aboutsummaryrefslogtreecommitdiffhomepage
diff options
context:
space:
mode:
Diffstat
-rw-r--r--BatteryIcon.bmpbin0 -> 630 bytes
-rw-r--r--workspace/ts100/inc/Font.h38
-rw-r--r--workspace/ts100/inc/Oled.h5
-rw-r--r--workspace/ts100/src/Modes.c33
-rw-r--r--workspace/ts100/src/Oled.c12
-rw-r--r--workspace/ts100/src/Settings.c2
6 files changed, 74 insertions, 16 deletions
diff --git a/BatteryIcon.bmp b/BatteryIcon.bmp
new file mode 100644
index 00000000..8a00f31a
--- /dev/null
+++ b/BatteryIcon.bmp
Binary files differ
diff --git a/workspace/ts100/inc/Font.h b/workspace/ts100/inc/Font.h
index f95590ab..fb36ed03 100644
--- a/workspace/ts100/inc/Font.h
+++ b/workspace/ts100/inc/Font.h
@@ -9,7 +9,9 @@
#ifndef FONT_H_
#define FONT_H_
-
+/*
+ * Remember screen is LSB at the top, MSB at the bottom of the strip!
+ */
#define FONT_WIDTH 12 /*How many pixels wide the font is*/
const uint8_t FONT[]={
0x00,0xF0,0xFC,0x0E,0x82,0xC2,0x62,0x1E,0xFC,0xF0,0x00,0x00,
@@ -95,8 +97,42 @@ const uint8_t FONT[]={
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x0F,0x0F,0x0F,0x0F,0x00,0x00,0x00,0x00,/*.*/
+
};
+const uint8_t extendedFont[] = {
+ 0x00,0x00,0xF8,0x08,0x0E,0x02,0x02,0x0E,0x08,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x40,0x40,0x40,0x40,0x40,0x40,0x7F,0x00,0x00,/*Battery Empty*/
+
+ 0x00,0x00,0xF8,0x08,0x0E,0x02,0x02,0x0E,0x08,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x60,0x60,0x60,0x60,0x60,0x60,0x7F,0x00,0x00,/*Battery 1*/
+
+ 0x00,0x00,0xF8,0x08,0x0E,0x02,0x02,0x0E,0x08,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x70,0x70,0x70,0x70,0x70,0x70,0x7F,0x00,0x00,/*Battery 2*/
+
+ 0x00,0x00,0xF8,0x08,0x0E,0x02,0x02,0x0E,0x08,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x78,0x78,0x78,0x78,0x78,0x78,0x7F,0x00,0x00,/*Battery 3*/
+ 0x00,0x00,0xF8,0x08,0x0E,0x02,0x02,0x0E,0x08,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x7F,0x00,0x00,/*Battery 4*/
+
+ 0x00,0x00,0xF8,0x08,0x0E,0x02,0x02,0x0E,0x08,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x7E,0x7E,0x7E,0x7E,0x7E,0x7E,0x7F,0x00,0x00,/*Battery 5*/
+
+ 0x00,0x00,0xF8,0x08,0x0E,0x02,0x02,0x0E,0x08,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x00,0x00,/*Battery 6*/
+
+ 0x00,0x00,0xF8,0x88,0x8E,0x82,0x82,0x8E,0x88,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x00,0x00,/*Battery 7*/
+
+ 0x00,0x00,0xF8,0xC8,0xCE,0xC2,0xC2,0xCE,0xC8,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x00,0x00,/*Battery 8*/
+
+ 0x00,0x00,0xF8,0xE8,0xEE,0xE2,0xE2,0xEE,0xE8,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x00,0x00,/*Battery 9*/
+
+ 0x00,0x00,0xF8,0xF8,0xFE,0xF2,0xF2,0xFE,0xF8,0xF8,0x00,0x00,
+ 0x00,0x00,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x00,0x00,/*Battery 10*/
+};
const uint8_t Iron_Base[] ={
0x00,0x20,0x60,0x60,0x60,0x60,0x60,0x60,0x90,0x90,0x90,0x90,
0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,0x90,
diff --git a/workspace/ts100/inc/Oled.h b/workspace/ts100/inc/Oled.h
index 8b896d1e..664e933b 100644
--- a/workspace/ts100/inc/Oled.h
+++ b/workspace/ts100/inc/Oled.h
@@ -14,16 +14,17 @@
void Oled_DisplayOn(void);
void Oled_DisplayOff(void);
-u8* Oled_DrawArea(u8 x0, u8 y0, u8 wide, u8 high, u8* ptr);
+const u8* Oled_DrawArea(u8 x0, u8 y0, u8 wide, u8 high,const u8* ptr);
void Set_ShowPos(u8 x, u8 y);
void Oled_DisplayFlip();
void GPIO_Init_OLED(void);
void Init_Oled(uint8_t leftHanded);
-u8* Data_Command(u8 len, u8* ptr);
+const u8* Data_Command(u8 len,const u8* ptr);
void Clear_Screen(void);//Clear the screen
/*Functions for writing to the screen*/
void OLED_DrawString(const char* string, const uint8_t length);
void OLED_DrawChar(char c, uint8_t x);
+void OLED_DrawExtendedChar(uint8_t id, uint8_t x);
void OLED_DrawTwoNumber(uint8_t in, uint8_t x);
void OLED_BlankSlot(uint8_t xStart,uint8_t width);
void OLED_DrawThreeNumber(uint16_t in, uint8_t x);
diff --git a/workspace/ts100/src/Modes.c b/workspace/ts100/src/Modes.c
index c673d3c9..d3311421 100644
--- a/workspace/ts100/src/Modes.c
+++ b/workspace/ts100/src/Modes.c
@@ -6,7 +6,7 @@
*/
#include "Modes.h"
const char *SettingsLongNames[] = {
- " Power source. Sets cutoff voltage. <DC 10V> <S 3.5V per cell>",
+ " Power source. Sets cutoff voltage. <DC 10V> <S 3.3V per cell>",
" Sleep Temperature <C>", " Sleep Timeout <Minutes>",
" Shutdown Timeout <Minutes>",
" Motion Sensitivity <0.Off 1.least sensitive 9.most sensitive>",
@@ -157,7 +157,7 @@ void ProcessUI() {
case SLEEP_TIME:
++systemSettings.SleepTime; //Go up 1 minute at a time
if (systemSettings.SleepTime > 30)
- systemSettings.SleepTime = 1;//cant set time over 30 mins
+ systemSettings.SleepTime = 1;//can't set time over 30 mins
//Remember that ^ is the time of no movement
break;
case SHUTDOWN_TIME:
@@ -411,12 +411,27 @@ void DrawUI() {
lastOLEDDrawTime = millis();
//Now draw symbols
if (StatusFlags == 8)
- OLED_DrawChar('B', 3);
- else
- OLED_DrawChar(' ', 3);
-
+ OLED_DrawChar('B', 4);
+ else {
+ OLED_DrawChar(' ', 4);
+ }
+ //Draw in battery symbol if desired
+ if (systemSettings.cutoutSetting) {
+ //User is on a lithium battery
+ //we need to calculate which of the 10 levels they are on
+ uint8_t cellCount = systemSettings.cutoutSetting + 2;
+ uint16_t cellV = readDCVoltage(systemSettings.voltageDiv)
+ / cellCount;
+ //Should give us approx cell voltage X10
+ //Range is 42 -> 33 = 9 steps therefore we will use battery 1-10
+ if (cellV < 33)
+ cellV = 33;
+ cellV -= 33; //Should leave us a number of 0-9
+ OLED_DrawExtendedChar(cellV + 1, 5);
+ } else {
+ OLED_DrawChar(' ', 5);
+ }
OLED_BlankSlot(6 * 12 + 16, 24 - 16);//blank out the tail after the arrows
- OLED_BlankSlot(4 * 12 + 16, 24 - 16);//blank out the tail after the temp
if (getIronTimer() == 0
&& (temp / 10) > (systemSettings.SolderingTemp / 10)) {
//Cooling
@@ -430,9 +445,9 @@ void DrawUI() {
}
}
if (systemSettings.displayTempInF) {
- OLED_DrawSymbol(4, 1);
+ OLED_DrawChar('F', 3);
} else {
- OLED_DrawSymbol(4, 0);
+ OLED_DrawChar('C', 3);
}
}
diff --git a/workspace/ts100/src/Oled.c b/workspace/ts100/src/Oled.c
index c584a0d5..abbb7c01 100644
--- a/workspace/ts100/src/Oled.c
+++ b/workspace/ts100/src/Oled.c
@@ -77,7 +77,7 @@ void Oled_DisplayFlip() {
Input: number of bytes to write, array to write
Output:
*/
-u8* Data_Command(u8 length, u8* data) {
+const u8* Data_Command(u8 length,const u8* data) {
int i;
u8 tx_data[129];
//here are are inserting the data write command at the beginning
@@ -107,7 +107,7 @@ void Set_ShowPos(u8 x, u8 y) {
Inputs:(x,y) start point, (width,height) of enclosing rect, pointer to data
Output: pointer to the last byte written out
*******************************************************************************/
-u8* Oled_DrawArea(u8 x0, u8 y0, u8 wide, u8 high, u8* ptr) {
+const u8* Oled_DrawArea(u8 x0, u8 y0, u8 wide, u8 high,const u8* ptr) {
u8 m, n, y;
n = y0 + high;
@@ -174,7 +174,7 @@ void Clear_Screen(void) {
/*
* Draws a string onto the screen starting at the left
*/
-void OLED_DrawString(const char* string,const uint8_t length) {
+void OLED_DrawString(const char* string, const uint8_t length) {
for (uint8_t i = 0; i < length; i++) {
OLED_DrawChar(string[i], i);
}
@@ -209,7 +209,13 @@ void OLED_DrawChar(char c, uint8_t x) {
Oled_DrawArea(x, 0, FONT_WIDTH, 16, (u8*) ptr);
}
+void OLED_DrawExtendedChar(uint8_t id, uint8_t x) {
+ u8* ptr = (u8*) extendedFont;
+ ptr += (id) * (FONT_WIDTH * 2);
+ x *= FONT_WIDTH; //convert to a x coordinate
+ Oled_DrawArea(x, 0, FONT_WIDTH, 16, (u8*) ptr);
+}
void OLED_BlankSlot(uint8_t xStart, uint8_t width) {
u8* ptr = (u8*) FONT;
ptr += (36) * (FONT_WIDTH * 2);
diff --git a/workspace/ts100/src/Settings.c b/workspace/ts100/src/Settings.c
index 38e7b008..d08bf121 100644
--- a/workspace/ts100/src/Settings.c
+++ b/workspace/ts100/src/Settings.c
@@ -50,7 +50,7 @@ uint8_t lookupVoltageLevel(uint8_t level) {
if (level == 0)
return 100; //10V since iron does not function below this
else
- return (level * 35) + (35 * 2);
+ return (level * 33) + (33 * 2);
}
void resetSettings() {
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 05:45:58 +0000