aboutsummaryrefslogtreecommitdiffhomepage
path: root/hardware
AgeCommit message (Collapse)Author
2024-08-28Fix/cleanup the VSELECT Module project filesAncyker
* Fixed the field name for the LCSC part number so the BOM exports with the part numbers. * Removed the test points from the schematic as they are no longer needed. * Added notes for setting the ILIM resistor to the schematic. * Added an image of the PCB and PDF of the schematic. Note: The PCB itself didn't change, so it is still Rev 3.
2024-08-26VSELECT Module Rev 3Ancyker
Refreshed things a bit to improve clarity, make installation easier, and to reduce costs when manufacturing in bulk. There is no reason to upgrade already installed modules to this revision. * Changed the module to be installed on the back of the PCB again as it is much easier to install that way. * Added pad for the STAT pin. There's no real use for this at the moment. * Changed the layout slightly to allow room for all of the capacitors' legends. This should make things more clear when assembling a module by hand. * Changed the legends for the jumper pads to use the net name instead of the designator. This should make things easier during installation. * Added legends to specify 3.3V/5V for the pads that connect to the power switch footprint. Hopefully, this helps keep people from installing the module incorrectly. * Updated the TPS2113 footprint to the new one that allows using either the TSSOP or SON package. This should give more flexibility regarding part availability. * Changed part numbers to more readily available parts. This should reduce the cost of machine assembly.
2023-09-12Add Right N64 Adapter with Battery Access STEPBrendon Reyell
2023-08-04Add 12V rail for N64 + silkscreen updatesAncyker
Add a 12V rail for the N64 slot. This is not currently implemented, but as the six-slot adapter is the hardest of the 2 boards to upgrade having it now will save some effort for anyone wanting it in the future. It also makes it easier to externally supply 12V by attaching clips to the 12V and GND header pins. Also improved the silkscreen a bit to match the main PCB.
2023-07-16HW5 Main PCB, Revision 5Ancyker
* Migrated files to KiCad 7 * Added RTC * IC: Analog Devices Inc. DS3231MZ * Battery holder (CR1616): Keystone Electronics 3012 * Cleaned up traces * Changed ground fill to solid * Removed test pads and LCD solder jumper * Cleaned up/prettified silkscreen and logo * Cleaned up some footprints (more to come eventually) * Added 3D models for board display * Schematic image is now a PDF since it has 2 pages
2023-06-15Loopy adapter wiredRoger Braunstein
2023-06-14Blocking out Casio Loopy dumperRoger Braunstein
2023-04-02Minor fixes/changes to six-slot adapter and git repositoryAncyker
* Add JLCPCB order ID text to Six-Slot Adapter; you can select "specify location" for order number location when ordering from JLCPCB. It is placed so the SNES slot covers it. (PCB revision not incremented because it is only a minor change to the silkscreen.) * Added relative path for footprint and symbol libs to six-slot adapter project files. * Added footprint details/links to schematic symbols. * Added .gitignore and included most of the files that should remain local-only.
2023-03-09New OSCR Logo + Vselect built into main PCBAncyker
Also added symbol and footprint library links
2023-02-11Remove GB adaptersanni
2023-01-15Delete 5mm_standoff.stlsanni
2022-11-25Fix Vselect PCBAncyker
5V and 3.3V were backwards on the headers to connect to the main PCB. Note: If you already ordered the PCB it still can be used, just install it upside down.
2022-11-12Add Voltage Selection ModuleRemy Starshade
2022-10-17Change N64 controller connector pitch to 2.54mmsanni
2022-08-19Add Six Slot Adapter Rev2 (fixes CIC Reset)sanni
2022-08-11Add files via uploadsanni
2022-08-11Delete 5mm_standoff.stlsanni
2022-08-11Add files via uploadsanni
2022-08-01Update SNES adaptersanni
2022-07-30Add Right N64 Adapterducky92
Adds a right hand N64 Adapter - can print without supports - may print with better quality with supports
2022-07-30Replace Frame STL with non-error versionducky92
Replaces frame.stl with new design. 2 versions are being added. 1 Main PCB Stand - No N64 Adapter (functionally the same as frame.stl) 2 Main PCB Stand - Left N64 Adapter - same as 1 but with a modification to add a holder for the N64 Adapter to snap into
2022-07-30Add files via uploadsanni
2022-07-27Add files via uploadsanni
2022-07-23Fix errors in frame.stlsanni
2022-07-13Rename CIC adapter PCB prototypessanni
2022-07-13Update README.mdsanni
2022-07-13Update README.mdsanni
2022-07-13Add CIC adapter PCB prototypessanni
2022-06-21Update silkscreensanni
2022-06-21Add HW5 Rev. 3sanni
2022-06-18Add files via uploadsanni
2022-06-17Add files via uploadsanni
2022-06-17Add files via uploadsanni
2022-06-09Update README.mdsanni
2022-06-09Update README.mdsanni
2022-06-08Add files via uploadsanni
2022-06-08Add files via uploadsanni
2022-06-06Update README.mdsanni
2022-06-04Merge branch 'master' of https://github.com/sanni/cartreadersanni
2022-06-04Move switches to right sidesanni
2022-06-03Update README.mdsanni
2022-06-03Update README.mdsanni
2022-05-22HW5sanni
2022-05-22HW5sanni
2022-05-17 Add files via uploadsanni
2022-05-15Update README.mdsanni
2022-05-15Update README.mdsanni
2022-05-15Add files via uploadsanni
2022-05-13Add files via uploadsanni
2022-04-21Add mounting holes to Game Boy adaptersanni