1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
[](https://github.com/Ralim/IronOS/actions/workflows/push.yml)
[](https://github.com/Ralim/IronOS)
[](https://github.com/Ralim/IronOS/graphs/contributors)
[](https://github.com/Ralim/IronOS/releases/latest)
# IronOS - Open Source Flexible Firmware for Soldering Hardware
_This repository was formerly known as TS100, it's the same great code. Just with more supported devices._
Originally conceived as an alternative firmware for the _TS100_, this firmware has evolved into a complex soldering hardware control firmware.
The firmware implements all of the standard features of a _smart_ soldering hardware, with lots of little extras and tweaks.
I highly recommend reading the installation guide fully when installing on your device. And after install just explore the settings menu.
For soldering hardware that is designed to be powered by _smart_ power sources such as _PD_ or _QC_, the firmware supports settings around the negotiated power and voltage.
For soldering hardware that is designed to be powered by batteries (_TS100_ & _Pinecil_), settings for a cutoff voltage for battery protection are supported.
Currently **31** languages are supported. When downloading the firmware for your soldering hardware, take note of the _language code_ in the file name.
This project is considered feature complete for use on a daily basis, _so please suggest any feature improvements you would like!_
_This firmware does **NOT** support the USB port while running for changing settings (this is done through the onscreen menu only). Custom logos are edited on a computer and flashed in the same manner as firmware._
## Supported Hardware
| Device | DC | QC | PD | EPR | BLE | Tip Sense | Recommended Purchase | Notes |
| :------------: | :-: | :-: | :-: | :-: | :-: | :-------: | :------------------: | :-------------------------------------: |
| Miniware MHP30 | ❌ | ❌ | ✔️ | ❌ | ❌ | ✔️ | ✔️ | |
| Pinecil V1 | ✔️ | ✔️ | ✔️ | ❌ | ❌ | ❌ | ❌ \* | |
| Pinecil V2 | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | |
| Miniware TS101 | ✔️ | ❌ | ✔️ | ✔️ | ❌ | ✔️ | ✔️ | Full OLED resolution not yet supported. |
| Sequre S60 | ❌ | ❌ | ✔️ | ❌ | ❌ | ❌ | ✔️ | Full OLED resolution not yet supported. |
| Sequre S60P | ❌ | ❌ | ✔️ | ❌ | ❌ | ❌ | ✔️ | Full OLED resolution not yet supported. |
| Sequre T55 | ❌ | ❌ | ✔️ | ❌ | ❌ | N/A | ✔️ | Full OLED resolution not yet supported. |
| Miniware TS80P | ❌ | ✔️ | ✔️ | ❌ | ❌ | N/A | ✔️ | |
| Miniware TS100 | ✔️ | ❌ | ❌ | ❌ | ❌ | ❌ | ❌\*\* | |
| Miniware TS80 | ❌ | ✔️ | ❌ | ❌ | ❌ | N/A | ❌\*\*\* | |
_Tip Sense_ refers to the device being able to choose between the _"regular"_ _TS100_ or _Hakko T12 style_ tips and _Pine64_'s custom shorter tips which have lower resistance and allow for more power. This is N/A for _TS80(P)_ as there is only one model of tip for them.
_Recommended Purchase_ is only referring to if you are buying a **new** device. Of course all the devices listed are supported and will work excellently for years to come.
The _TS101_ & _S60(P)_ irons and _MHP30_ & _T55_ plates feature a higher resolution OLED than other devices. Work is ongoing to support this fully, for now a cropped view is usable.
\* _PinecilV1_ stopped being manufactured a long time ago now, all models for sale online are generally clones (or old stock). Vendors are trying to sell these for more than _Pine64_ sells the _V2_ for now. Thus the _V1_ is **_no longer recommended_**.
\*\* Please note that _Miniware_ started shipping _TS100_'s using **cloned STM32 chips**. While these do work with _IronOS_, their **DFU bootloader** works terribly, and it is hard to get it to successfully flash larger firmware images like _IronOS_ without timing out. This is the main reason why the _TS100_ is **_no longer recommended_**.
\*\*\* _TS80_ is replaced by _TS80P_. Production ramped down a long time ago and it's just existing stock clearing the system. It's marked not recommended being optimistic that people might pause and buy the far superior _TS80P_ instead. This is the main reason why the _TS80_ is **_no longer recommended_**.
## Getting Started
To get started with _IronOS firmware_, please jump to [Getting Started Guide](https://ralim.github.io/IronOS/GettingStarted/).
## Installation
For notes on installation for your device, please refer to the flashing guide for your device:
- [MHP30](https://ralim.github.io/IronOS/Flashing/MHP30)
- [Pinecil V1](https://ralim.github.io/IronOS/Flashing/Pinecil%20V1/)
- [Pinecil V2](https://ralim.github.io/IronOS/Flashing/Pinecil%20V2/)
- [TS80 / TS80P](https://ralim.github.io/IronOS/Flashing/TS80%28P%29/)
- [TS100](https://ralim.github.io/IronOS/Flashing/TS100)
## Builds
The links in the table below allow to download available builds directly:
- current _Stable Release_ is **`v2.22`**;
- _Development Build_ **dynamically** provides _**the latest successful build**_ from **`dev`** branch.
| Device | Stable Release | Development Build |
|:---------------------:|:--------------:|:-----------------:|
| Pinecil V1 | [Pinecil.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/Pinecil.zip) | [Pinecil.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/Pinecil.zip) |
| Pinecil V1/multilang | [Pinecil_multi-lang.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/Pinecil_multi-lang.zip) | [Pinecil_multi-lang.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/Pinecil_multi-lang.zip) |
| Pinecil V2 | [PinecilV2.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/PinecilV2.zip) | [PinecilV2.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/Pinecilv2.zip) |
| Pinecil V2/multilang | [PinecilV2_multi-lang.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/PinecilV2_multi-lang.zip) | [PinecilV2_multi-lang.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/Pinecilv2_multi-lang.zip) |
| Miniware TS100 | [TS100.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/TS100.zip) | [TS100.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/TS100.zip) |
| Miniware TS101 | [TS101.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/TS101.zip) | [TS101.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/TS101.zip) |
| Miniware TS80 | [TS80.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/TS80.zip) | [TS80.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/TS80.zip) |
| Miniware TS80P | [TS80P.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/TS80P.zip) | [TS80P.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/TS80P.zip) |
| Miniware MHP30 | [MHP30.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/MHP30.zip) | [MHP30.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/MHP30.zip) |
| Sequre S60 | [S60.zip](https://github.com/Ralim/IronOS/releases/download/v2.22/S60.zip) | [S60.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/S60.zip) |
| Sequre S60P | Not Released | [S60P.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/S60P.zip) |
| Sequre T55 | Not Released | [T55.zip](https://nightly.link/Ralim/IronOS/workflows/push/dev/T55.zip) |
## Key Features
- PID style iron temperature control;
- automatic sleep with selectable sensitivity;
- adjustable & tweakable motion wake support;
- all settings exposed in the intuitive menu;
- (_TS100_) set a voltage lower limit for Lithium batteries so you don't kill your battery pack;
- (_TS80_) set 18W or 24W settings for your power bank;
- (_TS80P_) automatically negotiates appropriate PD and falls back to QC mode like _TS80_;
- (_Pinecil_) supports all 3 power modes (PD, QC, DC In);
- (_Pinecilv2_) supports _USB-PD EPR_ for **28V** operation;
- improved readability Fonts, supporting multiple languages;
- use hardware features to improve reliability;
- boost mode lets you temporarily change the temperature when soldering (i.e. raise the temperature for short periods);
- (_TS100_/_Pinecil_) battery charge level indicator if power source set to a LiPo cell count;
- (_TS80_/_TS80P_/_Pinecil_) power bank operating voltage is displayed;
- [custom boot up logo support](https://ralim.github.io/IronOS/Logo/)[^bootlogo];
- automatic LCD rotation based on the orientation;
- ... and many many other cool & hackable features![^changelog]
[^bootlogo]:
**BOOTUP LOGO NOTICE**:
IronOS supports both a bootup logo _AND_ bootup animations.
However, _**they are no longer included in this repo**_.
**Please, [read the docs](https://ralim.github.io/IronOS/Logo/) for more information**.
[^changelog]:
[See the full changelog here](https://ralim.github.io/IronOS/History).
## Basic Control
Supported device is controlled by two buttons which can be pressed in the following ways:
- short: ~1 second or so;
- long: more than 1 second;
- both (press & hold both of them together).
Available buttons are:
- `+/A` button: near the front closer to the tip (for irons) or on the left side of the device (for plates);
- `-/B` button: near the back far from the tip (for irons) or on the right side of the device (for plates).
After powering on the device for the first time with _IronOS_ installed and having the tip/plate plugged in, on the main menu in _standby mode_ the unit shows a pair of prompts for the two most common operations:
- pressing the `+/A` button enters the _soldering mode_;
- pressing the `-/B` button enters the _settings menu_;
- in _soldering mode_:
- short press of `+/A` / `-/B` buttons changes the soldering temperature;
- long press of the `+/A` button enables _boost mode_ (increasing soldering temperature to the adjustable setting as long as the button is pressed);
- long press of the `-/B` button enters _standby mode_ and stops heating;
- in _standby mode_:
- long press of the `+/A` button enters _soldering temperature adjust mode_ (the same as the one in the _soldering mode_, but allows to adjust the temperature before heating up);
- long hold of the `-/B` button enters the [_debug menu_](https://ralim.github.io/IronOS/DebugMenu/);
- in _menu mode_ (to make it short here):
- `-/B` scrolls & cycles through menus and submenus;
- `+/A` enters to menu & submenu settings or changes their values if they are activated already.
Additional details are described in the [menu information](https://ralim.github.io/IronOS/Menu/).
## Translations
Is your preferred language missing localisation of some of the text?
Translations are stored as `json` files in the `Translations` folder.
_Pull requests_ are loved and accepted to enhance the firmware.
## Thanks
If you love this firmware and want to continue my caffeine addiction, you can do so [here](https://paypal.me/RalimTek) (or email me for other options).
I also want to give a shout out to all of the [Fantastic Contributors](https://github.com/Ralim/IronOS/graphs/contributors).
Especially to the following users, who have helped in various ways that are massively appreciated:
- [Dhiltonp](https://github.com/dhiltonp)
- [Mrkvozrout](https://github.com/Mrkvozrout)
- [JonnieZG](https://github.com/jonnieZG)
- [Federck](https://github.com/federck)
- [Jvitkauskas](https://github.com/jvitkauskas)
- [Doegox](https://github.com/doegox)
- [Perillamint](https://github.com/perillamint)
- [GeminiServer](https://github.com/GeminiServer)
- [Patrick Horlebein](https://github.com/PixelPirate)
- [Firebie](https://github.com/Firebie)
- [Agatti](https://github.com/agatti)
- [Discip](https://github.com/discip)
- [Paul Fertser](https://github.com/paulfertser)
Plus the huge number of people who have contributed translations, your effort is massively appreciated.
## License
The code created by the community is covered by the [GNU GPLv3](https://www.gnu.org/licenses/gpl-3.0.html#license-text) license **unless noted elsewhere**.
Other components such as _FreeRTOS_ and _USB-PD_ have their own licenses.
## Commercial Use
This software is provided "AS IS", so I cannot provide any commercial support for the firmware.
However, you are more than welcome to distribute links to the firmware or provide hardware with this firmware.
**Please do not re-host the files, but rather link to this page, so that there are no old versions of the firmware scattered around**.
|
