//go:build circuitplay_express

package machine

// used to reset into bootloader
const resetMagicValue = 0xf01669ef

// GPIO Pins
const (
	D0  = PB09
	D1  = PB08
	D2  = PB02
	D3  = PB03
	D4  = PA28
	D5  = PA14
	D6  = PA05
	D7  = PA15
	D8  = PB23
	D9  = PA06
	D10 = PA07
	D11 = NoPin // does not seem to exist
	D12 = PA02
	D13 = PA17 // PWM available
)

// Analog Pins
const (
	A0  = PA02 // ADC/AIN[0]
	A1  = PA05 // PWM available, also ADC/AIN[5]
	A2  = PA06 // PWM available, also ADC/AIN[6]
	A3  = PA07 // PWM available, also ADC/AIN[7]
	A4  = PB03 // PORTB
	A5  = PB02 // PORTB
	A6  = PB09 // PORTB
	A7  = PB08 // PORTB
	A8  = PA11 // ADC/AIN[19]
	A9  = PA09 // ADC/AIN[17]
	A10 = PA04
)

const (
	LED       = D13
	NEOPIXELS = D8
	WS2812    = D8

	BUTTONA = D4
	BUTTONB = D5
	SLIDER  = D7 // built-in slide switch

	BUTTON  = BUTTONA
	BUTTON1 = BUTTONB

	LIGHTSENSOR = A8
	TEMPSENSOR  = A9
	PROXIMITY   = A10
)

// USBCDC pins (logical UART0)
const (
	USBCDC_DM_PIN = PA24
	USBCDC_DP_PIN = PA25
)

// UART0 pins (logical UART1)
const (
	UART_TX_PIN = PB08 // PORTB
	UART_RX_PIN = PB09 // PORTB
)

// UART1 on the Circuit Playground Express.
var (
	UART1 = &sercomUSART4

	DefaultUART = UART1
)

// I2C pins
const (
	SDA_PIN = PB02 // I2C0 external
	SCL_PIN = PB03 // I2C0 external

	SDA1_PIN = PA00 // I2C1 internal
	SCL1_PIN = PA01 // I2C1 internal
)

// I2C on the Circuit Playground Express.
var (
	I2C0 = sercomI2CM5 // external device
	I2C1 = sercomI2CM1 // internal device
)

// SPI pins (internal flash)
const (
	SPI0_SCK_PIN = PA21 // SCK: SERCOM3/PAD[3]
	SPI0_SDO_PIN = PA20 // SDO: SERCOM3/PAD[2]
	SPI0_SDI_PIN = PA16 // SDI: SERCOM3/PAD[0]
)

// SPI on the Circuit Playground Express.
var SPI0 = sercomSPIM3

// I2S pins
const (
	I2S_SCK_PIN = PA10
	I2S_SDO_PIN = PA08
	I2S_SDI_PIN = NoPin
	I2S_WS_PIN  = NoPin // no WS, instead uses SCK to sync
)

// USB CDC identifiers
const (
	usb_STRING_PRODUCT      = "Adafruit Circuit Playground Express"
	usb_STRING_MANUFACTURER = "Adafruit"
)

var (
	usb_VID uint16 = 0x239A
	usb_PID uint16 = 0x8018
)