +++ b/src/machine/board_esp32-coreboard-v2.go @@ -68,8 +68,6 @@ const ( ADC3 Pin = IO39 ) -var Serial = UART0 - // UART0 pins const ( UART_TX_PIN = IO1 diff --git a/src/machine/board_feather-m4-can.go b/src/machine/board_feather-m4-can.go index 7911f5561..a954ce9cb 100644 --- a/src/machine/board_feather-m4-can.go +++ b/src/machine/board_feather-m4-can.go @@ -47,8 +47,6 @@ const ( WS2812 = D8 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PA24 diff --git a/src/machine/board_feather-m4.go b/src/machine/board_feather-m4.go index 394191366..86158ed64 100644 --- a/src/machine/board_feather-m4.go +++ b/src/machine/board_feather-m4.go @@ -40,8 +40,6 @@ const ( WS2812 = D8 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PA24 diff --git a/src/machine/board_feather-nrf52840.go b/src/machine/board_feather-nrf52840.go index 641a9de81..488d9608b 100644 --- a/src/machine/board_feather-nrf52840.go +++ b/src/machine/board_feather-nrf52840.go @@ -76,11 +76,6 @@ const ( UART_TX_PIN = D1 ) -// Serial is the USB device -var ( - Serial = USB -) - // I2C pins const ( SDA_PIN = D22 // I2C0 external diff --git a/src/machine/board_feather-stm32f405.go b/src/machine/board_feather-stm32f405.go index 4bf1744b9..ebba9edc8 100644 --- a/src/machine/board_feather-stm32f405.go +++ b/src/machine/board_feather-stm32f405.go @@ -141,7 +141,7 @@ var ( TxAltFuncSelector: AF7_USART1_2_3, RxAltFuncSelector: AF7_USART1_2_3, } - Serial = UART1 + DefaultUART = UART1 ) func initUART() { diff --git a/src/machine/board_grandcentral-m4.go b/src/machine/board_grandcentral-m4.go index 014eda801..c1b629c9e 100644 --- a/src/machine/board_grandcentral-m4.go +++ b/src/machine/board_grandcentral-m4.go @@ -142,8 +142,6 @@ const ( WS2812 = NEOPIXEL_PIN ) -var Serial = USB - // UART pins const ( UART1_RX_PIN = D0 // (PB25) diff --git a/src/machine/board_hifive1b.go b/src/machine/board_hifive1b.go index 7ce225ccf..d16225a68 100644 --- a/src/machine/board_hifive1b.go +++ b/src/machine/board_hifive1b.go @@ -35,7 +35,7 @@ const ( LED_BLUE = P21 ) -var Serial = UART0 +var DefaultUART = UART0 const ( // TODO: figure out the pin numbers for these. diff --git a/src/machine/board_itsybitsy-m4.go b/src/machine/board_itsybitsy-m4.go index 282f9087a..099ceed46 100644 --- a/src/machine/board_itsybitsy-m4.go +++ b/src/machine/board_itsybitsy-m4.go @@ -37,8 +37,6 @@ const ( LED = D13 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PA24 diff --git a/src/machine/board_itsybitsy-nrf52840.go b/src/machine/board_itsybitsy-nrf52840.go index 64aeed506..fc9b23f25 100644 --- a/src/machine/board_itsybitsy-nrf52840.go +++ b/src/machine/board_itsybitsy-nrf52840.go @@ -70,11 +70,6 @@ const ( UART_TX_PIN = D1 ) -// Serial is the USB device -var ( - Serial = USB -) - // I2C pins const ( SDA_PIN = D21 // I2C0 external diff --git a/src/machine/board_lgt92.go b/src/machine/board_lgt92.go index 97e1fa2ab..e043dcd77 100644 --- a/src/machine/board_lgt92.go +++ b/src/machine/board_lgt92.go @@ -54,7 +54,7 @@ const ( I2C0_SDA_PIN = PA10 ) -var Serial = UART0 +var DefaultUART = UART0 var ( diff --git a/src/machine/board_maixbit.go b/src/machine/board_maixbit.go index 766054d0d..e2c551b0e 100644 --- a/src/machine/board_maixbit.go +++ b/src/machine/board_maixbit.go @@ -52,7 +52,7 @@ const ( LED_BLUE = D14 ) -var Serial = UART0 +var DefaultUART = UART0 // Default pins for UARTHS. const ( diff --git a/src/machine/board_metro-m4-airlift.go b/src/machine/board_metro-m4-airlift.go index 276defa92..4aa248150 100644 --- a/src/machine/board_metro-m4-airlift.go +++ b/src/machine/board_metro-m4-airlift.go @@ -41,8 +41,6 @@ const ( WS2812 = D40 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PA24 diff --git a/src/machine/board_microbit-v2.go b/src/machine/board_microbit-v2.go index a034e2ef8..38a9dad50 100644 --- a/src/machine/board_microbit-v2.go +++ b/src/machine/board_microbit-v2.go @@ -12,7 +12,7 @@ const ( BUTTONB Pin = P11 ) -var Serial = UART0 +var DefaultUART = UART0 // UART pins const ( diff --git a/src/machine/board_microbit.go b/src/machine/board_microbit.go index 5b0ac2bff..b4af49f8d 100644 --- a/src/machine/board_microbit.go +++ b/src/machine/board_microbit.go @@ -12,7 +12,7 @@ const ( BUTTONB Pin = 26 ) -var Serial = UART0 +var DefaultUART = UART0 // UART pins const ( diff --git a/src/machine/board_nicenano.go b/src/machine/board_nicenano.go index 213fdb339..94511bf9f 100644 --- a/src/machine/board_nicenano.go +++ b/src/machine/board_nicenano.go @@ -54,11 +54,6 @@ const ( UART_TX_PIN = P0_08 ) -// Serial is the USB device -var ( - Serial = USB -) - // I2C pins const ( SDA_PIN = P0_17 // I2C0 external diff --git a/src/machine/board_nodemcu.go b/src/machine/board_nodemcu.go index 4177f80c4..f9f1af4f9 100644 --- a/src/machine/board_nodemcu.go +++ b/src/machine/board_nodemcu.go @@ -20,8 +20,6 @@ const ( // Onboard blue LED (on the AI-Thinker module). const LED = D4 -var Serial = UART0 - // SPI pins const ( SPI0_SCK_PIN = D5 diff --git a/src/machine/board_nrf52840-mdk-usb-dongle.go b/src/machine/board_nrf52840-mdk-usb-dongle.go index e4923f4e9..57a3d1976 100644 --- a/src/machine/board_nrf52840-mdk-usb-dongle.go +++ b/src/machine/board_nrf52840-mdk-usb-dongle.go @@ -23,9 +23,6 @@ const ( UART_RX_PIN Pin = NoPin ) -// Serial is the USB device -var Serial = USB - // I2C pins (unused) const ( SDA_PIN = NoPin diff --git a/src/machine/board_nrf52840-mdk.go b/src/machine/board_nrf52840-mdk.go index d9dc41305..fbc42861b 100644 --- a/src/machine/board_nrf52840-mdk.go +++ b/src/machine/board_nrf52840-mdk.go @@ -18,9 +18,6 @@ const ( UART_RX_PIN Pin = 19 ) -// Serial is the USB device -var Serial = USB - // I2C pins (unused) const ( SDA_PIN = NoPin diff --git a/src/machine/board_nucleof103rb.go b/src/machine/board_nucleof103rb.go index 6fa0c27c7..22580e20b 100644 --- a/src/machine/board_nucleof103rb.go +++ b/src/machine/board_nucleof103rb.go @@ -34,7 +34,7 @@ var ( Buffer: NewRingBuffer(), Bus: stm32.USART2, } - Serial = UART2 + DefaultUART = UART2 ) func init() { diff --git a/src/machine/board_nucleof722ze.go b/src/machine/board_nucleof722ze.go index 003e8fc75..41d3f2849 100644 --- a/src/machine/board_nucleof722ze.go +++ b/src/machine/board_nucleof722ze.go @@ -38,7 +38,7 @@ var ( TxAltFuncSelector: UART_ALT_FN, RxAltFuncSelector: UART_ALT_FN, } - Serial = UART1 + DefaultUART = UART1 ) func init() { diff --git a/src/machine/board_nucleol031k6.go b/src/machine/board_nucleol031k6.go index a758ba932..fe85f276b 100644 --- a/src/machine/board_nucleol031k6.go +++ b/src/machine/board_nucleol031k6.go @@ -76,7 +76,7 @@ var ( TxAltFuncSelector: 4, RxAltFuncSelector: 4, } - Serial = UART1 + DefaultUART = UART1 // I2C1 is documented, alias to I2C0 as well I2C1 = &I2C{ diff --git a/src/machine/board_nucleol432kc.go b/src/machine/board_nucleol432kc.go index d44e0f4fd..bfebd1eed 100644 --- a/src/machine/board_nucleol432kc.go +++ b/src/machine/board_nucleol432kc.go @@ -78,7 +78,7 @@ var ( TxAltFuncSelector: 7, RxAltFuncSelector: 3, } - Serial = UART1 + DefaultUART = UART1 // I2C1 is documented, alias to I2C0 as well I2C1 = &I2C{ diff --git a/src/machine/board_nucleol552ze.go b/src/machine/board_nucleol552ze.go index 98e2d5c1f..a0d3ee522 100644 --- a/src/machine/board_nucleol552ze.go +++ b/src/machine/board_nucleol552ze.go @@ -38,7 +38,7 @@ var ( TxAltFuncSelector: UART_ALT_FN, RxAltFuncSelector: UART_ALT_FN, } - Serial = UART1 + DefaultUART = UART1 ) const ( diff --git a/src/machine/board_particle_argon.go b/src/machine/board_particle_argon.go index 1130eaf82..9427029f4 100644 --- a/src/machine/board_particle_argon.go +++ b/src/machine/board_particle_argon.go @@ -41,7 +41,7 @@ const ( // UART var ( - Serial = UART0 + DefaultUART = UART0 ) const ( diff --git a/src/machine/board_particle_boron.go b/src/machine/board_particle_boron.go index 6c2f70a80..b6a2c3e54 100644 --- a/src/machine/board_particle_boron.go +++ b/src/machine/board_particle_boron.go @@ -41,7 +41,7 @@ const ( // UART var ( - Serial = UART0 + DefaultUART = UART0 ) const ( diff --git a/src/machine/board_particle_xenon.go b/src/machine/board_particle_xenon.go index a6e48ae0a..0b25f373b 100644 --- a/src/machine/board_particle_xenon.go +++ b/src/machine/board_particle_xenon.go @@ -41,7 +41,7 @@ const ( // UART var ( - Serial = UART0 + DefaultUART = UART0 ) const ( diff --git a/src/machine/board_pca10031.go b/src/machine/board_pca10031.go index fbddfb232..122c00d20 100644 --- a/src/machine/board_pca10031.go +++ b/src/machine/board_pca10031.go @@ -19,7 +19,7 @@ const ( LED_BLUE Pin = 23 ) -var Serial = UART0 +var DefaultUART = UART0 // UART pins const ( diff --git a/src/machine/board_pca10040.go b/src/machine/board_pca10040.go index 10e2ab2ed..f425ca37c 100644 --- a/src/machine/board_pca10040.go +++ b/src/machine/board_pca10040.go @@ -23,7 +23,7 @@ const ( BUTTON4 Pin = 16 ) -var Serial = UART0 +var DefaultUART = UART0 // UART pins for NRF52840-DK const ( diff --git a/src/machine/board_pca10056.go b/src/machine/board_pca10056.go index 824bd3f01..783629465 100644 --- a/src/machine/board_pca10056.go +++ b/src/machine/board_pca10056.go @@ -22,7 +22,7 @@ const ( BUTTON4 Pin = 25 ) -var Serial = UART0 +var DefaultUART = UART0 // UART pins const ( diff --git a/src/machine/board_pca10059.go b/src/machine/board_pca10059.go index 5079534aa..7f6167913 100644 --- a/src/machine/board_pca10059.go +++ b/src/machine/board_pca10059.go @@ -34,11 +34,6 @@ const ( UART_RX_PIN Pin = NoPin ) -// Serial is the USB device -var ( - Serial = USB -) - // I2C pins (unused) const ( SDA_PIN = NoPin diff --git a/src/machine/board_pinetime-devkit0.go b/src/machine/board_pinetime-devkit0.go index 5222010bd..b9669c84d 100644 --- a/src/machine/board_pinetime-devkit0.go +++ b/src/machine/board_pinetime-devkit0.go @@ -17,7 +17,7 @@ const ( LED3 = LCD_BACKLIGHT_LOW ) -var Serial = UART0 +var DefaultUART = UART0 // UART pins for PineTime. Note that RX is set to NoPin as RXD is not listed in // the PineTime schematic 1.0: diff --git a/src/machine/board_pybadge.go b/src/machine/board_pybadge.go index 3ff24a160..e175da683 100644 --- a/src/machine/board_pybadge.go +++ b/src/machine/board_pybadge.go @@ -67,8 +67,6 @@ const ( BUTTON_B_MASK = 128 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PA24 diff --git a/src/machine/board_pygamer.go b/src/machine/board_pygamer.go index 890c3d3d9..f537f8529 100644 --- a/src/machine/board_pygamer.go +++ b/src/machine/board_pygamer.go @@ -70,8 +70,6 @@ const ( BUTTON_B_MASK = 128 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PA24 diff --git a/src/machine/board_pyportal.go b/src/machine/board_pyportal.go index 7e28de44a..ff2fcb7fe 100644 --- a/src/machine/board_pyportal.go +++ b/src/machine/board_pyportal.go @@ -95,8 +95,6 @@ const ( LED = D13 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PA24 diff --git a/src/machine/board_reelboard.go b/src/machine/board_reelboard.go index 70eb70539..7fd715bb7 100644 --- a/src/machine/board_reelboard.go +++ b/src/machine/board_reelboard.go @@ -29,7 +29,7 @@ const ( BUTTON Pin = 7 ) -var Serial = UART0 +var DefaultUART = UART0 // UART pins const ( diff --git a/src/machine/board_stm32f4disco.go b/src/machine/board_stm32f4disco.go index 49f5650fd..cc3711a19 100644 --- a/src/machine/board_stm32f4disco.go +++ b/src/machine/board_stm32f4disco.go @@ -38,7 +38,7 @@ var ( TxAltFuncSelector: AF7_USART1_2_3, RxAltFuncSelector: AF7_USART1_2_3, } - Serial = UART1 + DefaultUART = UART1 ) // set up RX IRQ handler. Follow similar pattern for other UARTx instances diff --git a/src/machine/board_teensy36.go b/src/machine/board_teensy36.go index 0808b4b35..8fa71f6e9 100644 --- a/src/machine/board_teensy36.go +++ b/src/machine/board_teensy36.go @@ -87,6 +87,8 @@ var ( TeensyUART5 = UART4 ) +var DefaultUART = UART0 + const ( defaultUART0RX = D00 defaultUART0TX = D01 diff --git a/src/machine/board_teensy40.go b/src/machine/board_teensy40.go index 54ae4e6b4..289edadd8 100644 --- a/src/machine/board_teensy40.go +++ b/src/machine/board_teensy40.go @@ -136,9 +136,9 @@ const ( ) var ( - Serial = UART1 - UART1 = &_UART1 - _UART1 = UART{ + DefaultUART = UART1 + UART1 = &_UART1 + _UART1 = UART{ Bus: nxp.LPUART6, Buffer: NewRingBuffer(), txBuffer: NewRingBuffer(), diff --git a/src/machine/board_wioterminal.go b/src/machine/board_wioterminal.go index abbe55500..57bbff1b5 100644 --- a/src/machine/board_wioterminal.go +++ b/src/machine/board_wioterminal.go @@ -325,8 +325,6 @@ const ( OUTPUT_CTR_3V3 = PC15 ) -var Serial = USB - // USBCDC pins const ( USBCDC_DM_PIN = PIN_USB_DM diff --git a/src/machine/board_x9pro.go b/src/machine/board_x9pro.go index 63d7257a5..111dcf5fd 100644 --- a/src/machine/board_x9pro.go +++ b/src/machine/board_x9pro.go @@ -27,4 +27,4 @@ const ( const HasLowFrequencyCrystal = true -var Serial = UART0 +var DefaultUART = UART0 diff --git a/src/machine/machine_atmega.go b/src/machine/machine_atmega.go index fe6536e7f..6e2b59cf1 100644 --- a/src/machine/machine_atmega.go +++ b/src/machine/machine_atmega.go @@ -122,7 +122,7 @@ func (i2c *I2C) readByte() byte { } // Always use UART0 as the serial output. -var Serial = UART0 +var DefaultUART = UART0 // UART var ( diff --git a/src/machine/machine_esp32.go b/src/machine/machine_esp32.go index ee3f61de1..b5f801b49 100644 --- a/src/machine/machine_esp32.go +++ b/src/machine/machine_esp32.go @@ -251,6 +251,8 @@ func (p Pin) mux() *volatile.Register32 { } } +var DefaultUART = UART0 + var ( UART0 = &_UART0 _UART0 = UART{Bus: esp.UART0, Buffer: NewRingBuffer()} diff --git a/src/machine/machine_esp8266.go b/src/machine/machine_esp8266.go index e8a9ecf64..72c672066 100644 --- a/src/machine/machine_esp8266.go +++ b/src/machine/machine_esp8266.go @@ -139,6 +139,8 @@ func (p Pin) PortMaskClear() (*uint32, uint32) { return &esp.GPIO.GPIO_OUT_W1TC.Reg, 1 << p } +var DefaultUART = UART0 + // UART0 is a hardware UART that supports both TX and RX. var UART0 = &_UART0 var _UART0 = UART{Buffer: NewRingBuffer()} diff --git a/src/machine/machine_generic.go b/src/machine/machine_generic.go index 98dca2df8..70551e27a 100644 --- a/src/machine/machine_generic.go +++ b/src/machine/machine_generic.go @@ -11,6 +11,12 @@ var ( USB = &UART{100} ) +// The Serial port always points to the default UART in a simulated environment. +// +// TODO: perhaps this should be a special serial object that outputs via WASI +// stdout calls. +var Serial = UART0 + const ( PinInput PinMode = iota PinOutput @@ -118,12 +124,6 @@ type UART struct { Bus uint8 } -type UARTConfig struct { - BaudRate uint32 - TX Pin - RX Pin -} - // Configure the UART. func (uart *UART) Configure(config UARTConfig) { uartConfigure(uart.Bus, config.TX, config.RX) diff --git a/src/machine/machine_rp2040.go b/src/machine/machine_rp2040.go index f7580967a..297c92e3b 100644 --- a/src/machine/machine_rp2040.go +++ b/src/machine/machine_rp2040.go @@ -108,7 +108,7 @@ var ( } ) -var Serial = UART0 +var DefaultUART = UART0 func init() { UART0.Interrupt = interrupt.New(rp.IRQ_UART0_IRQ, _UART0.handleInterrupt) diff --git a/src/machine/serial-none.go b/src/machine/serial-none.go new file mode 100644 index 000000000..22e94cc90 --- /dev/null +++ b/src/machine/serial-none.go @@ -0,0 +1,6 @@ +// +build baremetal,serial.none + +package machine + +// Serial is a null device: writes to it are ignored. +var Serial = NullSerial{} diff --git a/src/machine/serial-uart.go b/src/machine/serial-uart.go new file mode 100644 index 000000000..d3edf832f --- /dev/null +++ b/src/machine/serial-uart.go @@ -0,0 +1,6 @@ +// +build baremetal,serial.uart + +package machine + +// Serial is implemented via the default (usually the first) UART on the chip. +var Serial = DefaultUART diff --git a/src/machine/serial-usb.go b/src/machine/serial-usb.go new file mode 100644 index 000000000..476d4b0cf --- /dev/null +++ b/src/machine/serial-usb.go @@ -0,0 +1,6 @@ +// +build baremetal,serial.usb + +package machine + +// Serial is implemented via USB (USB-CDC). +var Serial = USB diff --git a/src/machine/serial.go b/src/machine/serial.go new file mode 100644 index 000000000..fd02d6ca0 --- /dev/null +++ b/src/machine/serial.go @@ -0,0 +1,46 @@ +package machine + +import "errors" + +var errNoByte = errors.New("machine: no byte read") + +// UARTConfig is a struct with which a UART (or similar object) can be +// configured. The baud rate is usually respected, but TX and RX may be ignored +// depending on the chip and the type of object. +type UARTConfig struct { + BaudRate uint32 + TX Pin + RX Pin +} + +// NullSerial is a serial version of /dev/null (or null router): it drops +// everything that is written to it. +type NullSerial struct { +} + +// Configure does nothing: the null serial has no configuration. +func (ns NullSerial) Configure(config UARTConfig) error { + return nil +} + +// WriteByte is a no-op: the null serial doesn't write bytes. +func (ns NullSerial) WriteByte(b byte) error { + return nil +} + +// ReadByte always returns an error because there aren't any bytes to read. +func (ns NullSerial) ReadByte() (byte, error) { + return 0, errNoByte +} + +// Buffered returns how many bytes are buffered in the UART. It always returns 0 +// as there are no bytes to read. +func (ns NullSerial) Buffered() int { + return 0 +} + +// Write is a no-op: none of the data is being written and it will not return an +// error. +func (ns NullSerial) Write(p []byte) (n int, err error) { + return len(p), nil +} diff --git a/src/machine/uart.go b/src/machine/uart.go index 701fb9797..8fbac8711 100644 --- a/src/machine/uart.go +++ b/src/machine/uart.go @@ -23,12 +23,6 @@ const ( ParityOdd UARTParity = 2 ) -type UARTConfig struct { - BaudRate uint32 - TX Pin - RX Pin -} - // To implement the UART interface for a board, you must declare a concrete type as follows: // // type UART struct { diff --git a/targets/arduino-mkr1000.json b/targets/arduino-mkr1000.json index a5abfca52..89d7bfa69 100644 --- a/targets/arduino-mkr1000.json +++ b/targets/arduino-mkr1000.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd21g18a"], "build-tags": ["arduino_mkr1000"], + "serial": "usb", "flash-command": "bossac -i -e -w -v -R -U --port={port} --offset=0x2000 {bin}", "flash-1200-bps-reset": "true" } diff --git a/targets/arduino-zero.json b/targets/arduino-zero.json index 50483512e..045bb8c05 100644 --- a/targets/arduino-zero.json +++ b/targets/arduino-zero.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd21g18a"], "build-tags": ["arduino_zero"], + "serial": "usb", "flash-command": "bossac -i -e -w -v -R -U --port={port} --offset=0x2000 {bin}", "flash-1200-bps-reset": "true" } diff --git a/targets/atmega1280.json b/targets/atmega1280.json index 21324a36d..2b0bfde7b 100644 --- a/targets/atmega1280.json +++ b/targets/atmega1280.json @@ -2,6 +2,7 @@ "inherits": ["avr"], "cpu": "atmega1280", "build-tags": ["atmega1280", "atmega"], + "serial": "uart", "cflags": [ "-mmcu=atmega1280" ], diff --git a/targets/atmega1284p.json b/targets/atmega1284p.json index 2c2d29e18..3fbecd4b7 100644 --- a/targets/atmega1284p.json +++ b/targets/atmega1284p.json @@ -2,6 +2,7 @@ "inherits": ["avr"], "cpu": "atmega1284p", "build-tags": ["atmega1284p", "atmega"], + "serial": "uart", "cflags": [ "-mmcu=atmega1284p" ], diff --git a/targets/atmega2560.json b/targets/atmega2560.json index f460c9c89..9caa088cf 100644 --- a/targets/atmega2560.json +++ b/targets/atmega2560.json @@ -2,6 +2,7 @@ "inherits": ["avr"], "cpu": "atmega2560", "build-tags": ["atmega2560", "atmega"], + "serial": "uart", "cflags": [ "-mmcu=atmega2560" ], diff --git a/targets/atmega328p.json b/targets/atmega328p.json index 7a10eceba..24a272147 100644 --- a/targets/atmega328p.json +++ b/targets/atmega328p.json @@ -2,6 +2,7 @@ "inherits": ["avr"], "cpu": "atmega328p", "build-tags": ["atmega328p", "atmega", "avr5"], + "serial": "uart", "cflags": [ "-mmcu=atmega328p" ], diff --git a/targets/atsamd21e18a.json b/targets/atsamd21e18a.json index 0fcf50675..92b671c9f 100644 --- a/targets/atsamd21e18a.json +++ b/targets/atsamd21e18a.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m0plus"], "build-tags": ["atsamd21e18a", "atsamd21e18", "atsamd21", "sam"], + "serial": "usb", "linkerscript": "targets/atsamd21.ld", "extra-files": [ "src/device/sam/atsamd21e18a.s" diff --git a/targets/atsamd21g18a.json b/targets/atsamd21g18a.json index 956afba54..db46c9628 100644 --- a/targets/atsamd21g18a.json +++ b/targets/atsamd21g18a.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m0plus"], "build-tags": ["atsamd21g18a", "atsamd21g18", "atsamd21", "sam"], + "serial": "usb", "linkerscript": "targets/atsamd21.ld", "extra-files": [ "src/device/sam/atsamd21g18a.s" diff --git a/targets/atsame54-xpro.json b/targets/atsame54-xpro.json index 631df8cfb..1ab7c4eea 100644 --- a/targets/atsame54-xpro.json +++ b/targets/atsame54-xpro.json @@ -1,6 +1,7 @@ { "inherits": ["atsame54p20a"], "build-tags": ["atsame54_xpro"], + "serial": "usb", "flash-method": "openocd", "openocd-interface": "cmsis-dap", "default-stack-size": 4096 diff --git a/targets/bluepill.json b/targets/bluepill.json index 9f1e4b004..752261f4d 100644 --- a/targets/bluepill.json +++ b/targets/bluepill.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m3"], "build-tags": ["bluepill", "stm32f103", "stm32f1", "stm32"], + "serial": "uart", "linkerscript": "targets/stm32.ld", "extra-files": [ "src/device/stm32/stm32f103.s" diff --git a/targets/circuitplay-bluefruit.json b/targets/circuitplay-bluefruit.json index 24bf5577f..0c1f6ae3b 100644 --- a/targets/circuitplay-bluefruit.json +++ b/targets/circuitplay-bluefruit.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["circuitplay_bluefruit","nrf52840_reset_uf2", "softdevice", "s140v6"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "serial-port": ["acm:239a:8045", "acm:239a:45"], diff --git a/targets/clue-alpha.json b/targets/clue-alpha.json index e2594ea7d..ebe83f79d 100644 --- a/targets/clue-alpha.json +++ b/targets/clue-alpha.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["clue_alpha","nrf52840_reset_uf2", "softdevice", "s140v6"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "CLUEBOOT", diff --git a/targets/esp32.json b/targets/esp32.json index 3559e8920..ded861624 100644 --- a/targets/esp32.json +++ b/targets/esp32.json @@ -3,6 +3,7 @@ "cpu": "esp32", "build-tags": ["esp32", "esp"], "scheduler": "tasks", + "serial": "uart", "linker": "xtensa-esp32-elf-ld", "default-stack-size": 2048, "cflags": [ diff --git a/targets/feather-m4-can.json b/targets/feather-m4-can.json index 190d4d8f9..22222622f 100644 --- a/targets/feather-m4-can.json +++ b/targets/feather-m4-can.json @@ -1,6 +1,7 @@ { "inherits": ["atsame51j19a"], "build-tags": ["feather_m4_can"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "FTHRCANBOOT", diff --git a/targets/feather-m4.json b/targets/feather-m4.json index ccf06ec54..408946297 100644 --- a/targets/feather-m4.json +++ b/targets/feather-m4.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51j19a"], "build-tags": ["feather_m4"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "FEATHERBOOT", diff --git a/targets/feather-nrf52840.json b/targets/feather-nrf52840.json index f0b706186..c334f7065 100644 --- a/targets/feather-nrf52840.json +++ b/targets/feather-nrf52840.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["feather_nrf52840","nrf52840_reset_uf2", "softdevice", "s140v6"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "FTHR840BOOT", diff --git a/targets/feather-stm32f405.json b/targets/feather-stm32f405.json index d3bb1dc9c..3d824d1ed 100644 --- a/targets/feather-stm32f405.json +++ b/targets/feather-stm32f405.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m4"], "build-tags": ["feather_stm32f405", "stm32f405", "stm32f4", "stm32"], + "serial": "uart", "automatic-stack-size": false, "linkerscript": "targets/stm32f405.ld", "extra-files": [ diff --git a/targets/grandcentral-m4.json b/targets/grandcentral-m4.json index 4545dfd9f..7b374c98e 100644 --- a/targets/grandcentral-m4.json +++ b/targets/grandcentral-m4.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51p20a"], "build-tags": ["grandcentral_m4"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "GCM4BOOT", diff --git a/targets/hifive1-qemu.json b/targets/hifive1-qemu.json index 9a50cee64..60fe27a4d 100644 --- a/targets/hifive1-qemu.json +++ b/targets/hifive1-qemu.json @@ -1,6 +1,7 @@ { "inherits": ["fe310"], "build-tags": ["hifive1b", "qemu"], + "serial": "uart", "linkerscript": "targets/hifive1-qemu.ld", "emulator": ["qemu-system-riscv32", "-machine", "sifive_e", "-nographic", "-kernel"] } diff --git a/targets/hifive1b.json b/targets/hifive1b.json index bd561ae0b..1084531b3 100644 --- a/targets/hifive1b.json +++ b/targets/hifive1b.json @@ -1,6 +1,7 @@ { "inherits": ["fe310"], "build-tags": ["hifive1b"], + "serial": "uart", "linkerscript": "targets/hifive1b.ld", "flash-method": "msd", "msd-volume-name": "HiFive", diff --git a/targets/itsybitsy-m4.json b/targets/itsybitsy-m4.json index 9c7a634ba..af4027a4a 100644 --- a/targets/itsybitsy-m4.json +++ b/targets/itsybitsy-m4.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51g19a"], "build-tags": ["itsybitsy_m4"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "serial-port": ["acm:239a:802b", "acm:239a:002b"], diff --git a/targets/itsybitsy-nrf52840.json b/targets/itsybitsy-nrf52840.json index b8637fd00..aab873c18 100644 --- a/targets/itsybitsy-nrf52840.json +++ b/targets/itsybitsy-nrf52840.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["itsybitsy_nrf52840","nrf52840_reset_uf2", "softdevice", "s140v6"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "ITSY840BOOT", diff --git a/targets/lgt92.json b/targets/lgt92.json index 82c603a9b..23bc84dd2 100644 --- a/targets/lgt92.json +++ b/targets/lgt92.json @@ -5,6 +5,7 @@ "build-tags": [ "lgt92" ], + "serial": "uart", "linkerscript": "targets/stm32l072czt6.ld", "flash-method": "openocd", "openocd-interface": "stlink-v2", diff --git a/targets/maixbit.json b/targets/maixbit.json index 21322072a..8f6216162 100644 --- a/targets/maixbit.json +++ b/targets/maixbit.json @@ -1,6 +1,7 @@ { "inherits": ["k210"], "build-tags": ["maixbit"], + "serial": "uart", "linkerscript": "targets/maixbit.ld", "flash-command": "kflash -p {port} --noansi --verbose {bin}" } diff --git a/targets/metro-m4-airlift.json b/targets/metro-m4-airlift.json index a282ac55a..5783a4336 100644 --- a/targets/metro-m4-airlift.json +++ b/targets/metro-m4-airlift.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51j19a"], "build-tags": ["metro_m4_airlift"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "METROM4BOOT", diff --git a/targets/microbit-v2.json b/targets/microbit-v2.json index 33a9392eb..c8c7461c3 100644 --- a/targets/microbit-v2.json +++ b/targets/microbit-v2.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52833"], "build-tags": ["microbit_v2"], + "serial": "uart", "flash-method": "msd", "openocd-interface": "cmsis-dap", "msd-volume-name": "MICROBIT", diff --git a/targets/microbit.json b/targets/microbit.json index 1b677c5d3..a890100da 100644 --- a/targets/microbit.json +++ b/targets/microbit.json @@ -1,6 +1,7 @@ { "inherits": ["nrf51"], "build-tags": ["microbit"], + "serial": "uart", "flash-method": "msd", "openocd-interface": "cmsis-dap", "msd-volume-name": "MICROBIT", diff --git a/targets/nicenano.json b/targets/nicenano.json index 3a406ea5c..b18a0c1ca 100644 --- a/targets/nicenano.json +++ b/targets/nicenano.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["nicenano","nrf52840_reset_uf2", "softdevice", "s140v6"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "NICENANO", diff --git a/targets/nodemcu.json b/targets/nodemcu.json index c1fdbec06..c8c6c4039 100644 --- a/targets/nodemcu.json +++ b/targets/nodemcu.json @@ -1,4 +1,5 @@ { "inherits": ["esp8266"], - "build-tags": ["nodemcu"] + "build-tags": ["nodemcu"], + "serial": "uart" } diff --git a/targets/nrf52840-mdk-usb-dongle.json b/targets/nrf52840-mdk-usb-dongle.json index fa4c72256..34e76b779 100644 --- a/targets/nrf52840-mdk-usb-dongle.json +++ b/targets/nrf52840-mdk-usb-dongle.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["nrf52840_mdk_usb_dongle", "nrf52840_reset_uf2", "softdevice", "s140v6"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "MDK-DONGLE", diff --git a/targets/nrf52840-mdk.json b/targets/nrf52840-mdk.json index 244b3d96d..03528e501 100644 --- a/targets/nrf52840-mdk.json +++ b/targets/nrf52840-mdk.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["nrf52840_mdk"], + "serial": "usb", "flash-method": "openocd", "openocd-interface": "cmsis-dap" } diff --git a/targets/nucleo-f103rb.json b/targets/nucleo-f103rb.json index 1c12af847..723c5eef9 100644 --- a/targets/nucleo-f103rb.json +++ b/targets/nucleo-f103rb.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m3"], "build-tags": ["nucleof103rb", "stm32f103", "stm32f1","stm32"], + "serial": "uart", "linkerscript": "targets/stm32f103rb.ld", "extra-files": [ "src/device/stm32/stm32f103.s" diff --git a/targets/nucleo-f722ze.json b/targets/nucleo-f722ze.json index 25a388b9e..f426b332d 100644 --- a/targets/nucleo-f722ze.json +++ b/targets/nucleo-f722ze.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m7"], "build-tags": ["nucleof722ze", "stm32f7x2", "stm32f7", "stm32"], + "serial": "uart", "linkerscript": "targets/stm32f7x2zetx.ld", "extra-files": [ "src/device/stm32/stm32f7x2.s" diff --git a/targets/nucleo-l031k6.json b/targets/nucleo-l031k6.json index 928dd43dc..eed8f38f0 100644 --- a/targets/nucleo-l031k6.json +++ b/targets/nucleo-l031k6.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m0"], "build-tags": ["nucleol031k6", "stm32l031", "stm32l0x1", "stm32l0", "stm32"], + "serial": "uart", "linkerscript": "targets/stm32l031k6.ld", "extra-files": [ "src/device/stm32/stm32l0x1.s" diff --git a/targets/nucleo-l432kc.json b/targets/nucleo-l432kc.json index f13c8bde4..028b034b0 100644 --- a/targets/nucleo-l432kc.json +++ b/targets/nucleo-l432kc.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m4"], "build-tags": ["nucleol432kc", "stm32l432", "stm32l4x2", "stm32l4", "stm32"], + "serial": "uart", "linkerscript": "targets/stm32l4x2.ld", "extra-files": [ "src/device/stm32/stm32l4x2.s" diff --git a/targets/nucleo-l552ze.json b/targets/nucleo-l552ze.json index 56e286ab5..044b58371 100644 --- a/targets/nucleo-l552ze.json +++ b/targets/nucleo-l552ze.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m33"], "build-tags": ["nucleol552ze", "stm32l552", "stm32l5x2", "stm32l5", "stm32"], + "serial": "uart", "linkerscript": "targets/stm32l5x2xe.ld", "extra-files": [ "src/device/stm32/stm32l552.s" diff --git a/targets/particle-3rd-gen.json b/targets/particle-3rd-gen.json index 2229319e7..ef39a7340 100644 --- a/targets/particle-3rd-gen.json +++ b/targets/particle-3rd-gen.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["particle_3rd_gen"], + "serial": "uart", "flash-method": "openocd", "openocd-interface": "cmsis-dap" } diff --git a/targets/pca10031.json b/targets/pca10031.json index cccae828a..8af365cc8 100644 --- a/targets/pca10031.json +++ b/targets/pca10031.json @@ -1,6 +1,7 @@ { "inherits": ["nrf51"], "build-tags": ["pca10031"], + "serial": "uart", "flash-command": "nrfjprog -f nrf51 --sectorerase --program {hex} --reset", "openocd-interface": "cmsis-dap" } diff --git a/targets/pca10040.json b/targets/pca10040.json index 7685be427..b751b3bd6 100644 --- a/targets/pca10040.json +++ b/targets/pca10040.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52"], "build-tags": ["pca10040"], + "serial": "uart", "flash-method": "openocd", "flash-command": "nrfjprog -f nrf52 --sectorerase --program {hex} --reset", "openocd-interface": "jlink", diff --git a/targets/pca10056.json b/targets/pca10056.json index fc0acaa0a..b604624cf 100644 --- a/targets/pca10056.json +++ b/targets/pca10056.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["pca10056"], + "serial": "uart", "flash-method": "command", "flash-command": "nrfjprog -f nrf52 --sectorerase --program {hex} --reset", "msd-volume-name": "JLINK", diff --git a/targets/pca10059.json b/targets/pca10059.json index 5a8eb8265..b5286e989 100644 --- a/targets/pca10059.json +++ b/targets/pca10059.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["pca10059"], + "serial": "usb", "linkerscript": "targets/pca10059.ld", "binary-format": "nrf-dfu", "flash-command": "nrfutil dfu usb-serial -pkg {zip} -p {port} -b 115200" diff --git a/targets/pico.json b/targets/pico.json index 011d5110f..36e3ba30e 100644 --- a/targets/pico.json +++ b/targets/pico.json @@ -3,6 +3,7 @@ "rp2040" ], "build-tags": ["pico"], + "serial": "uart", "linkerscript": "targets/pico.ld", "extra-files": [ "targets/pico-boot-stage2.S" diff --git a/targets/pinetime-devkit0.json b/targets/pinetime-devkit0.json index adbe874ae..8655769ee 100644 --- a/targets/pinetime-devkit0.json +++ b/targets/pinetime-devkit0.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52"], "build-tags": ["pinetime_devkit0"], + "serial": "uart", "flash-method": "openocd", "flash-command": "nrfjprog -f nrf52 --sectorerase --program {hex} --reset", "openocd-interface": "jlink", diff --git a/targets/pybadge.json b/targets/pybadge.json index b76b32469..15af8f8a9 100644 --- a/targets/pybadge.json +++ b/targets/pybadge.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51j19a"], "build-tags": ["pybadge"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "serial-port": ["acm:239a:8033", "acm:239a:33"], diff --git a/targets/pygamer.json b/targets/pygamer.json index 63dc34a18..03147e08a 100644 --- a/targets/pygamer.json +++ b/targets/pygamer.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51j19a"], "build-tags": ["pygamer"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "PYGAMERBOOT", diff --git a/targets/pyportal.json b/targets/pyportal.json index a26d82f08..abda3ab18 100644 --- a/targets/pyportal.json +++ b/targets/pyportal.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51j20a"], "build-tags": ["pyportal"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "serial-port": ["acm:239a:8035", "acm:239a:35", "acm:239a:8036"], diff --git a/targets/reelboard.json b/targets/reelboard.json index 60aeb1cfd..b6da0a449 100644 --- a/targets/reelboard.json +++ b/targets/reelboard.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52840"], "build-tags": ["reelboard"], + "serial": "uart", "flash-method": "msd", "msd-volume-name": "reel-board", "msd-firmware-name": "firmware.hex", diff --git a/targets/stm32f4disco.json b/targets/stm32f4disco.json index 622c5b0d6..4485c41d3 100644 --- a/targets/stm32f4disco.json +++ b/targets/stm32f4disco.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m4"], "build-tags": ["stm32f4disco", "stm32f407", "stm32f4", "stm32"], + "serial": "uart", "linkerscript": "targets/stm32f407.ld", "extra-files": [ "src/device/stm32/stm32f407.s" diff --git a/targets/teensy36.json b/targets/teensy36.json index c341511ec..253e39704 100644 --- a/targets/teensy36.json +++ b/targets/teensy36.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m4"], "build-tags": ["teensy36", "teensy", "mk66f18", "nxp"], + "serial": "uart", "linkerscript": "targets/nxpmk66f18.ld", "extra-files": [ "src/device/nxp/mk66f18.s", diff --git a/targets/teensy40.json b/targets/teensy40.json index d08b8d1dd..c530003b3 100644 --- a/targets/teensy40.json +++ b/targets/teensy40.json @@ -1,6 +1,7 @@ { "inherits": ["cortex-m7"], "build-tags": ["teensy40", "teensy", "mimxrt1062", "nxp"], + "serial": "uart", "automatic-stack-size": false, "default-stack-size": 4096, "linkerscript": "targets/mimxrt1062-teensy40.ld", diff --git a/targets/wioterminal.json b/targets/wioterminal.json index 093947e16..1f81b928f 100644 --- a/targets/wioterminal.json +++ b/targets/wioterminal.json @@ -1,6 +1,7 @@ { "inherits": ["atsamd51p19a"], "build-tags": ["wioterminal"], + "serial": "usb", "flash-1200-bps-reset": "true", "flash-method": "msd", "msd-volume-name": "Arduino", diff --git a/targets/x9pro.json b/targets/x9pro.json index a9ecc0c83..9b966b4b9 100644 --- a/targets/x9pro.json +++ b/targets/x9pro.json @@ -1,6 +1,7 @@ { "inherits": ["nrf52"], "build-tags": ["x9pro"], + "serial": "uart", "flash-method": "openocd", "flash-command": "nrfjprog -f nrf52 --sectorerase --program {hex} --reset", "openocd-interface": "jlink", |