1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
#include "HUB238.hpp"
#include "OperatingModes.h"
#if POW_PD_EXT == 1
#ifdef HAS_POWER_DEBUG_MENU
OperatingMode showPDDebug(const ButtonState buttons, guiContext *cxt) {
// Print out the USB-PD state
// Basically this is like the Debug menu, but instead we want to print out the PD status
uint8_t screen = 0;
ButtonState b;
for (;;) {
OLED::clearScreen(); // Ensure the buffer starts clean
OLED::setCursor(0, 0); // Position the cursor at the 0,0 (top left)
OLED::print(SmallSymbolPDDebug, FontStyle::SMALL); // Print Title
OLED::setCursor(0, 8); // second line
if (screen > 6) {
screen = 0;
}
if (screen == 0) {
// Print the PD Debug state
OLED::print(SmallSymbolState, FontStyle::SMALL);
OLED::print(SmallSymbolSpace, FontStyle::SMALL);
uint16_t temp = hub238_debug_state();
OLED::drawHex(temp, FontStyle::SMALL, 4);
OLED::print(SmallSymbolSpace, FontStyle::SMALL);
// Print current selected specs
temp = hub238_source_voltage();
OLED::printNumber(temp, 2, FontStyle::SMALL, true);
OLED::print(SmallSymbolSpace, FontStyle::SMALL);
} else {
// Print out the Proposed power options one by one
const uint8_t voltages[] = {5, 9, 12, 15, 18, 20};
uint16_t voltage = voltages[screen - 1];
uint16_t currentx100 = hub238_getVoltagePDOCurrent(voltage);
OLED::printNumber(voltage, 2, FontStyle::SMALL, true);
OLED::print(SmallSymbolSpace, FontStyle::SMALL);
OLED::printNumber(currentx100 / 100, 1, FontStyle::SMALL, true);
OLED::print(SmallSymbolDot, FontStyle::SMALL);
OLED::printNumber(currentx100 % 100, 2, FontStyle::SMALL, true);
}
OLED::refresh();
b = getButtonState();
if (b == BUTTON_B_SHORT) {
return OperatingMode::InitialisationDone;
} else if (b == BUTTON_F_SHORT) {
screen++;
}
GUIDelay();
}
return OperatingMode::UsbPDDebug;
}
#endif
#endif
|
