path: root/kauf-plug.yaml

# https://esphome.io/guides/configuration-types.html#substitutions
substitutions:

  # substitutions can be changed here if you are using this file directly in the ESPHome dashboard.  The better approach is
  # to incorporate this file as a package using the following packages: configuration, and then overwrite these substitutions
  # in your local yaml file by redefining them.
  #
  # packages:
  #   kauf.plf10: github://KaufHA/PLF10/kauf-plug.yaml
  #

  name: kauf-plug              # **** CHANGE DEVICE NAME TO SOMETHING UNIQUE PER DEVICE.  RENAME YAML FILE TO SAME NAME.    ****
                               # **** USE DASHES (-) INSTEAD OF SPACES OR UNDERSCORE (_).  USE ONLY LOWER CASE LETTERS.     ****
  friendly_name: Kauf Plug     # **** CHANGE FRIENDLY NAME TO SOMETHING UNIQUE PER DEVICE                                   ****

  # https://esphome.io/components/esphome.html#esphome-creators-project
  project_name: Kauf.PLF10
  project_ver_num: "2.069"
  project_ver_let: y

  # https://esphome.io/components/switch/gpio.html?highlight=restore_mode
  sub_restore_mode: RESTORE_DEFAULT_ON  # overwrite to change boot up behavior of relay

  disable_entities:  "true"     # set to "false" to have all entities show up in Home Assistant automatically
  disable_webserver: "false"    # set to "true" to disable the webserver listening on port 80.

  # substitutions for button actions.  on_press and on_release implement a timer scheme with configurable delay.
  # on_hold_30s re-enables the AP and captive portal for the precompiled update binary.
  # any length of hold can be implemented with just on_press and on_release using the following directions.  This
  # is basically how this yaml file works.
  #   * have a delay for the desired hold in the on_press script
  #   * stop the on_press script in the on_release script
  #   * place actions in the on_press script after the delay to perform them while still holding the button
  #   * place actions in the on_release script, with the condition that the on_press script is not running, to
  #     perform them on release of the button.
  sub_on_press:         script_do_nothing  # executes right when button is initially pressed
  sub_on_release:       script_do_nothing  # executes right when button is released
  sub_on_hold_30s:      script_force_ap    # executes right when button has been held for 5s, while button is still being held

  sub_on_turn_on:       script_do_nothing
  sub_on_turn_off:      script_do_nothing

  # an extra script that, if running, will stop the relay from toggling on button release.
  # used to not toggle when WiFi AP is re-enabled on update bin file.
  sub_toggle_check: script_force_ap

  # made this a substitution so that the update bin file and yaml compiled versions can have different defaults
  default_button_config: "Toggle on Press"

  # substitutions for power monitoring calibration.  Allows end users to change calibration in their yaml and still
  # incorporate this file as a package to get all the updates we release.
  current_resistor_val: "0.001"
  voltage_divider_val:  "2401"
  sub_hlw_model:         HLW8012
  power_cal_val1_in:    "0.0"
  power_cal_val1_out:   "0.0"
  power_cal_val2_in:    "333.8"
  power_cal_val2_out:   "60"
  current_cal_val1_in:  "0.0"
  current_cal_val1_out: "0.0"
  current_cal_val2_in:  "0.6"
  current_cal_val2_out: "0.515"
  voltage_cal_val1_in:  "0.0"
  voltage_cal_val1_out: "0.0"
  voltage_cal_val2_in:  "302.1"
  voltage_cal_val2_out: "117.1"

  sub_default_scale_power: "100"
  sub_default_scale_current: "100"
  sub_default_scale_voltage: "100"

  # set default power monitoring update interval in yaml.
  # this will only be effective as long as the select entity is set to "YAML Configured"
  sub_update_interval: 10s
  sub_pm_initial_option: YAML Configured ($sub_update_interval)

  sub_hlw_timeout: 3s

  # for early sensor publishing
  sub_early_publish_percent:           "25"
  sub_early_publish_percent_min_power: "0.5"
  sub_early_publish_absolute:          "16.68" # for PLF10, 1w is approximately 5.56.  16.68 is approximately 3w.

  # GPIO definitions
  sub_pm_sel_pin:   GPIO12
  sub_pm_cf_pin:    GPIO5
  sub_pm_cf1_pin:   GPIO14
  sub_button_pin:   GPIO13
  sub_blue_led_pin: GPIO2
  sub_red_led_pin:  GPIO0
  sub_relay_pin:    GPIO4

  # debounce specifications
  sub_default_debounce: "100"
  sub_min_debounce:     "50"


# https://esphome.io/components/esp8266.html
esp8266:
  board: esp01_1m
  restore_from_flash: true
  early_pin_init: false
  start_free: 76
  global_addr: global_forced_addr


# https://esphome.io/guides/automations.html#global-variables
globals:
  - id: global_forced_addr
    type: int
    restore_value: no
    initial_value: '12345'
  - id: global_press_time
    type: int
    restore_value: no
    initial_value: '0'
  - id: global_has_debounce
    type: boolean
    restore_value: no
    initial_value: "false"


# https://esphome.io/components/esphome.html#adjusting-flash-writes
preferences:
  # setting interval to 5 minutes since this defines writing total daily energy to flash, which will occur
  # every interval length 24/7/365.  Created a specific save script that is executed for things that need
  # to save more quickly.
  flash_write_interval: 5min


# https://esphome.io/components/esphome.html
esphome:
  name: $name

  project:
    name: $project_name
    version: $project_ver_num($project_ver_let)

  on_boot:
    then:
        # implementing on_boot automation as a script makes it run in parallel
        # with any other on_boot scripts.
      - script.execute: script_set_power_leds
      - script.execute: on_wifi_connect

  min_version: 2024.6.0


# https://esphome.io/components/external_components.html
external_components:
  - source:
      type: git
      url: https://github.com/KaufHA/common
      ref: v2024.07.16
    refresh: never


# https://esphome.io/components/wifi.html
wifi:

  # **** ENTER WI-FI CREDENTIALS HERE, USING SECRETS.YAML RECOMMENDED ****
  ssid: initial_ap            # !secret wifi_ssid
  password: asdfasdfasdfasdf  # !secret wifi_password

  # enable wifi ap with ridiculous timeout so it does not normally turn on.
  ap:
    ap_timeout: 2147483647ms  # maximum 32 bit value.  About 3.5 weeks in milliseconds.

  forced_addr: 8
  global_addr: global_forced_addr


# https://esphome.io/components/captive_portal.html
captive_portal:


# https://esphome.io/components/logger.html
logger:


# https://esphome.io/components/api.html
api:
  id: kauf_api


# https://esphome.io/components/ota.html
ota:
  platform: esphome
  on_error:
    - button.press: restart_button


safe_mode:


# https://esphome.io/components/web_server.html
web_server:
  disable: $disable_webserver
  js_url: https://kaufha.com/v2/www.js


# https://esphome.io/components/binary_sensor/index.html
binary_sensor:

    # button input toggles relay and thereby power led
    # https://esphome.io/components/binary_sensor/gpio.html
  - platform: gpio
    id: button_in
    name: $friendly_name Button
    pin:
      number: $sub_button_pin
      mode:
        input: true
        pullup: true
      inverted: true
    on_press:
      - lambda: |-
          // store time of press and clear duration sensor
          id(global_press_time) = millis();
          id(sensor_press_duration).publish_state(0);

          // toggle if configured for toggle on press
          if (id(select_button).state == "Toggle on Press") {
            id(relay).toggle(); }
      - script.execute: $sub_on_press
      - script.execute: script_30s_timer
    on_release:
      - lambda: |-
          // set duration sensor
          id(sensor_press_duration).publish_state(millis() - id(global_press_time) + id(number_debounce).state);

          // toggle if configured on release and toggle check script is not running.
          if (  (id(select_button).state == "Toggle on Release") && !id($sub_toggle_check).is_running() ) {
            id(relay).toggle();
          }
      - script.execute: $sub_on_release
      - script.stop: script_30s_timer
    filters:
      - delayed_on: !lambda return id(number_debounce).state;

    # indicates whether plugged-in device is running based on configurable threshold.
    # https://esphome.io/components/binary_sensor/template.html
  - platform: template
    id: in_use
    name: $friendly_name Device In Use


# https://esphome.io/guides/automations.html#script-component
script:

    # sets LEDs to proper state based on LED configuration and relay state
  - id: script_set_power_leds
    then:
      - lambda: |-
          // if blue led follows power status
          if ( (id(select_bled).state == "Power Status") || (id(select_bled).state == "Error and Power") ) {
            id(blue_led).publish_state(id(relay).state); }

          // if blue led follows inverse of power status
          else if ( (id(select_bled).state == "Invert Power Status") || (id(select_bled).state == "Error and Invert Power") ) {
            id(blue_led).publish_state(!id(relay).state); }

          // if red led follows power status
          if ( (id(select_rled).state == "Power Status") || (id(select_rled).state == "Error and Power") ) {
            id(red_led).publish_state(id(relay).state); }

          // if red led follows inverse of power status
          else if ( (id(select_rled).state == "Invert Power Status") || (id(select_rled).state == "Error and Invert Power") ) {
            id(red_led).publish_state(!id(relay).state); }

      - script.execute: script_save_changes

  - id: blink_status_led
    mode: queued
    then:

      - lambda: |-
          // turn on blue LED if configured for error status
          if ( (id(select_bled).state == "Error Status")  ||
               (id(select_bled).state == "Error and Power") ||
               (id(select_bled).state == "Error and Invert Power") ) {
            id(blue_led).turn_on(); }

          // turn on red LED if configured for error status
          if ( (id(select_rled).state == "Error Status")  ||
               (id(select_rled).state == "Error and Power") ||
               (id(select_rled).state == "Error and Invert Power") ) {
            id(red_led).turn_on(); }

      - delay: 350ms

      - lambda: |-
          // turn off blue LED if configured for error status
          if ( (id(select_bled).state == "Error Status")  ||
               (id(select_bled).state == "Error and Power") ||
               (id(select_bled).state == "Error and Invert Power") ) {
            id(blue_led).turn_off(); }

          // turn off red LED if configured for error status
          if ( (id(select_rled).state == "Error Status")  ||
               (id(select_rled).state == "Error and Power") ||
               (id(select_rled).state == "Error and Invert Power") ) {
            id(red_led).turn_off(); }

      - delay: 1150ms

      - if:
          condition:
            - lambda: return ( ( (App.get_app_state() & STATUS_LED_ERROR) != 0u) || ((App.get_app_state() & STATUS_LED_WARNING) != 0u) );
          then:
            - script.execute: blink_status_led      # repeat as long as error/warning exists
          else:
            - script.execute: script_set_power_leds # done with status LED, restore light power status

  - id: script_setting_reboot
    mode: restart          # only reboot plug settings are static for 10s.  Another change restarts timer.
    then:
      - lambda: ESP_LOGCONFIG("kauf-plug.yaml","Setting change requiring reboot detected, rebooting in 10 seconds to effect change.");
      - delay: 10s
      - button.press: restart_button

  - id: script_30s_timer
    then:
      - delay: !lambda return (30000-id(number_debounce).state);
      - script.execute: $sub_on_hold_30s

  - id: on_wifi_connect
    then:

        # wait until wifi connects
      - wait_until: wifi.connected

      - lambda: |-
          ESP_LOGD("KAUF on_boot","------------------->>>>>>>>>>>>>>>>>   wifi connected, cranking ap timeout back up");
          wifi_wificomponent_id->set_ap_timeout(2147483647);

  - id: script_force_ap
    then:
      - logger.log: "------------------->>>>>>>>>>>>>>>>>   HELD BUTTON 30 SECONDS, FORCING AP"

      # overwrite software defined credentials to force ap to turn on.
      - lambda: wifi::global_wifi_component->save_wifi_sta("initial_ap","asdfasdfasdfasdf");

      # blink LED for 10s then restart to get captive portal to turn on.
      - script.execute: blink_led
      - delay: 10s
      - button.press: restart_button

    # blink LED forever.  Used when button is held to re-enable AP.  Stops blinking because plug restarts.
  - id: blink_led
    mode: queued
    then:
      - switch.toggle: blue_led
      - delay: 333ms
      - script.execute: blink_led

  - id: script_do_nothing
    then:
      - lambda: return;

  - id: script_save_changes
    mode: restart
    then:
      - delay: 3s
      - lambda: global_preferences->sync();


# pwm outputs for LEDs so they can be dimmed
# https://esphome.io/components/output/esp8266_pwm.html
output:
  - platform: esp8266_pwm
    id: blue_led_pwm
    frequency: 200 Hz
    pin: $sub_blue_led_pin
    inverted: true
  - platform: esp8266_pwm
    id: red_led_pwm
    frequency: 200 Hz
    pin: $sub_red_led_pin
    inverted: true


# https://esphome.io/components/switch/index.html
switch:

    # relay output
    # https://esphome.io/components/switch/gpio.html
  - platform: gpio
    id: relay
    name: $friendly_name
    pin: $sub_relay_pin
    entity_category: ''
    forced_hash: 41191675
    forced_addr: 2
    global_addr: global_forced_addr
    restore_mode: $sub_restore_mode
    on_turn_on:
        - script.execute: script_set_power_leds
        - script.execute: $sub_on_turn_on
    on_turn_off:
        - script.execute: script_set_power_leds
        - script.execute: $sub_on_turn_off

    # https://esphome.io/components/switch/template.html
  - platform: template
    id: switch_no_hass
    name: $friendly_name No HASS
    optimistic: true
    entity_category: config
    disabled_by_default: $disable_entities
    icon: mdi:toggle-switch-off-outline
    restore_mode: RESTORE_DEFAULT_ON
    on_turn_on:
      - lambda: |-
          id(kauf_api).set_reboot_timeout(0);  // 0 disables auto rebooting and also new status led blinking.  doesn't stop current status led blinking
          id(kauf_api).status_clear_warning(); // stops current status led blinking, timeout 0 keeps it from restarting
      - script.execute: script_save_changes
    on_turn_off:
      - lambda: id(kauf_api).set_reboot_timeout(900000);
      - script.execute: script_save_changes
    forced_hash: 657159011
    forced_addr: 42
    global_addr: global_forced_addr

  - platform: template
    id: blue_led
    name: $friendly_name Blue LED
    optimistic: true
    entity_category: config
    disabled_by_default: $disable_entities
    icon: mdi:led-outline
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      - lambda: id(blue_led_pwm).set_level(id(blue_led_brightness).state/100);
    on_turn_off:
      - lambda: id(blue_led_pwm).set_level(0.0);
    forced_hash: 1329407616
    forced_addr: 44
    global_addr: global_forced_addr

  - platform: template
    id: red_led
    name: $friendly_name Red LED
    optimistic: true
    entity_category: config
    disabled_by_default: $disable_entities
    icon: mdi:led-outline
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      - lambda: id(red_led_pwm).set_level(id(red_led_brightness).state/100);
    on_turn_off:
      - lambda: id(red_led_pwm).set_level(0.0);
    forced_hash: 261191305
    forced_addr: 48
    global_addr: global_forced_addr

  - platform: template
    id: switch_early_publish
    name: $friendly_name Early Publish
    optimistic: true
    entity_category: config
    disabled_by_default: $disable_entities
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      - lambda: id(hlw_main).enable_early_publish();
    on_turn_off:
      - lambda: id(hlw_main).disable_early_publish();
    forced_hash: 1334841796
    forced_addr: 62
    global_addr: global_forced_addr


# https://esphome.io/components/button/index.html
# https://esphome.io/components/button/restart.html
button:
  - platform: restart
    id: restart_button
    name: $friendly_name Restart Firmware
    entity_category: diagnostic
    disabled_by_default: $disable_entities


# clock input from Home Assistant used to calculate total daily energy
# https://esphome.io/components/time.html#home-assistant-time-source
time:
  - platform: homeassistant
    id: homeassistant_time


# https://esphome.io/components/sensor/index.html
sensor:   # Power monitoring sensors output to Home Assistant

    # https://esphome.io/components/sensor/hlw8012.html
  - platform: kauf_hlw8012
    id: hlw_main
    sel_pin:
      number: $sub_pm_sel_pin
      inverted: True
    cf_pin: $sub_pm_cf_pin
    cf1_pin: $sub_pm_cf1_pin
    current_resistor: $current_resistor_val
    voltage_divider: $voltage_divider_val

    update_interval: $sub_update_interval

    timeout:                         $sub_hlw_timeout
    early_publish_percent:           $sub_early_publish_percent
    early_publish_percent_min_power: $sub_early_publish_percent_min_power
    early_publish_absolute:          $sub_early_publish_absolute

    model: $sub_hlw_model

    power:
      name: $friendly_name Power
      unit_of_measurement: W
      id: wattage
      filters:
        - calibrate_linear:
            - $power_cal_val1_in -> $power_cal_val1_out
            - $power_cal_val2_in -> $power_cal_val2_out
        - lambda: |-
              // filter out extremely large values that are incorrect
              float return_val = x * id(scale_power).state/100.0f;
              if ( return_val > 5000.0f) return {};
              else return return_val;
      on_value:   # set or clear in_use template binary sensor depending on whether power usage is over threshold
        - lambda: id(in_use).publish_state(x >= id(threshold).state);

    current:
      name: $friendly_name Current
      unit_of_measurement: A
      id: current
      filters:
        - calibrate_linear:
            - $current_cal_val1_in -> $current_cal_val1_out
            - $current_cal_val2_in -> $current_cal_val2_out
        - lambda: return x * id(scale_current).state/100.0f;

    voltage:
      name: $friendly_name Voltage
      unit_of_measurement: V
      id: voltage
      filters:
        - calibrate_linear:
            - $voltage_cal_val1_in -> $voltage_cal_val1_out
            - $voltage_cal_val2_in -> $voltage_cal_val2_out
        - lambda: return x * id(scale_voltage).state/100.0f;

    # Reports the total Power so-far each day, resets at midnight
    # https://esphome.io/components/sensor/total_daily_energy.html
  - platform: total_daily_energy
    name: $friendly_name Total Daily Energy
    power_id: wattage
    filters:
        - multiply: 0.001  ## convert Wh to kWh
    unit_of_measurement: kWh
    forced_hash: 1903527169
    forced_addr: 6
    global_addr: global_forced_addr

    # https://esphome.io/components/sensor/uptime.html
  - platform: uptime
    name: $friendly_name Uptime
    update_interval: 60s
    entity_category: diagnostic
    disabled_by_default: $disable_entities

    # https://esphome.io/components/sensor/template.html
  - platform: template
    name: $friendly_name Button Press Duration
    id: sensor_press_duration
    entity_category: diagnostic
    disabled_by_default: $disable_entities
    unit_of_measurement: ms
    icon: mdi:timer-outline


# https://esphome.io/components/number/index.html
# https://esphome.io/components/number/template.html
number:      # used as a threshold for whether the plugged-in devices is running.
  - platform: template
    name: $friendly_name Use Threshold
    min_value: 1
    max_value: 100
    step: 1
    initial_value: 3
    id: threshold
    entity_category: config
    optimistic: true
    restore_value: true
    unit_of_measurement: Watt(s)
    mode: box
    disabled_by_default: $disable_entities
    forced_hash: 3932521563
    forced_addr: 4
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes
    on_value:        # set or clear in_use template binary sensor depending on whether power usage is above threshold
      - lambda: id(in_use).publish_state(id(wattage).state >= x);

  - platform: template
    name: $friendly_name Blue LED Brightness
    min_value: 1
    max_value: 100
    step: 1
    initial_value: 75
    id: blue_led_brightness
    entity_category: config
    optimistic: true
    restore_value: true
    unit_of_measurement: "%"
    mode: slider
    icon: mdi:brightness-percent
    set_action:
      - script.execute: script_save_changes
    on_value:
      - lambda: if ( id(blue_led).state ) id(blue_led_pwm).set_level(x/100);
    forced_hash: 2635887862
    forced_addr: 46
    global_addr: global_forced_addr

  - platform: template
    name: $friendly_name Red LED Brightness
    min_value: 1
    max_value: 100
    step: 1
    initial_value: 75
    id: red_led_brightness
    entity_category: config
    optimistic: true
    restore_value: true
    unit_of_measurement: "%"
    mode: slider
    icon: mdi:brightness-percent
    set_action:
      - script.execute: script_save_changes
    on_value:
      - lambda: if ( id(red_led).state ) id(red_led_pwm).set_level(x/100);
    forced_hash: 4192312897
    forced_addr: 50
    global_addr: global_forced_addr

  - platform: template
    name: $friendly_name Scale Power
    min_value: 50
    max_value: 200
    step: .1
    initial_value: $sub_default_scale_power
    id: scale_power
    entity_category: config
    optimistic: true
    restore_value: true
    unit_of_measurement: "%"
    mode: box
    disabled_by_default: $disable_entities
    forced_hash: 3565176138
    forced_addr: 56
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes
    on_value:   # republish value. Sensor automation applies new scaling factor.
      - lambda: id(wattage).publish_state(id(wattage).get_raw_state());

  - platform: template
    name: $friendly_name Scale Current
    min_value: 50
    max_value: 200
    step: .1
    initial_value: $sub_default_scale_current
    id: scale_current
    entity_category: config
    optimistic: true
    restore_value: true
    unit_of_measurement: "%"
    mode: box
    disabled_by_default: $disable_entities
    forced_hash: 2293595686
    forced_addr: 58
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes
    on_value:   # republish value. Sensor automation applies new scaling factor.
      - lambda: id(current).publish_state(id(current).get_raw_state());

  - platform: template
    name: $friendly_name Scale Voltage
    min_value: 50
    max_value: 200
    step: .1
    initial_value: $sub_default_scale_voltage
    id: scale_voltage
    entity_category: config
    optimistic: true
    restore_value: true
    unit_of_measurement: "%"
    mode: box
    disabled_by_default: $disable_entities
    forced_hash: 254525215
    forced_addr: 60
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes
    on_value:   # republish value. Sensor automation applies new scaling factor.
      - lambda: id(voltage).publish_state(id(voltage).get_raw_state());

  - platform: template
    name: $friendly_name Debounce Time
    min_value: $sub_min_debounce
    max_value: 2000
    step: 1
    initial_value: $sub_default_debounce
    id: number_debounce
    entity_category: config
    optimistic: true
    restore_value: true
    unit_of_measurement: "ms"
    mode: box
    disabled_by_default: $disable_entities
    forced_hash: 2232959069
    forced_addr: 40
    global_addr: global_forced_addr


# https://esphome.io/components/select/index.html
# https://esphome.io/components/select/template.html
select:

  - platform: template
    name: $friendly_name Button Config
    id: select_button
    optimistic: true
    options:
      - Toggle on Press
      - Toggle on Release
      - Don't Toggle
    initial_option: $default_button_config
    restore_value: true
    icon: mdi:circle-double
    entity_category: config
    forced_hash: 3616613943
    forced_addr: 34
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes

  - platform: template
    name: $friendly_name Blue LED Config
    id: select_bled
    optimistic: true
    entity_category: config
    options:
      - Power Status
      - No Automation
      - Invert Power Status
      - Error Status
      - Error and Power
      - Error and Invert Power
    initial_option: Power Status
    restore_value: true
    icon: mdi:led-on
    forced_hash: 3104663617
    forced_addr: 36
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes
    on_value:
      - if:
          condition:
            - lambda: return ( x == "Error Status" );
          then:
            - switch.turn_off: blue_led
      - script.execute: script_set_power_leds

  - platform: template
    name: $friendly_name Red LED Config
    id: select_rled
    optimistic: true
    entity_category: config
    options:
      - Power Status
      - No Automation
      - Invert Power Status
      - Error Status
      - Error and Power
      - Error and Invert Power
    initial_option: Error Status
    restore_value: true
    icon: mdi:led-on
    forced_hash: 261191305
    forced_addr: 38
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes
    on_value:
      - if:
          condition:
            - lambda: return ( x == "Error Status" );
          then:
            - switch.turn_off: red_led
      - script.execute: script_set_power_leds

  # change update interval for power monitoring sensors
  - platform: template
    name: $friendly_name Monitoring Update Interval
    id: select_monitor_interval
    optimistic: true
    options:
      - 60s
      - 30s
      - 10s
      - 5s
      - 2s
      - YAML Configured ($sub_update_interval)
    initial_option: $sub_pm_initial_option
    restore_value: true
    icon: mdi:wrench-clock
    entity_category: config
    disabled_by_default: $disable_entities
    forced_hash: 1025003091
    forced_addr: 0
    global_addr: global_forced_addr
    set_action:
      - script.execute: script_save_changes
      - script.execute: script_setting_reboot
    on_value:
      - lambda: |-
          if      ( x == "60s" ) { id(hlw_main).set_update_interval(60000); }
          else if ( x == "30s" ) { id(hlw_main).set_update_interval(30000); }
          else if ( x == "10s" ) { id(hlw_main).set_update_interval(10000); }
          else if ( x == "5s"  ) { id(hlw_main).set_update_interval(5000); }
          else if ( x == "2s"  ) { id(hlw_main).set_update_interval(2000); }

  - platform: template
    name: $friendly_name Boot State
    id: select_boot_state
    optimistic: true
    options:
      - "Restore Power Off State"
      - "Invert Power Off State"
      - "Always On"
      - "Always Off"
      - "YAML Configured ($sub_restore_mode)"
    initial_option: "Restore Power Off State"
    restore_value: true
    icon: mdi:restart-alert
    entity_category: config
    forced_hash: 2390278151
    forced_addr: 74
    global_addr: global_forced_addr
    on_value:
      - lambda: |-
          if ( x == "Restore Power Off State")
            relay->set_restore_mode(SWITCH_RESTORE_DEFAULT_OFF);
          else if ( x == "Invert Power Off State")
            relay->set_restore_mode(SWITCH_RESTORE_INVERTED_DEFAULT_OFF);
          else if ( x == "Always On")
            relay->set_restore_mode(SWITCH_ALWAYS_ON);
          else if ( x == "Always Off")
            relay->set_restore_mode(SWITCH_ALWAYS_OFF);
          else
            relay->set_restore_mode(SWITCH_$sub_restore_mode);

          // republish state so it gets saved if necessary
          // but make sure relay already set up, don't want to publish here on boot
          if ( id(relay).is_setup() ) id(relay).publish_state(id(relay).state, true);

      - script.execute: script_save_changes


# Send IP Address to HA
# https://esphome.io/components/text_sensor/wifi_info.html
text_sensor:
  - platform: wifi_info
    ip_address:
      name: $friendly_name IP Address
      disabled_by_default: $disable_entities


# emulate status_led
# https://esphome.io/guides/automations.html#interval-component
interval:
  - interval: 5s
    then:
    - lambda: |-
        if ( ( ((App.get_app_state() & STATUS_LED_ERROR  ) != 0u) ||
               ((App.get_app_state() & STATUS_LED_WARNING) != 0u) )
            && !id(blink_status_led).is_running() )
          id(blink_status_led).execute();


# Current reserved flash memory:
# 00-01: Power Monitoring Mode
# 02-03: Relay output
# 04-05: Use Threshold
# 06-07: Total Daily Energy
# 08-33: Wi-Fi Credentials
# 34-35: Button Config select entity
# 36-37: Blue LED select entity
# 38-39: Red LED select entity
# 40-41: Debounce number entity
# 42-43: No HASS switch
# 44-45: Blue LED
# 46-47: Blue LED Brightness
# 48-49: Red LED
# 50-51: Red LED Brightness
# 56-57: Scale Power
# 58-59: Scale Current
# 60-61: Scale Voltage
# 62-63: Early Publish Switch
# 74-75: Boot State select entity