Add warning for Tip Shorted to translations

1 files changed, 121 insertions, 41 deletions

diff --git a/Translations/translations_definitions.json b/Translations/translations_definitions.json
index 96d237b7..4d2051d3 100644
--- a/Translations/translations_definitions.json
+++ b/Translations/translations_definitions.json
@@ -1,5 +1,6 @@
 {
-    "messagesWarn": [{
+    "messagesWarn": [
+        {
             "id": "CJCCalibrationDone",
             "description": "Confirmation message indicating CJC calibration is complete."
         },
@@ -17,7 +18,9 @@
         },
         {
             "id": "NoPowerDeliveryMessage",
-            "include": ["POW_PD"],
+            "include": [
+                "POW_PD"
+            ],
             "description": "The IC required for USB-PD could not be communicated with. This is an error warning that USB-PD WILL NOT FUNCTION. Generally indicative of either a hardware or software issues."
         },
         {
@@ -35,7 +38,12 @@
         {
             "id": "WarningThermalRunaway",
             "description": "Warning text shown when the software has disabled the heater as a safety precaution as the temperature reading didn't react as expected."
-        }, {
+        },
+        {
+            "id": "WarningTipShorted",
+            "description": "Warning text shown when the software has detected that the users tip is likely shorted."
+        },
+        {
             "id": "SettingsCalibrationWarning",
             "description": "Confirmation message shown before performing an offset calibration. Should warn the user to make sure tip and handle are at the same temperature."
         },
@@ -50,50 +58,66 @@
         {
             "id": "UVLOWarningString",
             "maxLen": 8,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "Warning text shown when the unit turns off due to undervoltage in simple mode."
         },
         {
             "id": "UndervoltageString",
             "maxLen": 15,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "Warning text shown when the unit turns off due to undervoltage in advanced mode."
         },
         {
             "id": "InputVoltageString",
             "maxLen": 11,
             "note": "Preferably end with a space",
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "Prefix text for 'Input Voltage' shown before showing the input voltage reading."
         },
         {
             "id": "ProfilePreheatString",
             "maxLen": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Shown in profile mode while preheating"
         },
         {
             "id": "ProfileCooldownString",
             "maxLen": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Shown in profile mode while cooling down"
         },
         {
             "id": "SleepingSimpleString",
             "maxLen": 4,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "The text shown to indicate the unit is in sleep mode when the advanced view is NOT on."
         },
         {
             "id": "SleepingAdvancedString",
             "maxLen": 15,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "The text shown to indicate the unit is in sleep mode when the advanced view is turned on."
         },
         {
             "id": "SleepingTipAdvancedString",
             "maxLen": 6,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "The prefix text shown before tip temperature when the unit is sleeping with advanced view on."
         },
         {
@@ -109,11 +133,14 @@
         {
             "id": "TooHotToStartProfileWarning",
             "default": "Too hot to\nstart profile",
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Shown when profile mode is started while the device is too hot."
         }
     ],
-    "characters": [{
+    "characters": [
+        {
             "id": "SettingRightChar",
             "len": 1,
             "description": "Shown for fixed Right-handed display rotation."
@@ -187,11 +214,15 @@
             "description": "Shown when the locking mode is set to lock all buttons."
         }
     ],
-    "menuGroups": [{
+    "menuGroups": [
+        {
             "id": "PowerMenu",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["POW_DC", "POW_QC"],
+            "include": [
+                "POW_DC",
+                "POW_QC"
+            ],
             "description": "Menu for settings related to power. Main settings to do with the input voltage."
         },
         {
@@ -219,39 +250,50 @@
             "description": "Advanced settings. Misc catchall for settings that don't fit anywhere else or settings that require some thought before use."
         }
     ],
-    "menuOptions": [{
+    "menuOptions": [
+        {
             "id": "DCInCutoff",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "When the device is powered by a battery, this adjusts the low voltage threshold for when the unit should turn off the heater to protect the battery."
         },
         {
             "id": "MinVolCell",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["POW_DC"],
+            "include": [
+                "POW_DC"
+            ],
             "description": "When powered by a battery, this adjusts the minimum voltage per cell before shutdown. (This is multiplied by the cell count.)"
         },
         {
             "id": "QCMaxVoltage",
             "maxLen": 8,
             "maxLen2": 15,
-            "include": ["POW_QC"],
+            "include": [
+                "POW_QC"
+            ],
             "description": "This adjusts the maximum voltage the QC negotiation will adjust to. Does NOT affect USB-PD. Should be set safely based on the current rating of your power supply."
         },
         {
             "id": "PDNegTimeout",
             "maxLen": 8,
             "maxLen2": 15,
-            "include": ["POW_PD"],
+            "include": [
+                "POW_PD"
+            ],
             "description": "How long until firmware stops trying to negotiate for USB-PD and tries QC instead. Longer times may help dodgy / old PD adapters, faster times move onto PD quickly. Units of 100ms. Recommended to keep small values."
         },
         {
             "id": "PDVpdo",
             "maxLen": 7,
             "maxLen2": 15,
-            "include": ["POW_PD"],
+            "include": [
+                "POW_PD"
+            ],
             "description": "Enabled PPS & EPR modes."
         },
         {
@@ -288,98 +330,126 @@
             "id": "ProfilePhases",
             "maxLen": 6,
             "maxLen2": 13,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "set the number of phases for profile mode."
         },
         {
             "id": "ProfilePreheatTemp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Preheat to this temperature at the start of profile mode."
         },
         {
             "id": "ProfilePreheatSpeed",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "How fast the temperature is allowed to rise during the preheat phase at the start of profile mode."
         },
         {
             "id": "ProfilePhase1Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 1 of profile mode."
         },
         {
             "id": "ProfilePhase1Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 1 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase2Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 2 of profile mode."
         },
         {
             "id": "ProfilePhase2Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 2 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase3Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 3 of profile mode."
         },
         {
             "id": "ProfilePhase3Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 3 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase4Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 5 of profile mode."
         },
         {
             "id": "ProfilePhase4Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfilePhase5Temp",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Target temperature for the end of phase 5 of profile mode."
         },
         {
             "id": "ProfilePhase5Duration",
             "maxLen": 4,
             "maxLen2": 9,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "Duration of phase 5 of profile mode. The phase might actually take longer if it takes longer to reach the target temperature."
         },
         {
             "id": "ProfileCooldownSpeed",
             "maxLen": 5,
             "maxLen2": 11,
-            "include": ["PROFILE_SUPPORT"],
+            "include": [
+                "PROFILE_SUPPORT"
+            ],
             "description": "How fast the temperature is allowed to drop during the cooldown phase at the end of profile mode."
         },
         {
@@ -392,14 +462,18 @@
             "id": "SleepTemperature",
             "maxLen": 4,
             "maxLen2": 9,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "Temperature the device will drop down to while asleep. Typically around halfway between off and soldering temperature."
         },
         {
             "id": "SleepTimeout",
             "maxLen": 4,
             "maxLen2": 9,
-            "exclude": ["NO_SLEEP_MODE"],
+            "exclude": [
+                "NO_SLEEP_MODE"
+            ],
             "description": "How long of a period without movement / button-pressing is required before the device drops down to the sleep temperature."
         },
         {
@@ -412,7 +486,9 @@
             "id": "HallEffSensitivity",
             "maxLen": 6,
             "maxLen2": 13,
-            "include": ["HALL_SENSOR"],
+            "include": [
+                "HALL_SENSOR"
+            ],
             "description": "If the unit has a hall effect sensor (Pinecil), this adjusts how sensitive it is at detecting a magnet to put the device into sleep mode."
         },
         {
@@ -425,7 +501,9 @@
             "id": "DisplayRotation",
             "maxLen": 6,
             "maxLen2": 13,
-            "exclude": ["NO_DISPLAY_ROTATE"],
+            "exclude": [
+                "NO_DISPLAY_ROTATE"
+            ],
             "description": "If the display should rotate automatically or if it should be fixed for left- or right-handed mode."
         },
         {
@@ -492,7 +570,9 @@
             "id": "BluetoothLE",
             "maxLen": 7,
             "maxLen2": 15,
-            "include": ["BLE_ENABLED"],
+            "include": [
+                "BLE_ENABLED"
+            ],
             "description": "Should BLE be enabled at boot time."
         },
         {
@@ -544,4 +624,4 @@
             "description": "Changes the device language on multi-lingual builds."
         }
     ]
-}
+}
\ No newline at end of file