aboutsummaryrefslogtreecommitdiffhomepage
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/machine/machine_rp2040_rtc.go2
-rw-r--r--src/machine/machine_rp2040_usb.go82
-rw-r--r--src/machine/machine_rp2350_usb.go82
-rw-r--r--src/machine/machine_rp2_2040.go32
-rw-r--r--src/machine/machine_rp2_2350.go24
-rw-r--r--src/machine/machine_rp2_clocks.go54
6 files changed, 138 insertions, 138 deletions
diff --git a/src/machine/machine_rp2040_rtc.go b/src/machine/machine_rp2040_rtc.go
index 072432fc0..192e187c0 100644
--- a/src/machine/machine_rp2040_rtc.go
+++ b/src/machine/machine_rp2040_rtc.go
@@ -97,7 +97,7 @@ func toAlarmTime(delay uint32) rtcTime {
func (rtc *rtcType) setDivider() {
// Get clk_rtc freq and make sure it is running
- rtcFreq := configuredFreq[ClkRTC]
+ rtcFreq := configuredFreq[clkRTC]
if rtcFreq == 0 {
panic("can not set RTC divider, clock is not running")
}
diff --git a/src/machine/machine_rp2040_usb.go b/src/machine/machine_rp2040_usb.go
index 6e6fd4962..ac7df9820 100644
--- a/src/machine/machine_rp2040_usb.go
+++ b/src/machine/machine_rp2040_usb.go
@@ -25,7 +25,7 @@ func (dev *USBDevice) Configure(config UARTConfig) {
unresetBlockWait(rp.RESETS_RESET_USBCTRL)
// Clear any previous state in dpram just in case
- usbDPSRAM.clear()
+ _usbDPSRAM.clear()
// Enable USB interrupt at processor
rp.USBCTRL_REGS.INTE.Set(0)
@@ -62,7 +62,7 @@ func handleUSBIRQ(intr interrupt.Interrupt) {
// Setup packet received
if (status & rp.USBCTRL_REGS_INTS_SETUP_REQ) > 0 {
rp.USBCTRL_REGS.SIE_STATUS.Set(rp.USBCTRL_REGS_SIE_STATUS_SETUP_REC)
- setup := usb.NewSetup(usbDPSRAM.setupBytes())
+ setup := usb.NewSetup(_usbDPSRAM.setupBytes())
ok := false
if (setup.BmRequestType & usb.REQUEST_TYPE) == usb.REQUEST_STANDARD {
@@ -136,34 +136,34 @@ func handleUSBIRQ(intr interrupt.Interrupt) {
func initEndpoint(ep, config uint32) {
val := uint32(usbEpControlEnable) | uint32(usbEpControlInterruptPerBuff)
- offset := ep*2*USBBufferLen + 0x100
+ offset := ep*2*usbBufferLen + 0x100
val |= offset
switch config {
case usb.ENDPOINT_TYPE_INTERRUPT | usb.EndpointIn:
val |= usbEpControlEndpointTypeInterrupt
- usbDPSRAM.EPxControl[ep].In.Set(val)
+ _usbDPSRAM.EPxControl[ep].In.Set(val)
case usb.ENDPOINT_TYPE_BULK | usb.EndpointOut:
val |= usbEpControlEndpointTypeBulk
- usbDPSRAM.EPxControl[ep].Out.Set(val)
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxControl[ep].Out.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
case usb.ENDPOINT_TYPE_INTERRUPT | usb.EndpointOut:
val |= usbEpControlEndpointTypeInterrupt
- usbDPSRAM.EPxControl[ep].Out.Set(val)
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxControl[ep].Out.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
case usb.ENDPOINT_TYPE_BULK | usb.EndpointIn:
val |= usbEpControlEndpointTypeBulk
- usbDPSRAM.EPxControl[ep].In.Set(val)
+ _usbDPSRAM.EPxControl[ep].In.Set(val)
case usb.ENDPOINT_TYPE_CONTROL:
val |= usbEpControlEndpointTypeControl
- usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBuf0CtrlData1Pid)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBuf0CtrlData1Pid)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
}
}
@@ -219,37 +219,37 @@ func ReceiveUSBControlPacket() ([cdcLineInfoSize]byte, error) {
var b [cdcLineInfoSize]byte
ep := 0
- for !usbDPSRAM.EPxBufferControl[ep].Out.HasBits(usbBuf0CtrlFull) {
+ for !_usbDPSRAM.EPxBufferControl[ep].Out.HasBits(usbBuf0CtrlFull) {
// TODO: timeout
}
- ctrl := usbDPSRAM.EPxBufferControl[ep].Out.Get()
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
+ ctrl := _usbDPSRAM.EPxBufferControl[ep].Out.Get()
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
sz := ctrl & usbBuf0CtrlLenMask
- copy(b[:], usbDPSRAM.EPxBuffer[ep].Buffer0[:sz])
+ copy(b[:], _usbDPSRAM.EPxBuffer[ep].Buffer0[:sz])
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
return b, nil
}
func handleEndpointRx(ep uint32) []byte {
- ctrl := usbDPSRAM.EPxBufferControl[ep].Out.Get()
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
+ ctrl := _usbDPSRAM.EPxBufferControl[ep].Out.Get()
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
sz := ctrl & usbBuf0CtrlLenMask
- return usbDPSRAM.EPxBuffer[ep].Buffer0[:sz]
+ return _usbDPSRAM.EPxBuffer[ep].Buffer0[:sz]
}
func handleEndpointRxComplete(ep uint32) {
epXdata0[ep] = !epXdata0[ep]
if epXdata0[ep] || ep == 0 {
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
}
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
}
func SendZlp() {
@@ -269,8 +269,8 @@ func sendViaEPIn(ep uint32, data []byte, count int) {
// Mark as full
val |= usbBuf0CtrlFull
- copy(usbDPSRAM.EPxBuffer[ep&0x7F].Buffer0[:], data[:count])
- usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
+ copy(_usbDPSRAM.EPxBuffer[ep&0x7F].Buffer0[:], data[:count])
+ _usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
}
func sendStallViaEPIn(ep uint32) {
@@ -279,41 +279,41 @@ func sendStallViaEPIn(ep uint32) {
rp.USBCTRL_REGS.EP_STALL_ARM.Set(rp.USBCTRL_REGS_EP_STALL_ARM_EP0_IN)
}
val := uint32(usbBuf0CtrlFull)
- usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
val |= uint32(usbBuf0CtrlStall)
- usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
}
-type USBDPSRAM struct {
+type usbDPSRAM struct {
// Note that EPxControl[0] is not EP0Control but 8-byte setup data.
- EPxControl [16]USBEndpointControlRegister
+ EPxControl [16]usbEndpointControlRegister
- EPxBufferControl [16]USBBufferControlRegister
+ EPxBufferControl [16]usbBufferControlRegister
- EPxBuffer [16]USBBuffer
+ EPxBuffer [16]usbBuffer
}
-type USBEndpointControlRegister struct {
+type usbEndpointControlRegister struct {
In volatile.Register32
Out volatile.Register32
}
-type USBBufferControlRegister struct {
+type usbBufferControlRegister struct {
In volatile.Register32
Out volatile.Register32
}
-type USBBuffer struct {
- Buffer0 [USBBufferLen]byte
- Buffer1 [USBBufferLen]byte
+type usbBuffer struct {
+ Buffer0 [usbBufferLen]byte
+ Buffer1 [usbBufferLen]byte
}
var (
- usbDPSRAM = (*USBDPSRAM)(unsafe.Pointer(uintptr(0x50100000)))
+ _usbDPSRAM = (*usbDPSRAM)(unsafe.Pointer(uintptr(0x50100000)))
epXdata0 [16]bool
setupBytes [8]byte
)
-func (d *USBDPSRAM) setupBytes() []byte {
+func (d *usbDPSRAM) setupBytes() []byte {
data := d.EPxControl[usb.CONTROL_ENDPOINT].In.Get()
setupBytes[0] = byte(data)
@@ -330,7 +330,7 @@ func (d *USBDPSRAM) setupBytes() []byte {
return setupBytes[:]
}
-func (d *USBDPSRAM) clear() {
+func (d *usbDPSRAM) clear() {
for i := 0; i < len(d.EPxControl); i++ {
d.EPxControl[i].In.Set(0)
d.EPxControl[i].Out.Set(0)
@@ -373,5 +373,5 @@ const (
usbBuf0CtrlAvail = 0x00000400
usbBuf0CtrlLenMask = 0x000003FF
- USBBufferLen = 64
+ usbBufferLen = 64
)
diff --git a/src/machine/machine_rp2350_usb.go b/src/machine/machine_rp2350_usb.go
index 9106b50f9..48fbbcbd0 100644
--- a/src/machine/machine_rp2350_usb.go
+++ b/src/machine/machine_rp2350_usb.go
@@ -25,7 +25,7 @@ func (dev *USBDevice) Configure(config UARTConfig) {
unresetBlockWait(rp.RESETS_RESET_USBCTRL)
// Clear any previous state in dpram just in case
- usbDPSRAM.clear()
+ _usbDPSRAM.clear()
// Enable USB interrupt at processor
rp.USB.INTE.Set(0)
@@ -65,7 +65,7 @@ func handleUSBIRQ(intr interrupt.Interrupt) {
// Setup packet received
if (status & rp.USB_INTS_SETUP_REQ) > 0 {
rp.USB.SIE_STATUS.Set(rp.USB_SIE_STATUS_SETUP_REC)
- setup := usb.NewSetup(usbDPSRAM.setupBytes())
+ setup := usb.NewSetup(_usbDPSRAM.setupBytes())
ok := false
if (setup.BmRequestType & usb.REQUEST_TYPE) == usb.REQUEST_STANDARD {
@@ -139,34 +139,34 @@ func handleUSBIRQ(intr interrupt.Interrupt) {
func initEndpoint(ep, config uint32) {
val := uint32(usbEpControlEnable) | uint32(usbEpControlInterruptPerBuff)
- offset := ep*2*USBBufferLen + 0x100
+ offset := ep*2*usbBufferLen + 0x100
val |= offset
switch config {
case usb.ENDPOINT_TYPE_INTERRUPT | usb.EndpointIn:
val |= usbEpControlEndpointTypeInterrupt
- usbDPSRAM.EPxControl[ep].In.Set(val)
+ _usbDPSRAM.EPxControl[ep].In.Set(val)
case usb.ENDPOINT_TYPE_BULK | usb.EndpointOut:
val |= usbEpControlEndpointTypeBulk
- usbDPSRAM.EPxControl[ep].Out.Set(val)
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxControl[ep].Out.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
case usb.ENDPOINT_TYPE_INTERRUPT | usb.EndpointOut:
val |= usbEpControlEndpointTypeInterrupt
- usbDPSRAM.EPxControl[ep].Out.Set(val)
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxControl[ep].Out.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
case usb.ENDPOINT_TYPE_BULK | usb.EndpointIn:
val |= usbEpControlEndpointTypeBulk
- usbDPSRAM.EPxControl[ep].In.Set(val)
+ _usbDPSRAM.EPxControl[ep].In.Set(val)
case usb.ENDPOINT_TYPE_CONTROL:
val |= usbEpControlEndpointTypeControl
- usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBuf0CtrlData1Pid)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBuf0CtrlData1Pid)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
}
}
@@ -222,37 +222,37 @@ func ReceiveUSBControlPacket() ([cdcLineInfoSize]byte, error) {
var b [cdcLineInfoSize]byte
ep := 0
- for !usbDPSRAM.EPxBufferControl[ep].Out.HasBits(usbBuf0CtrlFull) {
+ for !_usbDPSRAM.EPxBufferControl[ep].Out.HasBits(usbBuf0CtrlFull) {
// TODO: timeout
}
- ctrl := usbDPSRAM.EPxBufferControl[ep].Out.Get()
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
+ ctrl := _usbDPSRAM.EPxBufferControl[ep].Out.Get()
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
sz := ctrl & usbBuf0CtrlLenMask
- copy(b[:], usbDPSRAM.EPxBuffer[ep].Buffer0[:sz])
+ copy(b[:], _usbDPSRAM.EPxBuffer[ep].Buffer0[:sz])
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
return b, nil
}
func handleEndpointRx(ep uint32) []byte {
- ctrl := usbDPSRAM.EPxBufferControl[ep].Out.Get()
- usbDPSRAM.EPxBufferControl[ep].Out.Set(USBBufferLen & usbBuf0CtrlLenMask)
+ ctrl := _usbDPSRAM.EPxBufferControl[ep].Out.Get()
+ _usbDPSRAM.EPxBufferControl[ep].Out.Set(usbBufferLen & usbBuf0CtrlLenMask)
sz := ctrl & usbBuf0CtrlLenMask
- return usbDPSRAM.EPxBuffer[ep].Buffer0[:sz]
+ return _usbDPSRAM.EPxBuffer[ep].Buffer0[:sz]
}
func handleEndpointRxComplete(ep uint32) {
epXdata0[ep] = !epXdata0[ep]
if epXdata0[ep] || ep == 0 {
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlData1Pid)
}
- usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
+ _usbDPSRAM.EPxBufferControl[ep].Out.SetBits(usbBuf0CtrlAvail)
}
func SendZlp() {
@@ -272,8 +272,8 @@ func sendViaEPIn(ep uint32, data []byte, count int) {
// Mark as full
val |= usbBuf0CtrlFull
- copy(usbDPSRAM.EPxBuffer[ep&0x7F].Buffer0[:], data[:count])
- usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
+ copy(_usbDPSRAM.EPxBuffer[ep&0x7F].Buffer0[:], data[:count])
+ _usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
}
func sendStallViaEPIn(ep uint32) {
@@ -282,41 +282,41 @@ func sendStallViaEPIn(ep uint32) {
rp.USB.EP_STALL_ARM.Set(rp.USB_EP_STALL_ARM_EP0_IN)
}
val := uint32(usbBuf0CtrlFull)
- usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
val |= uint32(usbBuf0CtrlStall)
- usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
+ _usbDPSRAM.EPxBufferControl[ep&0x7F].In.Set(val)
}
-type USBDPSRAM struct {
+type usbDPSRAM struct {
// Note that EPxControl[0] is not EP0Control but 8-byte setup data.
- EPxControl [16]USBEndpointControlRegister
+ EPxControl [16]usbEndpointControlRegister
- EPxBufferControl [16]USBBufferControlRegister
+ EPxBufferControl [16]usbBufferControlRegister
- EPxBuffer [16]USBBuffer
+ EPxBuffer [16]usbBuffer
}
-type USBEndpointControlRegister struct {
+type usbEndpointControlRegister struct {
In volatile.Register32
Out volatile.Register32
}
-type USBBufferControlRegister struct {
+type usbBufferControlRegister struct {
In volatile.Register32
Out volatile.Register32
}
-type USBBuffer struct {
- Buffer0 [USBBufferLen]byte
- Buffer1 [USBBufferLen]byte
+type usbBuffer struct {
+ Buffer0 [usbBufferLen]byte
+ Buffer1 [usbBufferLen]byte
}
var (
- usbDPSRAM = (*USBDPSRAM)(unsafe.Pointer(uintptr(0x50100000)))
+ _usbDPSRAM = (*usbDPSRAM)(unsafe.Pointer(uintptr(0x50100000)))
epXdata0 [16]bool
setupBytes [8]byte
)
-func (d *USBDPSRAM) setupBytes() []byte {
+func (d *usbDPSRAM) setupBytes() []byte {
data := d.EPxControl[usb.CONTROL_ENDPOINT].In.Get()
setupBytes[0] = byte(data)
@@ -333,7 +333,7 @@ func (d *USBDPSRAM) setupBytes() []byte {
return setupBytes[:]
}
-func (d *USBDPSRAM) clear() {
+func (d *usbDPSRAM) clear() {
for i := 0; i < len(d.EPxControl); i++ {
d.EPxControl[i].In.Set(0)
d.EPxControl[i].Out.Set(0)
@@ -376,5 +376,5 @@ const (
usbBuf0CtrlAvail = 0x00000400
usbBuf0CtrlLenMask = 0x000003FF
- USBBufferLen = 64
+ usbBufferLen = 64
)
diff --git a/src/machine/machine_rp2_2040.go b/src/machine/machine_rp2_2040.go
index c82b08483..484d8e923 100644
--- a/src/machine/machine_rp2_2040.go
+++ b/src/machine/machine_rp2_2040.go
@@ -46,26 +46,26 @@ const (
)
const (
- ClkGPOUT0 clockIndex = iota // GPIO Muxing 0
- ClkGPOUT1 // GPIO Muxing 1
- ClkGPOUT2 // GPIO Muxing 2
- ClkGPOUT3 // GPIO Muxing 3
- ClkRef // Watchdog and timers reference clock
- ClkSys // Processors, bus fabric, memory, memory mapped registers
- ClkPeri // Peripheral clock for UART and SPI
- ClkUSB // USB clock
- ClkADC // ADC clock
- ClkRTC // Real time clock
- NumClocks
+ clkGPOUT0 clockIndex = iota // GPIO Muxing 0
+ clkGPOUT1 // GPIO Muxing 1
+ clkGPOUT2 // GPIO Muxing 2
+ clkGPOUT3 // GPIO Muxing 3
+ clkRef // Watchdog and timers reference clock
+ clkSys // Processors, bus fabric, memory, memory mapped registers
+ clkPeri // Peripheral clock for UART and SPI
+ clkUSB // USB clock
+ clkADC // ADC clock
+ clkRTC // Real time clock
+ numClocks
)
-func CalcClockDiv(srcFreq, freq uint32) uint32 {
+func calcClockDiv(srcFreq, freq uint32) uint32 {
// Div register is 24.8 int.frac divider so multiply by 2^8 (left shift by 8)
return uint32((uint64(srcFreq) << 8) / uint64(freq))
}
type clocksType struct {
- clk [NumClocks]clockType
+ clk [numClocks]clockType
resus struct {
ctrl volatile.Register32
status volatile.Register32
@@ -180,9 +180,9 @@ func irqSetMask(mask uint32, enabled bool) {
}
func (clks *clocksType) initRTC() {
- // ClkRTC = pllUSB (48MHz) / 1024 = 46875Hz
- clkrtc := clks.clock(ClkRTC)
- clkrtc.configure(0, // No GLMUX
+ // clkRTC = pllUSB (48MHz) / 1024 = 46875Hz
+ crtc := clks.clock(clkRTC)
+ crtc.configure(0, // No GLMUX
rp.CLOCKS_CLK_RTC_CTRL_AUXSRC_CLKSRC_PLL_USB,
48*MHz,
46875)
diff --git a/src/machine/machine_rp2_2350.go b/src/machine/machine_rp2_2350.go
index 54fc62b47..4e12bebe3 100644
--- a/src/machine/machine_rp2_2350.go
+++ b/src/machine/machine_rp2_2350.go
@@ -49,26 +49,26 @@ const (
)
const (
- ClkGPOUT0 clockIndex = iota // GPIO Muxing 0
- ClkGPOUT1 // GPIO Muxing 1
- ClkGPOUT2 // GPIO Muxing 2
- ClkGPOUT3 // GPIO Muxing 3
- ClkRef // Watchdog and timers reference clock
- ClkSys // Processors, bus fabric, memory, memory mapped registers
- ClkPeri // Peripheral clock for UART and SPI
+ clkGPOUT0 clockIndex = iota // GPIO Muxing 0
+ clkGPOUT1 // GPIO Muxing 1
+ clkGPOUT2 // GPIO Muxing 2
+ clkGPOUT3 // GPIO Muxing 3
+ clkRef // Watchdog and timers reference clock
+ clkSys // Processors, bus fabric, memory, memory mapped registers
+ clkPeri // Peripheral clock for UART and SPI
ClkHSTX // High speed interface
- ClkUSB // USB clock
- ClkADC // ADC clock
- NumClocks
+ clkUSB // USB clock
+ clkADC // ADC clock
+ numClocks
)
-func CalcClockDiv(srcFreq, freq uint32) uint32 {
+func calcClockDiv(srcFreq, freq uint32) uint32 {
// Div register is 4.16 int.frac divider so multiply by 2^16 (left shift by 16)
return uint32((uint64(srcFreq) << 16) / uint64(freq))
}
type clocksType struct {
- clk [NumClocks]clockType
+ clk [numClocks]clockType
dftclk_xosc_ctrl volatile.Register32
dftclk_rosc_ctrl volatile.Register32
dftclk_lposc_ctrl volatile.Register32
diff --git a/src/machine/machine_rp2_clocks.go b/src/machine/machine_rp2_clocks.go
index ad2c6517f..cc152a7f8 100644
--- a/src/machine/machine_rp2_clocks.go
+++ b/src/machine/machine_rp2_clocks.go
@@ -41,7 +41,7 @@ type fc struct {
var clocks = (*clocksType)(unsafe.Pointer(rp.CLOCKS))
-var configuredFreq [NumClocks]uint32
+var configuredFreq [numClocks]uint32
type clock struct {
*clockType
@@ -68,7 +68,7 @@ func (clks *clocksType) clock(cix clockIndex) clock {
//
// Not all clocks have both types of mux.
func (clk *clock) hasGlitchlessMux() bool {
- return clk.cix == ClkSys || clk.cix == ClkRef
+ return clk.cix == clkSys || clk.cix == clkRef
}
// configure configures the clock by selecting the main clock source src
@@ -80,7 +80,7 @@ func (clk *clock) configure(src, auxsrc, srcFreq, freq uint32) {
panic("clock frequency cannot be greater than source frequency")
}
- div := CalcClockDiv(srcFreq, freq)
+ div := calcClockDiv(srcFreq, freq)
// If increasing divisor, set divisor before source. Otherwise set source
// before divisor. This avoids a momentary overspeed when e.g. switching
@@ -99,16 +99,16 @@ func (clk *clock) configure(src, auxsrc, srcFreq, freq uint32) {
} else
// If no glitchless mux, cleanly stop the clock to avoid glitches
// propagating when changing aux mux. Note it would be a really bad idea
- // to do this on one of the glitchless clocks (ClkSys, ClkRef).
+ // to do this on one of the glitchless clocks (clkSys, clkRef).
{
- // Disable clock. On ClkRef and ClkSys this does nothing,
+ // Disable clock. On clkRef and ClkSys this does nothing,
// all other clocks have the ENABLE bit in the same position.
clk.ctrl.ClearBits(rp.CLOCKS_CLK_GPOUT0_CTRL_ENABLE_Msk)
if configuredFreq[clk.cix] > 0 {
// Delay for 3 cycles of the target clock, for ENABLE propagation.
// Note XOSC_COUNT is not helpful here because XOSC is not
// necessarily running, nor is timer... so, 3 cycles per loop:
- delayCyc := configuredFreq[ClkSys]/configuredFreq[clk.cix] + 1
+ delayCyc := configuredFreq[clkSys]/configuredFreq[clk.cix] + 1
for delayCyc != 0 {
// This could be done more efficiently but TinyGo inline
// assembly is not yet capable enough to express that. In the
@@ -130,7 +130,7 @@ func (clk *clock) configure(src, auxsrc, srcFreq, freq uint32) {
}
}
- // Enable clock. On ClkRef and ClkSys this does nothing,
+ // Enable clock. On clkRef and clkSys this does nothing,
// all other clocks have the ENABLE bit in the same position.
clk.ctrl.SetBits(rp.CLOCKS_CLK_GPOUT0_CTRL_ENABLE)
@@ -157,12 +157,12 @@ func (clks *clocksType) init() {
xosc.init()
// Before we touch PLLs, switch sys and ref cleanly away from their aux sources.
- clks.clk[ClkSys].ctrl.ClearBits(rp.CLOCKS_CLK_SYS_CTRL_SRC_Msk)
- for !clks.clk[ClkSys].selected.HasBits(0x1) {
+ clks.clk[clkSys].ctrl.ClearBits(rp.CLOCKS_CLK_SYS_CTRL_SRC_Msk)
+ for !clks.clk[clkSys].selected.HasBits(0x1) {
}
- clks.clk[ClkRef].ctrl.ClearBits(rp.CLOCKS_CLK_REF_CTRL_SRC_Msk)
- for !clks.clk[ClkRef].selected.HasBits(0x1) {
+ clks.clk[clkRef].ctrl.ClearBits(rp.CLOCKS_CLK_REF_CTRL_SRC_Msk)
+ for !clks.clk[clkRef].selected.HasBits(0x1) {
}
// Configure PLLs
@@ -173,41 +173,41 @@ func (clks *clocksType) init() {
pllUSB.init(1, 480*MHz, 5, 2)
// Configure clocks
- // ClkRef = xosc (12MHz) / 1 = 12MHz
- clkref := clks.clock(ClkRef)
- clkref.configure(rp.CLOCKS_CLK_REF_CTRL_SRC_XOSC_CLKSRC,
+ // clkRef = xosc (12MHz) / 1 = 12MHz
+ cref := clks.clock(clkRef)
+ cref.configure(rp.CLOCKS_CLK_REF_CTRL_SRC_XOSC_CLKSRC,
0, // No aux mux
12*MHz,
12*MHz)
- // ClkSys = pllSys (125MHz) / 1 = 125MHz
- clksys := clks.clock(ClkSys)
- clksys.configure(rp.CLOCKS_CLK_SYS_CTRL_SRC_CLKSRC_CLK_SYS_AUX,
+ // clkSys = pllSys (125MHz) / 1 = 125MHz
+ csys := clks.clock(clkSys)
+ csys.configure(rp.CLOCKS_CLK_SYS_CTRL_SRC_CLKSRC_CLK_SYS_AUX,
rp.CLOCKS_CLK_SYS_CTRL_AUXSRC_CLKSRC_PLL_SYS,
125*MHz,
125*MHz)
- // ClkUSB = pllUSB (48MHz) / 1 = 48MHz
- clkusb := clks.clock(ClkUSB)
- clkusb.configure(0, // No GLMUX
+ // clkUSB = pllUSB (48MHz) / 1 = 48MHz
+ cusb := clks.clock(clkUSB)
+ cusb.configure(0, // No GLMUX
rp.CLOCKS_CLK_USB_CTRL_AUXSRC_CLKSRC_PLL_USB,
48*MHz,
48*MHz)
- // ClkADC = pllUSB (48MHZ) / 1 = 48MHz
- clkadc := clks.clock(ClkADC)
- clkadc.configure(0, // No GLMUX
+ // clkADC = pllUSB (48MHZ) / 1 = 48MHz
+ cadc := clks.clock(clkADC)
+ cadc.configure(0, // No GLMUX
rp.CLOCKS_CLK_ADC_CTRL_AUXSRC_CLKSRC_PLL_USB,
48*MHz,
48*MHz)
clks.initRTC()
- // ClkPeri = ClkSys. Used as reference clock for Peripherals.
+ // clkPeri = clkSys. Used as reference clock for Peripherals.
// No dividers so just select and enable.
- // Normally choose ClkSys or ClkUSB.
- clkperi := clks.clock(ClkPeri)
- clkperi.configure(0,
+ // Normally choose clkSys or clkUSB.
+ cperi := clks.clock(clkPeri)
+ cperi.configure(0,
rp.CLOCKS_CLK_PERI_CTRL_AUXSRC_CLK_SYS,
125*MHz,
125*MHz)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 12:35:04 +0000