| Age | Commit message (Collapse) | Author |
|---|
|
Note that this is an unreleased feature.
Fixes #13151
|
|
general spring cleaning
There are some breaking changes in this commit, see #11455.
Closes #11455
Closes #11549
This fixes a set of bugs (see issue list) and it is also paying some technical debt accumulated over the years. We now build with Staticcheck enabled in the CI build.
The performance should be about the same as before for regular sized Hugo sites, but it should perform and scale much better to larger data sets, as objects that uses lots of memory (e.g. rendered Markdown, big JSON files read into maps with transform.Unmarshal etc.) will now get automatically garbage collected if needed. Performance on partial rebuilds when running the server in fast render mode should be the same, but the change detection should be much more accurate.
A list of the notable new features:
* A new dependency tracker that covers (almost) all of Hugo's API and is used to do fine grained partial rebuilds when running the server.
* A new and simpler tree document store which allows fast lookups and prefix-walking in all dimensions (e.g. language) concurrently.
* You can now configure an upper memory limit allowing for much larger data sets and/or running on lower specced PCs.
We have lifted the "no resources in sub folders" restriction for branch bundles (e.g. sections).
Memory Limit
* Hugos will, by default, set aside a quarter of the total system memory, but you can set this via the OS environment variable HUGO_MEMORYLIMIT (in gigabytes). This is backed by a partitioned LRU cache used throughout Hugo. A cache that gets dynamically resized in low memory situations, allowing Go's Garbage Collector to free the memory.
New Dependency Tracker: Hugo has had a rule based coarse grained approach to server rebuilds that has worked mostly pretty well, but there have been some surprises (e.g. stale content). This is now revamped with a new dependency tracker that can quickly calculate the delta given a changed resource (e.g. a content file, template, JS file etc.). This handles transitive relations, e.g. $page -> js.Build -> JS import, or $page1.Content -> render hook -> site.GetPage -> $page2.Title, or $page1.Content -> shortcode -> partial -> site.RegularPages -> $page2.Content -> shortcode ..., and should also handle changes to aggregated values (e.g. site.Lastmod) effectively.
This covers all of Hugo's API with 2 known exceptions (a list that may not be fully exhaustive):
Changes to files loaded with template func os.ReadFile may not be handled correctly. We recommend loading resources with resources.Get
Changes to Hugo objects (e.g. Page) passed in the template context to lang.Translate may not be detected correctly. We recommend having simple i18n templates without too much data context passed in other than simple types such as strings and numbers.
Note that the cachebuster configuration (when A changes then rebuild B) works well with the above, but we recommend that you revise that configuration, as it in most situations should not be needed. One example where it is still needed is with TailwindCSS and using changes to hugo_stats.json to trigger new CSS rebuilds.
Document Store: Previously, a little simplified, we split the document store (where we store pages and resources) in a tree per language. This worked pretty well, but the structure made some operations harder than they needed to be. We have now restructured it into one Radix tree for all languages. Internally the language is considered to be a dimension of that tree, and the tree can be viewed in all dimensions concurrently. This makes some operations re. language simpler (e.g. finding translations is just a slice range), but the idea is that it should also be relatively inexpensive to add more dimensions if needed (e.g. role).
Fixes #10169
Fixes #10364
Fixes #10482
Fixes #10630
Fixes #10656
Fixes #10694
Fixes #10918
Fixes #11262
Fixes #11439
Fixes #11453
Fixes #11457
Fixes #11466
Fixes #11540
Fixes #11551
Fixes #11556
Fixes #11654
Fixes #11661
Fixes #11663
Fixes #11664
Fixes #11669
Fixes #11671
Fixes #11807
Fixes #11808
Fixes #11809
Fixes #11815
Fixes #11840
Fixes #11853
Fixes #11860
Fixes #11883
Fixes #11904
Fixes #7388
Fixes #7425
Fixes #7436
Fixes #7544
Fixes #7882
Fixes #7960
Fixes #8255
Fixes #8307
Fixes #8863
Fixes #8927
Fixes #9192
Fixes #9324
|
|
by others
The motivation behind the original implementation was probably to show disabled modules when running `hugo mod graph`.
Fixes #11376
|
|
Fixes #11223
|
|
Fixes #10064
|
|
Primary motivation is documentation, but it will also hopefully simplify the code.
Also,
* Lower case the default output format names; this is in line with the custom ones (map keys) and how
it's treated all the places. This avoids doing `stringds.EqualFold` everywhere.
Closes #10896
Closes #10620
|
|
Fixes #9994
|
|
* Add file context to minifier errors when publishing
* Misc fixes (see issues)
* Allow custom server error template in layouts/server/error.html
To get to this, this commit also cleans up and simplifies the code surrounding errors and files. This also removes the usage of `github.com/pkg/errors`, mostly because of https://github.com/pkg/errors/issues/223 -- but also because most of this is now built-in to Go.
Fixes #9852
Fixes #9857
Fixes #9863
|
|
Fixes #9761
|
|
See #9626
|
|
Updates #9687
|
|
The main motivation behind this is simplicity and correctnes, but the new small config library is also faster:
```
BenchmarkDefaultConfigProvider/Viper-16 252418 4546 ns/op 2720 B/op 30 allocs/op
BenchmarkDefaultConfigProvider/Custom-16 450756 2651 ns/op 1008 B/op 6 allocs/op
```
Fixes #8633
Fixes #8618
Fixes #8630
Updates #8591
Closes #6680
Closes #5192
|
|
|
|
|
|
See https://github.com/mvdan/gofumpt
|
|
|
|
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
|
|
|
|
The main motivation of this commit is to add a `page.Page` interface to replace the very file-oriented `hugolib.Page` struct.
This is all a preparation step for issue #5074, "pages from other data sources".
But this also fixes a set of annoying limitations, especially related to custom output formats, and shortcodes.
Most notable changes:
* The inner content of shortcodes using the `{{%` as the outer-most delimiter will now be sent to the content renderer, e.g. Blackfriday.
This means that any markdown will partake in the global ToC and footnote context etc.
* The Custom Output formats are now "fully virtualized". This removes many of the current limitations.
* The taxonomy list type now has a reference to the `Page` object.
This improves the taxonomy template `.Title` situation and make common template constructs much simpler.
See #5074
Fixes #5763
Fixes #5758
Fixes #5090
Fixes #5204
Fixes #4695
Fixes #5607
Fixes #5707
Fixes #5719
Fixes #3113
Fixes #5706
Fixes #5767
Fixes #5723
Fixes #5769
Fixes #5770
Fixes #5771
Fixes #5759
Fixes #5776
Fixes #5777
Fixes #5778
|
|
|
|
This commit solves an issue where hugo would ignore the cli -t flag
and only use a theme defined in config.toml.
Also allow -t flag to accept a string slice.
Closes #5569
Closes #5061
Related #4868
|
|
This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are:
* A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`.
* A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable.
If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates.
Given the example tree below:
If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`).
```bash
config
├── _default
│ ├── config.toml
│ ├── languages.toml
│ ├── menus
│ │ ├── menus.en.toml
│ │ └── menus.zh.toml
│ └── params.toml
├── development
│ └── params.toml
└── production
├── config.toml
└── params.toml
```
Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`.
Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization.
We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed.
Fixes #5422
|
|
Fixes #5226
|
|
The main item in this commit is showing of errors with a file context when running `hugo server`.
This can be turned off: `hugo server --disableBrowserError` (can also be set in `config.toml`).
But to get there, the error handling in Hugo needed a revision. There are some items left TODO for commits soon to follow, most notable errors in content and config files.
Fixes #5284
Fixes #5290
See #5325
See #5324
|
|
|
|
Yesterday's commit was a little too agressive.
This commit makes sure that the duplication of resources to public/en etc. is only performed in multihost mode.
See #5058
|
|
In Hugo 0.46 we made the output of what you get from resources.Get and similar static, i.e. language agnostic. This makes total sense, as it is wasteful and time-consuming to do SASS/SCSS/PostCSS processing for lots of languages when the output is lots of duplicates with different filenames.
But since we now output the result once only, this had a negative side effect for multihost setups: We publish the resource once only to the root folder (i.e. not to the language "domain folder").
This commit removes the language code from the processed image keys. This creates less duplication in the file cache, but it means that you should do a `hugo --gc` to clean up stale files.
Fixes #5058
|
|
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes #4381
Fixes #4903
Fixes #4858
|
|
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
|
