move configs to subdir

1 files changed, 203 insertions, 0 deletions

diff --git a/config/kauf-plf12-minimal.yaml b/config/kauf-plf12-minimal.yaml
new file mode 100644
index 0000000..48dcd3f
--- /dev/null
+++ b/config/kauf-plf12-minimal.yaml
@@ -0,0 +1,203 @@
+# https://esphome.io/guides/configuration-types.html#substitutions
+substitutions:
+
+  name: kauf-plug              # **** CHANGE DEVICE NAME TO SOMETHING UNIQUE PER DEVICE.  RENAME YAML FILE TO SAME NAME.    ****
+                               # **** USE DASHES (-) INSTEAD OF SPACES OR UNDERSCORE (_).  USE ONLY LOWER CASE LETTERS.     ****
+
+  friendly_name: Kauf Plug     # **** CHANGE FRIENDLY NAME TO SOMETHING UNIQUE PER DEVICE ****
+
+  # substitutions for power monitoring calibration.  Allows end users to change calibration in their yaml and still
+  # incorporate this file as a package to get all the updates we release.
+  voltage_divider_val:  "2001"
+  sub_hlw_model:         BL0937
+  current_resistor_val: "0.001"
+  power_cal_val1_in:    "0.0"
+  power_cal_val1_out:   "0.0"
+  power_cal_val2_in:    "879.4"
+  power_cal_val2_out:   "750"
+  current_cal_val1_in:  "0.0"
+  current_cal_val1_out: "0.0"
+  current_cal_val2_in:  "6.8"
+  current_cal_val2_out: "3.5"
+  voltage_cal_val1_in:  "0.0"
+  voltage_cal_val1_out: "0.0"
+  voltage_cal_val2_in:  "132.7"
+  voltage_cal_val2_out: "119.1"
+
+  # set power monitoring mode in yaml, selecting the "yaml_configured" option in the select entity will cause these
+  # values to be used after next reboot.
+  # https://esphome.io/components/sensor/hlw8012.html#configuration-variables
+  sub_change_mode_every: "1"
+  sub_update_interval: 10s
+  sub_initial_mode: CURRENT
+
+  # GPIO definitions
+  sub_red_led_pin:  GPIO1
+  sub_button_pin:   GPIO3
+  sub_pm_cf_pin:    GPIO4
+  sub_pm_cf1_pin:   GPIO5
+  sub_blue_led_pin: GPIO12
+  sub_relay_pin:    GPIO13
+  sub_pm_sel_pin:   GPIO14
+
+# https://esphome.io/components/esphome.html
+esphome:
+
+  name: $name
+
+  # https://esphome.io/components/esphome.html#esphome-creators-project
+  project:
+    name: "Kauf.PLF12"
+    version: "2.02(m)"
+
+
+# https://esphome.io/components/esp8266.html
+esp8266:
+  board: esp01_1m
+  restore_from_flash: true
+  early_pin_init: false
+
+
+# https://esphome.io/components/wifi.html
+wifi:
+
+  # **** ENTER WI-FI CREDENTIALS HERE, USING SECRETS.YAML RECOMMENDED ****
+  ssid: initial_ap           # !secret my_wifi_ssid
+  password: asdfasdfasdfasdf # !secret my_wifi_pass
+
+  # default is 20, 17 is recommended.
+  output_power: 17
+
+  # using fast_connect as default since it is required for hidden networks.
+  # feel free to change or override.
+  fast_connect: true
+
+  ap:
+
+
+captive_portal:   # https://esphome.io/components/captive_portal.html
+web_server:       # https://esphome.io/components/web_server.html
+logger:           # https://esphome.io/components/logger.html
+api:              # https://esphome.io/components/api.html
+ota:              # https://esphome.io/components/ota.html
+
+
+# https://esphome.io/components/status_led.html
+# red led, blink when not connected to wifi or Home Assistant
+status_led:
+    pin:
+      number: $sub_red_led_pin
+      inverted: true
+
+
+# https://esphome.io/components/binary_sensor/index.html
+binary_sensor:
+
+    # button input toggles relay and thereby blue led
+    # https://esphome.io/components/binary_sensor/gpio.html
+  - platform: gpio
+    id: button
+    name: $friendly_name Button
+    pin:
+      number: $sub_button_pin
+      mode:
+        input: true
+        pullup: true
+      inverted: true
+
+    filters:
+      - delayed_on: 50ms
+
+    on_press:
+      then:
+        switch.toggle: relay
+
+
+# https://esphome.io/components/switch/index.html
+# https://esphome.io/components/switch/gpio.html
+switch:
+
+    # blue LED follows relay power state
+  - platform: gpio
+    id: blue_led
+    pin:
+      number: $sub_blue_led_pin
+      inverted: true
+    restore_mode: RESTORE_DEFAULT_ON
+
+    # relay output
+  - platform: gpio
+    id: relay
+    name: $friendly_name
+    pin: $sub_relay_pin
+    restore_mode: RESTORE_DEFAULT_ON
+
+    # automatically make blue led equal relay state
+    on_turn_on:
+      - switch.turn_on: blue_led
+    on_turn_off:
+      - switch.turn_off: blue_led
+
+
+# clock input from Home Assistant used to calculate total daily energy
+# https://esphome.io/components/time.html#home-assistant-time-source
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+
+# https://esphome.io/components/sensor/index.html
+sensor:   # Power monitoring sensors output to Home Assistant
+
+    # https://esphome.io/components/sensor/hlw8012.html
+  - platform: hlw8012
+    id: hlw_main
+    sel_pin:
+      number: $sub_pm_sel_pin
+      inverted: True
+    cf_pin: $sub_pm_cf_pin
+    cf1_pin: $sub_pm_cf1_pin
+    current_resistor: $current_resistor_val
+    voltage_divider: $voltage_divider_val
+
+    change_mode_every: $sub_change_mode_every
+    update_interval: $sub_update_interval
+    initial_mode: $sub_initial_mode
+
+    model: $sub_hlw_model
+
+    power:
+      name: ${friendly_name} Power
+      unit_of_measurement: W
+      id: wattage
+      filters:
+        - calibrate_linear:
+            - $power_cal_val1_in -> $power_cal_val1_out
+            - $power_cal_val2_in -> $power_cal_val2_out
+
+    current:
+      name: ${friendly_name} Current
+      unit_of_measurement: A
+      id: current
+      filters:
+        - calibrate_linear:
+            - $current_cal_val1_in -> $current_cal_val1_out
+            - $current_cal_val2_in -> $current_cal_val2_out
+
+    voltage:
+      name: ${friendly_name} Voltage
+      unit_of_measurement: V
+      id: voltage
+      filters:
+        - calibrate_linear:
+            - $voltage_cal_val1_in -> $voltage_cal_val1_out
+            - $voltage_cal_val2_in -> $voltage_cal_val2_out
+
+    # Reports the total Power so-far each day, resets at midnight
+    # https://esphome.io/components/sensor/total_daily_energy.html
+  - platform: total_daily_energy
+    name: ${friendly_name} Total Daily Energy
+    power_id: wattage
+    filters:
+        - multiply: 0.001  ## convert Wh to kWh
+    unit_of_measurement: kWh